Edge detection in the potential field using the correlation coefficients of multidirectional standard deviations

Most edge-detection methods rely on calculating gradient derivatives of the potential field, a process that is easily affected by noise and is therefore of low stability. We propose a new edge-detection method named correlation coefficient of multidirectional standard deviations（CCMS） that is solely based on statistics. First, we prove the reliability of the proposed method using a single model and then a combination of models. The proposed method is evaluated by comparing the results with those obtained by other edge-detection methods. The CCMS method offers outstanding recognition, retains the sharpness of details, and has low sensitivity to noise. We also applied the CCMS method to Bouguer anomaly data of a potash deposit in Laos. The applicability of the CCMS method is shown by comparing the inferred tectonic framework to that inferred from remote sensing（RS） data.

Correlation of pattern reversal visual evoked potential parameters with the pattern standard deviation in primary open angle glaucoma

AIM:To evaluate whether glaucomatous visual field defect particularly the pattern standard deviation(PSD)of Humphrey visual field could be associated with visual evoked potential(VEP)parameters of patients having primary open angle glaucoma(POAG).METHODS:Visual field by Humphrey perimetry and simultaneous recordings of pattern reversal visual evoked potential(PRVEP)were assessed in 100 patients with POAG.The stimulus configuration for VEP recordings consisted of the transient pattern reversal method in which a black and white checker board pattern was generated(full field)and displayed on VEP monitor(colour 14')by an electronic pattern regenerator inbuilt in an evoked potential recorder(RMS EMG EP MARK II).RESULTS:The results of our study indicate that there is a highly significant(P【0.001)negative correlation of P100 amplitude and a statistically significant(P【0.05)positive correlation of N70 latency,P100 latency and N155 latency with the PSD of Humphrey visual field in the subjects of POAG in various age groups as evaluated by Student’s t-test.CONCLUSION:Prolongation of VEP latencies were mirrored by a corresponding increase of PSD values.Conversely,as PSD increases the magnitude of VEP excursions were found to be diminished.

Numerical investigation on the caving mechanism with different standard deviations of top coal block size in LTCC

The size distribution of the broken top coal blocks is an important factor,affecting the recovery ratio and the efficiency of drawing top coal in longwall top coal caving(LTCC)mining panel.The standard deviation of top coal block size(dt)is one of the main parameters to reflect the size distribution of top coal.To find the effect of dt on the caving mechanism,this study simulates experiments with 9 different dt by using discrete element software PFC.The dt is divided into two stages:uniform distribution stage(UDS)whose dt is less than 0.1(Schemes 1–5),and nonuniform distribution stage(NDS)whose dt is more than 0.1(Schemes 6–9).This research mainly investigates the variation of recovery ratio,drawing body shape,boundary of top coal,and contact force between particles in the two stages,respectively.The results showed that with the increasing dt,the recovery ratio of the panel increases first and then decreases in UDS.It is the largest in Scheme 3,which mainly increases the drawing volume at the side of starting drawing end.However,the recovery ratio decreases first and then increases quickly in NDS,and it is the largest in Scheme 9,where the drawing volume at the side of finishing drawing end are relatively higher.In UDS,the major size of top coal is basically medium,while in NDS,the size varies from medium to small,and then to large,with a distinct difference in shape and volume of the drawing body.When the major size of top coal is medium and small,the cross-section width of the initial boundary of top coal at each height is relatively small.Conversely,when the top coal size is large,the initial boundary of top coal has a larger opening range,the rotating angle of lower boundary is relatively small in the normal drawing stage,which is conducive to the development of drawing body and reduces the residual top coal,and the maximum particle velocity and the particles movement angle are both larger.This study lays a foundation for the prediction of recovery ratio,and suggests that the uniform top coal is more manageable and has a larger recovery ratio.

How to impute study-specific standard deviations in metaanalyses of skewed continuous endpoints?

