HV Process Model of Software Development

Software Development Life Cycle (SDLC) is one of the major ingredients for the development of efficient software systems within a time frame and low-cost involvement. From the literature, it is evident that there are various kinds of process models that are used by the software industries for the development of small, medium and long-term software projects, but many of them do not cover risk management. It is quite obvious that the improper selection of the software development process model leads to failure of the software products as it is time bound activity. In the present work, a new software development process model is proposed which covers the risks at any stage of the development of the software product. The model is named a Hemant-Vipin (HV) process model and may be helpful for the software industries for development of the efficient software products and timely delivery at the end of the client. The efficiency of the HV process model is observed by considering various kinds of factors like requirement clarity, user feedback, change agility, predictability, risk identification, practical implementation, customer satisfaction, incremental development, use of ready-made components, quick design, resource organization and many more and found through a case study that the presented approach covers many of parameters in comparison of the existing process models. .

Discrete Software Reliability Growth Modeling for Errors of Different Severity Incorporating Change-point Concept

Several software reliability growth models （SRGM） have been developed to monitor the reliability growth during the testing phase of software development. In most of the existing research available in the literatures, it is considered that a similar testing effort is required on each debugging effort. However, in practice, different types of faults may require different amounts of testing efforts for their detection and removal. Consequently, faults are classified into three categories on the basis of severity： simple, hard and complex. This categorization may be extended to r type of faults on the basis of severity. Although some existing research in the literatures has incorporated this concept that fault removal rate （FRR） is different for different types of faults, they assume that the FRR remains constant during the overall testing period. On the contrary, it has been observed that as testing progresses, FRR changes due to changing testing strategy, skill, environment and personnel resources. In this paper, a general discrete SRGM is proposed for errors of different severity in software systems using the change-point concept. Then, the models are formulated for two particular environments. The models were validated on two real-life data sets. The results show better fit and wider applicability of the proposed models as to different types of failure datasets.

Web software reliability modeling with random impulsive shocks

As the web-server based business is rapidly developed and popularized, how to evaluate and improve the reliability of web-servers has been extremely important. Although a large num- ber of software reliability growth models （SRGMs）, including those combined with multiple change-points （CPs）, have been available, these conventional SRGMs cannot be directly applied to web soft- ware reliability analysis because of the complex web operational profile. To characterize the web operational profile precisely, it should be realized that the workload of a web server is normally non-homogeneous and often observed with the pattern of random impulsive shocks. A web software reliability model with random im- pulsive shocks and its statistical analysis method are developed. In the proposed model, the web server workload is characterized by a geometric Brownian motion process. Based on a real data set from IIS server logs of ICRMS website （www.icrms.cn）, the proposed model is demonstrated to be powerful for estimating impulsive shocks and web software reliability.

Software Coupling and Cohesion Model for Measuring the Quality of Software Components

Measuring software quality requires software engineers to understand the system’s quality attributes and their measurements.The quality attribute is a qualitative property;however,the quantitative feature is needed for software measurement,which is not considered during the development of most software systems.Many research studies have investigated different approaches for measuring software quality,but with no practical approaches to quantify and measure quality attributes.This paper proposes a software quality measurement model,based on a software interconnection model,to measure the quality of software components and the overall quality of the software system.Unlike most of the existing approaches,the proposed approach can be applied at the early stages of software development,to different architectural design models,and at different levels of system decomposition.This article introduces a software measurement model that uses a heuristic normalization of the software’s internal quality attributes,i.e.,coupling and cohesion,for software quality measurement.In this model,the quality of a software component is measured based on its internal strength and the coupling it exhibits with other component(s).The proposed model has been experimented with nine software engineering teams that have agreed to participate in the experiment during the development of their different software systems.The experiments have shown that coupling reduces the internal strength of the coupled components by the amount of coupling they exhibit,which degrades their quality and the overall quality of the software system.The introduced model can help in understanding the quality of software design.In addition,it identifies the locations in software design that exhibit unnecessary couplings that degrade the quality of the software systems,which can be eliminated.

