THERMAL ANALYSIS OF FRICTIONAL DISK IN SPEEDING WET CLUTCH

Multi-frictional disks are employed to transmit the torque in speeding wetclutch, and the oil thickness within frictional disks could be adjusted for practical outputspeeding. As oil combined with alpha-hydrocarbon or polyester is getting widely used as lubricantand the speeding wet clutch works within hydrodynamic lubrication, mixture lubrication, boundarylubrication and contact situation, established the thermal analysis model for investigating thebehavior of frictional disks in speeding wet clutch, which covers the power-law fluid model,Patir-Cheng average flow model, GT asperity contact model, oil film inertia and heat effects, meanenergy equation, and heat conduction equation. The formulas in the model are deduced. The numeralcalculation and analysis for hydrodynamic lubrication and mixture lubrication are executed.Relationships and variations among transmitting torque, mean push pressure, output speed, and loadare presented. Thermal effect should be considered during the hydrodynamic lubrication and largertransmitting torque makes earlier entrance to mixture lubrication.

Speeding up the Internationalization of Raw Silk Standard

China is the main silk producer in the world, whose RSS (Raw Silk Standard)is widely approved in international trade. After entering WTO, China needs to revise the RSSaccording to the changes of silk industry and develop advanced electronic testing system and improvetesting means, so as to promote the internationlization of the RSS. 1. The international standingof Chinese silk The silk consisting of 18 amino acids has the similar protein structure to people'sskin. It is enjoyed by most people for it' s comfortable, magnificent and noble features and ispraised to be the second skin for its unique effects on health and adjusting the body water. In the21st century, silk is the main international fashion as the representative of green products.

Xi'an Aviation Engine Co.——Speeding up the Pace of Technical Renovation, Raising the Capacity of Subcontracting and Export Earnings

In recent years, the subcontracting production for foreign trade of the Xi’an Aviation Engine Company (XAEC), a foreign trade production base of China, has achieved rapid development. In 1994, the company’s export earnings from foreign trade made a breakthrough at US$11 million, and it was commended by the State Economic

Speeding Up Tianjin's Municipal Highway Construction By Making Full Use of Foreign Capital

To introduce foreign capital for the municipal highway construction is a great measure to meet the development of the socialist market economy and to reform the investment system for the municipal highway construction. The aim of the reform lies in taking the construction and management of the municipal highway facilities as an industry to operate, widening the investment channel of the municipal highway construction and gradually forming a benign cycle of investment-construc-

Speeding Up the Transformation of the Operational Mechanism And Further Developing the International Market

According to customs statistics, China’s exports of machinery and electric products in 1996 were worth US$ 48.21 billion, an increase of 9.9 percent over the preceding year, and 8.4 percent higher than the growth rate of the nation’s total exports. The proportion of machinery and electric product exports in the nation’s total foreign trade volume\ increased from 29.5 percent in 1995 to 31.9 percent in 1996, a growth at 2.4 percent.

SPEEDING UP HOUSING CONSTRUCTION

Housing isone of the necessities of humansfor existence and development.The Chinese government hasalways attached great importanceto housing construction;especially in recent years,thepriority development of housingconstruction has been seen inthe real estate and propertiesindustry.Hou Jie,Minister ofConstruction,not long ago wrotean article summarizing theachievements made in this sectorand drawing a blueprint forspeedup of housing constructionand the improvement of livingconditions in the future.It willprovide a vast vista for thedevelopment of China’s buildingindustry and its internationalcooperation.

Exploration in Tarim Basin Speeding up

ＥｘｐｌｏｒａｔｉｏｎｉｎＴａｒｉｍＢａｓｉｎＳｐｅｅｄｉｎｇｕｐＡｃｃｏｒｄｉｎｇｔｏｔｈｅｐｌａｎｍａｄｅｂｙｔｈｅＴａｒｉｍＰｅｔｒｏｌｅｕｍＥｘｐｌｏｒａｔｉｏｎａｎｄＤｅｖｅｌｏｐｍｅｎｔＢｕｒｅａｕｏｎＯｃｔｏｂｅｒ３１，１９９５，ｅｉｇ...

