Thermoplastic Starch Prepared with Different Plasticizers: Relation between Degree of Plasticization and Properties

Ethylene glycol, glycerol, sorbitol, formamide, and urea were used as plasticizers for the preparation of thermoplastic starch（TPS） from corn starch. The properties of TPS were tested by analysis method. The results showed that TPSs were more highly plasticized with amines than alcohols. For the same type of plasticizer, the degree of plasticization decreased as the molecular weight of plasticizer increased. The relationship between plasticization degree and TPS properties was characterized and described by mechanical properties and water absorption. The experimental results showed that when the degree of plasticization increased, the tensile strength decreased and the elongation at breakage and water absorption increased.

Electroneutral Quaternization/Sulfosuccination for Alleviating the Adverse Effect of Paste Aging on the Properties of Corn Starch Film

For the purpose of alleviating the adverse effect of paste aging on the properties of corn starch film, a series of electroneutrally quaternized/sulfosuccinylated starches（EQSS） with different degrees of substitution（DS） were synthesized via the quaternization/sulfosuccination of acid-thinned corn starch（ATS） by varying the amounts of N-（3-chloro-2-hydroxypropl） trimethylammonium chloride, maleic anhydride, and sodium hydrogen sulfite. The influence of paste aging on the properties of starch film cast from heat-induced starch paste was investigated and the properties were explored in terms of tensile strength, elongation, work at break, degree of crystallinity, and flex-fatigue resistance. The experimental results showed that the paste ageing generated adverse influence on the elongation, work at break, and flex-fatigue resistance of starch film. Further experiments showed that electroneutral quaternization/sulfosuccination of starch were able to alleviate the negative effect of paste ageing on the elongation, work at break, and flex-fatigue resistance, thereby obviously enhancing the elongation, work at break and flex-fatigue resistance, and thus reducing the drawback of brittleness. The enhancement depended on the amounts of the substituents introduced. With the increase in DS value, the elongation and work at break as well as flex-fatigue resistance continuously rose, whereas the tensile strength gradually reduced.

Comparative Study on the Structural and Physicochemical Properties of Flour and Starch from Dioscorea opposita Thunb

The objective of this work was to investigate and compare the structural and physicochemical properties of Dioscorea opposita Thunb. flour（DF）, starch（DS） and purified starch（PDS）. DS and PDS showed higher total starch and amylose content as compared to DF. Starch granules of DF were oval shape with rough surface while DS and PDS were relatively smooth by SEM. According to XRD measurements, FT-IR spectroscopy and 13 C CP/MAS NMR spectroscopy, all samples displayed C-type crystalline pattern, and PDS displayed the highest relative crystallinity and short-range order structure. However, DF contained the greatest content of the amorphous-phase. DF displayed the absorption peaks at 1730 and 1560 cm^-1 related to the characteristic groups of lipid and protein using FT-IR spectroscopy. Furthermore, DF exhibited significantly higher pasting temperature while DS displayed the great peak and breakdown viscosity, as well as PDS had the highest setback and final viscosity, presumably due to the chemical composition and structural differences. DF exhibited the highest gelatinization temperature whereas PDS displayed the greatest gelatinization enthalpy. The pasting and gelatinization properties of flour and starch might be related to the relative crystallinity, short-range order structure or the interactions between starch and its associated compounds. The results allow the improvement in the manufacture of Dioscorea opposita Thunb. flour and starch with desirable pasting and gelatinization properties.

A plastidic ATP/ADP transporter gene, IbAATP, increases starch and amylose contents and alters starch structure in transgenic sweetpotato

A plastidic adenosine triphosphate（ATP）/adenosine diphosphate（ADP） transporter（AATP） is responsible for importing ATP from the cytosol into plastids. In dicotyledonous plants, increasing ATP supply is a potential way to facilitate anabolic synthesis in heterotrophic plastids. In this study, a gene encoding the AATP protein, named Ib AATP, was isolated from sweetpotato（Ipomoea batatas（L.） Lam.）. Transcripts of Ib AATP were predominantly detected in the storage roots and leaves and were induced by exogenous sucrose and subjected to circadian rhythm. Transient expression of Ib AATP in tobacco and onion epidermal cells revealed the plastidic localization of Ib AATP. The overexpression of Ib AATP in sweetpotato significantly increased the starch and amylose contents and led to enlarged starch granules. The IbA ATP-overexpressing plants showed altered fine structure of amylopectin, which contained an increased proportion of chains with a degree of polymerization（DP） of 10–23 and a reduced number of chains with a DP of 5–9 and 24–40. In addition, starch from the transgenic plants exhibited different pasting properties. The transcript levels of starch biosynthetic genes, including Ib AGP, Ib GBSSI, Ib SSIIV, and Ib SBE, were differentially regulated in the transgenic plants. These results revealed the explicit role of Ib AATP in the starch biosynthesis of sweetpotato and indicated that this gene has the potential to be used to improve starch content and quality in sweetpotato and other plants.

