The development of tellurium(Te)-based semiconductor nanomaterials for efficient light-to-heat conversion may offer an effective means of harvesting sunlight to address global energy concerns.However,the nanosized Te(...The development of tellurium(Te)-based semiconductor nanomaterials for efficient light-to-heat conversion may offer an effective means of harvesting sunlight to address global energy concerns.However,the nanosized Te(nano-Te)materials reported to date suffer from a series of drawbacks,including limited light absorption and a lack of surface structures.Herein,we report the preparation of nano-Te by electrochemical exfoliation using an electrolyzable room-temperature ionic liquid.Anions,cations,and their corresponding electrolytic products acting as chemical scissors can precisely intercalate and functionalize bulk Te.The resulting nano-Te has high morphological entropy,rich surface functional groups,and broad light absorption.We also constructed foam hydrogels based on poly(vinyl alcohol)/nano-Te,which achieved an evaporation rate and energy efficiency of 4.11 kg m^(−2)h^(−1)and 128%,respectively,under 1 sun irradiation.Furthermore,the evaporation rate was maintained in the range 2.5-3.0 kg m^(−2)h^(−1)outdoors under 0.5-1.0 sun,providing highly efficient evaporation under low light conditions.展开更多
Solar steam generation(SSG)is a potential technology for freshwater production,which is expected to address the global water shortage problem.Some noble metals with good photothermal conversion performance have receiv...Solar steam generation(SSG)is a potential technology for freshwater production,which is expected to address the global water shortage problem.Some noble metals with good photothermal conversion performance have received wide concerns in SSG,while high cost limits their practical applications for water purification.Herein,a self-supporting nanoporous copper(NP-Cu)film was fabricated by one-step dealloying of a specially designed Al_(98)Cu_(2)precursor with a dilute solid solution structure.In-situ and ex-situ characterizations were performed to reveal the phase and microstructure evolutions during dealloying.The NP-Cu film shows a unique three-dimensional bicontinuous ligament-channel structure with high porosity(94.8%),multi scale-channels and nanoscale ligaments(24.2±4.4nm),leading to its strong broadband absorption over the 200–2500 nm wavelength More importantly,the NP-Cu film exhibits excellent SSG performance with high evaporation rate,superior efficiency and good stability.The strong desalination ability of NP-Cu also manifests its potential applications in seawater desalination.The related mechanism has been rationalized based upon the nanoporous network,localized surface plasmon resonance effect and hydrophilicity.展开更多
SiC composite ceramics for solar absorber and storage integration are new concentrating solar power materials.SiC composite ceramics for solar absorber and storage integration were fabricated using SiC,black corundum ...SiC composite ceramics for solar absorber and storage integration are new concentrating solar power materials.SiC composite ceramics for solar absorber and storage integration were fabricated using SiC,black corundum and kaolin as the raw materials,Co_(2)O_(3)as the additive via pressureless graphite-buried sintering method in this study.Influences of Co_(2)O_(3)on the microstructure and properties of SiC composite ceramics for solar absorber and storage integration were studied.The results indicate that sample D2(5wt%Co_(2)O_(3))sintered at 1480℃exhibits optimal performances for 119.91 MPa bending strength,93%solar absorption,981.5 kJ/kg(25-800℃)thermal storage density.The weight gain ratio is 12.58 mg/cm2after 100 h oxidation at 1000℃.The Co_(2)O_(3)can decrease the liquid phase formation temperature and reduce the viscosity of liquid phase during sintering.The liquid with low viscosity not only promotes the elimination of pores to achieve densification,but also increases bending strength,solar absorption,thermal storage density and oxidation resistance.A dense SiO_(2) layer was formed on the surface of SiC after 100 h oxidation at 1000℃,which protects the sample from further oxidation.However,excessive Co_(2)O_(3)will make the microstructure loose,which is disadvantageous to the performances of samples.展开更多
This paper demonstrates an intrinsic modulation of the cutoff wavelength in the spectra for solar selective absorbing coating based on high-entropy films.The(NiCuCrFeSi)N((NCCFS)N)films were deposited by a magnetron s...This paper demonstrates an intrinsic modulation of the cutoff wavelength in the spectra for solar selective absorbing coating based on high-entropy films.The(NiCuCrFeSi)N((NCCFS)N)films were deposited by a magnetron sputtering system.Rutherford backscattering spectroscopy analysis confirms the uniform composition and good homogeneity of these high-entropy films.The real and imaginary parts of the permittivity for the(NCCFS)N material are calculated on the basis of the reflectance spectral fitting results.A redshift cutoff wavelength of the reflectance spectrum with increasing nitrogen gas flow rate exists because of the different levels of dispersion when changing nitrogen content.To realize significant solar absorption,the film surface was reconstituted to match its impedance with air by designing a pyramid nanostructure metasurface.Compared with the absorptance of the as-deposited films,the designed metasurface obtains a significant improvement in solar absorption with the absorptance increasing from 0.74 to 0.99.The metasurfaces also show low mid-infrared emissions with thermal emittance that can be as low as 0.06.These results demonstrate a new idea in the design of solar selective absorbing surface with controllable absorptance and low infrared emission for high-efficiency photo-thermal conversion.展开更多
