New Approach to Detecting Phenoxyl Free Radicals Generated in Enzyme Reaction by Stopped-flow Spectrophotometry

A highly sensitive stopped-flow spectrophotometry kinetic method was proposed for quantification phenoxyl radicals based on their accelerating effect on the oxidation of nicotinamide adenine dinucleotide （NADH）. Phenoxyl radicals generated from as low as 1×10^-8 mol/L 2,4-DCP can be readily detected with the proposed method and the detecting limit was 2.5×10^-9 mol/L.

Kinetic-spectrophotometric determination of free cyanide by stopped-flow reversed flow injection analysis

A stopped-flow reversed flow injection method for the determination of free cyanide is proposed. Pyridine-barbituric acid mixture is injected in the flow system as reagent to form the colour species with cyanide. The flow is stopped when the reagent zone comes in the flow cell, where absorbance-time data are collected at 580nm wavelength. The linear range of the determination is 0.1 -10μg/ml CN-. The sampling rate is 60h-1 and the relative standard deviation is 1.6% (n=16) at 5.0 μg/ml CN-1 level. With satisfactory results, the proposed method was applied to the determination of free cyanide in wastewater without sample pretreatment.

dppm与CH_2Cl_2在Pd(OAc)_2作用下反应stopped-flow动态学研究

ｄｐｐｍ与ＣＨ２Ｃｌ２在Ｐｄ（ＯＡｃ）２作用下反应ｓｔｏｐｐｅｄ＿ｆｌｏｗ动态学研究韦凤萍黄永仁（华东师范大学分析测试中心上海２０００６１）汪汉卿（中国科学院物理研究所兰州７３００００关键词动态学Ｐｄ（ＯＡｃ）２ｄｐｐｍＣＨ２Ｃｌ２停－流中图分类号Ｏ...

Effects of sequential decay on collective flows and nuclear stopping power in heavy-ion collisions at intermediate energies

In this study, the rapidity distribution, collective flows, and nuclear stopping power in ^(197)Au+^(197)Au collisions at intermediate energies were investigated using the ultrarelativistic quantum molecular dynamics(UrQMD) model with GEMINI++ code. The UrQMD model was adopted to simulate the dynamic evolution of heavy-ion collisions, whereas the GEMINI++ code was used to simulate the decay of primary fragments produced by UrQMD. The calculated results were compared with the INDRA and FOPI experimental data. It was found that the rapidity distribution, collective flows, and nuclear stopping power were affected to a certain extent by the decay of primary fragments, especially at lower beam energies. Furthermore, the experimental data of the collective flows and nuclear stopping power at the investigated beam energies were better reproduced when the sequential decay effect was included.

用Stopped-flow光散射方法研究NaCl浓度对CTAB棒状胶束形态转变的影响

用Stopped-flow光散射方法研究NaCl浓度对CTAB（十六烷基三甲基溴化铵）棒状胶束形态转变的影响。对同一CTAB溶液体系增加盐浓度，或者保持盐浓度恒定条件下增加CTAB浓度，胶束形态都出现显著的从球状到棒状转变过程。

Stopped-Flow技术应用于烯烃聚合的研究

对Stopped-Flow技术应用于MgCl_2负载Ziegler催化体系的研究结果进行了综述,该技术能够将烯烃聚合反应控制在极短时间内(约0.1s),并且对于催化剂活性中心的研究有着十分重要的意义。

Simultaneous Determination of Samarium and Gadolinium by a Automated Stopped-flow Analyzer

The present paper contains the reaction mechanism of the rare earth complex with 2-(2-arsenophenylazo)-7-(2, 6-dichloro-4-fluoro-phenylazo)- 1, 8-dihydroxynaphthalene-3, 6-disulfonic acid (DCF-arsenazo) studied preliminarily with a fully automated stopped-flow analyzer. A method with a high sensitivity and selectivity is proposed for the simultaneous determination of samarium and gadolinium based on the differential kinetic reaction of the rare earth complex with DCF-arsenazo. Sm and Gd in their concentrated oxides were determined with the relative errors less than 6%.

Flow injection spectrophotometric determination of vitamin E in pharmaceuticals,milk powder and blood serum using potassium ferricyanide-Fe(Ⅲ) detection system

A simple and sensitive flow injection spectrophotometric method is reported for the determination of vitamin E using potassium ferricyanide-Fe(Ⅲ) detection system.In the presence of vitamin E,Fe(Ⅲ)/ferricyanide reduces.The in situ reduced ions are then reacted with unreduced portion of ferricyanide/Fe(Ⅲ) to make soluble Prussian blue,which is monitored at absorption wavelength of 735 nm.Linear calibration graph was obtained in the concentration range of 0.1-40μg mL^(-1).The relative standard deviations (n=4) were in the range of 1.1-3.6%,with limits of detection(3 s blank) of 0.04μg mL^(-1).The proposed method allowed 12 injections h^(-1).The method is applied to determine vitamin E in pharmaceuticals,infant milk and blood serum samples using hexane extraction with the recoveries in the range of 93±3 to 97.5±4%.The method is validated using certified reference materials SRM 968c for blood serum samples.