AIM： To compare four methods to approximate mean and standard deviation （SD） when only medians and interquartile ranges are provided.METHODS： We performed simulated meta-analyses on six datasets of 15, 30, 50, 100, 500, and 1000 trials, respectively. Subjects were iteratively generated from one of the following seven scenarios： five theoreti-cal continuous distributions [Normal, Normal （0, 1）, Gamma, Exponential, and Bimodal] and two real-life distributions of intensive care unit stay and hospital stay. For each simulation, we calculated the pooled estimates assembling the study-specific medians and SD approximations： Conservative SD, less conservativeSD, mean SD, or interquartile range. We provided a graphical evaluation of the standardized differences.To show which imputation method produced the best estimate, we ranked those differences and calculated the rate at which each estimate appeared as the best, second-best, third-best, or fourth-best.RESULTS： Our results demonstrated that the best pooled estimate for the overall mean and SD was provided by the median and interquartile range （mean standardized estimates： 4.5 ± 2.2, P = 0.14） or by the median and the SD conservative estimate （mean standardized estimates： 4.5 ± 3.5, P = 0.13）. The less conservative approximation of SD appeared to be the worst method, exhibiting a significant difference from the reference method at the 90% confidence level. The method that ranked first most frequently is the interquartile range method （23/42 = 55%）, particularly when data were generated according to the Standard Normal, Gamma, and Exponential distributions. The second-best is the conservative SD method （15/42 = 36%）, particularly for data from a bimodal distributionand for the intensive care unit stay variable. CONCLUSION： Meta-analytic estimates are not signi-fcantly affected by approximating the missing values ofmean and SD with the correspondent values for medianand interquartile range.

Development and Parallelization of an Improved 2D Moving Window Standard Deviation Python Routine for Image Segmentation Purposes

Two additional features are particularly useful in pixelwise satellite data segmentation using neural networks: one results from local window averaging around each pixel (MWA) and another uses a standard deviation estimator (MWSD) instead of the average. While the former’s complexity has already been solved to a satisfying minimum, the latter did not. This article proposes a new algorithm that can substitute a naive MWSD, by making the complexity of the computational process fall from O(N2n2) to O(N2n), where N is a square input array side, and n is the moving window’s side length. The Numba python compiler was used to make python a competitive high-performance computing language in our optimizations. Our results show efficiency benchmars

Unbiased Estimation Formula of Unit Weight Standard Deviation in Regularization Solution

Regularization method is an effective method for solving ill\|posed equation. In this paper the unbiased estimation formula of unit weight standard deviation in the regularization solution is derived and the formula is verified with numerical case of 1 000 sample data by use of the typical ill\|posed equation, i.e. the Fredholm integration equation of the first kind.

A note on error bars as a graphical representation of the variability of data in biomedical research:choosing between standard deviation and standard error of the mean

Standard deviation(SD)and standard error of the mean(SEM)have been applied widely as error bars in scientific plots.Unfortunately,there is no universally accepted principle addressing which of these 2 measures should be used.Here we seek to fill this gap by outlining the reasoning for choosing SEM over SD and hope to shed light on this unsettled disagreement among the biomedical community.The utility of SEM and SD as error bars is further discussed by examining the figures and plots published in 2 research articles on pancreatic disease.

Pervasive underwater passive target tracking for the computation of standard deviation solution in a 3D environment

Purpose-Nowadays advancement in acoustic technology can be explored with marine assets.The purpose of the paper is pervasive computing underwater target tracking has aroused military and civilian interest as a key component of ocean exploration.While many pervasive techniques are currently found in the literature,there is little published research on the effectiveness of these paradigms in the target tracking context.Design/methodology/approach-The unscented Kalman filter(UKF)provides good results for bearing and elevation angles only tracking.Detailed methodology and mathematical modeling are carried out and used to analyze the performance of the filter based on the Monte Carlo simulation.Findings-Due to the intricacy of maritime surroundings,tracking underwater targets using acoustic signals,without knowing the range parameter is difficult.The intention is to find out the solution in terms of standard deviation in a three-dimensional(3D)space.Originality/value-A new method is found for the acceptance criteria for range,course,speed and pitch based on the standard deviation for bearing and elevation 3D target tracking using the unscented Kalman filter covariance matrix.In the Monte Carlo simulation,several scenarios are used and the results are shown.

Spatiotemporal characteristics of cultivated land use eco-efficiency and its influencing factors in China from 2000 to 2020

Improving cultivated land use eco-efficiency(CLUE)can effectively promote agricultural sustainability,particularly in developing countries where CLUE is generally low.This study used provincial-level data from China to evaluate the spatiotemporal evolution of CLUE from 2000 to 2020 and identified the influencing factors of CLUE by using a panel Tobit model.In addition,given the undesirable outputs of agricultural production,we incorporated carbon emissions and nonpoint source pollution into the global benchmark-undesirable output-super efficiency-slacks-based measure(GB-US-SBM)model,which combines global benchmark technology,undesirable output,super efficiency,and slacks-based measure.The results indicated that there was an upward trend in CLUE in China from 2000 to 2020,with an increase rate of 2.62%.The temporal evolution of CLUE in China could be classified into three distinct stages:a period of fluctuating decrease(2000-2007),a phase of gradual increase(2008-2014),and a period of rapid growth(2015-2020).The major grain-producing areas(MPAs)had a lower CLUE than their counterparts,namely,non-major grain-production areas(non-MPAs).The spatial agglomeration effect followed a northeast-southwest strip distribution;and the movement path of barycentre revealed a"P"shape,with Luoyang City,Henan Province,as the centre.In terms of influencing factors of CLUE,investment in science and technology played the most vital role in improving CLUE,while irrigation index had the most negative effect.It should be noted that these two influencing factors had different impacts on MPAs and non-MPAs.Therefore,relevant departments should formulate policies to enhance the level of science and technology,improve irrigation condition,and promote sustainable utilization of cultivated land.

