Microwave direct synthesis and thermoelectric properties of Mg_(2)Si by solid-state reaction

In order to reduce the oxidation and volatilization caused by Mg element in the traditional methods for synthesizing Mg2Si compounds,Mg2Si thermoelectric materials were prepared by solid state reaction and microwave radiation techniques.Structure and phase composition of the materials were investigated by X-ray diffraction.The electrical conductivity,Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 700 K.It is found that high purity Mg2Si powders can be obtained with excessive content of 8% Mg from the stoichiometric Mg2Si at 853 K and 2.5 kW for 30 min.A maximum dimensionless figure of merit,ZT,of about 0.13 was obtained for Mg2Si at 600 K.

Solid-state synthesis of Sr-and Co-doped LaMnO_3 perovskites

The synthesis process for La 1- x Sr x Mn 1- y Co y O 3- δ ( x = 0.2, 0.3; y = 0.2, 0.8, designated as LSMC below) perovskite oxides prepared by solid state reaction was investigated using DSC/TG, XRD, EPMA and particle size analysis methods. It was found that LSMCs were all of single phase and the synthesis process might be divided into three stages: the decomposition of reactants, the formation of LaMn(Co)O 3 based oxides, and the formation of LSMC solid solution. Typical average and the peak value of particle size, and the specific surface area are 14.65?μm, 16.4?μm and 1.38?m 2/mL, respectively, for mixed reactants and are 23.81?μm, 32.11?μm and 0.5?m 2/mL, respectively, for powder synthesized at 1?200?℃ for 8?h in air.

An Efficient Solid-State Synthesis of N-Aryl-2-phenyldiazenecarboxamides

A new and ancient solid-state reaction using K3Fe(CN)(6)/KOII to oxidize diaryl semicarbazides for preparing azo compounds has been reported. Nine N-aryl-2-phenyl-diazenecarboxamides have been synthesized in excellent yields with simple instrument.

Ba_2SbGaS_5 : Solid-state Synthesis, Crystal and Electronic Structures, and Property Characterization

Single crystal of Ba2SbGaSs has been synthesized by the high temperature solidstate reaction method. The compound crystallizes in the orthorhombic space group Pnma with a = 12.177（4）, b = 8.880（3）, c = 8.982（3） A, V= 971.4（6） A3, Z = 4, De = 4.284 g/cm3,μ = 14.487 mm-1, F（000） - 1096, the final R = 0.0171 and wR = 0.0384 for all data. The structure comprises an infinite one-dimensional 1∞[SbGaS5]4- anionic chain constructed from the GaS4 tetrahedra and the SbS5 polyhedra via sharing edge alternately. The paralleled 1∞[SbGaS5]4anionic chains engage with each other and form the two-dimensional Sb-Ga-S layer perpendicular to a-axis with the isolated Ba2＋ cations arranged between layers. The IR spectrum and the UV-Vis spectrum have been investigated. Also, the first-principles band structure and density of states calculations indicate that the compound belongs to indirect semiconductor with the band gap of 2.1 eV, which is supported by the UV-Vis diffuse reflectance results.

Carbon Nitride Nanowire Bundle and Tubes:Solid-state Synthesis,Characterization and Photoluminescent Properties

Graphite-like carbon nitride nanowire bundles were synthesized from melamine via the solid state thermolysis at relatively low temperature（400℃）.Hexagonal carbon nitride tubes were prepared for the first time by heating the nanowire bundles at 550 ℃ in argon atmosphere.The forming process of tubes and transformation of the molecular structures from s-triazine rings to tri-s-triazine units were analyzed.The blue and yellow-green emission photoluminescent（PL） properties of the products were investigated in detail,and the reasons for the differences of PL properties between the bundles and tubes were discussed.

A Green and Facile Solid-state Synthesis Method for the Preparation of Diazenecarboxamide Azo Compounds with Potassium Ferricyanide and Sodium Hydroxide System

Eleven new-typed azo compounds were synthesized in good yields by dehydrogenating the corresponding aryl substituted semicarbazides using potassium ferricyanide and sodium hydroxide system under solid-state conditions.

Solid-State Synthesis of Metastable Ytterbium (II) Oxide

Due to its electron configuration (Xe) 4 f14 6 s2, Ytterbium (Yb) could form divalent oxide, YbO. In this study, the solid-state synthesis of metastable YbO was investigated by the oxidation of Yb metal at normal pressure using two experimental conditions: 1) heat treatment of Yb metal under Ar gas atmosphere with metal carbonate as an oxygen source;and 2) heat treatment of Yb metal under the continuous gas flow condition using various gas atmospheres. Products were identified using the powder X-ray diffraction and scanning electron microscope. It was found that almost single phase YbO was obtained in the experimental condition 1) using the molar ratio of Ca-CO3/Yb = 0.4. Thermodynamic calculations suggested that the YbO formation be controlled not by thermodynamics but by kinetics, and further that the evaporation of Yb metal in the BN crucible played a key role for the formation of the meta-stable YbO.

