Unraveling the Fundamental Mechanism of Interface Conductive Network Influence on the Fast‑Charging Performance of SiO‑Based Anode for Lithium‑Ion Batteries

Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effectively addresses the aforementioned problems;however,the impact of its quality on lithium-ion transfer and structure durability is yet to be explored.Herein,the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time.2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier.Furthermore,atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network,which is critical to the linear reduction of electrode residual stress.This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance.

Reviewing and understanding the stability mechanism of halide perovskite solar cells

Finding sustainable and renewable energy to replace traditional fossil fuel is critical for reducing greenhouse gas emission and avoiding environment pollution.Solar cells that convert energy of sunlight into electricity offer a viable route for solving this issue.At present,halide perovskites are the most potential candidate materials for solar cell with considerable power conversion efficiency,whereas their stability remains a challenge.In this work,we summarize four different key factors that influence the stability of halide perovskites:(a)effect of environmental moisture on the degradation of halide perovskites.The performance of halide perovskite solar cells is reduced due to hydrated crystal hinders the diffusion of photo-generated carriers,which can be solved by materials encapsulation technique;(b)photoinduced instability.Through uncovering the underlying physical mechanism,we note that materials engineering or novel device structure can extend the working life of halide perovskites under continuous light exposure;(c)thermal stability.Halide perovskites are rapidly degraded into PbI2 and volatile substances as heating due to lower formation energy,whereas hybrid perovskite is little changed;(d)electric field effect in the degradation of halide perovskites.The electric field impacts significantly on the carrier separation,changes direction of photo-induced currents and generates switchable photovoltaic effect.For each key factor,we have shown in detail the underlying physical mechanisms and discussed the strategies to overcome this stability difficulty.We expect this review from both theoretical and experimental points of view can be beneficial for development of perovskite solar cell materials and promotes practical applications.

Stability Mechanism of Laser-induced Fluorinated Super-hydrophobic Coating in Alkaline Solution

Great attention has been focused on super-hydrophobic surfaces due to their fantastic applications.Fluoride chemicals are widely used to fabricate super-hydrophobic surfaces due to their convenience,simplicity,and high efficiency.Previous research has made extensively efforts on corrosion resistance of fluorinated super-hydrophobic surfaces in corrosive media.Nevertheless,rare papers focused on the underlying reasons of anticorrosion property and stability mechanism on the fluorinated super-hydrophobic coatings in alkaline solution.Therefore,this work aims to reveal these mechanisms of fluorinated super-hydrophobic copper samples in strong alkaline solution(pH 13).Through the characterization of surface wettability and surface morphology,the laser-induced super-hydrophobic surface retained excellent stability after soaking in alkaline solution for 4 h.Through measurement of chemical compositions,the anticorrosion mechanism and stability mechanism of the fluorinated super-hydrophobic surface were proposed.Importantly,the hydroxyl ion(OH−)can further promote the hydrolysis reaction to improve the density and bonding strength of the fluoride molecules.Finally,the electrochemical experiments(PDP and EIS tests)were conducted to validate the rationality of our proposed conclusions.

Lithium nitrate regulated carbonate electrolytes for practical Li-metal batteries: Mechanisms, principles and strategies

Li-metal batteries(LMBs)regain research prominence owing to the ever-increasing high-energy requirements.Commercially available carbonate electrolytes exhibit unfavourable parasitic reactions with Limetal anode(LMA),leading to the formation of unstable solid electrolyte interphase(SEI)and the breed of Li dendrites/dead Li.Significantly,lithium nitrate(LiNO_(3)),an excellent film-forming additive,proves crucial to construct a robust Li_(3)N/Li_(2)O/Li_(x)NO_(y)-rich SEI after combining with ether-based electrolytes.Thus,the given challenge leads to natural ideas which suggest the incorporation of LiNO_(3) into commercial carbonate for practical LMBs.Regrettably,LiNO_(3) demonstrates limited solubility(~800 ppm)in commercial carbonate electrolytes.Thence,developing stable SEI and dendrite-free LMA with the incorporation of LiNO_(3) into carbonate electrolytes is an efficacious strategy to realize robust LMBs via a scalable and cost-effective route.Therefore,this review unravels the grievances between LMA,LiNO_(3)and carbonate electrolytes,and enables a comprehensive analysis of LMA stabilizing mechanism with LiNO_(3),dissolution principle of LiNO_(3) in carbonate electrolytes,and LiNO_(3) introduction strategies.This review converges attention on a point that the LiNO_(3)-introduction into commercial carbonate electrolytes is an imperious choice to realize practical LMBs with commercial 4 V layered cathode.