SPEEDING UP THE CONSTRUCTION OF HIGH-SPEED RAILWAYS IN CHINA

High-speed railways have the merits of high speed, high transport capacity, low consumption of energy, less pollution, less occupation of land, and greater safety. The development of high-speed railways is suitable for the national conditions in China.The authors suggest that, with the Hu-Ning (Shanghai-Nanjing) section of the Jing-Hu (Beijing-Shanghai) Railway as the starting point, a high-speed dedicated passenger railway line be built to realize the separate transportation of passengers and goods, thus easing the strain on transport in East China, accumulating experience for the future development of high-speed railways, and bringing along the development of high and new technology industries.

Speeding up the Development of Space Industry to Meet the New Challenge

This paper discusses the urgency to further develop China’s space technological industry;analyzes the gaps between China and other advanced countries in space industry,including technological level,development scale,application scope and investment;describes the current severe situation that the China’s space industry is faced with and proposes the overall objective,guiding principles and major tasks of China’s space technological sector in the Ninth-Five Year Plan and the coming decade.Finally,it proposes some policies and effective measures to speed up the development of China’s space industry to meet the challenge in the 21st century.

Influence of work zone signage on driver speeding behavior

Speeding in a work zone needs to be tackled effectively to enhance work zone safety. This study evaluates the influence of three different work zone signs—speed photo enforced signs, dynamic speed display signs and reduced speed limit signs—on driver speeding behavior using a medium-fidelity driving simulator. The speed photo enforced and reduced speed limit signs were placed at intervals before the start of the work zone and in the work zone. A virtual work zone network was built to replicate the Baltimore–Washington Parkway(MD-295). A total of 66 participants from different socioeconomic backgrounds participated in 264 driving simulation sessions. The speeds were measured over four phases: initial speed area, sign visible area, sign readable area and post sign area. An analysis of variance and post hoc analysis showed that the speed photo enforced sign was the most effective of the three signs. The second speed photo enforced sign within the work zone was more effective at reducing speed than the sign before the start of the work zone, especially in the post sign area. It was observed that female participants tend to slow down more when encountering a speed photo enforcement sign.

Exploring speeding behavior using naturalistic car driving data from smartphones

The present research aimed to identify critical factors that affect speeding behavior.For that purpose,high-resolution smartphone data collected from a naturalistic driving experiment of 88 drivers were utilized,augmented with data from self-reported questionnaires.Using risk exposure and driving behavior indicators calculated from smartphone sensor data,as well as demographic characteristics and self-reported driving performance,statistical analysis was carried out for modelling the percentage of driving time over the speed limit,namely by means of generalized linear mixed-effects models.More precisely,an overall model was developed for all road environments,and additional separate models were developed for driving on urban and rural roads.The results from the interpretation of the estimated parameters of the models can be summarized as follows:the parameters of trip distance and mobile phone use while driving have been determined as statistically significant and positively correlated with the percentage of speeding time during a driver's trip.In the same context,male drivers and drivers in the age group of18-34 also increase the percentages of speeding instances while driving.Regarding driving behavior as stated on the questionnaire,it seems that low frequencies of self-declared speeding(never or rarely)are statistically significant and negatively correlated with the percentage of speeding time.It is expected that this research can provide considerable gains to society,since the stakeholders including policy makers and industry could rely on the results and recommendations regarding risk factors that appear to be critical for safe driving.