Al_(2)O_(3)/SiC composite ceramics were prepared fromα-Al_(2)O_(3) and SiC by a pressureless sinter method in this study.The effect of SiC contents on the mechanic properties,phase compositions and microstructure is ...Al_(2)O_(3)/SiC composite ceramics were prepared fromα-Al_(2)O_(3) and SiC by a pressureless sinter method in this study.The effect of SiC contents on the mechanic properties,phase compositions and microstructure is studied.Experimental results show that the vickers hardness,wear resistance and thermal conductivity of the samples increase with the increase in the SiC content,and the hardness of the sample reaches 16.22 GPa,and thermal conductivity of the sample reaches 25.41 W/(m.K)at room temperature when the SiC content is 20 wt%(B5)and the sintering temperature is at 1640℃.Higher hardness means higher scour resistance,and it indicates that the B5 material is expected to be used for the solar heat absorber of third generation solar thermal generation.The results indicate the mechanism of improving mechanical properties of Al_(2)O_(3)/SiC composite ceramics:SiC plays a role in grain refinement that the grain of SiC inhibits the grain growth of Al_(2)O_(3),while the addition of SiC changes the fracture mode from the intergranular to the intergranular-transgranular.展开更多
The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor ...The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor of 1.07 enhancement for an electrical field in a metal microcavity. The enhancement is considered to be the fact that strong exciton-photon coupling occurs in the microcavity due to ultrathin Ag. On the basis of the optical enhancement effect, optical behaviors are manipulated by varying the microcavity length. It is confirmed that ultrathin silver can serve as an ideal interconnection layer as the active layer is ~ 150nm thick and the thickness ratio between front and rear active layers lies between 1:1 and 1:2.展开更多
Nanofluids based direct absorption solar collectors(DASCs) are considered as the important alternative for further improve the utilization of solar energy. However the low-quality energy and aggregation of nanoparticl...Nanofluids based direct absorption solar collectors(DASCs) are considered as the important alternative for further improve the utilization of solar energy. However the low-quality energy and aggregation of nanoparticles obstructs their large-scale application. In this work, a new method of using magnetic nanofluids in DASCs is proposed. By this method, not only high-quality energy is got as well as the problems of blockage and corrosion in heat exchanger are well avoided. The result shows that the maximum temperature can reach 98℃ under 3 solar irradiations and the photothermal conversion efficiency can be further increased by 12.8% when the concentration is 500 ppm after adding an external rotating magnetic field. The highest viscosity of working fluid reduced by 21% when the concentration is 500 ppm at 95℃ after separating the Fe_(3)O_(4)@C nanoparticles from the nanofluids via magnetic separation technology. Meanwhile, the obtained pure base liquids with high temperature flow to heat exchanger, which also reduces the flow resistance in pipeline and avoids the problems such as blockage and corrosion in heat exchanger. This research promotes a new way for the efficient utilization of solar energy.展开更多
The actual treatise represents a synopsis of six important previous contributions of the author, concerning atmospheric physics and climate change. Since this issue is influenced by politics like no other, and since t...The actual treatise represents a synopsis of six important previous contributions of the author, concerning atmospheric physics and climate change. Since this issue is influenced by politics like no other, and since the greenhouse-doctrine with CO<sub>2</sub> as the culprit in climate change is predominant, the respective theory has to be outlined, revealing its flaws and inconsistencies. But beyond that, the author’s own contributions are focused and deeply discussed. The most eminent one concerns the discovery of the absorption of thermal radiation by gases, leading to warming-up, and implying a thermal radiation of gases which depends on their pressure. This delivers the final evidence that trace gases such as CO<sub>2</sub> don’t have any influence on the behaviour of the atmosphere, and thus on climate. But the most useful contribution concerns the method which enables to determine the solar absorption coefficient β<sub>s</sub> of coloured opaque plates. It delivers the foundations for modifying materials with respect to their capability of climate mitigation. Thereby, the main influence is due to the colouring, in particular of roofs which should be painted, preferably light-brown (not white, from aesthetic reasons). It must be clear that such a drive for brightening-up the World would be the only chance of mitigating the climate, whereas the greenhouse doctrine, related to CO<sub>2</sub>, has to be abandoned. However, a global climate model with forecasts cannot be aspired to since this problem is too complex, and since several climate zones exist.展开更多
Fourier transform spectrometry has played an important role in the three-dimensional greenhouse gas monitoring as the focus of attention on global warming in the past few years. In this paper, a ground-based low-resol...Fourier transform spectrometry has played an important role in the three-dimensional greenhouse gas monitoring as the focus of attention on global warming in the past few years. In this paper, a ground-based low-resolution remote sensing system measuring the total columns of CO2 and CH4 is developed, which tracks the sun automatically and records the spectra in real-time and has the advantages of portability and low cost. A spectral inversion algorithm based on nonlinear least squares spectral fitting procedure for determining the column concentrations of these species is described. Atmospheric transmittance spectra are computed line-by-line in the forward model and observed on-line by direct solar radiation. Also, the wavelength shifts are introduced and the influence of spectral resolution is discussed. Based on this system and algorithm, the vertical columns of O2, CO2, and CH4 are calculated from total atmospheric observation transmittance spectra in Hefei, and the results show that the column averaged dry-air mole fractions of CO2 and CH4 are measured with accuracies of 3.7% and 5%, respectively. Finally, the H2O columns are compared with the results observed by solar radiometer at the same site and the calculated correlation coefficient is 0.92, which proves that this system is suitable for field campaigns and used to monitor the local greenhouse gas sources under the condition of higher accuracy, indirectly.展开更多
