Rate-embedded differential space-time-frequency coding scheme

In multiple-input-multiple-output orthogonal-frequency-division-multiplexing （MIMO-OFDM） system, a rate-embedded differential space-time-frequency （DSTF） coding scheme was proposed. Both the conventional space-time codes and coding techniques in frequency domain were employed to build high rate and low rate space-time-frequency message matrices. Then both types of message matrices were differentially transmitted alternately in the frequency domain. Consequently, the total transmission rate could be improved greatly. At receiver, a simple decision feedback differential detector （SDF-DD） was adopted to further enhance the total error performance with approximate DD complexity. Simulation results verified that the proposed scheme can implement high rate and high reliability differential transmission. Compared with the conventional DSTF coding schemes, the proposed scheme achieves higher spectral efficiency and much better error performance.

Decoding topological XYZ^(2) codes with reinforcement learning based on attention mechanisms

Quantum error correction, a technique that relies on the principle of redundancy to encode logical information into additional qubits to better protect the system from noise, is necessary to design a viable quantum computer. For this new topological stabilizer code-XYZ^(2) code defined on the cellular lattice, it is implemented on a hexagonal lattice of qubits and it encodes the logical qubits with the help of stabilizer measurements of weight six and weight two. However topological stabilizer codes in cellular lattice quantum systems suffer from the detrimental effects of noise due to interaction with the environment. Several decoding approaches have been proposed to address this problem. Here, we propose the use of a state-attention based reinforcement learning decoder to decode XYZ^(2) codes, which enables the decoder to more accurately focus on the information related to the current decoding position, and the error correction accuracy of our reinforcement learning decoder model under the optimisation conditions can reach 83.27% under the depolarizing noise model, and we have measured thresholds of 0.18856 and 0.19043 for XYZ^(2) codes at code spacing of 3–7 and 7–11, respectively. our study provides directions and ideas for applications of decoding schemes combining reinforcement learning attention mechanisms to other topological quantum error-correcting codes.

Recurrent neural network decoding of rotated surface codes based on distributed strategy

Quantum error correction is a crucial technology for realizing quantum computers.These computers achieve faulttolerant quantum computing by detecting and correcting errors using decoding algorithms.Quantum error correction using neural network-based machine learning methods is a promising approach that is adapted to physical systems without the need to build noise models.In this paper,we use a distributed decoding strategy,which effectively alleviates the problem of exponential growth of the training set required for neural networks as the code distance of quantum error-correcting codes increases.Our decoding algorithm is based on renormalization group decoding and recurrent neural network decoder.The recurrent neural network is trained through the ResNet architecture to improve its decoding accuracy.Then we test the decoding performance of our distributed strategy decoder,recurrent neural network decoder,and the classic minimum weight perfect matching(MWPM)decoder for rotated surface codes with different code distances under the circuit noise model,the thresholds of these three decoders are about 0.0052,0.0051,and 0.0049,respectively.Our results demonstrate that the distributed strategy decoder outperforms the other two decoders,achieving approximately a 5%improvement in decoding efficiency compared to the MWPM decoder and approximately a 2%improvement compared to the recurrent neural network decoder.

Improved Segmented Belief Propagation List Decoding for Polar Codes with Bit-Flipping

Belief propagation list(BPL) decoding for polar codes has attracted more attention due to its inherent parallel nature. However, a large gap still exists with CRC-aided SCL(CA-SCL) decoding.In this work, an improved segmented belief propagation list decoding based on bit flipping(SBPL-BF) is proposed. On the one hand, the proposed algorithm makes use of the cooperative characteristic in BPL decoding such that the codeword is decoded in different BP decoders. Based on this characteristic, the unreliable bits for flipping could be split into multiple subblocks and could be flipped in different decoders simultaneously. On the other hand, a more flexible and effective processing strategy for the priori information of the unfrozen bits that do not need to be flipped is designed to improve the decoding convergence. In addition, this is the first proposal in BPL decoding which jointly optimizes the bit flipping of the information bits and the code bits. In particular, for bit flipping of the code bits, a H-matrix aided bit-flipping algorithm is designed to enhance the accuracy in identifying erroneous code bits. The simulation results show that the proposed algorithm significantly improves the errorcorrection performance of BPL decoding for medium and long codes. It is more than 0.25 d B better than the state-of-the-art BPL decoding at a block error rate(BLER) of 10^(-5), and outperforms CA-SCL decoding in the low signal-to-noise(SNR) region for(1024, 0.5)polar codes.