ResearchonS202一／Zr02solidsuperacidinsynthesisofn—amylacetateundermicrowaveradiation

采用沉淀一浸渍法制得S2O62 8-／ZrO2固体超强酸，在微波辐射下催化合成乙酸正戊酯。通过单因素实验和正交实验优化了合成的反应条件；采用Hammett指示剂法、BET法、红外光谱、电子透镜技术和x_射线衍射对其进行了表征。实验结果表明，采用最佳制备条件下得到的催化剂在微波辐射下催化合成乙酸正戊酯的最优合成条件为：醇酸摩尔比1．9：1，反应温度135℃，反应时间25min，催化剂用量1．2g，功率500W，收率为97．8％。该工艺具有绿色、安全、操作简单和收率高等优点。

Structure, synthesis, and catalytic properties of nanosize cerium-zirconium-based solid solutions in environmental catalysis

Nanosize cerium-zirconium solid solution(CZO)with a special fluorite structure has received an increasing research interest due to their remarkable advantages such as excellent oxygen storage capacity and great flexibility in their composition and structure.By partial metal(including rare earth,transition,alkaline earth or other metal)doping into CZO,the physicochemical properties of these catalytic materials can be controllable adjusted for the study of specific reactions.To date,nanosize CZO has been prepared by co-precipitation,sol-gel,surfactant-assisted approach,solution combustion,micro-emulsion,high energy mechanical milling,etc.The advent of these methodologies has prompted researchers to construct well-defined networks with customized micromorphology and functionalities.In this review,we describe not only the basic structure and synthetic strategies of CZO,but also their relevant applications in environmental catalysis,such as the purification for CO,nitrogen oxides(NOx),volatile organic compounds(VOC),soot,hydrocarbon(HC),CO2 and solid particulate matters(PM),and some reaction mechanisms are also summarized.

Synthesis of dimethyl carbonate by gas-phase oxidative carbonylation of methanol in the presence of solid catalyst I. Catalyst preparation and catalytic Properties

The gas-phase synthesis of dimethyl carbonate (DMC) from methanol, carbon monoxide and oXygen has here Studied in a flow system at atomspheric Pressure. A series of Catalyst used in this reaCtion have been prepared and evaluated. The influence of trivared carbon supporters, alkaline metal Promoters and operation conditions on DMC opthesis reaction has been discussed. Under the conditions of 130℃, CO/O2=1 .96, SV=3340h-1, the space-time yield (STY) of DMC over PdCl2-CuCl2-CH3COOK/ac. catalyst is 217g/l-cat h,which is higher than what is published in the literatUre so far.

Synthesis and thermoelectric properties of Mg_2Si_(1-x)Sn_x solid solutions by microwave irradiation

In order to reduce the oxidizing and volatilizing caused by Mg element in the traditional methods for synthesizing Mg2Sil-xSnx （x=0.2, 0.4, 0.6, 0.8） solid solutions, microwave irradiation techniques were used in preparing them as thermoelectric materials. Structure and phase composition of the obtained materials were investigated by X-ray diffraction （XRD）. The electrical conductivity, Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 750 K. It is found that Mg2Si1-xSnx solid solutions are well formed with excessive content of 5% （molar fraction） Mg from the stoichiometric MgESil.xSnx under microwave irradiation. A maximum dimensionless figure of merit, ZT, of about 0.26 is obtained for Mg2Si1-xSnx solid solutions at about 500 K for x=0.6.

A Solid Phase Synthesis of Chalcones by Claisen-Schmidt Condensations

In order to accelerate the development of relatively inexpensive antimalarials that are effective against chloroquine-resistant strains of Plasmodium falciparum, a methodology for the solid phase synthesis of chalcone (1, 3-diphenyl-2-propen-1-one) analogues in reasonably high yields has been developed.

Microwave-induced synthesis and characterization of nanometer Ce_(0.5)Zr_(0.5)O_2 solid solution for the acidic catalytic reaction

Ce0.5Zr0.5O2 solid solution was successfully synthesized using cerium nitrate, zirconium nitrate, and urea as raw materials by the microwave irradiation method and characterized by X-ray diffraction, fluorescence spectrum, transmission electron microscopy, and infrared spectrum. Its acid catalytic activity was evaluated in the esterification reaction of acetic acid and n-butyl alcohol. The results show that Ce0.5Zr0.5O2 solid solution has cubic fluorite structure, and its particle diameter is in the nanometer scale. As a sort of solid acid, it possesses a higher acid catalytic activity and can be easily separated from reaction liquids. It can be used for several times, and basically, its activity keeps constant. The proton acid sites and Lewis acid sites exist in the structure of Ce0.5Zr0.5O2 solid solution.

