Sound absorption property of wood for five eucalypt species

The sound absorption coefficients of wood and wood boards for five eucalypt species (Eucalyptus urophylla, Euca-lyptus urophylla E. grandis, Eucalyptus urophylla E. tereticornis, Eucalyptus urophylla E. camaldulensis and Eucalyptus cloeziana) that were collected from plantation in Dongmen Forestry Center of Guangxi Province, China were tested with stand-ing wave method and their sound absorption properties were also compared. The results showed that the sound absorption co-efficients of the five eucalypt wood species did not change evidently below 1000 Hz, but above 1000 Hz their sound absorption coefficients increased with the increasing frequency. The difference in sound absorption coefficient among five species of eucalypt wood is not evident at the tested frequency range (200-2000 Hz), but the sound absorption property of Eucalyptus urophylla at low frequency is better than that of other four species. The sound absorption coefficient of the tangential-sawn board is higher than that of the radial-sawn board. The sound absorption property of eucalypt wood of 0.5 cm in thickness is much better than that of 1.0 cm in thickness. It is concluded that wood sound absorption properties of eucalypts are affected by their board thickness and the type of sawn timber within the testing frequency, but the variance of wood sound absorption property among the five tested species is not significant.

Development of a High Sound Absorption Material CEMCOM

Based on sound absorption mechanism of material,the special sound absorption material CEMCOM for road sound insulation is introduced.This high sound absorption material is mainly composed of expanded perlite.Using multiple sound absorption structure can improve sound absorption property of material.According to the preparation principle and durability design of material,a new kind of material with low cost and high durability is developed.

Sound absorption performance of various nickel foam-base multi-layer structures in range of low frequency

Commercial3D reticular nickel foam and its composite structure were investigated on the sound absorption at200-2000Hz.The absorption performance of foam plates1?5layers(1-layer thickness:2.3mm;porosity:89%;average pore-diameter:0.57mm)was found to be poor,and could be improved by adding backed cavum or front perforated thin sheet.The absorption coefficient could reach about0.4at1000-1600Hz for the composite structure of5-layer foam with a backed5mm-thick cavum,and even0.68at about1000Hz for that of2-layer foam with the same cavum and a perforated plate closely in front of the foam.

Sound absorption property of open-pore aluminum foams

This paper presents a study on sound absorption property of aluminum foam by evaluating its sound absorption coefficients using standing wave tube method. Experimental results showed that the average values of sound absorption coefficients (over the test frequency range) are all above 0.4, which indicate very good sound absorption property of the aluminum foams. The sound absorption coefficient is affected by frequency and pore structure, and reaches its maximum value at around 1 000 Hz. With the increase of porosity and decrease of cell diameter, the sound absorption coefficient values increase.

Sound absorption of several various nickel foam multilayer structures at aural frequencies sensitive for human ears

Using the three-dimensional reticular nickel foam as experimental material, the sound absorption performance was investigated for several various multilayer structures in the frequency range of 2000-4000 Hz, which is aurally sensitive for human ears. The results showed that the 7.5 mm-thick foam sample, which was formed by piling of 5-layer foam plate（thickness： 1.5 mm; porosity： 96%; average pore-diameter： 0.65 mm） could exhibit an excellent sound absorption effect at 4000 Hz, with the absorption coefficient about 0.8. Constituting alternate air gap with the total thickness of about 18.5 mm can greatly improve the absorption performance at relatively low frequencies of 2000-3150 Hz, with the absorption coefficient up to about 0.5 or more. In addition, the research showed that alternate piling up the perforated plate inside the foam plates can also achieve a quite good effect of sound absorption at relatively low frequencies.

Sound absorption performance of acoustic metamaterials composed of double-layer honeycomb structure

The purpose of the research is to assess the sound absorption performance(SAP)of acoustic metamaterials made of double-layer Nomex honeycomb structures in which a micro-orifice corresponds to a honeycomb unit.For this purpose,the influences of structural parameters on the SAP of acoustic metamaterials were investigated by using experimental testing and a validated theoretical model.In addition,the sandwich structure was optimized by the genetic algorithm.The research shows that the panel thickness and micro-orifice diameter mainly affect the second resonant frequency and second peak sound absorption coefficient(SAC)of the structure.The unit cell size is found to influence the first and second resonant frequencies and two peaks of the SAC.An extremely low side-length of the honeycomb core decreases the SAP of the structure for low-frequency noise signals.Additionally,the sandwich structure presents a better SAP when the diameter of micro-orifices on the front micro-perforated panel(MPP)exceeds that of the back MPP.The sandwich structure shows better noise reduction performance after the optimization aiming at the noise frequency outside trains.