Deep Learning Aided SCL Decoding of Polar Codes with Shifted-Pruning

Recently,a generalized successive cancellation list(SCL)decoder implemented with shiftedpruning(SP)scheme,namely the SCL-SP-ωdecoder,is presented for polar codes,which is able to shift the pruning window at mostωtimes during each SCL re-decoding attempt to prevent the correct path from being eliminated.The candidate positions for applying the SP scheme are selected by a shifting metric based on the probability that the elimination occurs.However,the number of exponential/logarithm operations involved in the SCL-SP-ωdecoder grows linearly with the number of information bits and list size,which leads to high computational complexity.In this paper,we present a detailed analysis of the SCL-SP-ωdecoder in terms of the decoding performance and complexity,which unveils that the choice of the shifting metric is essential for improving the decoding performance and reducing the re-decoding attempts simultaneously.Then,we introduce a simplified metric derived from the path metric(PM)domain,and a custom-tailored deep learning(DL)network is further designed to enhance the efficiency of the proposed simplified metric.The proposed metrics are both free of transcendental functions and hence,are more hardware-friendly than the existing metrics.Simulation results show that the proposed DL-aided metric provides the best error correction performance as comparison with the state of the art.

Distributed space-time-frequency coding for cooperative OFDM systems

A distributed space-time-frequency （STF） coding scheme is proposed for cooperative OFDM （C-OFDM） systems with three terminals over quasi-static frequency-selective Rayleigh fading channels, The outage probability is derived and its tight closed-form lower bound is presented. Asymptotic analysis indicates that the proposed scheme can achieve both spatial and multipath （frequency） diversity. The theoretical analysis of the proposed STF coded scheme is further implemented by the distributed group STF block coding （D-GSTFBC） scheme based on the subcarrier grouping technique, Simulation results confirm the previously introduced theoretical analysis.

Efficient unequal error protection for online fountain codes

In this paper,an efficient unequal error protection(UEP)scheme for online fountain codes is proposed.In the buildup phase,the traversing-selection strategy is proposed to select the most important symbols(MIS).Then,in the completion phase,the weighted-selection strategy is applied to provide low overhead.The performance of the proposed scheme is analyzed and compared with the existing UEP online fountain scheme.Simulation results show that in terms of MIS and the least important symbols(LIS),when the bit error ratio is 10-4,the proposed scheme can achieve 85%and 31.58%overhead reduction,respectively.

Design of Protograph LDPC-Coded MIMO-VLC Systems with Generalized Spatial Modulation

This paper investigates the bit-interleaved coded generalized spatial modulation(BICGSM) with iterative decoding(BICGSM-ID) for multiple-input multiple-output(MIMO) visible light communications(VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain(SiD) symbols and the spatial-domain(SpD) light emitting diode(LED)-index patterns are coded by a protograph low-density parity-check(P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating(SSER) method for constructing a type of novel generalized spatial modulation(GSM) constellations, referred to as SSERGSM constellations, so as to boost the performance of the BICGSM-ID MIMO-VLC systems.Moreover, by applying a modified PEXIT(MPEXIT) algorithm, we further design a family of rate-compatible P-LDPC codes, referred to as enhanced accumulate-repeat-accumulate(EARA) codes,which possess both excellent decoding thresholds and linear-minimum-distance-growth property. Both analysis and simulation results illustrate that the proposed SSERGSM constellations and P-LDPC codes can remarkably improve the convergence and decoding performance of MIMO-VLC systems. Therefore, the proposed P-LDPC-coded SSERGSM-mapped BICGSMID configuration is envisioned as a promising transmission solution to satisfy the high-throughput requirement of MIMO-VLC applications.

Belief Propagation List Decoding for Polar Codes:Performance Analysis and Software Implementation on GPU

Belief propagation(BP)decoding outputs soft information and can be naturally used in iterative receivers.BP list(BPL)decoding provides comparable error-correction performance to the successive cancellation list(SCL)decoding.In this paper,we firstly introduce an enhanced code construction scheme for BPL decoding to improve its errorcorrection capability.Then,a GPU-based BPL decoder with adoption of the new code construction is presented.Finally,the proposed BPL decoder is tested on NVIDIA RTX3070 and GTX1060.Experimental results show that the presented BPL decoder with early termination criterion achieves above 1 Gbps throughput on RTX3070 for the code(1024,512)with 32 lists under good channel conditions.

Efficient coding schemes with power allocation using space-time-frequency spreading

An efficient spaee-time-frequency （STF） coding strategy for multi-input multi-output orthogonal frequency division multiplexing （MIMO-OFDM） systems is presented for high bit rate data transmission over frequency selective fading channels. The proposed scheme is a new approach to space-time-frequency coded OFDM （ODFDM） that combines OFDM with space-time coding, linear precoding and adaptive power allocation to provide higher quality of transmission in terms of the bit error rate performance and power efficiency. In addition to exploiting the maximux diversity gain in frequency, time and space, the proposed scheme enjoys high coding advantages and low-complexity decoding. The significant performance improvement of our design is confirned by corroborating numerical simulations.

