Lake water storage change estimation and its linkage with terrestrial water storage change in the northeastern Tibetan Plateau

Tibetan Plateau(TP) lakes are important water resources,which are experiencing quick expansion in recent decades.Previous researches mainly focus on analyzing the relationship between terrestrial water storage(TWS) change and lake water storage(LWS) change in the total inner TP,it is still lack of researches about the spatial difference and the characteristic of sub-region in the inner TP.In this study,we estimated the area change of 34 lakes by using Landsat images in the northeastern TP during 1976–2013,and LWS change by using the Shuttle Radar Topography Mission(SRTM).The results suggested that LWS had shrunk from 1976 to 1994,and then expanded quickly until 2013.LWS had a serious decrease by 13.6 Gt during 1976–1994,and then it increased quickly by 35.4 Gt during 1994–2013.We estimated TWS change,soil moisture change,and permafrost degradation based on the satellite data and related models during 2003–2013.The results indicated that their changing rates were 1.86 Gt/y,0.22 Gt/y,and –0.19 Gt/y,respectively.We also calculated the change of groundwater based on the mass balance with a decreasing trend of –0.054 Gt/y.The results suggested that the cause of TWS change was the increase of LWS.We analyzed the cause of lake change according to water balance,and found that the primary cause of lake expansion was the increasing precipitation(80.7%),followed by glacier meltwater(10.3%) and permafrost degradation(9%).The spatial difference between LWS change and TWS change should be studied further,which is important to understand the driving mechanism of water resources change.

Water storage changes in North America retrieved from GRACE gravity and GPS data

As global warming continues,the monitoring of changes in terrestrial water storage becomes increasingly important since it plays a critical role in understanding global change and water resource management.In North America as elsewhere in the world,changes in water resources strongly impact agriculture and animal husbandry.From a combination of Gravity Recovery and Climate Experiment（GRACE） gravity and Global Positioning System（GPS） data,it is recently found that water storage from August,2002 to March,2011 recovered after the extreme Canadian Prairies drought between 1999 and 2005.In this paper,we use GRACE monthly gravity data of Release 5 to track the water storage change from August,2002 to June,2014.In Canadian Prairies and the Great Lakes areas,the total water storage is found to have increased during the last decade by a rate of 73.8 ± 14.5 Gt/a,which is larger than that found in the previous study due to the longer time span of GRACE observations used and the reduction of the leakage error.We also find a long term decrease of water storage at a rate of-12.0 ± 4.2 Gt/a in Ungava Peninsula,possibly due to permafrost degradation and less snow accumulation during the winter in the region.In addition,the effect of total mass gain in the surveyed area,on present-day sea level,amounts to-0.18 mm/a,and thus should be taken into account in studies of global sea level change.

Evaluating the weekly changes in terrestrial water storage estimated by two different inversion strategies in the Amazon River Basin

In this study,we estimated the weekly Gravity Recovery and Climate Experiment(GRACE)spherical harmonic(SH)solutions and regional mascon solutions using GRACE-based Geopotential Difference(GPD)data and investigated their abilities in retrieving terrestrial water storage(TWS)changes over the Amazon River Basin(ARB)from January 2003 to February 2013.The performance of the weekly GPD-SH and GPDmascon solutions was evaluated by comparing them with the weekly GFZ-SH solutions,Global Land Data Assimilation Systems(GLDAS)-NOAH hydrological model outputs,and monthly GFZ-SH,GPD-SH,and CSRmascon solutions in the spatio-temporal and spectral domains.The results demonstrate that the weekly GPD-SH and GPD-mascon present good consistency with the weekly GFZ-SH solutions and GLDAS-NOAH estimates in the spatio-temporal domains,but GPD-mascon presents stronger signal amplitudes and more spatial details.The comparison of the monthly average of weekly estimates and monthly solutions demonstrates that the weekly GPD-mascon and GFZ-SH with DDK1 filtering are close to the monthly CSRmascon and GFZ-SH solutions,respectively.However,the signal amplitudes of TWS changes from GPD-SH and GFZ-SH with 650 km Gaussian filtering are smaller than the monthly solutions,and the corresponding Root Mean Square Errors between the TWS change time series from the monthly average of weekly solutions and monthly estimates are 18.12 mm(GPD-mascon),18.81 mm(GFZ-SH-DDK1),24.93 mm(GPDSH-G650km),and 33.07 mm(GFZ-SH-G650km),respectively.Additionally,the TWS change time series derived from weekly solutions present more high-frequency time-varying information than monthly solutions.Furthermore,the 300 km Gaussian filtering can improve the signal amplitudes of TWS changes from the weekly GPD-SH solutions more than those with 650 km Gaussian filtering,but the corresponding noise level is higher.The weekly GPD-SH and GPD-mascon solutions can extend the application scopes of GRACE and provide good complements to the current GRACE monthly solutions.