Calcium carbonate is promising thermochemical heat storage material for next-generation solar power systems due to its high energy storage density,low cost,and high operation temperature.Researchers have tried to impr...Calcium carbonate is promising thermochemical heat storage material for next-generation solar power systems due to its high energy storage density,low cost,and high operation temperature.Researchers have tried to improve energy storage performances of calcium carbonate recently,but most researches focus on powders,which are not suitable for scalable applications.Here,novel granular porous calcium carbonate particles with very high solar absorptance,energy storage density,abrasive resistances,and energy storage rate are proposed for direct solar thermochemical heat storage.The average solar absorptance is improved by 234%compared with ordinary particles.Both cycle stability and abrasive resistances are excellent with almost no decay of energy storage density over 25 cycles nor apparent particle weight loss over 24 h of continuous operation insides a planetary ball mill.In addition,the decomposition temperature is reduced by 2.8%–5.6%while the reaction rate of heat storage is enhanced by 80%–205%depending on the CO_(2) partial pressure.The decomposition process of doped granular porous CaCO_(3) particles is found to involve three overlapping processes.This work provides new routes to achieve scalable direct solar thermochemical heat storage for next-generation high-temperature solar power systems.展开更多
Controlling the distribution of solar spectrum in different bands would boost the energy harvesting efficiency and optimize the energy dispatchability.1D photonic crystal with intrinsic optical band gap can be used to...Controlling the distribution of solar spectrum in different bands would boost the energy harvesting efficiency and optimize the energy dispatchability.1D photonic crystal with intrinsic optical band gap can be used to split the solar spectrum for hybrid photovoltaic/thermal solar applications.Here,we designed an efficient solar spectrum optical filter based on a cermet layer,Si/SiO_(2)1D photonic crystal,and top heterostructure layer.Compared with 1D photonic crystal structure,the 1D photonic crystal heterostructure with top YSZ layer can realize the reflectance of greater than 92%in PV band and the low average reflectance in two thermal bands by tuning the effective impedance of multilayer films.The enhanced reflectance in PV band results from the huge mismatching of impedance between free space and the heterostructure structure.The top dielectric layer can also be extended to other oxides.展开更多
This research paper aims to perform dynamics analysis,3E assessment including energy,exergy,exergoeconomic,and the multiobjective evolutionary optimization on a novel solar Li-Br absorption refrigeration cycle.The res...This research paper aims to perform dynamics analysis,3E assessment including energy,exergy,exergoeconomic,and the multiobjective evolutionary optimization on a novel solar Li-Br absorption refrigeration cycle.The research is time-dependent,owing to solar radiation variability during different timelines.Theoretically,all the necessary thermodynamic,energy,and exergy equations are applied initially.This is followed by the thermoeconomic analysis,which takes place after defining the designing variables during the thermoeconomic optimization process and is presented together with the economic relations of the system and its thermoeconomic characteristics.Furthermore,the sensitivity analysis is undertaken,the source of system inefficiency is determined,the multi-objective evolutionary optimization of the whole system is carried out,and the optimal values are compared with the primary stage.Engineering Equation Solver(EES)software has been used to accomplish comprehensive analyses.As part of the validation process,the results of the research are compared with those published previously and are found to be relatively consistent.展开更多
If the heat of road surface can be stored in summer, the road surface temperature will be decreased to prevent permanent deformation of pavement. Besides, if the heat stored is released, it can supply heat for buildin...If the heat of road surface can be stored in summer, the road surface temperature will be decreased to prevent permanent deformation of pavement. Besides, if the heat stored is released, it can supply heat for buildings or raise the road surface temperature for snow melting in winter. A road-solar energy system was built in this study, and the heat transfer mechanism and effect of the system were analyzed according to the monitored solar radiant heat, the solar energy absorbed by road and the heat stored by soil. The results showed that the road surface temperature was mainly affected by solar radiation, but the effect is hysteretic in nature. The temperature of the solar road surface was 3~C-6~C lower than that of the ordinary road surface. The temperature of the solar road along the vertical direction was 2~C-5~C lower than that of the ordinary road. The temperature difference increased as the distance to the heat transfer tubes decreased. The average solar collector efficiency of the system was 14.4%, and the average solar absorptivity of road surface was 36%.展开更多
Recently, a solar thermal collector often employs nanoparticle suspension to absorb the solar radiation directly by a working fluid as well as to enhance its thermal performance. The collector efficiency of a direct a...Recently, a solar thermal collector often employs nanoparticle suspension to absorb the solar radiation directly by a working fluid as well as to enhance its thermal performance. The collector efficiency of a direct absorption solar collector (DASC) is very sensitive to optical properties of the working fluid, such as absorption and scattering coefficients. Most of the existing studies have neglected particle scattering by assuming that the size of nanoparticle suspension is much smaller than the wavelength of solar radiation (i.e., Rayleigh scattering is applicable). If the nanoparticle suspension is made of metal, however, the scattering cross-section of metallic nanoparticles could be comparable to their absorption cross-section depending on the particle size, especially when the localized surface plasmon (LSP) is excited. Therefore, for the DASC utilizing a plasmonic nanofluid supporting the LSP, light scattering from metallic particle suspension must be taken into account in the thermal analysis. The present study investigates the scattering effect on the thermal performance of the DASC employing plasmonic nanofluid as a working fluid. In the analysis, the Monte Carlo method is employed to numerically solve the radiative transfer equation considering the volume scatter- ing inside the nanofluid. It is found that the light scattering can improve the collector performance if the scattering coefficient of nanofluid is carefully engineered depending on its value of the absorption coefficient.展开更多