Utilizing hybrid faradaic mechanism via catalytic and surface interactions for high-performance flexible energy storage system

Improving the capacitance and energy density is a significant challenge while developing practical and flexible energy storage system(ESS).Redox mediators(RMs),as redox-active electrolyte additives,can provide additional energy storing capability via electrochemical faradaic contribution on electrodes for high-performance flexible ESSs.Particularly,determining effective material combinations between electrodes and RMs is essential for maximizing surface faradaic redox reactions for energy-storage performance.In this study,an electrode-RM system comprising heterostructured hybrid(carbon fiber(CF)/MnO_(2)) faradaic electrodes and iodine RMs(I-RMs) in a redox-active electrolyte is investigated.The CF/MnO_(2)with the 1-RMs(CF/MnO_(2)-I) induces dominant catalytic faradaic interaction with the I-RMs,significantly enhancing the surface faradaic kinetics and increasing the overall energy-storage performance.The CF/MnO_(2)-I ESSs show a 12.6-fold(or higher) increased volumetric energy density of 793.81 mWh L^(-1)at a current of 10 μA relative to ESSs using CF/MnO_(2)without I-RMs(CF/MnO_(2)).Moreover,the CF/MnO_(2)-I retains 93.1% of its initial capacitance after 10,000 cycles,validating the excellent cyclability.Finally,the flexibility of the ESSs is tested at different bending angles(180° to 0°),demonstrating its feasibility for flexible and high-wear environments.Therefore,CF/MnO_(2)electrodes present a practical material combination for high-performance flexible energy-storage devices owing to the catalytic faradaic interaction with I-RMs.

Stabilization Mechanism of Calcium Lignosulphonate Used in Expansion Sensitive Soil

A series of tests were performed to investigate the macroscopic properties and the stabilization mechanism of calcium lignosulphonate modified expansive soil.Compared with natural soil,soil modified by 4%calcium lignosulphonate showed 56.5%increased 28 days unconfined compressive strength and 23.8%decreased free expansion rate.The X-ray diffraction analysis results indicate the existence of cation exchange and the reduction of montmorillonite interplanar spacing.The X-computed tomography results demonstrate that calcium lignosulphonate decreased the porosity and optimized the pore distribution.The calcium lignosulphonate also increased the stability of the suspension system according to the Zeta potential results.Moreover,the results of rheological tests show that the moderate amount of calcium lignosulphonate enhanced the yield stress and the plastic viscosity,proving the formation of a strong connection between soil particles.

Mechanism of progressive failure of a slope with a steep joint under the action of freezing and thawing:model test

The stability of slope rock masses is influenced by freeze-thaw cycles in cold region,and the mechanism of stability deterioration is not clear.In order to understand the damage and progressive failure characteristics of rock masses under the action of freezing and thawing,a model test was conducted on slope with steep joint in this study.The temperature,frost heaving pressure and deformation of slope rock mass were monitored in real-time during the test and the progressive failure mode was studied.The experimental results show that the temperature variations of cracking and the rock mass of a slope are different.There are obvious latent heat stages in the temperature-change plot in the crack,but not in the slope rock masses.The frost heaving effect in the fracture is closely related to the constraint conditions,which change with the deformation of the fracture.The frost heaving pressure fluctuates periodically during freezing and continues to decrease during thawing.The surface deformation of the rock mass increases during freezing,and the deformation is restored when it thaws.Freeze-thaw cycling results in residual deformation of the rock mass which cannot be fully restored.Analysis shows that the rock mass at the free side of the steep-dip joint rotates slightly under the frost heaving effect,causing fracture propagation.The fracture propagation pattern is a circular arc at the beginning,then extends to the possible sliding direction of the rock mass.Frost heaving force and fracture water pressure are the key factors for the failure of the slope,which can cause the crack to penetrate the rock mass,and a landslide ensues when the overall anti-sliding resistance of the rock mass is overcome.

