Targeted multi-agent communication algorithm based on state control

As an important mechanism in multi-agent interaction,communication can make agents form complex team relationships rather than constitute a simple set of multiple independent agents.However,the existing communication schemes can bring much timing redundancy and irrelevant messages,which seriously affects their practical application.To solve this problem,this paper proposes a targeted multiagent communication algorithm based on state control(SCTC).The SCTC uses a gating mechanism based on state control to reduce the timing redundancy of communication between agents and determines the interaction relationship between agents and the importance weight of a communication message through a series connection of hard-and self-attention mechanisms,realizing targeted communication message processing.In addition,by minimizing the difference between the fusion message generated from a real communication message of each agent and a fusion message generated from the buffered message,the correctness of the final action choice of the agent is ensured.Our evaluation using a challenging set of Star Craft II benchmarks indicates that the SCTC can significantly improve the learning performance and reduce the communication overhead between agents,thus ensuring better cooperation between agents.

Comparative Study of Trajectory Tracking Control for Automated Vehicles via Model Predictive Control and Robust H-infinity State Feedback Control

A comparative study of model predictive control(MPC)schemes and robust Hstate feedback control(RSC)method for trajectory tracking is proposed in this paper.The main objective of this paper is to compare MPC and RSC controllers’performance in tracking predefined trajectory under different scenarios.MPC controller is designed based on the simple longitudinal-yaw-lateral motions of a single-track vehicle with a linear tire,which is an approximation of the more realistic model of a vehicle with double-track motion with a non-linear tire mode.RSC is designed on the basis of the same method as adopted for the MPC controller to achieve a fair comparison.Then,three test cases are built in CarSim-Simulink joint platform.Specifically,the verification test is used to test the tracking accuracy of MPC and RSC controller under well road conditions.Besides,the double lane change test with low road adhesion is designed to find the maximum velocity that both controllers can carry out while guaranteeing stability.Furthermore,an extreme curve test is built where the road adhesion changes suddenly,in order to test the performance of both controllers under extreme conditions.Finally,the advantages and disadvantages of MPC and RSC under different scenarios are also discussed.

Mixed H_2/H_∞ State Feedback Attitude Control of Microsatellite Based on Extended LMI Method

For the appearance of the additive perturbation of controller gain when the controller parameter has minute adjustment at the initial running stage of system,to avoid the adverse effects,this paper investigates the mixed H_2/H_∞ state feedback attitude control problem of microsatellite based on extended LMI method.Firstly,the microsatellite attitude control system is established and transformed into corresponding state space form.Then,without the equivalence restriction of the two Lyapunov variables of H_2 and H∞performance,this paper introduces additional variables to design the mixed H_2/H_∞ control method based on LMI which can also reduce the conservatives.Finally,numerical simulations are analyzed to show that the proposed method can make the satellite stable within 20 s whether there is additive perturbation of the controller gain or not.The comparative analysis of the simulation results between extended LMI method and traditional LMI method also demonstrates the effectiveness and feasibility of the proposed method in this paper.

State Feedback Sliding Mode Control without Chattering by Constructing Hurwitz Matrix for AUV Movement

This paper presents a new method to eliminate the chattering of state feedback sliding mode control （SMC） law for the mobile control of an autonomous underwater vehicle （AUV） which is nonlinear and suffers from unknown disturbances system. SMC is a well-known nonlinear system control algorithm for its anti-disturbances capability, while the chattering on switch surface is one stiff question. To dissipate the well-known chattering of SMC, the switching manifold is proposed by presetting a Hurwitz matrix which is deducted from the state feedback matrix. Meanwhile, the best switching surface is achieved by use of eigenvalues of the Hurwitz matrix. The state feedback control parameters are not only applied to control the states of AUV but also connected with coefficients of switching surface. The convergence of the proposed control law is verified by Lyapunov function and the robust character is validated by the Matlab platform of one AUV model.

Controlled remote preparation of an arbitrary four-qubit cluster-type state

Two schemes are proposed to realize the controlled remote preparation of an arbitrary four-qubit cluster-type state via a partially entangled channel. We construct ingenious measurement bases at the sender’s and the controller’s locations, which play a decisive role in the proposed schemes. The success probabilities can reach 50% and 100%, respectively. Compared with the previous proposals, the success probabilities are independent of the coefficients of the entangled channel.