Research on the coefficient of sound absorption in turbid water

China’s coastal waters are turbid and the properties of the seabed are complex. This negatively impacts the performance of underwater detection equipment. The properties of sound absorption in turbid water are not well understood. In this paper, the coefficient of sound absorption in turbid water was measured by the reverberation technique. All work was done in a reverberation barrel made of seamless aluminum. First, pure water was poured into the reverberation barrel and its reverberation time measured. Next, various concentrations of turbid water were poured into the barrel and their reverberation time measured. After all data had been gathered, the coefficient of sound absorption in turbid water of different concentrations was calculated. From this we determined a law of sound absorption in turbid water as summarized in the paper.

Optimization of Sound Absorption and Insulation Performances of a Dual-Cavity Resonant Micro-Perforated Plate

This study investigates a dual-cavity resonant composite sound-absorbing structure based on a micro-perforated plate.Using the COMSOL impedance tube model,the effects of various structural parameters on sound absorption and sound insulation performances are analyzed.Results show that the aperture of the micro-perforated plate has the greatest influence on the sound absorption coefficient;the smaller the aperture,the greater is this coefficient.The thickness of the resonance plate has the most significant influence on the sound insulation and resonance frequency;the greater the thickness,the wider the frequency domain in which sound insulation is obtained.In addition,the effect of filling the structural cavity with porous foam ceramics has been studied,and it has been found that the porosity and thickness of the porous material have a significant effect on the sound absorption coefficient and sound insulation,while the pore size exhibits a limited influence.

Sound Absorption Enhancement by Thin Multi-Slit Hybrid Structures

We report an extraordinary sound absorption enhancement in low and intermediate frequencies achieved by a thin multi-slit hybrid structure formed by incorporating micrometer scale micro-slits into a sub-millimeter scale meso-slit matrix. Theoretical and numerical results reveal that this exotic phenomenon is attributed to the noticeable velocity and temperature gradients induced at the junctures of the micro- and meso-slits, which cause significant loss of sound energy as a result of viscous and thermal effects. It is demonstrated that the proposed thin multi-slit hybrid structure with micro-scale configuration is capable of controling low frequency noise with large wavelength, which is attractive for applications where the size and weight of a sound absorber are restricted.

Improving the Sound Absorption Properties of Flexible Polyurethane (PU) Foam using Nanofibers and Nanoparticles

Polyurethane foam as the most well-known absorbent materials has a suitable absorption coefficient only within a limited frequency range.The aim of this study was to improve the sound absorption coefficient of flexible polyurethane(PU)foam within the range of various frequencies using clay nanoparticles,polyacrylonitrile nanofibers,and polyvinylidene fluoride nanofibers.The response surface method was used to determine the effect of addition of nanofibers of PAN and PVDF,addition of clay nanoparticles,absorbent thickness,and air gap on the sound absorption coefficient of flexible polyurethane foam(PU)across different frequency ranges.The absorption coefficient of the samples was measured using Impedance Tubes device.Nano clay at low thicknesses as well as polyacrylonitrile nanofibers and polyvinyl fluoride nanofibers at higher thicknesses had a greater positive effect on absorption coefficient.The mean sound absorption coefficient in the composite with the highest absorption coefficient at middle and high frequencies was 0.798 and 0.75,respectively.In comparison with pure polyurethane foam with the same thickness and air gap,these values were 2.22 times at the middle frequencies and 1.47 times at high frequencies,respectively.Surface porosity rose with increasing nano clay,but decreased with increasing polyacrylonitrile nanofibers and polyvinyl fluoride nanofibers.The results indicated that the absorption coefficient was elevated with increasing the thickness and air gap.This study suggests that the use of a combination of nanoparticles and nanofibers can enhance the acoustic properties of flexible polyurethane foam.

