The effect of drying techniques on the microstructure,morphology and pore structure of porous silica gels was studied in the paper.The gels were prepared by using sol-gel process and different drying routes:freeze-dry...The effect of drying techniques on the microstructure,morphology and pore structure of porous silica gels was studied in the paper.The gels were prepared by using sol-gel process and different drying routes:freeze-drying (FD),low pressure drying (LPD),high temperature drying (HTD) and chemical modification & ambient drying (CMD) techniques.Observation under pore distribution and structural properties showed that CMD technique leads to homogenous mesoporous silica material with specific surface area of 745 m2/g,and the average pore size around 20 nm,while LPD and HTD result in loosely packed particles with non-isotropic aggregation pattern.The specific surface areas of LPD and HTD samples are 419 and 513 m2/g respectively,and the pore size distribution of the samples are observed distributing widely in range of 10-100 nm.Freeze drying method is a new but prospective way to prepare mesoporous silica.The specific area of FD sample is around 500 m2/g.By the comparison for the properties of the gels,this paper wants to induce a further interest in finding a proper method to synthesize the porous silica gels for low price use.展开更多
Sol-gel method is a technique to synthesize inorganic materials based on wet-chemical reaction theory. The results have shown that reactants tetraethyl orthosilicate （TEOS） and Ca（NO3）2·4H2O can form sol and ...Sol-gel method is a technique to synthesize inorganic materials based on wet-chemical reaction theory. The results have shown that reactants tetraethyl orthosilicate （TEOS） and Ca（NO3）2·4H2O can form sol and gel in solution at 50-60 ℃, and the cosolvents are propyl alcohol （NPA） and H2O, the catalyst is HNO3. This sol-gel is burned for 12 hat 1 350-1 450 ℃ so that the organic matter, free water （moisture） in sol-gel system are removed and a solid reaction has taken place to form the resulting product. The product has been confirmed to be C3S by XRD, SEM and 29Si MAS NMR, as well as free lime content of the product which is less than 0.2% was determined by propanetriol-ethanol-method. The analysis determined by EDXA has indicated that the n（Ca）/n（Si） ratio in corresponding to micro-region is close to theoretical value of 3∶1. This resulting product is C3S with Si sites of Q0 polymerization, and has higher purity and hydraulic activities at earlier age of hydration.展开更多
Indium-tin-oxide(ITO)films were prepared on the quarts glass by sol-gel technique.Effects of different heat treatment temperatures and cooling methods on the morphological,optical and electrical properties of ITO film...Indium-tin-oxide(ITO)films were prepared on the quarts glass by sol-gel technique.Effects of different heat treatment temperatures and cooling methods on the morphological,optical and electrical properties of ITO films were measured by TG/DTA, IR,XRD,SEM,UV-VIS spectrometer and four-probe apparatus.It is found that the crystallized ITO films exhibit a polycrystalline cubic bixbyite structure.The heat treatment process has significant effects on the morphological,optical and electrical properties of ITO films.Elevating the heat treatment temperature can perfect the crystallization process of ITO films,therefore the optical and electrical properties of ITO films are improved.But the further increasing of heat treatment temperature results in the increment of ITO films’resistivity.Compared with ITO films elaborated by furnace cooling,those prepared through air cooling have following characteristics as obviously decreased crystalline size,deeply declined porosity,more compact micro-morphology,improved electrical property and slightly decreased optical transmission.展开更多
Compositional graded BaxSr1-xTiO3 (x=0.6, 0.7, 0.8, 0.9, 1.0) (BST) thin films (less than 400 nm) were fabricated on Si and Pt/Ti/SiO2/Si substrates by sol-gel technique. A special heating treatment was employed to fo...Compositional graded BaxSr1-xTiO3 (x=0.6, 0.7, 0.8, 0.9, 1.0) (BST) thin films (less than 400 nm) were fabricated on Si and Pt/Ti/SiO2/Si substrates by sol-gel technique. A special heating treatment was employed to form the uniform composition gradients at 700 ℃. The microstructures of the films were studied by means of X-ray diffraction, atomic force microscope and field emission scanning electron microscopy. The results show that the films have uniform and crack-free surface morphology with perovskite structure phase. The small signal dielectric constant (εr) and dielectric loss (tan δ) are found to be 335 and 0.045 at room temperature and 200 kHz. The dielectric properties change significantly with applied dc bias, and the graded thin film show high tunability of 42.3% at an applied field of 250 kV/cm. All the results indicate that the graded BST thin films prepared by sol-gel technique have a promising candidate for microelectronic device.展开更多
A novel chedrically-modified electrode containing 1:12 phosphomolybdic anions wasachieved on the surface of platinum electrode by the sol-gel technique. The electrode exhibits ahigh catalytic activity towards the elec...A novel chedrically-modified electrode containing 1:12 phosphomolybdic anions wasachieved on the surface of platinum electrode by the sol-gel technique. The electrode exhibits ahigh catalytic activity towards the electroreduction of BrO3- anions.展开更多
基金Sponsored by the National Mega-Project of Scientific & Technical Supporting Programs,Ministry of Science &Technology of China (Grant No.2006BAJ04A04)the Science Foundation of Liaoning Province,China (Grant No. 2008S190)
文摘The effect of drying techniques on the microstructure,morphology and pore structure of porous silica gels was studied in the paper.The gels were prepared by using sol-gel process and different drying routes:freeze-drying (FD),low pressure drying (LPD),high temperature drying (HTD) and chemical modification & ambient drying (CMD) techniques.Observation under pore distribution and structural properties showed that CMD technique leads to homogenous mesoporous silica material with specific surface area of 745 m2/g,and the average pore size around 20 nm,while LPD and HTD result in loosely packed particles with non-isotropic aggregation pattern.The specific surface areas of LPD and HTD samples are 419 and 513 m2/g respectively,and the pore size distribution of the samples are observed distributing widely in range of 10-100 nm.Freeze drying method is a new but prospective way to prepare mesoporous silica.The specific area of FD sample is around 500 m2/g.By the comparison for the properties of the gels,this paper wants to induce a further interest in finding a proper method to synthesize the porous silica gels for low price use.
