Buckling Optimization of Curved Grid Stiffeners through the Level Set Based Density Method

Stiffened structures have great potential for improvingmechanical performance,and the study of their stability is of great interest.In this paper,the optimization of the critical buckling load factor for curved grid stiffeners is solved by using the level set based density method,where the shape and cross section(including thickness and width)of the stiffeners can be optimized simultaneously.The grid stiffeners are a combination ofmany single stiffenerswhich are projected by the corresponding level set functions.The thickness and width of each stiffener are designed to be independent variables in the projection applied to each level set function.Besides,the path of each single stiffener is described by the zero iso-contour of the level set function.All the single stiffeners are combined together by using the p-norm method to obtain the stiffener grid.The proposed method is validated by several numerical examples to optimize the critical buckling load factor.

THE LAYOUT OPTIMIZATION OF STIFFENERS FOR PLATE-SHELL STRUCTURES

The plate-shell structures with stiffeners are widely used in a broad range of engineering structures. This study presents the layout optimization of stiffeners. The minimum weight of stiffeners is taken as the objective function with the global stiffness constraint. In the layout optimization, the stiffeners should be placed at the locations with high strain energy/or stress. Conversely, elements of stiffeners with a small strain energy/or stress are considered to be used inefficiently and can be removed. Thus, to identify the element efficiency so that most inefficiently used elements of stiffeners can be removed, the element sensitivity of the strain energy of stiffeners is introduced, and a search criterion for locations of stiffeners is presented. The layout optimization approach is given for determining which elements of the stiffeners need to be kept or removed. In each iterative design, a high efficiency reanalysis approach is used to reduce the computational effort. The present approach is implemented for the layout optimization of stiffeners for a bunker loaded by the hydrostatic pressure. The numerical results show that the present approach is effective for dealing with layout optimization of stiffeners for plate-shell structures.

A NEW DISPLACEMENT-TYPE STABILITY EQUATION AND GENERAL STABILITY ANALYSIS OF LAMINATED COMPOSITE CIRCULAR CONICAL SHELLS WITH TRIANGULAR GRID STIFFENERS

In this paper, based on the theory of Donnell-type shallow shell, a new displacement-type stability equations is first developed for laminated composite circular conical shells with triangular grid stiffeners by using the variational calculus and generalized smeared-stiffener theory. The most general bending stretching couplings, the effect of eccentricity of stiffeners are considered. Then, for general stability of composite triangular grid stiffened conical shells without twist coupling terms, the approximate formulas are obtained for critical external pressure by using Galerkin's procedure. Numerical examples for a certain C/E composite conical shells with inside triangular grid stiffeners are calculated and the results are in good agreement with the experimental data. Finally, the influence of some parameters on critical external pressure is studied. The stability equations developed and the formulas for critical external pressure obtained in this paper should be very useful in the astronautical engineering design.

Buckling analysis of functionally graded material(FGM) sandwich truncated conical shells reinforced by FGM stiffeners filled inside by elastic foundations

An analytical solution for buckling of an eccentrically stiffened sandwich truncated conical shell is investigated. The shell consists of two functionally graded material （FGM） coating layers and a core layer which are metal or ceramic subjected to an axial compressive load and an external uniform pressure. Shells are reinforced by stringers and rings, in which the material properties of shells and stiffeners are graded in the thickness direction following a general sigmoid law distribution. Two models of coated shell-stiffener arrangements are investigated. The change of the spacing between stringers in the meridional direction is taken into account. A couple set of three-variable- coefficient partial differential equations in terms of displacement components are solved by the Galerkin method. A closed-form expression for determining the buckling load is obtained. The numerical examples are presented and compared with previous works.

Nonlinear stability of functionally graded material(FGM)sandwich cylindrical shells reinforced by FGM stiffeners in thermal environment

In this paper, Donnell＇s shell theory and smeared stiffeners technique are improved to analyze the postbuckling and buckling behaviors of circular cylindrical shells of stiffened thin functionally graded material （FGM） sandwich under an axial loading on elastic foundations, and the shells are considered in a thermal environment. The shells are stiffened by FGM rings and stringers. A general sigmoid law and a general power law are proposed. Thermal elements of the shells and reinforcement stiffeners are considered. Explicit expressions to find critical loads and postbuckling load-deflection curves are obtained by applying the Galerkin method and choosing the three-term approximate solution of deflection. Numerical results show various effects of temperature, elastic foundation, stiffeners, material and geometrical properties, and the ratio between face sheet thickness and total thickness on the nonlinear behavior of shells.