Spatiotemporal patterns and drivers of cultivated land conversion in Inner Mongolia Autonomous Region,northern China

Protection and optimization of cultivated land resources are of great significance to national food security.Cultivated land conversion in northern China has increased in recent years due to the industrialization and urbanization of society.However,the assessment of cultivated land conversion in this area is insufficient,posing a potential risk to cultivated land resources.This study evaluated the evolution and spatiotemporal patterns of cultivated land conversion in Inner Mongolia Autonomous Region,China,and the driving factors to improve rational utilization and to protect cultivated land resources.The spatiotemporal patterns of cultivated land conversion in Inner Mongolia were analyzed using the cultivated land conversion index,kernel density analysis,a standard deviation ellipse model,and a geographic detector.Results showed that from 2000 to 2020,the trends in cultivated land conversion area and rate in Inner Mongolia exhibited fluctuating growth,with the total area of cultivated land conversion reaching 7307.59 km^(2) at a rate of 6.69%.Spatial distribution of cultivated land conversion was primarily concentrated in the Hetao Plain,Nengjiang Plain,Liaohe Plain,and the Hohhot-Baotou-Ordos urban agglomeration.Moreover,the standard deviational ellipse of cultivated land conversion in Inner Mongolia exhibited a directional southwest-northeast-southwest-northeast distribution,with the northeast-southwest direction identified as the main driving force of spatial change in cultivated land conversion.Meanwhile,cultivated land conversion exhibited an increase-decrease-increase change process,indicating that spatial distribution of cultivated land conversion in Inner Mongolia became gradually apparent within the study period.The geographic detector results further revealed that the main driving factors of cultivated land conversion in Inner Mongolia were the share of secondary and tertiary industries and per-unit area yield of grain,with explanatory rates of 57.00%,55.00%,and 51.00%,respectively.Additionally,improved agricultural production efficiency and the coordinated development of population urbanization and industry resulted in cultivated land conversion.Collectively,the findings of this study indicated that,from 2000 to 2020,the cultivated land conversion in Inner Mongolia was significant and fluctuated in time,and had strong spatial heterogeneity.The primary drivers of these events included the effects of agriculture,population,and social economy.

Measures of Variability for Qualitative Variables Using the R Software

Although there are many measures of variability for qualitative variables, they are little used in social research, nor are they included in statistical software. The aim of this article is to present six measures of variation for qualitative variables of simple calculation, as well as to facilitate their use by means of the R software. The measures considered are, on the one hand, Freemans variation ratio, Morals universal variation ratio, Kvalseths standard deviation from the mode, and Wilcoxs variation ratio which are most affected by proximity to a constant random variable, where the measures of variability for qualitative variables reach their minimum value of 0. On the other hand, the Gibbs-Poston index of qualitative variation and Shannons relative entropy are included, which are more affected by the proximity to a uniform distribution, where the measures of variability for qualitative variables reach their maximum value of 1. Point and interval estimation are addressed. Bootstrap by the percentile and bias-corrected and accelerated percentile methods are used to obtain confidence intervals. Two calculation situations are presented: with a sample mode and with two or more modes. The standard deviation from the mode among the six considered measures, and the universal variation ratio among the three variation ratios, are particularly recommended for use.

Spatial Morphology Evolution Characteristics Analysis of the Resident Population Distribution in Henan, China

The population spatial distribution pattern and its evolving pattern play an important role in regional allocation of social resources and production factors, formulation of regional development plans, construction of a better life society, and promotion of regional economic development. Based on the resident population statistics data of Henan province from 2006 to 2021, with county as the basic study unit, the paper studies the spatial morphology characteristics and its evolution patterns of resident population distribution, by using spatial analysis methods such as population distribution center, standard deviation ellipse, and spatial auto correlation analysis. The results show that: the resident population spatial distribution shows unbalanced state, the population agglomeration areas mainly distribute in the northeast part and north part, where the resident population growth rate is significantly higher than other regions, over time, this trend is gradually becoming significant. The resident population distribution has a trend of centripetal concentration, with the degree and trend of centripetal gradually strengthening. The resident population distribution has obvious directional characteristics, but the significance is not high, the weighted resident population average center is approximately located at (4.13740˚N, 113.8935˚E), and the azimuth of the distribution axis is approximately 11.19˚. The population distribution has obvious agglomeration characteristics, with the built-up areas of Zhengzhou and Luoyang as their centers, where have a significant siphon effect on the surrounding population. The southern and southwestern regions in the province form a relatively stable belt area of Low-Low agglomeration areas.