Physical Layer Encryption of OFDM-PON Based on Quantum Noise Stream Cipher with Polar Code

Orthogonal frequency division multiplexing passive optical network(OFDM-PON) has superior anti-dispersion property to operate in the C-band of fiber for increased optical power budget. However,the downlink broadcast exposes the physical layer vulnerable to the threat of illegal eavesdropping. Quantum noise stream cipher(QNSC) is a classic physical layer encryption method and well compatible with the OFDM-PON. Meanwhile, it is indispensable to exploit forward error correction(FEC) to control errors in data transmission. However, when QNSC and FEC are jointly coded, the redundant information becomes heavier and thus the code rate of the transmitted signal will be largely reduced. In this work, we propose a physical layer encryption scheme based on polar-code-assisted QNSC. In order to improve the code rate and security of the transmitted signal, we exploit chaotic sequences to yield the redundant bits and utilize the redundant information of the polar code to generate the higher-order encrypted signal in the QNSC scheme with the operation of the interleaver.We experimentally demonstrate the encrypted 16/64-QAM, 16/256-QAM, 16/1024-QAM, 16/4096-QAM QNSC signals transmitted over 30-km standard single mode fiber. For the transmitted 16/4096-QAM QNSC signal, compared with the conventional QNSC method, the proposed method increases the code rate from 0.1 to 0.32 with enhanced security.

The Confidentiality of Coding Video Games with Cheat Code and Bots for Cheating in a Virtual World

Video games have been around for several decades and have had many advancements from the original start of video games. Video games started as virtual games that were advertised towards children, and these virtual games created a virtual reality of a variety of genres. These genres included sports games, such as tennis, football, baseball, war games, fantasy, puzzles, etc. The start of these games was derived from a sports genre and now has a popularity in multiplayer-online-shooting games. The purpose of this paper is to investigate different types of tools available for cheating in virtual world making players have undue advantage over other players in a competition. With the advancement in technology, these video games have become more expanded in the development aspects of gaming. Video game developers have created long lines of codes to create a new look of video games. As video games have progressed, the coding, bugs, bots, and errors of video games have changed throughout the years. The coding of video games has branched out from the original video games, which have given many benefits to this virtual world, while simultaneously creating more problems such as bots. Analysis of tools available for cheating in a game has disadvantaged normal gamer in a fair contest.

List-Serial Pipelined Hardware Architecture for SCL Decoding of Polar Codes

For polar codes,the performance of successive cancellation list(SCL)decoding is capable of approaching that of maximum likelihood decoding.However,the existing hardware architectures for the SCL decoding suffer from high hardware complexity due to calculating L decoding paths simultaneously,which are unfriendly to the devices with limited logical resources,such as field programmable gate arrays(FPGAs).In this paper,we propose a list-serial pipelined hardware architecture with low complexity for the SCL decoding,where the serial calculation and the pipelined operation are elegantly combined to strike a balance between the complexity and the latency.Moreover,we employ only one successive cancellation(SC)decoder core without L×L crossbars,and reduce the number of inputs of the metric sorter from 2L to L+2.Finally,the FPGA implementations show that the hardware resource consumption is significantly reduced with negligible decoding performance loss.

适用2000 HSC CODE的高速船特点及总体设计要求

高速船由于其航速高、质量轻、营运特殊等特点,需要适用的规则与常规船型不同。2000年的《国际高速船安全规则》(简称2000 HSC CODE)作为较完备的适用于高速船的规则,被各海事主管机关广泛接受作为高速船的设计依据。文中简要介绍2000 HSC CODE的安全原理,以及该规则对各海事主管机关的适用程度;然后通过国内外高速船事故来分析该类船的事故类型及致因特点,并进一步介绍了适用高速船的风险控制及设计措施,包括营运限制、破舱稳性、防火要求和撤离分析等总体设计要求,以供理解高速船的安全原理并指导其设计。

CodeScore-R:用于评估代码合成功能准确性的自动化鲁棒指标

评估指标在代码合成领域中至关重要.常用的代码评估指标可以分为3种类型:基于匹配、基于语义和基于执行.其中,基于执行的Pass@k指标通过执行测试用例,能够准确判断预测代码的功能准确性.然而,该指标的计算需要大量开销,因此亟需设计一种自动化评估指标,在无需测试用例时仍可评估预测代码的功能准确性.此外,好的评估指标应当具有鲁棒性,即预测代码发生微小改变时,评估指标仍能保持其准确性.为此,提出了一种基于UniXcoder和对比学习的自动化鲁棒指标CodeScore-R,用于评估代码合成的功能准确性. CodeScore-R采用草图化处理、语法等价转换和变异测试等技术手段,有效减轻了标识符、语法结构和运算符对评估结果的干扰.实验结果表明,在Java和Python语言上的代码生成和迁移任务中,CodeScore-R的表现优于其他无需测试用例的评估指标,且更接近Pass@k指标,并具有更强的鲁棒性.