Influence of local stiffeners and cutout shapes on the vibration and stability characteristics of quasi-isotropic laminates under hygro-thermo-mechanical loadings

The perforated stiffened panel is generally found as a sub-component of sophisticated structures.The fundamental purpose of this panel is to withstand against buckling under complicated loading and environmental conditions.Hence,an accurate knowledge of critical buckling behaviour of stiffened panels is very much essential for a reliable and lightweight structural design.In this paper,the focus is on quasi-laminated panels with different cutout shapes of various sizes and their responses to hygrothermal environments under nonlinearly varying edge loads and is compared with the locally stiffened panels.Towards this,the modelling of the panel and stiffener is done by adopting nine-noded heterosis plate elements and three noded beam elements respectively.The stiffener formulation is suitably modified in order to take the torsional effect also into consideration along with the effect of shear deformation.Initially,the plate and the stiffener elements are treated separately,and then the displacement compatibility is maintained between them by using the transformation matrix.For a given loading and geometric discontinuity,the stress distribution within the perforated panel is highly non-uniform in nature and hence a dynamic approach has been used to calculate buckling loads by adopting two sets of boundary conditions,one set for pre-buckling stress analysis and the second set for buckling analysis.Four different quasi-isotropic stacking sequences are deliberated in this work by varying different ply-orientation in each scheme.The study also addresses the effect of various parameters such as nonlinear loads,hygro-thermal loads,cutout size and shapes,position of cutout,stiffener parameters,stacking sequences,thickness of plate and boundary conditions.

Layout design of thin-walled structures with lattices and stiffeners using multi-material topology optimization

In this paper,the thin-walled structures with lattices and stiffeners manufactured by additive manufacturing are investigated.A design method based on the multi-material topology optimization is proposed for the simultaneous layout optimization of the lattices and stiffeners in thin-walled structures.First,the representative lattice units of the selected lattices are equivalent to the virtual homogeneous materials whose effective elastic matrixes are achieved by the energy-based homogenization method.Meanwhile,the stiffeners are modelled using the solid material.Subsequently,the multi-material topology optimization formulation is established for both the virtual homogeneous materials and solid material to minimize the structural compliance under mass constraint.Thus,the optimal layout of both the lattices and stiffeners could be simultaneously attained by the optimization procedure.Two applications,the aircraft panel structure and the equipment mounting plate,are dealt with to demonstrate the detailed design procedure and reveal the effect of the proposed method.According to numerical comparisons and experimental results,the thin-walled structures with lattices and stiffeners have significant advantages over the traditional stiffened thin-walled structures and lattice sandwich structures in terms of static,dynamic and anti-instability performance.

Stiffeners layout design of thin-walled structures with constraints on multi-fastener joint loads

The purpose of this paper is to present an extended topology optimization method for the stiffeners layout design of aircraft assembled structures. Multi-fastener joint loads and manufacturing constraints are considered simultaneously. On one hand, the joint loads are calculated and constrained within a limited value to avoid the failure of fasteners. On the other hand, the manufacturing constraints of the material distribution in the machining directions of stiffeners are implemented by an improved piecewise interpolation based on a beveled cut-surface. It is proven that the objective function is strictly continuous and differentiable with respect to the piecewise interpolation. The effects of the extended method with two different constraints are highlighted by typical numerical examples. Compared with the standard topology optimization, the final designs have clearly shown the layout of stiffeners and the joint loads have been perfectly constrained to a satisfying level.

