A New Localization Scheme with Statistical Estimation against Wormhole Attack in Wireless Sensor Networks

Wormhole attack is one of the most devastating threats for range-free localization in wireless sensor networks. In this paper, we evaluate three statistical estimation methods with the same network model and geographic information obtailaed by the DV-Hop algorithm. We analyze the limits of Minimum Mean Square Estimate （MMSE）, Least Median of Squares （LMS） and Enhanced greedy At- tack-Resistant MMSE （EARMMSE） and propose an improved EARMMSE with the hop-distance relationship, named EARMMSE＋. Simulation results illustrate the performance of MMSE, LMS and EARMMSE＋ with different anchor fraction, the length of wormhole link and the average local neighborhood and show that EARMMSE＋ outperforms MMSE and LMS.

STUDY ON THE MULTIVARIATE STATISTICAL ESTIMATION OF TROPICAL CYCLONE INTENSITY USING FY-3 MWRI BRIGHTNESS TEMPERATURE DATA

A technique for estimating tropical cyclone(TC) intensity over the Western North Pacific utilizing FY-3Microwave Imager(MWRI) data is developed. As a first step, we investigated the relationship between the FY-3 MWRI brightness temperature(TB) parameters, which are computed in concentric circles or annuli of different radius in different MWRI frequencies, and the TC maximum wind speed(Vmax) from the TC best track data. We found that the parameters of lower frequency channels' minimum TB, mean TB and ratio of pixels over the threshold TB with a radius of 1.0 or 1.5 degrees from the center give higher correlation. Then by applying principal components analysis(PCA)and multiple regression method, we established an estimation model and evaluated it using independent verification data, with the RMSE being 13 kt. The estimated Vmax is always stronger in the early stages of development, but slightly weaker toward the mature stage, and a reversal of positive and negative bias takes place with a boundary of around 70 kt. For the TC that has a larger error, we found that they are often with less organized and asymmetric cloud pattern, so the classification of TC cloud pattern will help improve the acuracy of the estimated TC intensity, and with the increase of statistical samples the accuracy of the estimated TC intensity will also be improved.

DISTRIBUTED MONITORING SYSTEM RELIABILITY ESTIMATION WITH CONSIDERATION OF STATISTICAL UNCERTAINTY

Taking into account the whole system structure and the component reliability estimation uncertainty, a system reliability estimation method based on probability and statistical theory for distributed monitoring systems is presented. The variance and confidence intervals of the system reliability estimation are obtained by expressing system reliability as a linear sum of products of higher order moments of component reliability estimates when the number of component or system survivals obeys binomial distribution. The eigenfunction of binomial distribution is used to determine the moments of component reliability estimates, and a symbolic matrix which can facilitate the search of explicit system reliability estimates is proposed. Furthermore, a case of application is used to illustrate the procedure, and with the help of this example, various issues such as the applicability of this estimation model, and measures to improve system reliability of monitoring systems are discussed.

A Method for Surface Roughness Parameter Estimation in Passive Microwave Remote Sensing

Surface roughness parameter is an important factor and obstacle for retrieving soil moisture in passive microwave remote sensing.Two statistical parameters,root mean square (RMS) height (s) and correlation length (l),are designed for describing the roughness of a randomly rough surface.The roughness parameter measured by traditional way is independence of frequency,soil moisture and soil heterogeneity and just the ″geometric″ roughness of random surface.This ″geometric″ roughness can not fully explain the scattered thermal radiation by the earth's surface.The relationship between ″geometric″ roughness and integrated roughness (contain both ″geometric″ roughness and ″dielectric″ roughness) is linked by empirical coefficient.In view of this problem,this paper presents a method for estimating integrated surface roughness from radiometer sampling data at different frequencies,which mainly based on the flourier relationship between power spectral density distribution and spatial autocorrelation function.We can obtain integrated surface roughness at different frequencies by this method.Besides "geometric" roughness,this integrated surface roughness not only contains "dielectric" roughness but also includes frequency dependence.Combined with Q/H model the polarization coupling coefficient can also be obtained for both H and V polarization.Meanwhile,the simulated numerical results show that radiometer with a sensitivity of 0.1 K can distinguish the different surface roughness and the change of roughness with frequency for the same rough surface.This confirms the feasibility of radiometer sampling method for estimating the surface roughness theoretically.This method overcomes the problem of ″dielectric″ roughness measurement to some extent and can achieve the integrated surface roughness within a microwave pixel which can serve soil moisture inversion better than the ″geometric″ roughness.

Application of an Error Statistics Estimation Method to the PSAS Forecast Error Covariance Model

In atmospheric data assimilation systems, the forecast error covariance model is an important component. However, the paralneters required by a forecast error covariance model are difficult to obtain due to the absence of the truth. This study applies an error statistics estimation method to the Pfiysical-space Statistical Analysis System （PSAS） height-wind forecast error covariance model. This method consists of two components： the first component computes the error statistics by using the National Meteorological Center （NMC） method, which is a lagged-forecast difference approach, within the framework of the PSAS height-wind forecast error covariance model; the second obtains a calibration formula to rescale the error standard deviations provided by the NMC method. The calibration is against the error statistics estimated by using a maximum-likelihood estimation （MLE） with rawindsonde height observed-minus-forecast residuals. A complete set of formulas for estimating the error statistics and for the calibration is applied to a one-month-long dataset generated by a general circulation model of the Global Model and Assimilation Office （GMAO）, NASA. There is a clear constant relationship between the error statistics estimates of the NMC-method and MLE. The final product provides a full set of 6-hour error statistics required by the PSAS height-wind forecast error covariance model over the globe. The features of these error statistics are examined and discussed.