Access to safe drinking water has become an extremely urgent research topic wo rldwide.In recent years,the technology of solar vapor generation has been extensively explored as a potential and effective strategy of tr...Access to safe drinking water has become an extremely urgent research topic wo rldwide.In recent years,the technology of solar vapor generation has been extensively explored as a potential and effective strategy of transforming elements content in seawater.In this review,the basic concepts and theories of metal-based photothermal vapor generation device(PVGD) with excellent optical and thermal regulatory are introduced.In the view of optical regulation,how to achieve high-efficiency localized evaporation in different evaporation system(i.e.,volumetric solar heating and interface solar heating) is discussed;from the aspect of thermal regulation,the importance of selective absorption surface for interfacial PVGD is analyzed.Based on the above discussion and analysis,we summarize the challenges of metal-based desalination device.展开更多
The two-stream approximation is applied to solve the multiple scattered radiation transfer equations for an inhomogeneous aerosol atmosphere.The accurate absorption of water vapor,ozone,carbon dioxide and molecular ox...The two-stream approximation is applied to solve the multiple scattered radiation transfer equations for an inhomogeneous aerosol atmosphere.The accurate absorption of water vapor,ozone,carbon dioxide and molecular oxygen is calculated.Calculations have been carried out band by band for the beating rate of atmosphere.The results show that the effect of aerosols on solar heating of the atmosphere is significant.展开更多
Optical absorption in thin-film solar cells can be improved by using surface plasmons for guiding and confining the light on the nanoscale.We report theoretical and simulation studies of a-Si thin-film solar cells wit...Optical absorption in thin-film solar cells can be improved by using surface plasmons for guiding and confining the light on the nanoscale.We report theoretical and simulation studies of a-Si thin-film solar cells with silver nanocylinders on the surface.We found that surface plasmons increased the cells' spectral response over almost the entire studied solar spectrum.In the ultraviolet range and at wavelengths close to the Si band gap we observed a significant enhancement of the absorption for both thin-film and wafer-based structures.We also performed optimization studies of particle size,inter-particle distance,and dielectric environment,for obtaining maximal absorption within the substrate.A blue-shift of the resonance wavelength with increasing inter-particle distance was observed in the visible range.Cell performance improved at optimal spacing,which strongly depended on the nanoparticle size.Increasing the nanocylinder size was accompanied by the widening of the plasmon resonance band and a red-shift of the plasmon resonance peaks.A weak red-shift and plasmon peak enhancement were observed in the reflectance curve with increasing refractive index of the dielectric spacer.展开更多
A new process of flat absorber black nickel alloy coating tion from a bath containing nickel, zinc and ammonium was developed on stainless steel by electrodeposi- sulphates; thiocyanate and sodium hypophosphite for sp...A new process of flat absorber black nickel alloy coating tion from a bath containing nickel, zinc and ammonium was developed on stainless steel by electrodeposi- sulphates; thiocyanate and sodium hypophosphite for space applications. Coating process was optimized by investigating the effects of plating parameters, viz concentration of bath constituents, current density, temperature, pH and plating time on the optical properties of the black deposits. Energy dispersive X-ray spectroscopy showed the inclusion of about 6% phosphorous in the coating. The scanning electron microscopy studies revealed the amorphous nature of the coating. The corrosion resistance of the coatings was evaluated by the electrochemical impedance spectroscopy (EIS) and linear polarization (LP) techniques. The results revealed that, phosphorous addition confers better corro- sion resistance in comparison to conventional black nickel coatings. The black nickel coating obtained from hypophosphite bath provides high solar absorptance (αs) and infrared emittance (εIR) of the order of 0.93. Environmental stability to space applications was established by the humidity and thermal cycling tests.展开更多
Perfect absorbers(PAs)are devices that can efficiently absorb electromagnetic waves.Great attention has been attracted since metamaterial PAs(MPAs)were first proposed in 2008.In recent years,with the development of na...Perfect absorbers(PAs)are devices that can efficiently absorb electromagnetic waves.Great attention has been attracted since metamaterial PAs(MPAs)were first proposed in 2008.In recent years,with the development of nanophotonics and the improvement of nanomanufacturing technology,considerable progresses have been achieved in designing MPAs using new materials and new structures.In this review,we summarized first the latest developments of PAs from five directions:dualband,multi-band,wideband,narrow-band,and tunable light absorption.The shortcomings of the previous PAs and the latest improvements were introduced as well.Then,the application of perfect absorption in solar cells,sensors,switches,and structural colors was discussed.Finally,we presented the main challenges and prospects in these fields.Novel PAs for applications in a wide field of opto-electronic devices will continuously progress with breakthrough advances in absorbers related technology and science.展开更多
基金the Science and Technology Innovation Council of Shenzhen(Grant Nos.JCYJ20200109105212568,KQTD20170810105439418,JCYJ20200109114237902,20200812203318002,and 20200810103814002)the National Natural Science Foundation of China(Grant No.12274197)the Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2023A1515030240,2019A1515010790,2021A0505110015).
