Soil surface roughness change and its effect on runoff and erosion on the Loess Plateau of China

As an important parameter in the soil erosion model, soil surface roughness（SSR） is used to quantitatively describe the micro-relief on agricultural land. SSR has been extensively studied both experimentally and theoretically; however, no studies have focused on understanding SSR on the Loess Plateau of China. This study investigated changes in SSR for three different tillage practices on the Loess Plateau of China and the effects of SSR on runoff and erosion yield during simulated rainfall. The tillage practices used were zero tillage（ZT）, shallow hoeing（SH） and contour ploughing（CP）. Two rainfall intensities were applied, and three stages of water erosion processes（splash erosion（I）, sheet erosion（II） and rill erosion（III）） were analyzed for each rainfall intensity. The chain method was used to measure changes in SSR both initially and after each stage of rainfall. A splash board was used to measure the splash erosion at stage I. Runoff and sediment data were collected continuously at 2-min intervals during rainfall erosion stages II and III. We found that SSR of the tilled surfaces ranged from 1.0% to 21.9% under the three tillage practices, and the order of the initial SSR for the three treatments was ZT〈SH〈CP. For the ZT treatment, SSR increased slightly from stage I to III, whereas for the SH and CP treatments, SSR decreased by 44.5% and 61.5% after the three water erosion stages, respectively, and the greatest reduction in SSR occurred in stage I. Regression analysis showed that the changes in SSR with increasing cumulative rainfall could be described by a power function（R2〉0.49） for the ZT, SH and CP treatments. The runoff initiation time was longer in the SH and CP treatments than in the ZT treatment. There were no significant differences in the total runoff yields among the ZT, SH and CP treatments. Sediment loss was significantly smaller（P〈0.05） in the SH and CP treatments than in the ZT treatment.

Relationship between soil surface roughness and hydraulic roughness coefficient on sloping farmland

The soil surface roughness and hydraulic roughness coefficient are important hydraulic resistance characteristic parameters. Precisely estimating the hydraulic roughness coefficient is important to understanding mechanisms of overland flow. Four tillage practices, including cropland raking, artificial hoeing, artificial digging, and straight slopes, were considered based on the local agricultural conditions to simulate different values of soil surface roughness in the Loess Plateau. The objective of this study was to investigate the relationship between the soil surface roughness and hydraulic roughness coefficient on sloping farmland using artificial rainfall simulation. On a slope with a gradient of 10°, a significant logarithmic function was developed between the soil surface roughness and Manning＇s roughness coefficient, and an exponential function was derived to describe the relationship between the soil surface roughness and Reynolds number. On the slope with a gradient of 15°, a significant power function was developed to reflect the relationship between the soil surface roughness and Manning＇s roughness coefficient, and a linear function was derived to relate the soil surface roughness to the Reynolds number. These findings can provide alternative ways to estimate the hydraulic roughness coefficient for different types of soil surface roughness.

Predicting Surface Roughness and Moisture of Bare Soils Using Multi- band Spectral Reflectance Under Field Conditions

Soil surface roughness, denoted by the root mean square height(RMSH), and soil moisture(SM) are critical factors that affect the accuracy of quantitative remote sensing research due to their combined influence on spectral reflectance(SR). In regards to this issue, three SM levels and four RMSH levels were artificially designed in this study; a total of 12 plots was used, each plot had a size of 3 m × 3 m. Eight spectral observations were conducted from 14 to 30 October 2017 to investigate the correlation between RMSH, SM, and SR. On this basis, 6 commonly used bands of optical satellite sensors were selected in this study, which are red(675 nm), green(555 nm), blue(485 nm), near infrared(845 nm), shortwave infrared 1(1600 nm), and shortwave infrared 2(2200 nm). A negative correlation was found between SR and RMSH, and between SR and SM. The bands with higher coefficient of determination R^2 values were selected for stepwise multiple nonlinear regression analysis. Four characterized bands(i.e., blue, green, near infrared, and shortwave infrared 2) were chosen as the independent variables to estimate SM with R^2 and root mean square error(RMSE) values equal to 0.62 and 2.6%, respectively. Similarly, the four bands(green, red, near infrared, and shortwave infrared 1) were used to estimate RMSH with R^2 and RMSE values equal to 0.48 and 0.69 cm, respectively. These results indicate that the method used is not only suitable for estimating SM but can also be extended to the prediction of RMSH. Finally, the evaluation approach presented in this paper highly restores the real situation of the natural farmland surface on the one hand, and obtains high precision values of SM and RMSH on the other. The method can be further applied to the prediction of farmland SM and RMSH based on satellite and unmanned aerial vehicle(UAV) optical imagery.