User Feedback Oriented Quality of Experience Management Framework

Recently,Quality of Experience(QoE)has been introduced as a subjective measure of a user’s experience of communication services.QoE was expected to take the place of traditional Quality of Service(QoS)measure in that QoE may express a direct and accurate user experience.In this paper,we propose a QoE management scheme which is based on a user’s simple feedback.We explain the proposed QoE management steps and the dominant reason extraction algorithm to determine the quality-falling instance.We also present a QoE prediction method that will provide an optimal quality management scheme in communication services.Experiments on multimedia streaming service prove the efficiency of the dominant factor extraction algorithm,and the experiment using the QoE prediction method present a very high accuracy.The QoE management scheme proposed in this paper can be generally adapted to any communication services,to increase the efficiency and effectiveness of quality management systems.

Effective condition numbers and small sample statistical condition estimation for the generalized Sylvester equation

Abstract In this paper, we investigate the effective condition numbers for the generalized Sylvester equation （AX - YB, DX - YE） = （C,F）, where A,D ∈ Rm×m B,E ∈ Rn×n and C,F ∈ Rm×n. We apply the small sample statistical method for the fast condition estimation of the generalized Sylvester equation, which requires （9（m2n ＋ mn2） flops, comparing with （-O（m3 ＋ n3） flops for the generalized Schur and generalized Hessenberg- Schur methods for solving the generalized Sylvester equation. Numerical examples illustrate the sharpness of our perturbation bounds.

Robust description and recognition of various viewpoint dynamic textures

The problem of recognizing natural scenes, such as water, smoke, fire, wind-blown vegetation and a flock of flying birds, is considered. These scenes exhibit the characteristic dynamic pattern, but have stochastic extent. They are referred to as dynamic texture（DT）. In reality, the diversity of DTs on different viewpoints and scales are very common, which also bring great difficulty to recognize DTs. In the previous studies, due to no considering of the deformable and transient nature of elements in DT, the motion estimation method is based on brightness constancy assumption,which seem inappropriate for aggregate and complex motions. A novel motion model based on relative motion in the neighborhood of two-dimensional motion fields is proposed. The estimation of non-rigid motion of DTs is based on the continuity equation, and then the local vector difference（LVD） is proposed to characterize DT local relative motion. Spatiotemporal statistics of the LVDs is used as the representation of DT sequences. Excellent performances of classifying all DTs in UCLA database demonstrate the capability of the proposed method in describing DT.

Reliability analysis of extended generalized inverted exponential distribution with applications

A general version of the inverted exponential distribution is introduced, studied and analyzed. This generalization depends on the method of Marshall-Olkin to extend a family of distributions. Some statistical and reliability properties of this family are studied. In addition, numerical estimation of the maximum likelihood estimate（MLE） parameters are discussed in details. As an application, some real data sets are analyzed and it is observed that the presented family provides a better fit than some other known distributions.

Estimation of maximum inclusion by statistics of extreme values method in bearing steel

A statistic method, statistics of extreme values （SEV）, was described in detail, which can esti mate the size of maximum inclusion in steel. The characteristic size of the maximum inclusion in a high clean bearing steel （GCrl5） was evaluated by this method, and the morphology and corn position of large inclusions found were analyzed by scanning electron microscopy （SEM）. When standard inspection area （S0） is 280 mm2, the characteristic size of the biggest inclusion found in 30 standard inspection area is 23.93 μm, and it has a 99.9% probability of the characteristic size of maximum inclusion predicted being no larger than 36.85μm in the experimental steel. SEM result shows that large inclusions found are mainly composed of CaS, calcium-aluminate and MgO. Compositing widely exists in large inclusions in high clean bearing steel. Compared with traditional evaluation method, SEV method mainly focuses on inclusion size, and the esti- mation result is not affected by inclusion types. SEV method is suitable for the inclusion eval uation of high clean bearing steel.

Stahel-Donoho kernel estimation for fixed design nonparametric regression models

This paper reports a robust kernel estimation for fixed design nonparametric regression models.A Stahel-Donoho kernel estimation is introduced,in which the weight functions depend on both the depths of data and the distances between the design points and the estimation points.Based on a local approximation,a computational technique is given to approximate to the incomputable depths of the errors.As a result the new estimator is computationally efficient.The proposed estimator attains a high breakdown point and has perfect asymptotic behaviors such as the asymptotic normality and convergence in the mean squared error.Unlike the depth-weighted estimator for parametric regression models,this depth-weighted nonparametric estimator has a simple variance structure and then we can compare its efficiency with the original one.Some simulations show that the new method can smooth the regression estimation and achieve some desirable balances between robustness and efficiency.

Efficient sampling methods for characterizing POIs on maps based on road networks

With the rapid development of location-based services, a particularly important aspect of start-up marketing research is to explore and characterize points of interest （PoIs） such as restaurants and hotels on maps. However, due to the lack of direct access to PoI databases, it is necessary to rely on existing APIs to query Pols within a region and calculate PoI statistics. Unfortunately, public APIs generally im- pose a limit on the maximum number of queries. Therefore, we propose effective and efficient sampling methods based on road networks to sample PoIs on maps and provide unbiased estimators for calculating PoI statistics. In general, the more intense the roads, the denser the distribution of PoIs is within a region. Experimental results show that compared with state-of-the-art methods, our sampling methods improve the efficiency of aggregate statistical estimations.