文摘The development of tellurium(Te)-based semiconductor nanomaterials for efficient light-to-heat conversion may offer an effective means of harvesting sunlight to address global energy concerns.However,the nanosized Te(nano-Te)materials reported to date suffer from a series of drawbacks,including limited light absorption and a lack of surface structures.Herein,we report the preparation of nano-Te by electrochemical exfoliation using an electrolyzable room-temperature ionic liquid.Anions,cations,and their corresponding electrolytic products acting as chemical scissors can precisely intercalate and functionalize bulk Te.The resulting nano-Te has high morphological entropy,rich surface functional groups,and broad light absorption.We also constructed foam hydrogels based on poly(vinyl alcohol)/nano-Te,which achieved an evaporation rate and energy efficiency of 4.11 kg m^(−2)h^(−1)and 128%,respectively,under 1 sun irradiation.Furthermore,the evaporation rate was maintained in the range 2.5-3.0 kg m^(−2)h^(−1)outdoors under 0.5-1.0 sun,providing highly efficient evaporation under low light conditions.
基金financial support by the Key Research and Development Program of Shandong Province(2021ZLGX01)the support of Taishan Scholar Foundation of Shandong Province+1 种基金the Natural Science Foundation of Shandong Province(ZR2021QE229,ZR2022QB169)the Postdoctoral Science foundation of China(2022M710077)。
文摘Solar steam generation(SSG)is a potential technology for freshwater production,which is expected to address the global water shortage problem.Some noble metals with good photothermal conversion performance have received wide concerns in SSG,while high cost limits their practical applications for water purification.Herein,a self-supporting nanoporous copper(NP-Cu)film was fabricated by one-step dealloying of a specially designed Al_(98)Cu_(2)precursor with a dilute solid solution structure.In-situ and ex-situ characterizations were performed to reveal the phase and microstructure evolutions during dealloying.The NP-Cu film shows a unique three-dimensional bicontinuous ligament-channel structure with high porosity(94.8%),multi scale-channels and nanoscale ligaments(24.2±4.4nm),leading to its strong broadband absorption over the 200–2500 nm wavelength More importantly,the NP-Cu film exhibits excellent SSG performance with high evaporation rate,superior efficiency and good stability.The strong desalination ability of NP-Cu also manifests its potential applications in seawater desalination.The related mechanism has been rationalized based upon the nanoporous network,localized surface plasmon resonance effect and hydrophilicity.
基金Funded by the National Key R&D Program of China(No.2018YFB1501002)。
文摘SiC composite ceramics for solar absorber and storage integration are new concentrating solar power materials.SiC composite ceramics for solar absorber and storage integration were fabricated using SiC,black corundum and kaolin as the raw materials,Co_(2)O_(3)as the additive via pressureless graphite-buried sintering method in this study.Influences of Co_(2)O_(3)on the microstructure and properties of SiC composite ceramics for solar absorber and storage integration were studied.The results indicate that sample D2(5wt%Co_(2)O_(3))sintered at 1480℃exhibits optimal performances for 119.91 MPa bending strength,93%solar absorption,981.5 kJ/kg(25-800℃)thermal storage density.The weight gain ratio is 12.58 mg/cm2after 100 h oxidation at 1000℃.The Co_(2)O_(3)can decrease the liquid phase formation temperature and reduce the viscosity of liquid phase during sintering.The liquid with low viscosity not only promotes the elimination of pores to achieve densification,but also increases bending strength,solar absorption,thermal storage density and oxidation resistance.A dense SiO_(2) layer was formed on the surface of SiC after 100 h oxidation at 1000℃,which protects the sample from further oxidation.However,excessive Co_(2)O_(3)will make the microstructure loose,which is disadvantageous to the performances of samples.
基金the National Natural Science Foundation of China(Nos.51732001,U1832219,and 51972013)Beijing Natural Science Foundation(No.2182035)+1 种基金the Fundamental Research Funds for the Central Universities,the Program of China Scholarships Council(No.201806020161)the Academic Excellence Foundation of Beihang University(BUAA)for Ph.D.Students.