Matrix effect suppressing in the element analysis of soils by laser-induced breakdown spectroscopy with acoustic correction

Laser-induced breakdown spectroscopy(LIBS)has been used for soil analysis,but its measurement accuracy is often influenced by matrix effects of different kinds of soils.In this work,a method for matrix effect suppressing was developed using laser-induced plasma acoustic signals to correct the original spectrum,thereby improving the analysis accuracy of the soil elements.A good linear relationship was investigated firstly between the original spectral intensity and the acoustic signals.The relative standard deviations(RSDs)of Mg,Ca,Sr,and Ba elements were then calculated for both the original spectrum and the spectrum with the acoustic correction,and the RSDs were significantly reduced with the acoustic correction.Finally,calibration curves of MgⅠ285.213 nm,CaⅠ422.673 nm,SrⅠ460.733 nm and BaⅡ455.403 nm were established to assess the analytical performance of the proposed acoustic correction method.The values of the determination coefficient(R~2)of the calibration curves for Mg,Ca,Sr,and Ba elements,corrected by the acoustic amplitude,are improved from 0.9845,0.9588,0.6165,and 0.6490 to 0.9876,0.9677,0.8768,and 0.8209,respectively.The values of R~2 of the calibration curves corrected by the acoustic energy are further improved to 0.9917,0.9827,0.8835,and 0.8694,respectively.These results suggest that the matrix effect of LIBS on soils can be clearly improved by using acoustic correction,and acoustic energy correction works more efficiently than acoustic amplitude correction.This work provides a simple and efficient method for correcting matrix effects in the element analysis of soils by acoustic signals.

Climatic Factors for Limiting Northward Distribution of Eight Temperate Tree Species in Eastern North America

Eight temperate deciduous tree species, Acer rubrum L., A. saccharinum L., A. saccharum Marsh., Belluta alleghaniensis Britton., Fraxinus nigra Marsh., Quercus rubra L., Titia americana L., and Ulmus americana L. in eastern North America, were selected to explore relationship between the northward distribution of temperate tree species and climatic factors. For each species, more than 30 sites at their north limits of distribution were obtained from their distribution maps, and 11 climatic indices at the north limits were computed. The standardized standard deviation (SD) method, which compares the magnitude of variance of climatic indices, was used to detect which climatic parameter was the most important for explaining northward distribution of these species. We presume that the climatic parameter that has the smallest variance at the north limit would be assigned as the dominant climatic factor for limiting the distribution of this species. The results derived from the standardized SD method indicated that the SD value of warmth index (WI) and/or annual biotemperature (ABT) were the smallest among the 11 climatic indices. Since both WI and ABT represent growing season temperature, it suggested that growing season temperature was the most important climatic factor for explaining the northward distribution of these temperate tree species. The relationships between several climatic indices, WI, coldness index (CI), annual precipitation (AP), annual range of temperature (ART) and humid/arid index were also analyzed. As a result, at the north limits of all these species, both WI and CI decreased with an increase of AP, and CI increased with an increase of ART. Besides growing season temperature, precipitation and climatic continentality also have influence on the northward distribution of the temperate trees in eastern North America.

Study on the scales of heterogeneous geologic bodies in random media

In order to study the scale characteristics of heterogeneities in complex media, a random medium is constructed using a statistical method and by changing model parameters （autocorrelation lengths a and b）, the scales of heterogeneous geologic bodies in the horizontal and the vertical Cartesian directions may be varied in the medium. The autocorrelation lengths a and b represent the mean scale of heterogeneous geologic bodies in the horizontal and vertical Cartesian directions in the randQm medium, respectively. Based on this model, the relationship between model autocorrelation lengths and heterogeneous geologic body scales is studied by horizontal velocity variation and standard deviation. The horizontal velocity variation research shows that velocities are in random perturbation. The heterogeneous geologic body scale increases with increasing autocorrelation length. The recursion equation for the relationship between autocorrelation lengths and heterogeneous geologic body scales is determined from the velocity standard deviation research and the actual heterogeneous geologic body scale magnitude can be estimated by the equation.