Review of Software Model-Checking Techniques for Dealing with Error Detection in Program Codes

Debugging software code has been a challenge for software developers since the early days of computer programming. A simple need, because the world is run by software. So perhaps the biggest engineering challenge is finding ways to make software more reliable. This review provides an overview of techniques developed over time in the field of software model checking to solve the problem of detecting errors in program code. In addition, the challenges posed by this technology are discussed and ways to mitigate them in future research and applications are proposed. A comprehensive examination of the various model verification methods used to detect program code errors is intended to lay the foundation for future research in this area.

Incorporating S-shaped testing-effort functions into NHPP software reliability model with imperfect debugging

Testing-effort（TE） and imperfect debugging（ID） in the reliability modeling process may further improve the fitting and prediction results of software reliability growth models（SRGMs）. For describing the S-shaped varying trend of TE increasing rate more accurately, first, two S-shaped testing-effort functions（TEFs）, i.e.,delayed S-shaped TEF（DS-TEF） and inflected S-shaped TEF（IS-TEF）, are proposed. Then these two TEFs are incorporated into various types（exponential-type, delayed S-shaped and inflected S-shaped） of non-homogeneous Poisson process（NHPP）SRGMs with two forms of ID respectively for obtaining a series of new NHPP SRGMs which consider S-shaped TEFs as well as ID. Finally these new SRGMs and several comparison NHPP SRGMs are applied into four real failure data-sets respectively for investigating the fitting and prediction power of these new SRGMs.The experimental results show that：（i） the proposed IS-TEF is more suitable and flexible for describing the consumption of TE than the previous TEFs;（ii） incorporating TEFs into the inflected S-shaped NHPP SRGM may be more effective and appropriate compared with the exponential-type and the delayed S-shaped NHPP SRGMs;（iii） the inflected S-shaped NHPP SRGM considering both IS-TEF and ID yields the most accurate fitting and prediction results than the other comparison NHPP SRGMs.

Model for Software Behaviour Detection Based on Process Algebra and System Call

Behaviour detection models based on automata have been studied widely. By add- ing edge ε, the local automata are combined into global automata to describe and detect soft- ware behaviour. However, these methods in- troduce nondeterminacy, leading to models that are imprecise or inefficient. We present a model of software Behaviour Detection based on Process Algebra and system call （BDPA）. In this model, a system call is mapped into an action, and a function is mapped into a process We construct a process expression for each function to describe its behaviour. Without con- strutting automata or introducing nondeter- minacy, we use algebraic properties and algo- rithms to obtain a global process expression by combining the process expressions derived from each function. Behaviour detection rules and methods based on BDPA are determined by equivalence theory. Experiments demon- strate that the BDPA model has better preci- sion and efficiency than traditional methods.

Grey-based approach for estimating software reliability under nonhomogeneous Poisson process

Due to the randomness and time dependence of the factors affecting software reliability, most software reliability models are treated as stochastic processes, and the non-homogeneous Poisson process(NHPP) is the most used one.However, the failure behavior of software does not follow the NHPP in a statistically rigorous manner, and the pure random method might be not enough to describe the software failure behavior. To solve these problems, this paper proposes a new integrated approach that combines stochastic process and grey system theory to describe the failure behavior of software. A grey NHPP software reliability model is put forward in a discrete form, and a grey-based approach for estimating software reliability under the NHPP is proposed as a nonlinear multi-objective programming problem. Finally, four grey NHPP software reliability models are applied to four real datasets, the dynamic R-square and predictive relative error are calculated. Comparing with the original single NHPP software reliability model, it is found that the modeling using the integrated approach has a higher prediction accuracy of software reliability. Therefore, there is the characteristics of grey uncertain information in the NHPP software reliability models, and exploiting the latent grey uncertain information might lead to more accurate software reliability estimation.