Sound absorption characteristic of micro-helix metamaterial by 3D printing

We present the design of micro-helix metamaterial supporting high sound absorption characteristic by 3D printing. The sample structure which is fabricated out of polylactide （PLA） material, many micro-helix are arranged by periodic arrays on XY plane. Experiment measurement results show that different geometrical dimensions of helix vestibule and cavity depth have a great effect on sound absorption coefficient. Physical mechanism depends on the friction and viscosity between the air and the helix vestibule. This work shows great potential of micro-structure metamaterial in noise control applications require light weight and large rigid of sound absorption.

The vibroacoustic response and sound absorption performance of multilayer, microperforated rib-stiffened plates

The vibroacoustic response and sound absorption performance of a structure composed of multilayer plates and one rigid back wall are theoretically analyzed. In this structure, all plates are two-dimensional, microperforated, and periodically rib-stiffened. To investigate such a structural system, semianalytical models of one-layer and multilayer plate structures considering the vibration effects are first developed. Then approaches of the space harmonic method and Fourier transforms are applied to a one-layer plate, and finally the cascade connection method is utilized for a multilayer plate structure. Based on fundamental acoustic formulas, the vibroacoustic responses of microperforated stiffened plates are expressed as functions of a series of harmonic amplitudes of plate displacement, which are then solved by employing the numerical truncation method. Applying the inverse Fourier transform, wave propagation, and linear addition properties, the equations of the sound pressures and absorption coefficients for the one-layer and multilayer stiffened plates in physical space are finally derived. Using numerical examples, the effects of the most important physical parameters-for example, the perforation ratio of the plate, sound incident angles, and periodical rib spacing-on sound absorption performance are examined. Numerical results indicate that the sound absorption performance of the studied structure is effectively enhanced by the flexural vibration of the plate in water. Finally, the proposed approaches are validated by comparing the results of stiffened plates of the present work with solutions from previous studies.

Experimental investigation of sound absorption in a composite absorber

A composite absorber made of a polyurethane sponge and multi-layer micro-perforated plates is pre-sented in this study.Results from an acoustic impedance tube test show that the polyurethane sponge can exhibits higher low-frequency sound absorption in front of the micro-perforated plate,while sound absorption at medium and high-frequencies remains low.The physical mechanism behind this is that the micro-perforated plate increases the denpth cavity.If the polyurethane sponge is placed behind the micro-perforated plate,the amplitude of the original absorption peak will remain constant,but the ab-sorption peaks will shift to lower frequencies.The reason for this phenomenon is that porous materials with low flow resistance can be approximately equivalent to fluid,which not only does not affect the res-onance absorption coefficient of micro-perforated plate,but also makes the peaks move to low frequency.This study has the potential applications in the sound absorption design of composite structure.

Experimental and Numerical Procedures of a Sonar Platform with a Sound Absorption Wedge

Experiments involving a sonar platform with a sound absorption wedge were carried out for the purpose of obtaining the low frequency acoustic characteristics. Acoustic characteristics of a sonar platform model with a sound absorption wedge were measured, and the effects of different wedge laid areas on platform acoustic characteristic were tested. Vibration acceleration and self-noise caused by model vibration were measured in four conditions: 0%, 36%, 60%, and 100% of wedge laid area when the sonar platform was under a single frequency excitation force. An experiment was performed to validate a corresponding numerical calculation. The numerical vibration characteristics of platform area were calculated by the finite element method, and self-noise caused by the vibration in it was predicted by an experiential formula. The conclusions prove that the numerical calculation method can partially replace the experimental process for obtaining vibration and sound characteristics.

Improving the Cellular Characteristics of Aluminum Foam for Maximum Sound Absorption Coefficient Using Genetic Algorithm

Fabricating of metal foams with desired morphological parameters including pore size,porosity and pore opening is possible now using sintering technology.Thus,if it is possible to determine the morphology of metal foam to absorb sound at a given frequency,and then fabricate it through sintering,it is expected to have optimized metal foams for the best sound absorption.Theoretical sound absorption models such as Lu model describe the relationship between morphological parameters and the sound absorption coefficient.In this study,the Lu model was used to optimize the morphological parameters of aluminum metal foam for the best sound absorption coefficient.For this purpose,the Lu model was numerically solved using written codes in MATLAB software.After validating the proposed codes with benchmark data,the genetic algorithm(GA)was applied to optimize the affecting morphological parameters on the sound absorption coefficient.The optimization was carried out for the thicknesses of 5 mm to 40 mm at the sound frequency range of 250 Hz–8000 Hz.The optimized parameters ranged from 50%to 95%for porosity,0.1 mm to 4.5 mm for pore size,and 0.07 mm to 0.6 mm for pore opening size.The result of this study was applied to fabricate the desired aluminum metal foams for the best sound absorption.The novel approach applied in this study,is expected to be successfully applied in for best sound absorption in desired frequencies.