基金Financially supported by National Basic Research Program of China (973Program)(No. 2009CB623200)National Natural Science Foundation of China(No.50972109)Doctoral Program of Higher Education (No. 20090141110021)
文摘Sol-gel method is a technique to synthesize inorganic materials based on wet-chemical reaction theory. The results have shown that reactants tetraethyl orthosilicate （TEOS） and Ca（NO3）2·4H2O can form sol and gel in solution at 50-60 ℃, and the cosolvents are propyl alcohol （NPA） and H2O, the catalyst is HNO3. This sol-gel is burned for 12 hat 1 350-1 450 ℃ so that the organic matter, free water （moisture） in sol-gel system are removed and a solid reaction has taken place to form the resulting product. The product has been confirmed to be C3S by XRD, SEM and 29Si MAS NMR, as well as free lime content of the product which is less than 0.2% was determined by propanetriol-ethanol-method. The analysis determined by EDXA has indicated that the n（Ca）/n（Si） ratio in corresponding to micro-region is close to theoretical value of 3∶1. This resulting product is C3S with Si sites of Q0 polymerization, and has higher purity and hydraulic activities at earlier age of hydration.
基金Project(50271084)supported by the National Natural Science Foundation of China
文摘Indium-tin-oxide(ITO)films were prepared on the quarts glass by sol-gel technique.Effects of different heat treatment temperatures and cooling methods on the morphological,optical and electrical properties of ITO films were measured by TG/DTA, IR,XRD,SEM,UV-VIS spectrometer and four-probe apparatus.It is found that the crystallized ITO films exhibit a polycrystalline cubic bixbyite structure.The heat treatment process has significant effects on the morphological,optical and electrical properties of ITO films.Elevating the heat treatment temperature can perfect the crystallization process of ITO films,therefore the optical and electrical properties of ITO films are improved.But the further increasing of heat treatment temperature results in the increment of ITO films’resistivity.Compared with ITO films elaborated by furnace cooling,those prepared through air cooling have following characteristics as obviously decreased crystalline size,deeply declined porosity,more compact micro-morphology,improved electrical property and slightly decreased optical transmission.
基金Project(50372017/E0204) supported by the National Natural Science Foundation of China Project (2004ABA094) supported by the Natural Science Foundation of Hubei Province Project supported by the Innovation Team Foundation of Education Bureau of Hubei Province, China
文摘Compositional graded BaxSr1-xTiO3 (x=0.6, 0.7, 0.8, 0.9, 1.0) (BST) thin films (less than 400 nm) were fabricated on Si and Pt/Ti/SiO2/Si substrates by sol-gel technique. A special heating treatment was employed to form the uniform composition gradients at 700 ℃. The microstructures of the films were studied by means of X-ray diffraction, atomic force microscope and field emission scanning electron microscopy. The results show that the films have uniform and crack-free surface morphology with perovskite structure phase. The small signal dielectric constant (εr) and dielectric loss (tan δ) are found to be 335 and 0.045 at room temperature and 200 kHz. The dielectric properties change significantly with applied dc bias, and the graded thin film show high tunability of 42.3% at an applied field of 250 kV/cm. All the results indicate that the graded BST thin films prepared by sol-gel technique have a promising candidate for microelectronic device.
文摘A novel chedrically-modified electrode containing 1:12 phosphomolybdic anions wasachieved on the surface of platinum electrode by the sol-gel technique. The electrode exhibits ahigh catalytic activity towards the electroreduction of BrO3- anions.