文摘This paper demonstrates an intrinsic modulation of the cutoff wavelength in the spectra for solar selective absorbing coating based on high-entropy films.The(NiCuCrFeSi)N((NCCFS)N)films were deposited by a magnetron sputtering system.Rutherford backscattering spectroscopy analysis confirms the uniform composition and good homogeneity of these high-entropy films.The real and imaginary parts of the permittivity for the(NCCFS)N material are calculated on the basis of the reflectance spectral fitting results.A redshift cutoff wavelength of the reflectance spectrum with increasing nitrogen gas flow rate exists because of the different levels of dispersion when changing nitrogen content.To realize significant solar absorption,the film surface was reconstituted to match its impedance with air by designing a pyramid nanostructure metasurface.Compared with the absorptance of the as-deposited films,the designed metasurface obtains a significant improvement in solar absorption with the absorptance increasing from 0.74 to 0.99.The metasurfaces also show low mid-infrared emissions with thermal emittance that can be as low as 0.06.These results demonstrate a new idea in the design of solar selective absorbing surface with controllable absorptance and low infrared emission for high-efficiency photo-thermal conversion.
基金Funded by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China(No.2018YFB1501002)。
文摘Al_(2)O_(3)/SiC composite ceramics were prepared fromα-Al_(2)O_(3) and SiC by a pressureless sinter method in this study.The effect of SiC contents on the mechanic properties,phase compositions and microstructure is studied.Experimental results show that the vickers hardness,wear resistance and thermal conductivity of the samples increase with the increase in the SiC content,and the hardness of the sample reaches 16.22 GPa,and thermal conductivity of the sample reaches 25.41 W/(m.K)at room temperature when the SiC content is 20 wt%(B5)and the sintering temperature is at 1640℃.Higher hardness means higher scour resistance,and it indicates that the B5 material is expected to be used for the solar heat absorber of third generation solar thermal generation.The results indicate the mechanism of improving mechanical properties of Al_(2)O_(3)/SiC composite ceramics:SiC plays a role in grain refinement that the grain of SiC inhibits the grain growth of Al_(2)O_(3),while the addition of SiC changes the fracture mode from the intergranular to the intergranular-transgranular.
基金Supported by the National Natural Science Foundation of China under Grant No 61565015the Western Light Talent Training Program of Chinese Academy of Sciences
文摘The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor of 1.07 enhancement for an electrical field in a metal microcavity. The enhancement is considered to be the fact that strong exciton-photon coupling occurs in the microcavity due to ultrathin Ag. On the basis of the optical enhancement effect, optical behaviors are manipulated by varying the microcavity length. It is confirmed that ultrathin silver can serve as an ideal interconnection layer as the active layer is ~ 150nm thick and the thickness ratio between front and rear active layers lies between 1:1 and 1:2.
基金supported by National Natural Science Foundation of China(51590901&51876112&51906132&51906123)Shanghai Municipal Natural Science Foundation(Grant No.17ZR1411000)+1 种基金the Key Subject of Shanghai Polytechnic University(Material Science and engineeringGrant Nos.XXKZD1601 and EGD18YJ0042)。
文摘Nanofluids based direct absorption solar collectors(DASCs) are considered as the important alternative for further improve the utilization of solar energy. However the low-quality energy and aggregation of nanoparticles obstructs their large-scale application. In this work, a new method of using magnetic nanofluids in DASCs is proposed. By this method, not only high-quality energy is got as well as the problems of blockage and corrosion in heat exchanger are well avoided. The result shows that the maximum temperature can reach 98℃ under 3 solar irradiations and the photothermal conversion efficiency can be further increased by 12.8% when the concentration is 500 ppm after adding an external rotating magnetic field. The highest viscosity of working fluid reduced by 21% when the concentration is 500 ppm at 95℃ after separating the Fe_(3)O_(4)@C nanoparticles from the nanofluids via magnetic separation technology. Meanwhile, the obtained pure base liquids with high temperature flow to heat exchanger, which also reduces the flow resistance in pipeline and avoids the problems such as blockage and corrosion in heat exchanger. This research promotes a new way for the efficient utilization of solar energy.
文摘The actual treatise represents a synopsis of six important previous contributions of the author, concerning atmospheric physics and climate change. Since this issue is influenced by politics like no other, and since the greenhouse-doctrine with CO<sub>2</sub> as the culprit in climate change is predominant, the respective theory has to be outlined, revealing its flaws and inconsistencies. But beyond that, the author’s own contributions are focused and deeply discussed. The most eminent one concerns the discovery of the absorption of thermal radiation by gases, leading to warming-up, and implying a thermal radiation of gases which depends on their pressure. This delivers the final evidence that trace gases such as CO<sub>2</sub> don’t have any influence on the behaviour of the atmosphere, and thus on climate. But the most useful contribution concerns the method which enables to determine the solar absorption coefficient β<sub>s</sub> of coloured opaque plates. It delivers the foundations for modifying materials with respect to their capability of climate mitigation. Thereby, the main influence is due to the colouring, in particular of roofs which should be painted, preferably light-brown (not white, from aesthetic reasons). It must be clear that such a drive for brightening-up the World would be the only chance of mitigating the climate, whereas the greenhouse doctrine, related to CO<sub>2</sub>, has to be abandoned. However, a global climate model with forecasts cannot be aspired to since this problem is too complex, and since several climate zones exist.