Mixed traffic flow modeling near Chinese bus stops and its applications

To determine how bus stop design influences mixed traffic operation near Chinese bus stops,a new theoretical method was developed by using additive-conflict-flows procedure.The procedure was extended from homogeneous traffic flow to mixed traffic flow.Based on the procedure and queuing theory,car capacity and speed models were proposed for three types of bus stops including curbside,bus bay and bicycle detour.The effects of various combinations of bus stop type,traffic volume,bus dwell time,and berth number on traffic operations were investigated.The results indicate that traffic volume,bus dwell time and berth number have negative effects on traffic operations for any type of bus stops.For different types of bus stops,at car volumes above approximately 200 vehicles per hour,the bus bay and bicycle detour designs provide more benefits than the curbside design.As traffic volume increases,the benefit firstly increases in uncongested conditions and then decreases in congested conditions.It reaches the maximum at car volumes nearly 1 100 vehicles per hour.The results can be used to aid in the selection of a preferred bus stop design for a given traffic volume in developing countries.

Reversed flow injection spectrophotometric determination of low residuals of chlorine dioxide in water using chlorophenol red

A novel, simple, rapid, sensitive and highly selective flow injection procedure for the spectrophotometric determination of chlorine dioxide in the presence of other chlorine species, viz,free chlorine, chlorite, chlorate and hypochlorite, is developed. The method is based on the discoloration reaction between chlorine dioxide and chlorophenol red and can overcome the shortcomings existed in direct spectrophotometric determination for chlorine dioxide owing to the serious interference of free and combined chlorine. The procedure gave a linear calibration graph over the range 0—0.71 mg/L of chlorine dioxide. With a detection limit of 0.024 mg/L and a sample throughput of 60 samples/h.

Flow-injection Determination of Cysteine,N-Acetyl Cysteine and Glutathione in Pharmaceuticals via Potassium Ferricyanide-Fe(Ⅲ) Spectrophotometric System

A simple flow injection spectrophotometric method is reported for the determination of cysteine,N-acetyl cysteine and glutathione based on the reduction of Fe（Ⅲ）/ferricyanide,the in situ reduced ions are reacted with unreduced portion of ferricyanide/Fe（Ⅲ） to form soluble Prussian blue,which is monitored at 735 nm.The calibration graphs are linear in the concentration ranges of（1―100）×10-6 mol/L for cysteine and N-acetyl cysteine,and（1―50）×10-6 mol/L for glutathione.The relative standard deviations of 1.8%,2.5% and 1.9% were found for eleven replicate analyses of 5×10-6 mol/L cysteine,N-acetyl cysteine and glutathione.The limits of detection（3σ blank） at 5×10-7 mol/L for cysteine,and 3×10-7 mol/L for N-acetyl cysteine and glutathione were obtained.The proposed method allowed 60 injections/h.The effects of common substances present in pharmaceuticals and human physiological fluids were examined.The method was applied to determining cysteine in pharmaceutical formulations with the recoveries in a range of 97% to 106% and the results obtained are agreed well with labeled values.

Flow-injection Spectrophotometric Determination of Uric Acid in Urine via Prussian Blue Reaction

A simple and sensitive flow injection（FI） spectrophotometric method was reported for the determination of uric acid based on the reduction of Fe（III）/ferricyanide in the presence of uric acid. The in situ reduced ions reacted with unreduced portion of ferricyanide/Fe（III） to form soluble Prussian blue, which was monitored at an absorption wavelength of 735 nm. The optimized conditions allow a linear calibration graph in a concentration range of 1―100 μmol/L. The relative standard deviation was in a range of 0.5%―2.5%, with a detection limit（3σ blank） of 0.3 μmol/L and a sampling frequency of 60 injection/h was obtained. The effect of common substances present in human physiological fluids on the determination of uric acid was examined. The method was applied to determining uric acid in human urine samples with the recoveries in a range of 96%―105%. The results agree well with those by spectrophotometric reference method at a confidence level of 95%. Spectrophotometric procedures for uric acid determination in clinical samples were reviewed briefly.

Collective flow and nuclear stopping in heavy ion collisions in Fermi energy domain

The effects of the in-medium nucleon-nucleon(NN) elastic cross section on the observables in heavy ion collisions in the Fermi energy domain are investigated within the framework of the ultrarelativistic quantum molecular dynamics model. The results simulated using medium correction factors of F=σ_(NN)^(in-medium)/σ_(NN)^(free)=0.2,0.3,0.5,and the density-and momentum-dependent factor obtained from the FU3 FP1 parametrization are compared with the FOPI and INDRA experimental data. It is found that the calculations using the correction factors F=0.2 and 0.5 reproduce the experimental data(i.e.,collective flow and nuclear stopping) at 40 and 150 MeV/nucleon, respectively. Calculations with the FU3 FP1 parametrization can best fit these experimental data. These conclusions can be confirmed in both^(197)Au+^(197)Au and^(129)Xe+^(120)Sn.

