Separation of closely spaced modes by combining complex envelope displacement analysis with method of generating intrinsic mode functions through filtering algorithm based on wavelet packet decomposition

One of the important issues in the system identification and the spectrum analysis is the frequency resolution, i.e., the capability of distinguishing between two or more closely spaced frequency components. In the modal identification by the empirical mode decomposition （EMD） method, because of the separating capability of the method, it is still a challenge to consistently and reliably identify the parameters of structures of which modes are not well separated. A new method is introduced to generate the intrin- sic mode functions （IMFs） through the filtering algorithm based on the wavelet packet decomposition （GIFWPD）. In this paper, it is demonstrated that the CIFWPD method alone has a good capability of separating close modes, even under the severe condition beyond the critical frequency ratio limit which makes it impossible to separate two closely spaced harmonics by the EMD method. However, the GIFWPD-only based method is impelled to use a very fine sampling frequency with consequent prohibitive computational costs. Therefore, in order to decrease the computational load by reducing the amount of samples and improve the effectiveness of separation by increasing the frequency ratio, the present paper uses a combination of the complex envelope displacement analysis （CEDA） and the GIFWPD method. For the validation, two examples from the previous works are taken to show the results obtained by the GIFWPD-only based method and by combining the CEDA with the GIFWPD method.

EXPLORATION OF SUBSTITUTION OF REPEATED MODE SUBSPACES FOR CLOSELY SPACED MODE SUBSPACES

A new quantitative concept is introduced in this paper, which may be used to facilitate the measurement of the controllability of a subspace similar to subspace controllability degree. Then the concrete form of the subspace controllability degree of a flexible structure is derived, and the errors of subspace controllability degree and dynamical response caused by the substitution of a repeated mode subspace for a closely spaced mode subspace are discussed. All the results show that this substitution is rational under some conditions.

Observer-based control for the platform of a tethered space robot

This paper addresses the attitude control problem of a space tethered robot platform in the presence of unknown external disturbance caused by a connecting elastic tether. The tethergenerated unknown disturbance leads to tremendous challenges for attitude control of the platform.In this work, the perturbed attitude dynamics of the platform are derived with a consideration of the libration of the elastic tether, and then with the purpose of compensating the unknown disturbance, major attention is dedicated to develop a nonlinear disturbance observer based on gyros measurements, after which, an adaptive attitude scheme is proposed by combining the disturbance observer with a sliding mode controller. Finally, benefits from the observer based on an adaptive controller are validated by series of numerical simulations.

Printable microlaser arrays with programmable modes for information encryption

Lasing emissions with multiple and tunable modes are promising in coding field as a novel cryptographic primitive.With the advantages of simple fabrication,full-color and high-quality-factor whispering gallery mode lasing inside a circular cross-section,polymer microfibers are attractive for photonic devices.However,polymer lasing microfibers for information encryption have never been reported.Herein,we propose a design of printable lasing microfiber encryption chip by in-situ tuning the effective refractive index of the microresonator arrays via a facile approach.Through inkjet printing high-refractive-index nanoparticles on the designated position of lasing microfiber arrays,the effective refractive index of the microcavities is regulated,and the ratio of wavenumber spacing between transverse electric and transverse magnetic mode to the free spectral range can be modulated,particularly with neglectable influence by the size factor.Thus,the programmable region selective encoding process can be conducted simply by a printing program within several minutes.Besides,the encoded microfiber arrays are encapsulated into polydimethylsiloxane to reduce the scattering loss and environmental interference,and a printable encryption chip is realized.This work is expected to provide a platform for the printable encrypted devices.

Analysis of erbium doped holey fiber using fundamental space filling mode

Erbium-doped holey fiber with hexagonal lattice was modeled by using effective index method. In order to calculate the equivalent step index of the periodic structure of the cladding holey optical fiber, all-vectorial fundamental space filling mode approach was utilized. By using EHll mode, we have numerically solved the rate equations of a three-level pumping scheme for a fiber laser. The obtained results have shown a good agreement with the other experimental results, recently. The results have predicted amplifiers with gain efficiencies as high as 10 dB/mW.

Experimental investigation of limit space charge accumulation mode operation in a semi-insulating GaAs photoconductive semiconductor switch

Experiments with the limited space-charge accumulation（LSA） mode of oscillation in a large gap semiinsulating （SI） GaAs photoconductive semiconductor switch（PCSS） are discussed.It has been observed that growth and drift of a photo-activated charge domain（PACD） are quenched only when the bias voltage is more than twice the threshold voltage.The original negative resistance characteristics are directly utilized in the LSA mode;during LSA operation the spatial average of the electric field varies over a large portion of the negative differential mobility region of the velocity-electric field characteristic.The work efficiency of an SI GaAs PCSS is remarkably enhanced by electric field excursions into the positive resistance region when the total electric field is only below the threshold part of the time.The LSA mode can only operate in the certain conditions that satisfy the quenching of the accumulation layer and the smaller initial domain voltage.