Effect of ocean environmental factors on sound absorption by boric acid relaxation in sea water

By using the expressions for the maximum absorption per wavelength (αλ),and the relaxation frequency fr of the boric acid relaxation derived previously by the author and employing the related oceanographic literatures, the effects of pressure, temperature, pH and salinity on (αλ)r and ∫r of the boric acid relaxation in sea water have been estimated. Results show that ( αλ), not only increases with pH but also increases approximately linearly with pressure and temperature, and is nearly proportional to the 1. 35 power of salinity. However, pressure, pH and salinity have negligible effect on ∫r; therefore, ∫r, can be approximately expressed as a function of temperature only. Comparisons of the predicted with the measured ( αλ)r and ∫r in different ocean areas are given.

Determination of the Sound Absorption Capacity of Hydraulic Concrete Mixtures Added with Waste Tire Rubber

There are different types of pollutants that are harmful to the environment, including smog, chemicals that are dumped into rivers, scrap tires, etc. The latter have the particularity that it is not possible to recycle them to manufacture new tires. In the present work, hydraulic concrete plates added with waste tire rubber were manufactured to modify their sound absorption capacity. It was found that the rubber additions produce changes in the density of the material and in the sound absorption capacity. When the material is exposed to high-frequency sounds that correspond to high-pitched sounds, its absorption capacity increases. On the contrary, when the test frequency is low, that is, bass sounds, the sound absorption capacity decreases. The results obtained in this work suggest that the proposed mixtures are suitable for the possible manufacture of acoustic insulating shields.

INVESTIGATION ON SOUND ABSORPTION PROPERTIES OF KAPOK FIBERS

Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical performances were evaluated by using an impedance tube instrument. Results show that the kapok fiber has excellent acoustical damping performance due to its natural hollow structure, and the sound absorption coefficients of kapok fibrous assemblies are significantly affected by the bulk density, thickness and arrangement of kapok fibers but less dependent on the fiber length. Compared with assemblies of commercial glass wool and degreasing cotton fibers, the kapok fiber assemblies with the same thickness but much smaller bulk density may have the similar sound absorption coefficients. Theoretical modelling of the acoustical damping performance of kapok fibers shows a good agreement with the experimental data. All the results demonstrate that kapok fiber is a promising light and environment-friendly sound absorption material.

Decoupling multimode vibrational relaxations in multi-component gas mixtures: Analysis of sound relaxational absorption spectra

Decoupling the complicated vibrational-vibrational （V-V） coupling of a multimode vibrational relaxation remains a challenge for analyzing the sound relaxational absorption in multi-component gas mixtures. In our previous work [Acta Phys. Sin. 61 174301 （2012）], an analytical model to predict the sound absorption from vibrational relaxation in a gas medium is proposed. In this paper, we develop the model to decouple the V-V coupled energy to each vibrationaltranslational deexcitation path, and analyze how the multimode relaxations form the peaks of sound absorption spectra in gas mixtures. We prove that a multimode relaxation is the sum of its decoupled single-relaxation processes, and only the decoupled process with a significant isochoric-molar-heat can be observed as an absorption peak. The decoupling model clarifies the essential processes behind the peaks in spectra arising from the multimode relaxations in multi-component gas mixtures. The simulation validates the proposed decoupling model.

Sound absorption performance of natural fibers and their composites

This research aimed to study the sound absorption properties of natural fibers and their reinforced composites.Sound absorption coefficients of three types of natural fibers,i.e.,ramie,flax and jute fibers and their composites were measured by the two-microphone transfer function technique in the impedance tube.The results were compared with synthetic fibers and their composites.It was found that both natural fibers and their composites had superior capability of noise reduction.The multi-scale and hollow lumen structures of natural fibers contributed to the high sound absorption performance.Moreover,the sound absorption properties of these natural fibers were also calculated by the Delany-Bazley and Garai-Pompoli models.They showed good agreement with the experimental data.It was concluded that multi-functional composite materials can be made by natural fibers so that both the mechanical and acoustical functions can be achieved.