Curing Kinetics, Mechanical Properties and Thermal Stability of Epoxy/Graphene Nanoplatelets(GNPs) Powder Coatings

Epoxy/graphene nanoplatelets（GNPs） powder coatings were fabricated using ultrasonic predispersion of GNPs and melt-blend extrusion method. The isothermal curing kinetics of epoxy/GNPs powder coating were monitored by means of real-time Fourier transform infrared spectroscopy（FT-IR） with a heating cell. The mechanical properties of the epoxy/GNPs cured coatings had been investigated, by evaluating their fracture surfaces with field-emission scanning electron microscopy（FE-SEM） after three-point-bending tests. The thermal stability of the epoxy/GNPs cured coatings was studied by thermo-gravimetric analysis（TGA）. The isothermal curing kinetics result showed that the GNPs would not affect the autocatalytic reaction mechanism, but the loading of GNPs below 1.0 wt % additive played a prompting role in the curing of the epoxy/GNPs powder coatings. The fracture strain, fracture toughness and impact resistance of the epoxy/GNPs cured coatings increased dramatically at low levels of GNPs loading（1 wt %）, indicating that the GNPs could improve the toughness of the epoxy/GNPs powder coatings. Furthermore, from FE-SEM studies of the fracture surfaces, the possible toughening mechanisms of the epoxy/GNPs cured coatings were proposed. TGA result showed that the incorporation of GNPs improved the thermal stability of the cured coatings. Hence, the GNPs modified epoxy can be an efficient approach to toughen epoxy powder coating along with improving their thermal stability.

Effects of the precipitation of stabilizers on the mechanism of grain fracturing in a zirconia metering nozzle

The mechanism of grain fracturing in a zirconia metering nozzle used in the continuous casting process was studied. The phase composition, microstructure, and chemical composition of the residual samples were studied using an X-ray fluorescence analyzer, scanning electron microscope, and electron probe. Results revealed that the composition, structure, and mineral phase of the original layer, transition layer, and affected layer of the metering nozzle differed because of stabilizer precipitation and steel slag permeation. The stabilizer MgO formed low-melting phases with steel slag and impure SiO2 on the boundaries（pores） of zirconia grains; consequently, grain fracturing occurred and accelerated damage to the metering nozzle was observed.

Preparation and stabilization mechanism of carbon dots nanofluids for drag reduction

During the development of low or ultra-low permeability oil resources,the alternative energy supply becomes a prominent issue.In recent years,carbon dots(CDs)have drawn much attention owing to their application potential in oil fields for reducing injection pressure and augmenting oil recovery.However,carbon dots characterized of small size,high surface energy are faced with several challenges,such as self-aggregation and settling.The preparation of stably dispersed carbon dots nanofluids is the key factor to guarantee its application performance in formation.In this work,we investigated the stability of hydrophilic carbon dots(HICDs)and hydrophobic carbon dots-Tween 80(HOCDs)nanofluids.The influences of carbon dots concentration,sorts and concentration of salt ions as well as temperature on the stability of CDs were studied.The results showed that HICDs are more sensitive to sort and concentration of salt ions,while HOCDs are more sensitive to temperature.In addition,the core flooding experiments demonstrated that the pressure reduction rate of HICDs and HOCDs nanofluids can be as high as 17.88%and 26.14%,respectively.Hence,the HICDs and HOCDs nanofluids show a good application potential in the reduction of injection pressure during the development of low and ultra-low permeability oil resources.

Mechanical and thermodynamical stability of BiVO4 polymorphs using first-principles study

First principles calculations of structural, electronic, mechanical, and thermodynamic properties of different poly- morphs of BiVO4 are performed using Bender-type plane/wave ultrasoft pseudopotentials within the generalized gradient approximation （GGA） in the flame of density functional theory （DFT）. The calculated structural and electronic properties are consistent with the previous theoretical and experimental results. The electronic structures reveal that m-BiVO4, op- BiVO4, and st-BiVO4 have indirect band gaps, on the other hand, zt-BiVO4 has a direct band gap. From the DOS and Mulliken＇s charge analysis, it is observed that only m-BiVO4 has 6s2 Bi lone pair. Bond population analysis indicates that st-BiVO4 shows a more ionic nature and a similar result is obtained from the elastic properties. From the elastic prop- erties, it is observed that st-BiVO4 is more mechanically stable than the others, st-BiVO4 is more ductile and useful for high electro-optical and electro-mechanical coupling devices. Our calculated thermodynamic properties confirm the similar characteristics found from electronic and elastic properties, m-BiVO4 is useful as photocatalysts, solid state electrolyte, and electrode and other polymorphs are applicable in electronic device fabrications.