Singularity of Some Software Reliability Models and Parameter Estimation Method

According to the principle, “The failure data is the basis of software reliability analysis”, we built a software reliability expert system (SRES) by adopting the artificial intelligence technology. By reasoning out the conclusion from the fitting results of failure data of a software project, the SRES can recommend users “the most suitable model” as a software reliability measurement model. We believe that the SRES can overcome the inconsistency in applications of software reliability models well. We report investigation results of singularity and parameter estimation methods of experimental models in SRES.

Component-based software reliability process simulation considering imperfect debugging

In view of the flaws of component-based software （CBS） reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS reliability simulation process is presented incorporating the imperfect debugging and the limitation of debugging resources. Considering the effect of imperfect debugging on fault detec- tion and correction process, a CBS integration testing model is sketched by multi-queue muhichannel and finite server queuing model （MMFSQM）. Compared with the analytical method based on pa- rameters and other nonparametric approaches, the simulation approach can relax more of the usual reliability modeling assumptions and effectively expound integration testing process of CBS. Then, CBS reliability process simulation procedure is developed accordingly. The proposed simulation ap- proach is validated to be sound and effective by simulation experiment studies and analysis.

Assessment and Prediction of Software Reliability in Mobile Applications

Software reliability is an important quality attribute, and software reliability models are frequently used to measure and predict software maturity. The nature of mobile environments differs from that of PC and server environments due to many factors, such as the network, energy, battery, and compatibility. Evaluating and predicting mobile application reliability are real challenges because of the diversity of the mobile environments in which the applications are used, and the lack of publicly available defect data. In addition, bug reports are optionally submitted by end-users. In this paper, we propose assessing and predicting the reliability of a mobile application using known software reliability growth models (SRGMs). Four software reliability models are used to evaluate the reliability of an open-source mobile application through analyzing bug reports. Our experiment proves it is possible to use SRGMs with defect data acquired from bug reports to assess and predict the software reliability in mobile applications. The results of our work enable software developers and testers to assess and predict the reliability of mobile software applications.

A software cost model with maintenance and risk costs for safety-critical systems

According to the consequences of software failures, software faults remaining in safety-critical systems can be classified into two sets： common faults and fatal faults. Common faults cause slight loss when they are activated. A fatal fault can lead to significant loss, and even damage the safety-crltical system entirely when it is activated. A software reliability growth model for safety-critical systems is developed based on G - 0 model. And a software cost model is proposed too. The cost model considers maintenance and risk costs due to software failures. The optimal release policies are discussed to minimize the total software cost. A numerical exampie is provided to illustrate how to use the results we obtained.

Quasi-Bayesian software reliability model with small samples

In traditional Bayesian software reliability models, it was assume that all probabilities are precise. In practical applications the parameters of the probability distributions are often under uncertainty due to strong dependence on subjective information of experts＇ judgments on sparse statistical data. In this paper, a quasi-Bayesian software reliability model using interval-valued probabilities to clearly quantify experts＇ prior beliefs on possible intervals of the parameters of the probability distributions is presented. The model integrates experts＇ judgments with statistical data to obtain more convincible assessments of software reliability with small samples. For some actual data sets, the presented model yields better predictions than the Jelinski-Moranda （JM） model using maximum likelihood （ML）.

Singularity of Software Reliability Models LVLM and LVQM

According to the principle, “The failure data is the basis of software reliabilityanalysis”, we built a software reliability expert system (SRES) by adopting the artificialtechnology. By reasoning out the conclusion from the fitting results of failure data of asoftware project, the SRES can recommend users “the most suitable model” as a softwarereliability measurement model. We believe that the SRES can overcome the inconsistency inapplications of software reliability models well. We report investigation results of singularity and parameter estimation methods of models, LVLM and LVQM.

The Applications of Evolutionary Computation in Software Reliability

Software reliability models(SRMs) are the theoretic foundation of software reliability. However, the existence of intrinsic limitation of the preposition in traditional model building confines the applications of SRMs. In this paper, a new method,evolutionary computation,is used to estimate parameters of SRMs .At the same time, new algorithms are also proposed and employed to build SRMs. As the experiment results demonstrate, evolutionary computation method is po'verful and effective.