Energy harvesting and speed sensing with a hybrid rotary generator for self-powered wireless monitoring

Real-time onboard health monitoring systems are critical for the railway industry to maintain high service quality and operational safety.However,the issue with power supplies for monitoring sensors persists,especially for freight trains that lack onboard power.Here,we propose a hybrid piezoelectric-triboelectric rotary generator(HPT-RG)for energy harvesting and vehicle speed sensing.The HPT-RG incorporates a rotational self-adaptive technique that softens the equivalent stiffness,enabling the piezoelectric non-resonant beam to surpass resonance limitations in a low-frequency region.The experiments demonstrate the feasibility of using the HPT-RG as an energy harvesting module to collect the rotational energy of the freight rail transport and power the wireless temperature sensors.To allow multiple monitoring in confined spaces on trains,a triboelectric sensing module is added to the HPT-RG to sense the operation speed and mileage of vehicles.Furthermore,the generator exhibits favorable mechanical durability under more than 600 h of official testing on the train bogie axle.The proposed HPT-RG is essential for creating a truly self-powered,maintenance-free,and zero-carbon onboard wireless monitoring system on freight railways.

Effect of speed humps on instantaneous traffic emissions in a microscopic model with limited deceleration capacity

As a common transportation facility, speed humps can control the speed of vehicles on special road sections to reduce traffic risks. At the same time, they also cause instantaneous traffic emissions. Based on the classic instantaneous traffic emission model and the limited deceleration capacity microscopic traffic flow model with slow-to-start rules, this paper has investigated the impact of speed humps on traffic flow and the instantaneous emissions of vehicle pollutants in a single lane situation. The numerical simulation results have shown that speed humps have significant effects on traffic flow and traffic emissions. In a free-flow region, the increase of speed humps leads to the continuous rise of CO_(2), NO_(X) and PM emissions. Within some density ranges, one finds that these pollutant emissions can evolve into some higher values under some random seeds. Under other random seeds, they can evolve into some lower values. In a wide moving jam region, the emission values of these pollutants sometimes appear as continuous or intermittent phenomenon. Compared to the refined Na Sch model, the present model has lower instantaneous emissions such as CO_(2), NO_(X) and PM and higher volatile organic components(VOC) emissions. Compared to the limited deceleration capacity model without slow-to-start rules, the present model also has lower instantaneous emissions such as CO_(2), NO_(X) and PM and higher VOC emissions in a wide moving jam region. These results can also be confirmed or explained by the statistical values of vehicle velocity and acceleration.

Attack-Resilient Distributed Cooperative Control of Virtually Coupled High-Speed Trains via Topology Reconfiguration

Dear Editor,This letter addresses the resilient distributed cooperative control problem of a virtually coupled train convoy under stochastic disturbances and cyber attacks.The main purpose is to achieve distributed coordination of virtually coupled high-speed trains with the prescribed inter-train distance and same cruise velocity.

A Time-Domain Numerical Simulation for Free Motion Responses of Two Ships Advancing in Head Waves

The constant panel method within the framework of potential flow theory in the time domain is developed for solving the hydrodynamic interactions between two parallel ships with forward speed.When solving problems within a time domain framework,the free water surface needs to simultaneously satisfy both the kinematic and dynamic boundary conditions of the free water surface.This provides conditions for adding artificial damping layers.Using the Runge−Kutta method to solve equations related to time.An upwind differential scheme is used in the present method to deal with the convection terms on the free surface to prevent waves upstream.Through the comparison with the available experimental data and other numerical methods,the present method is proved to have good mesh convergence,and satisfactory results can be obtained.The constant panel method is applied to calculate the hydrodynamic interaction responses of two parallel ships advancing in head waves.Numerical simulations are conducted on the effects of forward speed,different longitudinal and lateral distances on the motion response of two modified Wigley ships in head waves.Then further investigations are conducted on the effects of different ship types on the motion response.