Effect of Orthogonal Stiffeners on the Stability of Axially Compressed Steel Jacking Pipe

Load conditions for steel pipe-jacking are complex during the construction stage. The stability of steel jacking pipe has been an increasingly important problem as jacking forces, pipe diameters and jacking distances increase. However, there are no standards for pipe reinforcement, for prevention of buckling, or for remedying pipe that buckles when being jacked axially. Past experience suggests that stiffeners can effectively reinforce the structure. This study analyzes the effect of different stiffeners on the stability of steel jacking pipe under axial compression using finite element analysis. The results suggest that the stability of steel jacking pipe can be significantly improved by using orthogonal stiffeners, in terms of engineering costs and construction space inside the pipe. Based on current engineering practice, the application of orthogonal stiffeners is discussed. This study provides a useful reference for the design and construction of steel jacking pipe.

Protective performance of shear stiffening gel-modified foam against ballistic impact:Experimental and numerical study

As one of the most widely used personal protective equipment(PPE),body armors play an important role in protecting the human body from the high-velocity impact of bullets or projectiles.The body torso and critical organs of the wear may suffer severe behind-armor blunt trauma(BABT)even though the impactor is stopped by the body armor.A type of novel composite material through incorporating shear stiffening gel(STG)into ethylene-vinyl acetate(EVA)foam is developed and used as buffer layers to reduce BABT.In this paper,the protective performance of body armors composed of fabric bulletproof layers and a buffer layer made of foam material is investigated both experimentally and numerically.The effectiveness of STG-modified EVA in damage relief is verified by ballistic tests.In parallel with the experimental study,numerical simulations are conducted by LS-DYNA®to investigate the dynamic response of each component and capture the key mechanical parameters,which are hardly obtained from field tests.To fully describe the material behavior under the transient impact,the selected constitutive models take the failure and strain rate effect into consideration.A good agreement between the experimental observations and numerical results is achieved to prove the validity of the modelling method.The tests and simulations show that the impact-induced deformation on the human body is significantly reduced by using STG-modified EVA as the buffering material.The improvement of protective performance is attributed to better dynamic properties and more outstanding energy absorption capability of the composite foam.

裂纹加筋和缺口加筋对钢加筋板极限强度的影响

This paper numerically evaluates the effect of the crack position on the ultimate strength of stiffened panels.Imperfections such as notches and cracks in aged marine stiffened panels can reduce their ultimate strength.To investigate the effect of crack length and position,a series of nonlinear finite element analyses were carried out and two cases were considered,i.e.,case 1 with thin stiffeners and case 2 with thick stiffeners.In both cases,the stiffeners have the same cross-section area.To have a basis for comparison,the intact panels were modeled as well.The cracks and notches were in the longitudinal and transverse direction and were assumed to be in the middle part of the panel.The cracks and notches were assumed to be through the thickness and there is neither crack propagation nor contact between crack faces.Based on the numerical results,longitudinal cracks affect the behavior of the stiffened panels in the postbuckling region.When the stiffeners are thinner,they buckle first and provide no reserved strength after plate buckling.Thus,cracks in the stiffeners do not affect the ultimate strength in the case of the thinner stiffeners.Generally,when stiffeners are thicker,they affect the postbuckling behavior more.In that case,cracks in the stiffeners affect the buckling and failure modes of the stiffened panels.The effect of notch was also studied.In contrast to the longitudinal crack in stiffeners,a notch in the stiffeners reduces the ultimate strength of the stiffened panel for both slender and thick stiffeners.

Analyzing the Form-Finding of a Large-Span Transversely Stiffened Suspended Cable System: A Method Considering Construction Processes

The precise control of the shape of transversely stiffened suspended cable systems is crucial. However, existing form-finding methods primarily rely on iterative calculations that treat loads as fixed known conditions. These methods are inefficient and fail to accurately control shape results. In this study, we propose a form-finding method that analyzes the load response of models under different sag and stress levels, taking into account the construction process. To analyze the system, a structural finite element model was established in ANSYS, and geometric nonlinear analysis was conducted using the Newton-Raphson method. The form-finding analysis results demonstrate that the proposed method achieves precise control of shape, with a maximum shape error ranging from 0.33% to 0.98%. Furthermore, the relationships between loads and tension forces are influenced by the deformed shape of the structures, exhibiting significant geometric nonlinear characteristics. Meanwhile, the load response analysis reveals that the stress level of the self-equilibrium state in the transversely stiffened suspended cable system is primarily governed by strength criteria, while shape is predominantly controlled by stiffness criteria. Importantly, by simulating the initial tensioning process as an initial condition, this method solves for a counterweight that satisfies the requirements and achieves a self-equilibrium state with the desired shape. The shape of the self-equilibrium state is precisely controlled by simulating the construction process. Overall, this work presents a new method for analyzing the form-finding process of large-span transversely stiffened suspended cable system, considering the construction process which was often overlooked in previous studies.