基金Project supported by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China(Grant No.2012BAJ24B02)the National Natural Science Foundation of China(Grant Nos.40905011 and 41105022)
文摘Fourier transform spectrometry has played an important role in the three-dimensional greenhouse gas monitoring as the focus of attention on global warming in the past few years. In this paper, a ground-based low-resolution remote sensing system measuring the total columns of CO2 and CH4 is developed, which tracks the sun automatically and records the spectra in real-time and has the advantages of portability and low cost. A spectral inversion algorithm based on nonlinear least squares spectral fitting procedure for determining the column concentrations of these species is described. Atmospheric transmittance spectra are computed line-by-line in the forward model and observed on-line by direct solar radiation. Also, the wavelength shifts are introduced and the influence of spectral resolution is discussed. Based on this system and algorithm, the vertical columns of O2, CO2, and CH4 are calculated from total atmospheric observation transmittance spectra in Hefei, and the results show that the column averaged dry-air mole fractions of CO2 and CH4 are measured with accuracies of 3.7% and 5%, respectively. Finally, the H2O columns are compared with the results observed by solar radiometer at the same site and the calculated correlation coefficient is 0.92, which proves that this system is suitable for field campaigns and used to monitor the local greenhouse gas sources under the condition of higher accuracy, indirectly.
基金supported by the National Natural Science Foundation of China(Grant Nos.51820105010 and 52076106)the support from Natural Science Foundation of Jiangsu Province(Grant No.BK20202008).
文摘Calcium carbonate is promising thermochemical heat storage material for next-generation solar power systems due to its high energy storage density,low cost,and high operation temperature.Researchers have tried to improve energy storage performances of calcium carbonate recently,but most researches focus on powders,which are not suitable for scalable applications.Here,novel granular porous calcium carbonate particles with very high solar absorptance,energy storage density,abrasive resistances,and energy storage rate are proposed for direct solar thermochemical heat storage.The average solar absorptance is improved by 234%compared with ordinary particles.Both cycle stability and abrasive resistances are excellent with almost no decay of energy storage density over 25 cycles nor apparent particle weight loss over 24 h of continuous operation insides a planetary ball mill.In addition,the decomposition temperature is reduced by 2.8%–5.6%while the reaction rate of heat storage is enhanced by 80%–205%depending on the CO_(2) partial pressure.The decomposition process of doped granular porous CaCO_(3) particles is found to involve three overlapping processes.This work provides new routes to achieve scalable direct solar thermochemical heat storage for next-generation high-temperature solar power systems.
基金the National Natural Science Foundation of China(51871081,11674078 and 51971081)the Natural Science Foundation of Guangdong Province of China(2018A0303130033)+1 种基金Shenzhen Fundamental Research Project(JCYJ20170811155832192)Natural Scientific Research Innovation Foundation in Harbin Institute of Technology(HIT.NSRIF.2020060).
文摘Controlling the distribution of solar spectrum in different bands would boost the energy harvesting efficiency and optimize the energy dispatchability.1D photonic crystal with intrinsic optical band gap can be used to split the solar spectrum for hybrid photovoltaic/thermal solar applications.Here,we designed an efficient solar spectrum optical filter based on a cermet layer,Si/SiO_(2)1D photonic crystal,and top heterostructure layer.Compared with 1D photonic crystal structure,the 1D photonic crystal heterostructure with top YSZ layer can realize the reflectance of greater than 92%in PV band and the low average reflectance in two thermal bands by tuning the effective impedance of multilayer films.The enhanced reflectance in PV band results from the huge mismatching of impedance between free space and the heterostructure structure.The top dielectric layer can also be extended to other oxides.
基金supported by the National Natural Science Foundation of China(Grant No.52176016)。
文摘This research paper aims to perform dynamics analysis,3E assessment including energy,exergy,exergoeconomic,and the multiobjective evolutionary optimization on a novel solar Li-Br absorption refrigeration cycle.The research is time-dependent,owing to solar radiation variability during different timelines.Theoretically,all the necessary thermodynamic,energy,and exergy equations are applied initially.This is followed by the thermoeconomic analysis,which takes place after defining the designing variables during the thermoeconomic optimization process and is presented together with the economic relations of the system and its thermoeconomic characteristics.Furthermore,the sensitivity analysis is undertaken,the source of system inefficiency is determined,the multi-objective evolutionary optimization of the whole system is carried out,and the optimal values are compared with the primary stage.Engineering Equation Solver(EES)software has been used to accomplish comprehensive analyses.As part of the validation process,the results of the research are compared with those published previously and are found to be relatively consistent.
文摘If the heat of road surface can be stored in summer, the road surface temperature will be decreased to prevent permanent deformation of pavement. Besides, if the heat stored is released, it can supply heat for buildings or raise the road surface temperature for snow melting in winter. A road-solar energy system was built in this study, and the heat transfer mechanism and effect of the system were analyzed according to the monitored solar radiant heat, the solar energy absorbed by road and the heat stored by soil. The results showed that the road surface temperature was mainly affected by solar radiation, but the effect is hysteretic in nature. The temperature of the solar road surface was 3~C-6~C lower than that of the ordinary road surface. The temperature of the solar road along the vertical direction was 2~C-5~C lower than that of the ordinary road. The temperature difference increased as the distance to the heat transfer tubes decreased. The average solar collector efficiency of the system was 14.4%, and the average solar absorptivity of road surface was 36%.