Reliability Growth Modeling and Optimal Release Policy Under Fuzzy Environment of an N-version Programming System Incorporating the Effect of Fault Removal Efficiency

Failure of a safety critical system can lead to big losses. Very high software reliability is required for automating the working of systems such as aircraft controller and nuclear reactor controller software systems. Fault-tolerant softwares are used to increase the overall reliability of software systems. Fault tolerance is achieved using the fault-tolerant schemes such as fault recovery （recovery block scheme）, fault masking （N-version programming （NVP）） or a combination of both （Hybrid scheme）. These softwares incorporate the ability of system survival even on a failure. Many researchers in the field of software engineering have done excellent work to study the reliability of fault-tolerant systems. Most of them consider the stable system reliability. Few attempts have been made in reliability modeling to study the reliability growth for an NVP system. Recently, a model was proposed to analyze the reliability growth of an NVP system incorporating the effect of fault removal efficiency. In this model, a proportion of the number of failures is assumed to be a measure of fault generation while an appropriate measure of fault generation should be the proportion of faults removed. In this paper, we first propose a testing efficiency model incorporating the effect of imperfect fault debugging and error generation. Using this model, a software reliability growth model （SRGM） is developed to model the reliability growth of an NVP system. The proposed model is useful for practical applications and can provide the measures of debugging effectiveness and additional workload or skilled professional required. It is very important for a developer to determine the optimal release time of the software to improve its performance in terms of competition and cost. In this paper, we also formulate the optimal software release time problem for a 3VP system under fuzzy environment and discuss a the fuzzy optimization technique for solving the problem with a numerical illustration.

A FGR Software Model for Measuring the Effect of Technological Progress

The work of quantitative studying the effect of technological progress on economic growth, being of great complexity and far-reaching significance, has become a quite popular research topic in the world. In recent years there are a large number of scientists who are engaged in this research both at home and abroad.

Early Stage Software Reliability Estimation with Stochastic Reward Nets

This paper presents software reliability modeling issues at the early stage of a software development for fault tolerant software management system. Based on Stochastic Reward Nets, an effective model of hierarchical view for a fault tolerant software management system is put forward, and an approach that consists of system transient performance analysis is adopted. A quantitative approach for software reliability analysis is given. The results show its usefulness for the design and evaluation of the early-stage software reliability modeling when failure data is not available.

One-Sample Bayesian Predictive Analyses for a Nonhomogeneous Poisson Process with Delayed S-Shaped Intensity Function Using Non-Informative Priors

The delayed S-shaped software reliability growth model (SRGM) is one of the non-homogeneous Poisson process (NHPP) models which have been proposed for software reliability assessment. The model is distinctive because it has a mean value function that reflects the delay in failure reporting: there is a delay between failure detection and reporting time. The model captures error detection, isolation, and removal processes, thus is appropriate for software reliability analysis. Predictive analysis in software testing is useful in modifying, debugging, and determining when to terminate software development testing processes. However, Bayesian predictive analyses on the delayed S-shaped model have not been extensively explored. This paper uses the delayed S-shaped SRGM to address four issues in one-sample prediction associated with the software development testing process. Bayesian approach based on non-informative priors was used to derive explicit solutions for the four issues, and the developed methodologies were illustrated using real data.

Towards Efficient Robotic Software Development by Reusing Behavior Tree Structures for Task Planning Paradigms

interaction pipelines while maintaining interfaces for task-specific customization.The Structural-BT framework supports the modular design of structure functionalities and allows easy extensibility of the inner planning flows between BT components.With the Structural-BT framework,software engineers can develop robotic software by flexibly composing BT structures to formulate the skeleton software architecture and implement task-specific algorithms when necessary.In the experiment,this paper develops robotic software for diverse task scenarios and selects the baseline approaches of Robot Operating System(ROS)and classical BT development frameworks for comparison.By quantitatively measuring the reuse frequencies and ratios of BT structures,the Structural-BT framework has been shown to be more efficient than the baseline approaches for robotic software development.