Optimization Design of an Embedded Multi-Cell Thin-Walled Energy Absorption Structures with Local Surface Nanocrystallization

Bymeans of the local surface nanocrystallization that enables to change the material on local positions,an innovative embedded multi-cell(EMC)thin-walled energy absorption structures with local surface nanocrystallization is proposed in this paper.The local surface nanacrystallization stripes are regarded as the moving morphable components in the domain for optimal design.Results reveal that after optimizing the local surface nanocrystallization layout,the specific energy absorption(SEA)is increased by 50.78%compared with the untreated counterpart.Besides,in contrast with the optimized 4-cell structure,the SEA of the nanocrystallized embedded 9-cell structure is further enhanced by 27.68%,in contrast with the 9-cell structure,the SEA of the nanocrystallized embedded clapboard type 9-cell structure is enhanced by 3.61%.Thismethod provides a guidance for the design of newenergy absorption devices.

Design and 3D Printing of Graded Bionic Metamaterial Inspired by Pomelo Peel for High Energy Absorption

Light-weight,high-strength metamaterials with excellent specific energy absorption(SEA)capabilities are sig-nificant for aerospace and automobile.The SEA of metamaterials largely depends on the material and structural design.Herein,inspired by the superior impact resistance of pomelo peel for protecting the pulp and the elevated SEA ability of a functionally graded structure,a graded bionic polyhedron metamaterial(GBPM)was designed and realized by 3D printing using a soft material(photosensitive resin)and a hard material(Ti-6Al-4V).Guided by compression tests and numerical simulations,the elevated SEA ability was independent of the materials.The fluctuation region appeared in hard-material-fabricated bionic polyhedron metamaterial(BPMs)and was absent in soft-material-fabricated BPMs in the stress-strain curves,resulting in the growth rate of the SEA value of the soft-material-fabricated GBPM being enhanced by 5.9 times compared with that of the hard-material-fabricated GBPM.The SEA values of soft-and hard-material-fabricated GBPM were 1.89 and 44.16 J/g,which exceed those of most soft-and hard-material-fabricated metamaterials reported in previous studies.These findings can guide the design of metamaterials with high energy absorption to resist external impacts.

An Optimal Design of the Two-Staged Square Sectional Combined Energy Absorption Structure with Local Surface Nanocrystallization

In this paper,a local surface nanocrystallization technology is used for thin-walled structures with square cross sections,and an energy absorption device of two-staged combined energy absorption structure is proposed.In virtue of the surface nanocrystallization that enables to change the material on local positions,the structural deformation is induced and controlled to maximize the energy absorption capacity.A numerical model of the two-staged combined energy absorption structure is established,and the local surface nanocrystallization layout is optimized.The results show that the specific energy absorption of two-staged combined structure with local surface nanocrystallization can be increased by 34.36%compared with the untreated counterpart of the same material and structural shape.The ratio between the first and second peak crushing forces and the energy absorption allocation ratio between the two stages can be adjusted in the ranges of 0.26–0.55 and 0.31–0.45,respectively,which can be controlled by the local surface nanocrystallization designs.The numerical simulation and experimental results are in good agreement,which shows that the design for energy absorption device with local surface nanocrystallization is feasible and effective.

Ballistic Penetration Damage of Hybrid Thermoplastic Composites Reinforced with Kevlar and UHMWPE Fabrics

Polymer matrix types of fiber hybrid composites are key factors to improve ballistic impact damage tolerances.Here we report ballistic penetration damages of Kevlar/ultra-high molecular weight polyethylene(UHMWPE)hybrid composites with thermoplastic polyurethane(PU)matrix.The hybrid composites were penetrated by fragment-simulating projectiles(FSPs)using an air gun impact system.The effects of stacking sequences on the ballistic performance of hybrid composites were analyzed.Two types of specific energy absorption(the energy absorption per unit area density and the energy absorption per unit thickness)were investigated.It was found that the main damage modes of PU hybrid composites were fiber breakage,matrix damage,fiber pullout and interlayer delamination.The instantaneous deformation could not be used as a reference index for evaluating the ballistic performance of the target plate.The energy absorption process of the PU hybrid composites showed a nonlinear pattern.The hybrid structure affected the specific energy absorption of the materials.

Study of Impact Resistance Based on Porcupine Quills Bionic Thin-walled Structure

Using an electron microscope to observe the microstructure of a porcupine quills cross-section and a bionic method,a new bionic structure was proposed.The performance of the structure in terms of energy absorption,maximum impact force withstood,and impact force efficiency was evaluated using Ansys finite element simulation software to simulate the structure's impact.To examine the impact of ribs on the structural performance of the bionic porcupine quills,a control structure was developed.According to the results of the finite element simulation,the presence of ribs in the Bionic porcupine quills structure can transfer stress uniformly to the overall structure and share stress for some of the rupture-prone regions.Ribs reduce stress concentration in specific areas and increase the impact force efficiency of the structure.The SEA and IFE values of bionic porcupine quills were 30.01 kJ/kg and 84.22%,respectively.The structure is then optimized for parameter design in order to find the optimal structure by response surface in order to improve the structure's SEA and decrease its MIF.In order to evaluate the precision of the response surface,the optimal structure predicted is validated using finite element simulation.