Running Temperature and Mechanical Stability of Grease as Maintenance Parameters of Railway Bearings

Spherical roller bearings in railway car wheels are critical components whose failure may have catastrophic consequences. The present study aims to analyse the mechanical stability of greases and temperature of bearings as indicators for condition-based bearing maintenance. The performed case study includes nine fully-formulated commercial greases examined in the wheel bearings of five ore cars operated in northern Scandinavia. The studied ore cars travelled a distance of about 300 000 km during a period of three years. Small samples of the greases were taken on eight occasions to test their mechanical stability. In addition, the temperatures of the bearings were continuously recorded. After the test period, the wear, electrical damage, and corrosion of the bearings were examined. One of the findings is that the shear stress of the grease at a certain shear velocity （the certain yieldstress （CEY） value） is a good maintenance indicator and is highly dependent on the grease type. The bearing＇s wear, electrical damage and corrosion also depend on the grease type. However, no oxidation of the greases was identified. The paper also outlines a systematic methodology to determine an overall maintenance indicator for railway roller bearings which is based on the field measurements.

The role of microstructure and its stability in performance of wheels in heavy haul service

Thermal or thermo-mechanical loading is one of the major causes of wheel surface damage in Australian heavy haul operations.In addition,multi-wear wheels appear to be particularly sensitive to thermo-mechanical damage during their first service life.Such damage can incur heavy machining penalties or even premature scrapping of wheels.The combination of high contact stresses as well as substantial thermal loading(such as during prolonged periods of tread braking) can lead to severe plastic deformation,thermal fatigue and microstructural deterioration.For some high-strength wheel grades,the increased sensitivity to thermo-mechanical damage observed during the first service period may be attributed to the presence of a near-surface region in which the microstructure is more sensitive to these loading conditions than the underlying material.The standards applicable to wheels used in Australian heavy haul operations are based on the Association of American Railroads(AAR) specification M-107/M-208,which does not include any requirements for microstructure.The implementation of acceptance criteria for the microstructure,in particular that in the near-surface region of the wheel,may be necessary when new wheels are purchased.The stability of wheel microstructures during thermo-mechanical loading and the effects of alloying elements commonly used in wheel manufacturing are reviewed.A brief guide to improving thermal/mechanical stability of the microstructure is also provided.

Mechanical Property Stability of Cu-Mo-Ni Alloyed Austempered Ductile Iron

The aim of present work is to investigate the influencing factors on mechanical property stability of Cu-Mo-Ni alloyed austempered ductile iron （ADI）. The results show that after austenitized at 900℃ for 2 h followed by austempered at 370℃for another 2 h, the mechanical property of the alloyed ADI can reach the Germanite GGG-100 standard, i.e. σb≮1000 MPa,δ≮5%, at 95% confidence level. And the satisfactory mechanical properties were obtained when the alloyed ADI was austenitized at 850℃ to 1 000 ℃ for 1-4 h, and austempered at 355℃ to 400℃ for another 1 h to 4 h. The microstructures, including nodule number, white bright zone content （martensite-containing interdendritic segregation zone） and retained austenite content, can significantly influence the mechanical properties of the ADI. In order to obtain the good combinations of strength and ductility, the volume fraction of white bright zone should he less than 5%, and the retained austenite contents maintain hetween 30 % and 40%. The application of inoculation techniques to increase graphite nodule number can effectively reduce the white bright zone content in the structure.

Synthesis of ZnO quantum dots and their agglomeration mechanisms along with emission spectra based on ageing time and temperature

The ZnO quantum dots（QDs） were synthesized with improved chemical solution method.The size of the ZnO QDs is exceedingly uniform with a diameter of approximately 4.8 nm,which are homogeneously dispersed in ethanol.The optical absorption edge shifts from 370 nm of bulk material to 359 nm of QD materials due to the quantum size effect,while the photoluminescence peak shifts from 375 nm to 387 nm with the increase of the density of ZnO QDs.The stability of ZnO QDs was studied with different dispersion degrees at 0？C and at room temperature of 25？C.The agglomeration mechanisms and their relationship with the emission spectra were uncovered for the first time.With the ageing of Zn O QDs,the agglomeration is aggravated and the surface defects increase,which leads to the defect emission.

Stability for the Equilibrium State of Chaplygin’s Systems

The stability for the equitibrium states of Chaplygin’s systems is considered. Theequations of motion of Chaplygin’s systems and the existence conditions of their equilibrium states are given. Some criteria of stability for the equilibrium.states of Chaplygin’s systems are obtained. Two examples are finally given.