Optimizing the electronic spin state and delocalized electron of NiCo_(2)(OH)_(x)/MXene composite by interface engineering and plasma boosting oxygen evolution reaction

The electrocatalytic activity of transition-metal-based compounds is closely related to the electronic configuration.However,optimizing the surface electron spin state of catalysts remains a challenge.Here,we developed a spin-state and delocalized electron regulation method to optimize oxygen evolution reaction(OER)performance by in-situ growth of NiCo_(2)(OH)_(x) using Oswald ripening and coordinating etching process on MXene and plasma treatment.X-ray absorption spectroscopy,magnetic tests and electron paramagnetic resonance reveal that the coupling of NiCo_(2)(OH)_(x) and MXene can induce remarkable spin-state transition of Co^(3+)and transition metal ions electron delocalization,plasma treatment further optimizes the 3 d orbital structure and delocalized electron density.The unique Jahn-Teller phenomenon can be brought by the intermediate spin state(t2 _(g)^(5) e_(g)^(1))of Co^(3+),which benefits from the partial electron occupied egorbitals.This distinct electron configuration(t2_(g)^(5) e_(g)^(1))with unpaired electrons leads to orbital degeneracy,that the adsorption free energy of intermediate species and conductivity were further optimized.The optimized electrocatalyst exhibits excellent OER activity with an overpotential of 268 m V at 10 m A cm^(-2).DFT calculations show that plasma treatment can effectively regulate the d-band center of TMs to optimize the adsorption and improve the OER activity.This approach could guide the rational design and discovery of electrocatalysts with ideal electron configurations in the future.

THE SOLID STATE CONTROLLED PHOTOCHEMICAL REACTION OF NITROBENZALDEHYDE WITH INDOLE

The solid state photochemical reaction of nitrobenzaldehyde with indole was investigated. Seven hey products were identified by IR, MS,;H HMR and elemental analysis.

Controlled quantum state sharing of arbitrary two-qubit states with five-qubit cluster states

In this paper, we propose a controlled quantum state sharing scheme to share an arbitrary two-qubit state using a five-qubit cluster state and the Bell state measurement. In this scheme, the five-qubit cluster state is shared by a sender （Alice）, a controller （Charlie）, and a receiver （Bob）, and the sender only needs to perform the Bell-state measurements on her particles during the quantum state sharing process, the controller performs a single-qubit projective measurement on his particles, then the receiver can reconstruct the arbitrary two-qubit state by performing some appropriate unitary transformations on his particles after he has known the measured results of the sender and the controller.

Symmetry-controlled edge states in graphene-like topological sonic crystal

Unique topological states emerged in various topological insulators (TI) have been proved with great application value for robust wave regulation. In this work, we demonstrate the parity inversion related to the definition of the primitive cell in one common lattice, and realize a type of symmetry-controlled edge states confined on the zigzag interfaces of the graphene-like sonic topological crystal. By simply sliding the selected 'layer' near the interface, the coupling of the pseudospin states induced by the multiple scattering for the C6v lattice results in the adjustment of the edge states. Based on the physics of the states, we experimentally propose a prototype of acoustic topological filter hosting multiple channels with independent adjustable edge states and realize the selective high transmission. Our work diversifies the prospects for the applications of the gapped edge states in the robust wave regulation, and proposes a frame to design new topological devices.

Power Control Based on State Space Strategies for Grid⁃Oriented Inverters with LCL Filters

Through a third⁃order mathematical model of grid⁃oriented LCL⁃type converters,this paper analyzes the complicated dynamic characteristics and resonance problems which may influence the system stability.To realize active damping for LCL filters and improve dynamic performance of current regulators,a state space current PI controller is proposed whose parameters can be tuned based on the polynomial equations approach.An extended state observer is integrated with the regulation scheme,where additional sensors are not necessary in contrast with conventional active damping strategies.Synchronous reference frame PLL(SRF⁃PLL)equipped with filter technology is proposed for grid voltage disturbance suppression.This method is then applied to establish a double⁃closed⁃loop power regulator that demonstrates improved performance compared with other controllers.The simulation results are displayed to illustrate the efficiency of the regulation methods.