Synthesis of 2, 6 Bis(1′-Phenyl- 3′- Methyl-5′-Oxopyrazole- 4′) Pyridinediacyl and Its Solid Liquid Extraction Behavior for Ce(Ⅲ)

diketone type chelating ligands have high coordinative activity and selectivity, and are widely applied in analytical chemistry. In order to obtain profounder understanding to the properties of bis(4 acylpyrazolone 5), A new 4 acylpyrazol 5 one derivative (H 2BPMPP) was syntheszed, which contains a heterocyclic ring between two 1 phenyl 3 methyl 4 acylpyrazol 5 one rings. The new compound was characterized by element analyses, UV, IR and 1H NMR spectra. The equilibrium of the keto enol tautomerism was studied. The results show that a lower dielectric constant of solvent favors the enol form which has a higher λ max . Due to special merits of paraffin wax, the solid liquid extraction behavior of Ce(Ⅲ) with molten paraffin wax as a diluent was also investigated at higher temperature. The value of the pH 1/2 was 3.19 and the value of log K ex was 3.467. The chemical composition of the complex was obtained by the slope analysis method.

A Facile Solid-phase Synthesis of 3-Carboxycoumarins

Carboxycoumsrins were synthesized via the solid phase synthesis conviently. The resin bound cyclic malonic ester reacted with o-methoxy or o-hydroxybenzaldehydes. Then cyclization was processed under H2SO4 to afford the products in excellent purities and yields.

Synthesis of La_(0.9)Sr_(0.1)Ga_(0.8)Mg_(0.2)O_(3-δ) Powder for Solid Oxide Fuel Cell by a Nitrate-Citrate Combustion Route

A nitrate-citrate combustion route to synthesize La0.9Sr0.1Ga0.8Mg0.2O3-σ powder for solid oxide fuel cell application was presented. This route is based on the gelling of nitrate solutions by the addition of citric acid and ammonium hydroxide, followed by an intense combustion process due to an exothermic redox reaction between nitrate and citrate ions. The optimum technical parameters are that the pH value is 5, and the molar ratio of citric acid to the total metallic ion is 1.5:1. X-ray diffraction characterization of calcined gel shows that pure phase was synthesized after calcination at 1400℃for 10 h, and the TEM result shovvs the calcined powder with average particle size is about 150 nm. The grain resistance contributes to the total resistance of sintered peliet below 500℃. The conductivity of the sintered peliet at 800℃ was 0.07 S-1·cm-1 higher than the conductivity of YSZ (0.05 S-1·cm-1 at 800℃)

Low-Temperature Solid State Synthesis and Characterization of Superconducting Vanadium Nitride

Superconducting vanadium nitride （VN） is successfully synthesized by a solid-state reaction of vanadium pentox- ide, sodium amide and sulfur in an autoclave at a relatively low temperature （240-400℃）. The obtained samples are characterized by x-ray diffraction, x-ray photoelectron spectroscopy and transmission electron microscopy. The result of the magnetization of the obtained VN product as a function of temperature indicates that the onset superconducting transition temperature is about 8.4K. Furthermore, the possible reaction mechanism is also discussed.

Kinetics of synthesis of Li_4Ti_5O_(12) through solid-solid reaction

Sohd-solid reaction under low heat or low temperature is an approach to synthesize various kinds of materials that were widely used in electrochemistry field. In this paper a theoretical treatment has been presented for analyzing the mechanism of sohd-solid reaction and deriving a series of formulae to describe the variation and rate of reactions. This new model has been used in the manufacturing of spinel Li4Ti5O12. The results show that this new model works very well and will play a useful role for guiding the manufacturing of electrochemical materials.

Solid-phase synthesis of Cu2MoS4 nanoparticles for degradation of methyl blue under a halogen-tungsten lamp

The Cu_2MoS_4 nanoparticles were prepared using a relatively simple and convenient solid-phase process, which was applied for the first time. The crystalline structure, morphology, and optical properties of Cu_2MoS_4 nanoparticles were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and UV-vis spectrophotometry. Cu_2MoS_4 nanoparticles having a band gap of 1.66 eV exhibits good photocatalytic activity in the degradation of methylene blue, which indicates that this simple process may be critical to facilitate the cheap production of photocatalysts.

Synthesis of a highly hydrophobic cyclic decapeptide by solid-phase synthesis of linear peptide and cyclization in solution

A general method was described to synthesize a highly hydrophobic cyclic peptide,cyclo[LWLWLWLWLQ]where underlines indicate D-configuration of the amino acid,by a two-step solid-phase/solution synthesis strategy.The linear decapeptide was assembled by standard Boc chemistry on solid-phase and subsequently cyclized in solution with high efficiency and reproducibility. In subsequent purification by semi-preparative HPLC,50%(v/v) DMF/H_2O was employed as the solvent to overcome the difficulty of solubilization...