Acoustic signals from diesel engines contain useful information but also include considerable noise components To extract information for condition monitoring purposes, continuous wavelet transform (CWT) is used for t...Acoustic signals from diesel engines contain useful information but also include considerable noise components To extract information for condition monitoring purposes, continuous wavelet transform (CWT) is used for the characterization of engine acoustics. This paper first reviews CWT characteristics represented by short duration transient signals. Wavelet selection and CWT are then implemented and wavelet transform is used to analyze the major sources of the engine front's exterior radiation sound. The research provides a reliable basis for engineering practice to reduce vehicle sound level. Comparison of the identification results of the measured acoustic signals with the identification results of the measured surface vibration showed good agreement.展开更多
Based on the problem that the generating method of random array structure is inefficient, a method is proposed to generate the random target arrays by using coaxial circu- lar array in the polar coordinates in the pre...Based on the problem that the generating method of random array structure is inefficient, a method is proposed to generate the random target arrays by using coaxial circu- lar array in the polar coordinates in the premise that the array angular resolution of source identification is guaranteed. According to the principle of moving sound source identification, this work deduces the basic non-equidistance coaxial circular rings＇ radius, and generates target random arrays which were suitable for moving sound source identification through array partitioning, condition filtering in the polar coordinates and simulation evaluation. Finally, numerical simulation and moving car sound source identification test have been done. The analytical results show that using this method to generate random array is effective. Compared with the traditional regular arrays, the target random array has more accurate moving sound source identification performance.展开更多
In this paper, a new method is applied to get the computation formula of partial coherence function. The main attention is paid to the computation formula of the partial coherence function with three and four signals....In this paper, a new method is applied to get the computation formula of partial coherence function. The main attention is paid to the computation formula of the partial coherence function with three and four signals. The advantages of the method discussed in the paper are clear in physical meaning and easy to compute at the end of the paper,the application of the method to the identification of an air compressor noise source is presented and the results are satisfactory.展开更多
This paper presents the method named acoustic holography which can be used to identify noise sources. A new formula of holography reconstruction is obtained, based on the Kirchhoff integral formula. Some simulating te...This paper presents the method named acoustic holography which can be used to identify noise sources. A new formula of holography reconstruction is obtained, based on the Kirchhoff integral formula. Some simulating tests are carried out using the new formula. The comparison with other reconstruction formulas proves that the new formula is more effective. By using acoustic holography method, some interesting results about the noise of a vehicle are shown. The results proves that acoustic holography is an effective method for the identification of the complex noise sources.展开更多
A schematic to make the spectra of the exterior noise of high speed railway was put forward. The exterior noise spectrum was defined based on the characteristics of the high-speed train exterior noise. Its characteris...A schematic to make the spectra of the exterior noise of high speed railway was put forward. The exterior noise spectrum was defined based on the characteristics of the high-speed train exterior noise. Its characteristics considered here include identifying the exterior main sources and their locations, their frequency components including the Doppler effect due to the noise sources moving at high speed, the sound field intensity around the train in high-speed operation, the sound radiation path out of the train, and the pressure level and frequency components of the noise at the measuring points specified by the International Organization for Standardization(ISO). The characteristics of the high-speed train exterior noise of the high speed railways in operation were introduced. The advanced measuring systems and their principles for clearly indentifying the exterior noise sources were discussed in detail. Based on the concerned noise results measured at sites, a prediction model was developed to calculate the sound level and the characteristics of the exterior noise at any point where it is difficult to measure and to help to make the exterior noise spectrums. This model was also verified with the test results. The verification shows that there is a good agreement between the theoretical and experimental results.展开更多
基金Project (No. 50175078) supported by the National Natural Science Foundation of China
文摘Acoustic signals from diesel engines contain useful information but also include considerable noise components To extract information for condition monitoring purposes, continuous wavelet transform (CWT) is used for the characterization of engine acoustics. This paper first reviews CWT characteristics represented by short duration transient signals. Wavelet selection and CWT are then implemented and wavelet transform is used to analyze the major sources of the engine front's exterior radiation sound. The research provides a reliable basis for engineering practice to reduce vehicle sound level. Comparison of the identification results of the measured acoustic signals with the identification results of the measured surface vibration showed good agreement.
基金supported by the National Natural Science Foundation of China(61271387)the Natural Science Foundation of Shandong Province(ZR2012FZ001)
文摘Based on the problem that the generating method of random array structure is inefficient, a method is proposed to generate the random target arrays by using coaxial circu- lar array in the polar coordinates in the premise that the array angular resolution of source identification is guaranteed. According to the principle of moving sound source identification, this work deduces the basic non-equidistance coaxial circular rings＇ radius, and generates target random arrays which were suitable for moving sound source identification through array partitioning, condition filtering in the polar coordinates and simulation evaluation. Finally, numerical simulation and moving car sound source identification test have been done. The analytical results show that using this method to generate random array is effective. Compared with the traditional regular arrays, the target random array has more accurate moving sound source identification performance.
文摘In this paper, a new method is applied to get the computation formula of partial coherence function. The main attention is paid to the computation formula of the partial coherence function with three and four signals. The advantages of the method discussed in the paper are clear in physical meaning and easy to compute at the end of the paper,the application of the method to the identification of an air compressor noise source is presented and the results are satisfactory.
基金This work wassupportedby the Natural Science Foundation of China(No.59775020).
文摘This paper presents the method named acoustic holography which can be used to identify noise sources. A new formula of holography reconstruction is obtained, based on the Kirchhoff integral formula. Some simulating tests are carried out using the new formula. The comparison with other reconstruction formulas proves that the new formula is more effective. By using acoustic holography method, some interesting results about the noise of a vehicle are shown. The results proves that acoustic holography is an effective method for the identification of the complex noise sources.
基金Project(2682013BR009)supported by the Fundamental Research Funds of the Central Universities,ChinaProject(2011AA11A103-2-2)the National High-Technology Research and Development Program of China
文摘A schematic to make the spectra of the exterior noise of high speed railway was put forward. The exterior noise spectrum was defined based on the characteristics of the high-speed train exterior noise. Its characteristics considered here include identifying the exterior main sources and their locations, their frequency components including the Doppler effect due to the noise sources moving at high speed, the sound field intensity around the train in high-speed operation, the sound radiation path out of the train, and the pressure level and frequency components of the noise at the measuring points specified by the International Organization for Standardization(ISO). The characteristics of the high-speed train exterior noise of the high speed railways in operation were introduced. The advanced measuring systems and their principles for clearly indentifying the exterior noise sources were discussed in detail. Based on the concerned noise results measured at sites, a prediction model was developed to calculate the sound level and the characteristics of the exterior noise at any point where it is difficult to measure and to help to make the exterior noise spectrums. This model was also verified with the test results. The verification shows that there is a good agreement between the theoretical and experimental results.