Research on Cavitation Characteristics and Influencing Factors of Herringbone Gear Pump

Cavitation is a common issue in pumps,causing a decrease in pump head,a fall in volumetric efficiency,and an intensification of outlet flow pulsation.It is one of the main hazards that affect the regular operation of the pump.Research on pump cavitation mainly focuses on mixed flow pumps,jet pumps,external spur gear pumps,etc.However,there are few cavitation studies on external herringbone gear pumps.In addition,pumps with different working principles significantly differ in the flow and complexity of the internal flow field.Therefore,it is urgent to study the cavitation characteristics of external herringbone gear pumps.Compared with experimentalmethods,visual research and cavitation area identification are achieved through computation fluid dynamic(CFD),and changing the boundary conditions and shape of the gear rotor is easier.The simulation yields a head error of only 0.003%under different grid numbers,and the deviation between experimental and simulation results is less than 5%.The study revealed that cavitation causes flow pulsation at the outlet,and the cavitation serious area is mainly distributed in the meshing gap and meshing area.Cavitation can be inhibited by reducing the speed,increasing the inlet pressure,and changing the helix angle can be achieved.For example,when the inlet pressure is 5 bar,the maximumgas volume fraction in themeshing area is less than 50%.These results provide a reference for optimizing the design and finding the optimal design parameters to reduce or eliminate cavitation.

Effects of wind speed,underlying surface,and seed morphological traits on the secondary seed dispersal in the Tengger Desert,China

The maintenance of sand-fixing vegetation is important for the stability of artificial sand-fixing systems in which seed dispersal plays a key role.Based on field wind tunnel experiments using 11 common plant species on the southeastern edge of the Tengger Desert,China,we studied the secondary seed dispersal in the fixed and semi-fixed sand dunes as well as in the mobile dunes in order to understand the limitations of vegetation regeneration and the maintenance of its stability.Our results indicated that there were significant variations among the selected 11 plant species in the threshold of wind speed(TWS).The TWS of Caragana korshinskii was the highest among the 11 plant species,whereas that of Echinops gmelinii was the lowest.Seed morphological traits and underlying surface could generally explain the TWS.During the secondary seed dispersal processes,the proportions of seeds that did not disperse(no dispersal)and only dispersed over short distance(short-distance dispersal within the wind tunnel test section)were significantly higher than those of seeds that were buried(including lost seeds)and dispersed over long distance(long-distance dispersal beyond the wind tunnel test section).Compared with other habitats,the mobile dunes were the most difficult places for secondary seed dispersal.Buried seeds were the easiest to be found in the semi-fixed sand dunes,whereas fixed sand dunes were the best sites for seeds that dispersed over long distance.The results of linear mixed models showed that after controlling the dispersal distance,smaller and rounder seeds dispersed farther.Shape index and wind speed were the two significant influencing factors on the burial of seeds.The explanatory power of wind speed,underlying surface,and seed morphological traits on the seeds that did not disperse and dispersed over short distance was far greater than that on the seeds that were buried and dispersed over long distance,implying that the processes and mechanisms of burial and long-distance dispersal are more complex.In summary,most seeds in the study area either did not move,were buried,or dispersed over short distance,promoting local vegetation regeneration.

Characterization and Analysis of Inconel 718 Alloy Ground at Different Speeds

Inconel 718(IN718)alloy is widely applied to fabricate high temperature resistant or corrosion resistant parts due to its excellent mechanical performance.However,the machining of IN718 alloy is difficult as it may cause serious tool wear and poor surface quality(SQ)of the workpiece.In this work,grinding experiments on IN718 alloy at different speeds were conducted by using a CBN grinding wheel.The relationship between grinding speed,SQ and subsurface damage(SSD)was well studied.With increasing grinding speed,surface roughness decreased,and SQ was greatly improved.Meanwhile,the microhardness of the grinding surface declined as the grinding speed increased.The SSD depth was almost unchanged when the grinding speed was lower than 15 m/s,then it decreased with higher grinding speeds.It was attributed to the mechanical-thermal synergistic effect in the grinding process.The results indicated that increasing grinding speed can effectively improve the SQ and reduce the SSD of IN718 alloy.The conclusion in the work may also provide insight into processing other hard-to-machining materials.

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed slightly.The dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)increased.With the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical<2111>-<1123>rare-earth(RE)textures.The alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening contributions.These results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.