An upgraded polymeric composite with interparticle chemical bonding microstructure toward lithium-ion battery separators with enhanced safety and electrochemical performances

A composite separator of SiC/PVDF-HFP was synthesized for lithium-ion batteries with high thermal and mechanical stabilities.Benefiting from the nanoscale,high hardness,and melting point of SiC,SiC/PVDFHFP with highly uniform microstructure was obtained.This polarization caused by barrier penetration was significantly restrained.Due to the Si-F bond between SiC and PVDF-HFP,the structural stability has been obviously enhanced,which could suppress the growth of lithium(Li) dendrite.Furthermore,some 3D reticulated Si nanowires are found on the surface of Li anode,which also greatly inhibit Li dendrites and result in irregular flakes of Li metal.Especially,the shrinkage of 6% SiC/PVDF-HFP at 150℃ is only 5%,which is notably lower than those of PVDF-HFP and Celgard2500.The commercial LiFePO_(4) cell assembled with 6% SiC/PVDF-HFP possesses a specific capacity of 157.8 mA h g^(-1) and coulomb efficiency of 98% at 80℃.In addition,the tensile strength and modulus of 6% SiC/PVDF-HFP could reach 14.6 and 562 MPa,respectively.And a small deformation(1000 nm) and strong deformation recovery are obtained under a high additional load(2.3 mN).Compared with PVDF-HFP and Celgard2500,the symmetric Li cell assembled with 6% SiC/PVDF-HFP has not polarized after 900 cycles due to its excellent mechanical stabilities.This strategy provides a feasible solution for the composite separator of high-safety batteries with a high temperature and impact resistance.

An ab Initio Study of Mechanical and Electronic Properties of Stable Phases of CsXBr3 (X = Ge, Si) Compounds for Solar Cell Applications

Utilising the density functional theory, the mechanical and electrical characteristics of Cesium Germanium Bromide, CsGeBr3 and Cesium Silicon Bromide CsSiBr3 compounds were computed. The complicated and unique physical and chemical properties of these materials include the ideal geometric property, a limited electronic band structure, a charge density distribution, and specific van Hove singularities in the electronic density of states. With the use of the quantum espresso code and pseudo-potentials taken from the quantum espresso data repository, we have applied density functional theory. Plane Wave (PW) basis set and Projector Augmented Wave (PAW) pseudo potentials were used to compute the ground state energy. For the exchange correlation, where plane wave basis sets are used to expand the electronic structure wave function, the Generalised Gradient Approximation (GGA) was employed. For the computation of mechanical behaviour, including the bulk modulus and elastic constants with their derivatives, Thermo_pw was used as a post-processing algorithm. The theoretical framework that is being taught gives a thorough understanding of the many qualities and possible uses for solar cells and other opto-electronic devices. Both the cubic (high-temperature) and tetragonal (low-temperature) phases of CsGeBr3 were discovered to have an appropriate gap for solar cells. The edge-sharing monoclinic phase exhibits a greater distortion of the band structure than the cubic phase, which has a lower total energy and a somewhat bigger electronic gap. Although our estimations are less definite because the matching silicon-based compounds have not yet been created, they nonetheless point to a small gap for cubic CsGeBr3 of about 0.2 - 0.8 eV.

Rare Earth Stearates as Thermal Stabilizers for Rigid Poly(vinyl chloride)

A series of stearates with different rare-earth ion were investigated as thermal stabilizers for rigid PVC at 180 ℃ in air. Their stabilizing efficiency was based on measuring the rate of dehydrochlorination. The resulted revealed the higher stabilizing efficiency of the investigated rare-earth stearates as thermal stabilizers for rigid PVC compared with the thermal stabilizers for industry: calcium stearate, zinc stearate, butyl stannum mercaptide, phosphite esters, β-diketone and epoxidized sunflower oil. This was well illustrated by longer incubation period (T_S) values and lower rate of dehydrochlorination. The stable efficiency was affected by the nature of rare-earth element's individual electronic shell. The mechanism for the stabilizing effect of rare-earth stearates was proposed. The result was experimentally proved based on IR spectrum.

MINTEQ modeling for evaluating the leaching behavior of heavy metals in MSWI fly ash

At present,all kinds of municipal solid waste incineration (MSWI) fly ash stabilization technology has been reported and successfully applied in many countries.However,leaching procedures are very different that the technologies lack uniform standard,and it is even impossible to predict the long-term stabilization.Geochemical model can explain the environmental stabilization based on chemical phase and thermodynamic crystal structure,and it is also able to guide the development of environment-friendly stabi...