Characterization of A-and B-type starch granules in Chinese wheat cultivars

Starch is the major component of wheat flour and serves as a multifunctional ingredient in food industry. The objective of the present study was to investigate starch granule size distribution of Chinese wheat cultivars, and to compare structure and functionality of starches in four leading cultivars Zhongmai 175, CA12092, Lunxuan 987, and Zhongyou 206. A wide variation in volume percentages of A- and B-type starch granules among genotypes was observed. Volume percentages of A- and B-type granules had ranges of 68.4–88.9% and 9.7–27.9% in the first cropping seasons, 74.1–90.1% and 7.2–25.3% in the second. Wheat cultivars with higher volume percentages of A- and B-type granules could serve as parents in breeding program for selecting high and low amylose wheat cultivars, respectively. In comparison with the B-type starch granules, the A-type granules starch showed difference in three aspects：（1） higher amount of ordered short-range structure and a lower relative crystallinity,（2） higher gelatinization onset（To） temperatures and enthalpies（ΔH）, and lower gelatinization conclusion temperatures（Tc）,（3） greater peak, though, and final viscosity, and lower breakdown viscosity and pasting temperature. It provides important information for breeders to develop potentially useful cultivars with particular functional properties of their starches suited to specific applications.

The Relationship Between Chinese Raw Dumpling Quality and Flour Characteristics of Shandong Winter Wheat Cultivars

Dumpling is one of the most important traditional wheat products in China. Dumpling quality is determined by the characteristics of both flour and filling, thus improvement of flour quality plays an important role in improving dumpling quality. Thirty-nine Shandong winter wheat cultivars and advanced lines sown in Jinan, Shandong Province, China, in the 2008-2009 cropping season were used to determine genetic variation in Chinese raw dumpling quality and its relationship with flour characteristics. Large variations were observed for protein quality parameters in comparison with starch properties. Variation in color of the raw dumpling sheet was broader than that of sensory evaluation parameters of boiled dumpling among tested wheat cultivars, indicating the large influence of filling on dumpling color. Two cultivars, Jimai 20 and Zimai 12, were identified as possessing very good quality of raw dumpling, and 21 cultivars and advanced lines showed good quality. Protein and total starch content influenced the L＊ value of raw dumpling sheets. L＂ value at 0 and 2 h after sheeting were significantly influenced by protein content （r=-0.46 and -0.52, P〈0.01） and total starch content （r=0.55 and 0.57, P〈0.01）, respectively. Flour yellow pigment was significantly corrected with a＊ （r=-0.67 and -0.62, P〈0.01） and b＊ （r=0.87 and 0.84, P〈0.01） value of raw dumpling sheets at 0 and 2 h after sheeting, respectively. Gluten strength parameters such as farinograph mixing tolerance index （MTI, r=-0.55, P〈0.01） were positively associated with appearance. MTI and energy were also significantly and positively correlated with elasticity of raw dumpling, with r=-0.54 and 0.47 （P〈0.01）. The positive relationships between peak viscosity （r=0.51, P〈0.01）, breakdown （r=0.54, P〈0.01）, and smoothness of raw dumpling were also observed. Therefore, it is suggested that breeding programs should give more attention to gluten strength and starch pasting parameters for raw dumpling quality improvement.

A facile and green synthetic approach toward fabrication of starch-stabilized magnetite nanoparticles

A facile and green synthetic approach for fabrication of starch-stabilized magnetite nanoparticles was implemented at moderate temperature. This synthesis involved the use of iron salts, potato starch,sodium hydroxide and deionized water as iron precursors, stabilizer, reducing agent and solvent respectively. The nanoparticles（NPs） were characterized by UV-vis, PXRD, HR-TEM, FESEM, EDX, VSM and FT-IR spectroscopy. The ultrasonic assisted co-precipitation technique provides well formation of highly distributed starch/Fe3O4-NPs. Based on UV–vis analysis, the sample showed the characteristic of surface plasmon resonance in the presence of Fe3O4-NPs. The PXRD pattern depicted the characteristic of the cubic lattice structure of Fe3O4-NPs. HR-TEM analysis showed the good dispersion of NPs with a mean diameter and standard deviation of 10.68 4.207 nm. The d spacing measured from the lattice images were found to be around 0.30 nm and 0.52 nm attributed to the Fe3O4 and starch, respectively. FESEM analysis confirmed the formation of spherical starch/Fe3O4-NPs with the emission of elements of C, O and Fe by EDX analysis. The magnetic properties illustrated by VSM analysis indicated that the as synthesized sample has a saturation magnetization and coercivity of 5.30 emu/g and 22.898 G respectively.Additionally, the FTIR analysis confirmed the binding of starch with Fe3O4-NPs. This method was cost effective, facile and eco-friendly alternative for preparation of NPs.