Cropland physical disturbance intensity： plot-scale measurement and its application for soil erosion reduction in mountainous areas

Various kinds of human disturbances on cropland are the main reasons for soil erosion and land degradation.Farming practices in mountainous areas vary greatly among cropland plots because of the heterogeneity of biophysical conditions and differences in farmers'management behavior.The main purpose of this paper is to develop a composite index of cropland physical disturbance intensity(CLDI)to reflect the plot-scale discrepancy of potential soil erosion in mountainous areas.The study was based on both plot survey and household interview data,collected from six typical catchments in mountainous areas of southwestern China.Four kinds of physical disturbance practices and two kinds of conservation practices during one crop rotation period were synthesized to develop the CLDI index.The rough set theory was referenced to avoid subjectivity during weight allocation.The results show that conventional tillage,deep fertilization,and manual weeding are the main causes of cropland soil erosion,whereas manure application in combination with seasonal fallow reduces soil erosion.Different crop types as well as cropland location factors determine the spatial pattern of CLDI.Crop rotation modes with major crops of tobacco and maize resulted in a maximal CLDI,and cropland plots with a distance radius of 150 meters away from households received the most intensive physical disturbance.These results are critical to help better protect rural environments in mountainous areas.Based on the results,methods to reduce cropland soil erosion are suggested.

Investigation on electromagnetic scattering from rough soil surface of layered medium using the small perturbation method

Electromagnetic scattering from a rough surface of layered medium is investigated, and the formulae of the scattering coefficients for different polarizations are derived using the small perturbation method. A rough surface with exponential correlation function is presented for describing a rough soil surface of layered medium, the formula of its scattering coefficient is derived by considering the spectrum of the rough surface with exponential correlation function; the curves of the bistatic scattering coefficient of HH polarization with variation of the scattering angle are obtained by numerical calculation. The influence of the permittivity of layered medium, the mean layer thickness of intermediate medium, the roughness surface parameters and the frequency of the incident wave on the blstatic scattering coefficient is discussed. Numerical results show that the influence of the permittivity of layered medium, the mean layer thickness of intermediate medium, the rms and the correlation length of the rough surface, and the frequency of the incident wave on the bistatic scattering coefficient is very complex.

Effect of soil surface roughness on emergence rate and yield of mechanized direct-seeded rapeseed based on 3D laser scanning

The quality of seedbed after sowing such as soil surface roughness is one of the key factors affecting the seedling emergence of rapeseed,which ultimately affected crop yield.However,the effect of soil surface roughness on seedling emergence and yield of rapeseed is still unclear.In this study,field experiments at the experimental site of Jianli and Shayang were carried out.Three treatments were designed:relative slow(M1),medium(M2),and fast(M3)forward speed of the unit.Soil surface roughness measured by a 3D laser scanner,seed quantity of the seeder,emergence rate and yield of rapeseed were determined to investigate the soil surface roughness effect on emergence rate and yield of rapeseed.The results showed that as the forward speed of the unit increased,the compartment surface became rougher.Compared with the M1 and M2 treatments,soil surface roughness under the M3 treatment increased by 36.5%and 9.8%,respectively.The actual seed quantity of the seeder under different treatments ranged from 3806.56 to 4158.18 g/hm2.The average error rate of the actual and theoretical seed quantity was less than 5%,which met the operational quality requirements for seeding rapeseed crops.As the forward speed of the unit increased,the actual seed quantity of the seeder gradually increased while the emergence rate and yield of rapeseed decreased.The seed quantity under the M3 treatment increased by 6.9%and 4.7%,while the emergence rate of rapeseed decreased by 3.3%and 2.0%,and the yield decreased by 23.2%and 13.1%,compared with the M1 and M2 treatments,respectively.Correlation analysis indicated that emergence rate and yield of rapeseed were negatively influenced by soil surface roughness.Considering rapeseed emergence rate,seed yield,and economic benefits,the M1 treatment was recommended.But considering the factor that the M1 treatment may reduce the unit operation efficiency,and thus resulting in lower cost of production,M2 could be recommended in actual farming.The results of this study laid a theoretical foundation for analyzing the relationship between the seedbed surface quality and seedling emergence and yield.

An experimental study on the influences of wind erosion on water erosion

In semi-arid regions, complex erosion resulted from a combination of wind and water actions has led to a massive soil loss and a comprehensive understanding of its mechanism is the first step toward prevention of the erosion. However, the mutual influences between wind erosion and water erosion have not been fully understood. This research used a wind tunnel and two rainfall simulators and simulated two rounds of alternations between wind erosion and water erosion（i.e., 1^（st） wind erosion–1^（st） water erosion and 2^（nd） wind erosion–2^（nd） water erosion） on three slopes（5°, 10°, and 15°） with six wind speeds（0, 9, 11, 13, 15, and 20 m/s） and five rainfall intensities（0, 30, 45, 60, and 75 mm/h）. The objective was to analyze the influences of wind erosion on succeeding water erosion. Results showed that the effects of wind erosion on water erosion were not the same in the two rounds of tests. In the 1^（st） round of tests, wind erosion first restrained and then intensified water erosion mostly because the blocking effect of wind-sculpted micro-topography on surface flow was weakened with the increase in slope. In the 2^（nd） round of tests, wind erosion intensified water erosion on beds with no rills at gentle slopes and low rainfall intensities or with large-size rills at steep slopes and high rainfall intensities. Wind erosion restrained water erosion on beds with small rills at moderate slopes and moderate rainfall intensities. The effects were mainly related to the fine grain layer, rills and slope of the original bed in the 2^（nd） round of tests. The findings can deepen our understanding of complex erosion resulted from a combination of wind and water actions and provide scientific references to regional soil and water conservation.