The Effect of Climatic Jump on the Agricultural Production in Shenyang

Using conventional mathematical statistics,linear regression and the standard deviation,the quantitative analysis was made on the climate changes in Shenyang.The results showed that the trend of precipitation reduced 155 mm,which was made the greatest contribution by summer and autumn.It decreased 43 mm on the average after the climate jump.The precipitation variability in spring increased and drought risk in spring increased.The first soaking rain limited the spring planting time.The temperature trend raised 1.3℃,mainly in spring and winter.The frost-free period extended about 13 d.The accumulated temperature trends in crop growing season increased 290℃ and it had an average increase of 178℃ after the climate jump.This trend of climate warming made the end of last frost advanced.Early sowing of crops suitably was possible,which was beneficial for agricultural production.The precipitation decrease,the time delay and instability of the first soaking rain were unfavorable for crop growth and seeding.And they became the factors that constrained the normal growth and stabile yield raise of crops.

Effects of Grain Angle on Reproducibility and Accurate Measurement of Moisture Content of Wood Samples Using a Pin-Style Moisture Meter

Studies were conducted on the effects of grain angle on reproducibility and accurate measurement of moisture content of four wood samples using a pin-style moisture meter. The wood samples were partitioned into four quadrants and moisture contents were measured along the grain direction in the first and second quadrants from 0 degree to 150 degrees insteps of 30 degrees. Experimental results indicated that the average moisture content remained constant as the grain angle increased. Repeated measurements of moisture content at different grain angles or points on the wood surface showed similar patterns of variation. Within-point standard deviations of the moisture contents were greater than between-point standard deviations. A non-destructive method of measuring moisture content at the same location or point on the wood surfaces could not be proposed because of the high variation of moisture content when repeated measurements were taken at the same point. Instead, accurate measurements of moisture content could be obtained at random positions within a radius of 30 mm from the point of intersection of the moisture content axis and the grain angle.

GIS Analysis of Spatial Distribution of Crop Incidence

Using GIS spatial statistical analysis method, with ArcGIS software as an analysis tool, taking the diseased maize in Hedong District of Linyi City as the study object, the distribution characteristic of the diseased crops this time in spatial location was analyzed. The results showed that the diseased crops mainly dis- tributed along with river tributaries and downstream of main rivers. The correlation between adjacent diseased plots was little, so the infection of pests and diseases were excluded, and the major reason of incidence might be river pollution.

Surface Roughness Around a 325-m Meteorological Tower and Its Effect on Urban Turbulence

Based on slow- and fast-response measurements under neutral stratification conditions from a 325-m meteorological tower located in a built-up area of north-central Beijing as well as a descriptive survey of surface roughness elements (i.e., buildings and trees) around the tower site, urban roughness lengths, zo, with zero-plane displacement height are estimated using logarithmic wind profile and morphometric methods in eight 45° directional sectors. When comparing their results with each other, the slow-response method tends to give smaller zo values. At a given location, considerable directional variations in values are observed. The effect of surface roughness on urban turbulence characteristics in terms of non-dimensional standard deviations of three-component velocity, σi/u*1 (where i = u, v, w and u*1 is local friction velocity), is investigated.

Changes in cultivated land patterns and driving forces in the Three Gorges Reservoir area, China, from 1992 to 2015

Changes of cultivated land patterns caused by major water conservation projects are rarely reported. We selected the Three Gorges Reservoir area in China to study the change in area and landscape pattern of the cultivated land in the head,central, and tail areas of the reservoir that took place between 1992 and 2015;we then studied the spatial distribution of the cultivated land in the three parts of the reservoir;finally, we studied the driving forces behind the changes in the cultivated land. The results derived are as follows.(1) During the construction of the Three Gorges Project(TGP, 1992–2015), the area of cultivated land around the reservoir decreased by30.23 million ha. This reduction occurred in phases:the most severe change in cultivated land occurred during the later stage of the project(2002–2010);only 0.62 million ha of cultivated land did not change between 1992 and 2015.(2) Spatial pattern analysis showed that the cultivated land in the three parts of the reservoir changed from a northern distribution to a southern distribution;thus, the area of cultivated land in the north decreased over the time period. The area of cultivated land in the head and tail areas decreased by varying degrees, while it increased in the central area over the 23 years, indicating that the change in cultivated land showed regional differences.(3) The TGP, the policy of reverting farmland to forest,and urbanization were the main driving factors for the change of cultivated land, but there were differences in their impacts at different stages.(4) According to the patch dynamics of the land cover change, the degree of change gradually intensified during the early and later stages of the project and then stabilized during the operational period. Our research provides scientific support for the protection of cultivated land resources and food security in the reservoir area and for the coordination of social and economic development, which is of great significance to sustainable development in the reservoir area.