Improved Belief Propagation Decoder for LDPC-CRC-Polar Codes with Bit-Freezing

Though belief propagation bit-flip(BPBF)decoding improves the error correction performance of polar codes,it uses the exhaustive flips method to achieve the error correction performance of CA-SCL decoding,thus resulting in high decoding complexity and latency.To alleviate this issue,we incorporate the LDPC-CRC-Polar coding scheme with BPBF and propose an improved belief propagation decoder for LDPC-CRC-Polar codes with bit-freezing(LDPCCRC-Polar codes BPBFz).The proposed LDPCCRC-Polar codes BPBFz employs the LDPC code to ensure the reliability of the flipping set,i.e.,critical set(CS),and dynamically update it.The modified CS is further utilized for the identification of error-prone bits.The proposed LDPC-CRC-Polar codes BPBFz obtains remarkable error correction performance and is comparable to that of the CA-SCL(L=16)decoder under medium-to-high signal-to-noise ratio(SNR)regions.It gains up to 1.2dB and 0.9dB at a fixed BLER=10-4compared with BP and BPBF(CS-1),respectively.In addition,the proposed LDPC-CRC-Polar codes BPBFz has lower decoding latency compared with CA-SCL and BPBF,i.e.,it is 15 times faster than CA-SCL(L=16)at high SNR regions.

Doped low-density parity-check codes

In this paper,we propose a doping approach to lower the error floor of Low-Density Parity-Check(LDPC)codes.The doping component is a short block code in which the information bits are selected from the coded bits of the dominant trapping sets of the LDPC code.Accordingly,an algorithm for selecting the information bits of the short code is proposed,and a specific two-stage decoding algorithm is presented.Simulation results demonstrate that the proposed doped LDPC code achieves up to 2.0 dB gain compared with the original LDPC code at a frame error rate of 10^(-6)Furthermore,the proposed design can lower the error floor of original LDPC Codes.

A GAN-EfficientNet-Based Traceability Method for Malicious Code Variant Families

Due to the diversity and unpredictability of changes in malicious code,studying the traceability of variant families remains challenging.In this paper,we propose a GAN-EfficientNetV2-based method for tracing families of malicious code variants.This method leverages the similarity in layouts and textures between images of malicious code variants from the same source and their original family of malicious code images.The method includes a lightweight classifier and a simulator.The classifier utilizes the enhanced EfficientNetV2 to categorize malicious code images and can be easily deployed on mobile,embedded,and other devices.The simulator utilizes an enhanced generative adversarial network to simulate different variants of malicious code and generates datasets to validate the model’s performance.This process helps identify model vulnerabilities and security risks,facilitating model enhancement and development.The classifier achieves 98.61%and 97.59%accuracy on the MMCC dataset and Malevis dataset,respectively.The simulator’s generated image of malicious code variants has an FID value of 155.44 and an IS value of 1.72±0.42.The classifier’s accuracy for tracing the family of malicious code variants is as high as 90.29%,surpassing that of mainstream neural network models.This meets the current demand for high generalization and anti-obfuscation abilities in malicious code classification models due to the rapid evolution of malicious code.

Space-Time-Frequency Coded for Multiband-OFDM Based on IEEE 802.15.3a WPAN

In this paper, Multiband-OFDM UWB system based on IEEE 802.15.3a standard is studied and simulated with spatial, time and frequency (STF)coding scheme. The using of STF coding method can guarantee both full symbol rate and full diversity advantages. The simulation results show that the STF code uses multi- path-rich and random-clustering characteristics of UWB channel environment on the performance of MB- OFDM system.

Focus control of wide-angle metalens based on digitally encoded metasurface

Based on the principle of super-symmetric lens with quadratic phase gradient transformation, combined with the principle of digital coding of metasurface, we propose a wide-angle coded metalens for focusing control in two-dimensional space. This metalens achieves focus shift in the x-direction by changing the oblique incidence angle of the incident wave,and focus control in the y-direction by combining with the convolution principle of the digitally coded metasurface to achieve flexible control of light focusing in the two-dimensional plane. The metasurface unit is mainly composed of threelayer of metal structure and two layers of medium, and the transmission phase is obtained by changing the middle layer of metal structure, which in turn obtains the required phase distribution of the metalens. The design of the metalens realizes the function of the lens with a large viewing angle at the x-polarized incidence, and realizes two-dimensional focus control. Experimentally, we prepared the designed coding metalens and tested the focus control function of the wide-angle coding metalens. The experimental results are in good agreement with the design results.