Vibrational power flow of a finite cylindrical shell with discrete axial stiffeners

The structural wave power flows in an elastic finite cylindrical shell with discrete axial stiffeners are studied when a simple harmonic force is applied on it. The equations of motion of the shell are derived by using Flügge equation and Hamilton variational principle, and the responses of the shell are obtained. By use of the basic definition of the power flow, the characteristics of axial propagation of the power flow supplied by input structure and carried by different shell internal forces of a forced shell are investigated. The effects of parameters, such as relative location of driving force and stringer, driving force type and structural damping on the vibrational power flows in the shell, are discussed. These provide some theoretical bases for vibration control and noise reduction of this kind of structure.

带内部支撑结构的低压排汽缸气动性能分析

The static pressure recovery of low-pressure exhaust hood is important for the overall effectiveness of steam turbines.The tubular and plate stiffeners inside the exhaust contribute to the structural safety of exhaust,which affect the aerodynamic performance.Given the complicated exhaust model coupled with the last stage of turbine,this paper intends to investigate the aerodynamic performance of exhaust hood with individual stiffeners using highfidelity numerical simulations in order to figure out the corresponding effects.The results show that(1)the types of stiffeners have different effects on the aerodynamic performance;and(2)different installation positions and types of plate stiffeners have different effects on aerodynamic performance.The above investigations highlight the future demand regarding reasonable layout and quantity of stiffeners to improve the aerodynamic performance of exhaust as well as maintaining the structural safety.

Nonlinear coupling modeling and dynamics analysis of rotating flexible beams with stretching deformation effect

Dynamic coupling modeling and analysis of rotating beams based on the nonlinear Green-Lagrangian strain are introduced in this work.With the reservation of the axial nonlinear strain,there are more coupling terms for axial and transverse deformations.The discretized dynamic governing equations are obtained by using the finite element method and Lagrange’s equations of the second kind.Time responses are conducted to compare the proposed model with other previous models.The stretching deformation due to rotating motion is observed and calculated by special formulations under dynamic equilibrium.The stretching deformation and the change of the associated equilibrium position are taken into account to analyze the free vibration and frequency response of the rotating beams.Analytical and numerical comparisons show that the proposed model can provide reliable results,while the previous models may lead to imprecise results,especially in high-speed conditions.

Reliability assessment for serviceability limit states of stiffened deep cement mixing column-supported embankments

The reliability and deterministic analyses of wood-cored stiffened deep cement mixing and deep cement mixing column-supported embankments(referred to as WSCSE and DCSE,respectively)considering serviceability limit state requirements are presented in this paper.Random field theory was used to simulate the spatial variability of soil
cement mixing(SCM)material in which the adaptive Kriging Monte Carlo simulation was adopted to estimate the failure probability of a column
supported embankment(CSE)system.A new method for stochastically generating random values of unconfined compressive strength(qu)and the ratio(Ru)between the undrained elastic modulus and qu of SCM material based on statistical correlation data is proposed.Reliability performance of CSEs concerning changes in the mean(μ),coefficient of variation(CoV),and vertical spatial correlation length(θv)of qu and Ru are presented and discussed.The obtained results indicate that WSCSE can provide a significantly higher reliability level and can tolerate more SCM material spatial variability than DCSE.Some performance of DCSE and WSCSE,which can be considered satisfactory in a deterministic framework,cannot guarantee an acceptable reliability level from a probabilistic viewpoint.This highlights the importance and necessity of employing reliability analyses for the design of CSEs.Moreover,consideration of only μ and CoV of qu seems to be sufficient for reliability analysis of WSCSE while for DCSE,uncertainties regarding the Ru(i.e.both μ and CoV)and θv of qu cannot be ignored.