SEQUENTIAL QUADRATIC PROGRAMMING METHODS FOR OPTIMAL CONTROL PROBLEMS WITH STATE CONSTRAINTS

A kind of direct methods is presented for the solution of optimal control problems with state constraints. These methods are sequential quadratic programming methods. At every iteration a quadratic programming which is obtained by quadratic approximation to Lagrangian function and linear approximations to constraints is solved to get a search direction for a merit function. The merit function is formulated by augmenting the Lagrangian function with a penalty term. A line search is carried out along the search direction to determine a step length such that the merit function is decreased. The methods presented in this paper include continuous sequential quadratic programming methods and discreate sequential quadratic programming methods.

Controlling of the Polarization States of Electromagnetic Waves Using Epsilon-near-Zero Metamaterials

We demonstrate theoretically that the epsilon-near-zero materials can be utilized to control effectively the polarization conversion of an electromagnetic wave through reflection. The significant feature differing from all other means based on whatever natural materials or metamaterials is that for TM incident wave, the reflected phase is a constant, while for TE wave, the reflected phase is a linear function of the incident angle. The phase difference between them covers the range from -180°to 0°, and the polarization conversions from linear states to elliptical or circular states can be obtained by only adjusting the incident angle. Because no complex structures are employed, our proposal promises a simple approach for manipulating polarization conversion at both terahertz and optical frequencies.

AMENDMENTS TO REGULATIONS FOR FOREIGN EXCHANGE CONTROL BY THE STATE COUNCIL

Recently,decision has been made by the State Council onthe amendments to the Regulations for foreign Exchange Controlof the People’s Republic of China".The following amendments to the "Regulations Foreign Ex-change Control of the People’s Republic of China" are decided bythe State Council:1.Add an article and become Article five "No restriction bythe State as to regular international payment and transfer".2.Article 13 Clause one become Article 14 Clause one,amendto read "Foreign exchange of private use by individuals can be pur-chased within the prescribed limit amount.Foreign exchange ofprivate use by individuals in excess of the prescribed limit amount,an application has to be filed with the Administration of ExchangeControl,and foreign exchange can be purchased after

SHARED CONTROL METHOD FOR COMBINATION STATE CONVERSION OF ELECTRO－MECHANICAL EQUIPMENT

The theory of shared control combines organically the control of every controlled ele-ments and with it all the controlled elements share the same control element. Applying theschemes of shared control searched by assembly programs, an integrated control of all the ele-ments is fulfilled. The distinguishing point of the method is that the maximum control output canbe obtained with the least input information. Hence it is the optimum for the conversion of com-bination states. Finally, a thared rotary valve is designed, and it is the simplest with only onegroup of control holes.

Pure State Feedback Switching Control Based on the Online Estimated State for Stochastic Open Quantum Systems

For the n-qubit stochastic open quantum systems,based on the Lyapunov stability theorem and LaSalle’s invariant set principle,a pure state switching control based on on-line estimated state feedback(short for OQST-SFC)is proposed to realize the state transition the pure state of the target state including eigenstate and superposition state.The proposed switching control consists of a constant control and a control law designed based on the Lyapunov method,in which the Lyapunov function is the state distance of the system.The constant control is used to drive the system state from an initial state to the convergence domain only containing the target state,and a Lyapunov-based control is used to make the state enter the convergence domain and then continue to converge to the target state.At the same time,the continuous weak measurement of quantum system and the quantum state tomography method based on the on-line alternating direction multiplier(QST-OADM)are used to obtain the system information and estimate the quantum state which is used as the input of the quantum system controller.Then,the pure state feedback switching control method based on the on-line estimated state feedback is realized in an n-qubit stochastic open quantum system.The complete derivation process of n-qubit QST-OADM algorithm is given;Through strict theoretical proof and analysis,the convergence conditions to ensure any initial state of the quantum system to converge the target pure state are given.The proposed control method is applied to a 2-qubit stochastic open quantum system for numerical simulation experiments.Four possible different position cases between the initial estimated state and that of the controlled system are studied and discussed,and the performances of the state transition under the corresponding cases are analyzed.