Flow-injection spectrophotometric determination of vanadium with malachite green oxalate by bromate in acidic and micellar medium

A flow injection method is proposed for determining vanadium（V）. The method is based on its catalytic effect on the oxidation of malachite green oxalate by bromate. The reaction was monitored spectrophotometrically by measuring malachite green oxalate absorbance at λmax = 625 nm. The reagents and manifold variables, which have influences on the sensitivity, were investigated and the optimum conditions were established. The optimized conditions made it possible to determine vanadium in the ranges of 10-140 ng/mL with a detection limit of 5.2 ng/mL and a sample rate of 20 ± 5 samples/h.

Mechanism of Flowing Stop of Al-Si Alloys in EPC Process

The effect of several casting parameters on flowability of aluminium alloys is studied.It is found that fluidity increases linearly with the increase of pouring temperature and casting section thickness;the latent heat of vaporization is one of the most important properties of polystyrene which influences the molten metal flow.Also the mechanism of metal flowing stop is studied by means of dumping tests.The results show that for pure aluminium and aluminium alloys with narrow freezing range the molten metal flowing is stopped when a solidification shell which has enough strength to resist the effective pressure head is formed at the flowing metal front.The mechanism of flowing stop is much different from that in the traditional green sand casting.

Normal and reverse flow injection-spectrophotometric determination of thiamine hydrochloride in pharmaceutical preparations using diazotized metoclopramide

Simple and sensitive normal and reverse flow injection methods for spectrophotometric determination of thiamine hydrochloride （THC） at the microgram level were proposed and optimized. Both methods are based on the reaction between THC and diazotized metoclopramide in alkaline medium. Beer＇s law was obeyed over the range of 10 300 and 2-90 ug/mL, the limits of detection were 2.118 and 0.839 ug/mL and the sampling rates were 80 and 95 injections per hour for normal and reverse flow injection methods respectively. The application of both methods to commercially available pharmaceuticals produced acceptable results. The flow system is suitable for application in quality control processes.

A New Macro Model for Traffic Flow on a Highway with Bus Stop

Based on the difference between the online bus stop and the offline bus stop, two macro models are developed to describe the two types of bus stops. The numerical results show that the two models can qualitatively reproduce some complex phenomena resulted by the two types of bus stops and that the otttine bus stop is more effective than the online bus stop when the initial density is relatively low.

连续流动-钼酸铵分光光度法测定土壤全磷

利用硫酸-高氯酸湿法消解土壤,采用连续流动分析仪直接测定消解液磷酸根含量,建立了高通量测定土壤全磷的实验方法。方法检测限6.0 mg·kg^(-1),土壤样品的加标回收率为85%~100%。将该方法用于土壤标准物质(GBW07405、GBW07406a)全磷含量测定,结果准确,相对标准偏差(RSD)分别为3.5%、4.5%(n=3)。方法具备无需调节待测液pH值、分析速度快、消耗试剂少、结果准确可靠等优点,适用于大批量土壤全磷的测定分析。

加速老化的无铬鞣革中游离苯胺的FIA-UV法分析

采用流动注射分析-紫外光谱法(FIA-UV),基于苯胺与亚硝酸盐在酸性条件下发生的重氮化反应及其在碱性条件下的偶合显色反应,实现苯胺的有效检测.通过实验参数的优化,确定495 nm为最大吸收波长,建立了苯胺质量浓度在0.002~2.0 mg/L范围内与峰高具有良好线性关系的模型(R^(2)=0.9997),检出限为1.62μg/L,重复性(RSD)为0.71%.该方法在加速老化后皮革萃取液中的应用表现出97.8%~103.8%的加标回收率,相较国标法具有更优的抗干扰能力和更高的检测精度.成功建立的苯胺检测新方法,为无铬鞣革产品的质量控制及环境监测提供了重要的技术支持,有助于提高公共健康和环境保护水平.

公交站点区域行人与非机动车交互行为建模与仿真

为研究公交站点区域行人和非机动车的冲突行为,在元胞自动机模型的基础上,首先,考虑激进型行人和混合非机动车流,通过行人穿越决策规则和非机动车避让规则耦合行人运动模型和非机动车运动模型,采用双向行人Blue模型模拟进出站行人的运动行为,采用改进的NaSch模型模拟非机动车的运动行为,建立公交站点区域行人与非机动车交互模型。然后,在北京市西单商场公交站B站台开展观测实验,微观层面展现行人和非机动车之间的交互作用,分析在不同流量构成下二者冲突演化规律以及进出站行人到达率、非机动车到达率对延误和冲突数的影响。研究结果表明,非机动车堵塞多发生在非机动车与行人刚开始的交互处,并向来车方向延伸。与进出站行人到达率相比,行人和非机动车延误受非机动车到达率影响更显著;在进出站行人比例为0.5时,行人和非机动车延误达到峰值;进站行人比例为1时,行人和非机动车延误比出站行人比例为1时延误小;在行人到达率一定时,冲突数随着非机动车达到率的增大而增加,当行人到达率较小时,冲突数呈缓慢地增长趋势,随着行人到达率的增大,冲突数增长率呈现先增大后减小的趋势。