Assessment of the stiffened panel performance in the OTEC seawater tank design:Parametric study and sensitivity analysis

Ocean thermal energy conversion(OTEC)is a process of generating electricity by exploiting the temperature difference between warm surface seawater and cold deep seawater.Due to the high static and dynamic pressures that are caused by seawater circulation,the stiffened panel that constitutes a seawater tank may undergo a reduction in ultimate strength.The current paper investigates the design of stiffening systems for OTEC seawater tanks by examining the effects of stiffening parameters such as stiffener sizes and span-over-bay ratio for the applied combined loadings of lateral and transverse pressure by fluid motion and axial compression due to global bending moment.The ultimate strength calculation was conducted by using the non-linear finite element method via the commercial software known as ABAQUS.The stress and deformation distribution due to pressure loads was computed in the first step and then brought to the second step,in which the axial compression was applied.The effects of pressure on the ultimate strength of the stiffener were investigated for representative stiffened panels,and the significance of the stiffener parameters was assessed by using the sensitivity analysis method.As a result,the ultimate strength was reduced by approximately 1.5%for the span-over-bay ratio of 3 and by 7%for the span-over-bay ratio of 6.

Explicit Topology Optimization Design of Stiffened Plate Structures Based on the Moving Morphable Component(MMC)Method

This paper proposes an explicit method for topology optimization of stiffened plate structures.The present work is devoted to simultaneously optimizing stiffeners’shape,size and layout by seeking the optimal geometry parameters of a series of moving morphable components(MMC).The stiffeners with straight skeletons and the stiffeners with curved skeletons are considered to enhance the modeling and optimization capability of the current approach.All the stiffeners are represented under the Lagrangian-description framework in a fully explicit way,and the adaptive ground structure method,as well as dynamically updated plate/shell elements,is used to obtain optimized designs with more accurate analysis results.Compared with existing works,the proposed approach provides an explicit description of the structure.Thus,a stiffened plate structure with clear stiffener distribution and smooth geometric boundary can be obtained.Several numerical examples provided,including straight and curved stiffeners,hierarchical stiffeners,and a stiffened plate with a cutout,validate the effectiveness and applicability of the proposed approach.

Impact Damage Identification of Aluminum Alloy Reinforced Plate Based on GWO-ELM Algorithm

As a critical structure of aerospace equipment,aluminum alloy stiffened plate will influence the stability of spacecraft in orbit and the normal operation of the system.In this study,a GWO-ELM algorithm-based impact damage identification method is proposed for aluminum alloy stiffened panels to monitor and evaluate the damage condition of such stiffened panels of spacecraft.Firstly,together with numerical simulation,the experimental simulation to obtain the damage acoustic emission signals of aluminum alloy reinforced panels is performed,to establish the damage data.Subsequently,the amplitude-frequency characteristics of impact damage signals are extracted and put into an extreme learning machine(ELM)model to identify the impact location and damage degree,and the Gray Wolf Optimization(GWO)algorithm is employed to update the weight parameters of the model.Finally,experiments are conducted on the irregular aluminum alloy stiffened plate with the size of 2200 mm×500 mm×10 mm,the identification accuracy of impact position and damage degree is 98.90% and 99.55% in 68 test areas,respectively.Comparative experiments with ELM and backpropagation neural networks(BPNN)demonstrate that the impact damage identification of aluminum alloy stiffened plate based on GWO-ELM algorithm can serve as an effective way to monitor spacecraft structural damage.

Stiffened状态方程下γ-model方法跟踪二维多介质流动

在 Stiffened状态方程下 ,运用 Level-set方程跟踪界面运动变化 ,把界面捕捉的等效方程、Level-set函数和欧拉方程组耦合 ,求解包含比热比和材料参数的耦合形式的流体力学方程组。计算方法采用二阶精度 Wave-propagation算法 ,通过对气体 -液体两种流体的一维 Riemann问题、激波和气泡相互作用以及气液两种流体Richtmyer-Meshkov界面不稳定性问题进行数值模拟 ,抑制了不同介质界面两侧的非物理振荡。