The traps behind the failure of Malpasset arch dam,France,in 1959

The case of the Malpasset arch dam failure in 1959 has been widely exposed in scientifc and technical forums and papers.The focus here is on the many traps which have confused the whole chain of bodies and persons involved,owner,designer,geologist,contractor,up to the state management offcers.When the frst traps were hidden inside geology,many more appeared,as well geotechnical,technical,fortuitous,and administrative.In addition to such factual factors,human and organizational factors may be today easily identifed,when none of them was yet suspected.Both dam safety and rock mechanics benefted from the studies done since the Malpasset case,most of them within one decade.

Direct Yaw Moment Control for Distributed Drive Electric Vehicle Handling Performance Improvement

For a distributed drive electric vehicle（DDEV） driven by four in-wheel motors, advanced vehicle dynamic control methods can be realized easily because motors can be controlled independently, quickly and precisely. And direct yaw-moment control（DYC） has been widely studied and applied to vehicle stability control. Good vehicle handling performance： quick yaw rate transient response, small overshoot, high steady yaw rate gain, etc, is required by drivers under normal conditions, which is less concerned, however. Based on the hierarchical control methodology, a novel control system using direct yaw moment control for improving handling performance of a distributed drive electric vehicle especially under normal driving conditions has been proposed. The upper-loop control system consists of two parts： a state feedback controller, which aims to realize the ideal transient response of yaw rate, with a vehicle sideslip angle observer; and a steering wheel angle feedforward controller designed to achieve a desired yaw rate steady gain. Under the restriction of the effect of poles and zeros in the closed-loop transfer function on the system response and the capacity of in-wheel motors, the integrated time and absolute error（ITAE） function is utilized as the cost function in the optimal control to calculate the ideal eigen frequency and damper coefficient of the system and obtain optimal feedback matrix and feedforward matrix. Simulations and experiments with a DDEV under multiple maneuvers are carried out and show the effectiveness of the proposed method： yaw rate rising time is reduced, steady yaw rate gain is increased, vehicle steering characteristic is close to neutral steer and drivers burdens are also reduced. The control system improves vehicle handling performance under normal conditions in both transient and steady response. State feedback control instead of model following control is introduced in the control system so that the sense of control intervention to drivers is relieved.

The feedback control of fractional order unified chaotic system

This paper studies the stability of the fractional order unified chaotic system. On the unstable equilibrium points, the equivalent passivity＇＇ method is used to design the nonlinear controller. With the definition of fractional derivatives and integrals, the Lyapunov function is constructed by which it is proved that the controlled fractional order system is stable. With Laplace transform theory, the equivalent integer order state equation from the fractional order nonlinear system is obtained, and the system output can be solved. The simulation results validate the effectiveness of the theory.

Adaptive stabilization for cascade nonlinear systems

An adaptive controller of full state feedback for certain cascade nonlinear systems achieving input-to-state stability with respect to unknown bounded disturbance is designed using backstepping and control Lyapunov function (CLF) techniques. We show that unknown bounded disturbance can be estimated by update laws, which requires less information on unknown disturbance, as a part of stabilizing control. The design method achieves the desired property: global robust stability. Our contribution is illustrated with the example of a disturbed pendulum.

H_∞ drift control of time-delayed seismic structures

In this paper, an optimal H∞ control algorithm was applied to the design of an active tendon system installed at the first story of a multi-story building to reduce its interstory drift due to earthquake excitations. To achieve optimal control performance and to guarantee the stability of the control system, an optimum strategy to select control parameters γ and α was developed. Analytical expressions of the upper and the lower bounds of γ and α were obtained for a single degree-of-freedom system with state feedback control. The selection ranges for both γ and α are graphically defined so that the controlled system is always stable and the control performance is better than by the conventional LQR control algorithm. Numerical results from a controlled three-story building under real earthquake excitations demonstrate that the peak first interstory drift can be significantly reduced with maximum control force around 10% of the building weight. An optimum design flow chart was provided. In addition, for a time-delayed structure, this study gave explicit formulae to calculate the critical values of γ and a. The system stability and control performance can thus be guaranteed even with time delay.