文摘Recently, a solar thermal collector often employs nanoparticle suspension to absorb the solar radiation directly by a working fluid as well as to enhance its thermal performance. The collector efficiency of a direct absorption solar collector (DASC) is very sensitive to optical properties of the working fluid, such as absorption and scattering coefficients. Most of the existing studies have neglected particle scattering by assuming that the size of nanoparticle suspension is much smaller than the wavelength of solar radiation (i.e., Rayleigh scattering is applicable). If the nanoparticle suspension is made of metal, however, the scattering cross-section of metallic nanoparticles could be comparable to their absorption cross-section depending on the particle size, especially when the localized surface plasmon (LSP) is excited. Therefore, for the DASC utilizing a plasmonic nanofluid supporting the LSP, light scattering from metallic particle suspension must be taken into account in the thermal analysis. The present study investigates the scattering effect on the thermal performance of the DASC employing plasmonic nanofluid as a working fluid. In the analysis, the Monte Carlo method is employed to numerically solve the radiative transfer equation considering the volume scatter- ing inside the nanofluid. It is found that the light scattering can improve the collector performance if the scattering coefficient of nanofluid is carefully engineered depending on its value of the absorption coefficient.
基金financially supported by the National Natural Science Foundation of China(Nos.51562020 and 51575253)。
文摘Access to safe drinking water has become an extremely urgent research topic wo rldwide.In recent years,the technology of solar vapor generation has been extensively explored as a potential and effective strategy of transforming elements content in seawater.In this review,the basic concepts and theories of metal-based photothermal vapor generation device(PVGD) with excellent optical and thermal regulatory are introduced.In the view of optical regulation,how to achieve high-efficiency localized evaporation in different evaporation system(i.e.,volumetric solar heating and interface solar heating) is discussed;from the aspect of thermal regulation,the importance of selective absorption surface for interfacial PVGD is analyzed.Based on the above discussion and analysis,we summarize the challenges of metal-based desalination device.
文摘The two-stream approximation is applied to solve the multiple scattered radiation transfer equations for an inhomogeneous aerosol atmosphere.The accurate absorption of water vapor,ozone,carbon dioxide and molecular oxygen is calculated.Calculations have been carried out band by band for the beating rate of atmosphere.The results show that the effect of aerosols on solar heating of the atmosphere is significant.
文摘Optical absorption in thin-film solar cells can be improved by using surface plasmons for guiding and confining the light on the nanoscale.We report theoretical and simulation studies of a-Si thin-film solar cells with silver nanocylinders on the surface.We found that surface plasmons increased the cells' spectral response over almost the entire studied solar spectrum.In the ultraviolet range and at wavelengths close to the Si band gap we observed a significant enhancement of the absorption for both thin-film and wafer-based structures.We also performed optimization studies of particle size,inter-particle distance,and dielectric environment,for obtaining maximal absorption within the substrate.A blue-shift of the resonance wavelength with increasing inter-particle distance was observed in the visible range.Cell performance improved at optimal spacing,which strongly depended on the nanoparticle size.Increasing the nanocylinder size was accompanied by the widening of the plasmon resonance band and a red-shift of the plasmon resonance peaks.A weak red-shift and plasmon peak enhancement were observed in the reflectance curve with increasing refractive index of the dielectric spacer.
文摘A new process of flat absorber black nickel alloy coating tion from a bath containing nickel, zinc and ammonium was developed on stainless steel by electrodeposi- sulphates; thiocyanate and sodium hypophosphite for space applications. Coating process was optimized by investigating the effects of plating parameters, viz concentration of bath constituents, current density, temperature, pH and plating time on the optical properties of the black deposits. Energy dispersive X-ray spectroscopy showed the inclusion of about 6% phosphorous in the coating. The scanning electron microscopy studies revealed the amorphous nature of the coating. The corrosion resistance of the coatings was evaluated by the electrochemical impedance spectroscopy (EIS) and linear polarization (LP) techniques. The results revealed that, phosphorous addition confers better corro- sion resistance in comparison to conventional black nickel coatings. The black nickel coating obtained from hypophosphite bath provides high solar absorptance (αs) and infrared emittance (εIR) of the order of 0.93. Environmental stability to space applications was established by the humidity and thermal cycling tests.
基金supported by the National Natural Science Foundation of China(Nos.51761015,11764020,11804134,and 62065007)Natural Science Foundation of Jiangxi Province(Nos.20182BCB22002,20202BBEL53036,and 20202BAB201009)。
文摘Perfect absorbers(PAs)are devices that can efficiently absorb electromagnetic waves.Great attention has been attracted since metamaterial PAs(MPAs)were first proposed in 2008.In recent years,with the development of nanophotonics and the improvement of nanomanufacturing technology,considerable progresses have been achieved in designing MPAs using new materials and new structures.In this review,we summarized first the latest developments of PAs from five directions:dualband,multi-band,wideband,narrow-band,and tunable light absorption.The shortcomings of the previous PAs and the latest improvements were introduced as well.Then,the application of perfect absorption in solar cells,sensors,switches,and structural colors was discussed.Finally,we presented the main challenges and prospects in these fields.Novel PAs for applications in a wide field of opto-electronic devices will continuously progress with breakthrough advances in absorbers related technology and science.