Research on the Phase Change Solar Energy Fresh Air Thermal Storage System

In this article, a new kind of solar fresh air system is designed in order to realize the improvement of thermal efficiency by the integrated application of the PCMs and heat pipe technology. Under the adequate sunshine condition, the fresh air is directly delivered into the indoor environment after being heated by the solar collector. When the sun radiation is reduced, the heated air temperature can not satisfy the need of supply of air temperature.The main heat source is changed to phase change heat storage equipment instead of solar energy. The system adopt heat pipe for a high-efficiency and isothermal heat transfer which recover the shortcomings of PCMs such as： low coefficient of thermal conductivity and poor thermal efficiency. This article establishes the physical model of phase change solar energy fresh air thermal storage system and creates the mathematical model of its unsteady heat transfer to simulate and analyse the operation process by using Fluent software. The results of the study show that, compared to normal fresh air system, the phase change solar energy fresh air thermal storage system has a significant improvement in energy saving and indoor comfort level and will play an important role in the energy sustainable development.

Microencapsulation of stearic acid with polymethylmethacrylate using iron(Ⅲ) chloride as photo-initiator for thermal energy storage

Aiming to identify the validity of fabricating microencapsulated phase change material(PCM) with polymethylmethacrylate(PMMA) by ultraviolet curing emulsion polymerization method using iron(III) chloride as photoinitiator,SA/PMMA microcapsules were prepared and various techniques were employed to determine the ignition mechanism,structural characteristics and thermal properties of the composite.The results shown that the microcapsules containing SA with maximum percentage of 52.20 wt% formed by radical mechanism and only physical interactions existed in the components both in the prepared process and subsequent use.The phase change temperatures and latent heats of the microencapsulated SA were measured as 55.3 °C and 102.1 J·g^(-1) for melting,and 48.8 °C and 102.8 J·g^(-1) for freezing,respectively.Thermal gravimetric analysis revealed that SA/PMMA has good thermal durability in working temperature range.The results of accelerated thermal cycling test are all shown that the SA/PMMA have excellent thermal reliability and chemical stability although they were subjected 1000 melting/freezing cycles.In summary,the comparable thermal storage ability and good thermal reliability facilitated SA/PMMA to be considered as a viable candidate for thermal energy storage.The successful fabrication of SA/PMMA capsules indicates that ferric chloride is a prominent candidate for synthesizing PMMA containing PCM composite.

Effects of Forest Type and Urbanization on Carbon Storage of Urban Forests in Changchun, Northeast China

Rapid urbanization has led to dramatic changes in urban forest structures and functions, and consequently affects carbon(C) storage in cities. In this study, field surveys were combined with high resolution images to investigate the variability of C storage of urban forests in Changchun, Northeast China. The main objectives of this study were to quantify the C storage of urban forests in Changchun City, Northeast China and understand the effects of forest type and urbanization on C storage of urban forests. The results showed that the mean C density and the total C storage of urban forests in Changchun were 4.41 kg/m2 and 4.74 × 108 kg, respectively. There were significant differences in C density among urban forest types. Landscape and relaxation forest(LF) had the highest C density with 5.41 kg/m2, while production and management forest(PF) had the lowest C density with 1.46 kg/m2. These differences demonstrate that urban forest type is an important factor needed to be considered when the C storage is accurately estimated. Further findings revealed significant differences in different gradients of urbanization, and the mean C density decreased from the first ring(6.99 kg/m2) to the fourth ring(2.87 kg/m2). The total C storage increased from the first ring to the third ring. These results indicate that C storage by urban forests will be significantly changed during the process of urbanization. The results can provide insights for decision-makers and urban planners to better understand the effects of forest type and urbanization on C storage of urban forests in Changchun, and make better management plans for urban forests.

Polarization readout analysis for multilevel phase change recording by crystallization degree modulation

Four different states of Si15Sb85 and Ge2Sb2Te5 phase change memory thin films are obtained by crystallization degree modulation through laser initialization at different powers or annealing at different temperatures. The polarization characteristics of these two four-level phase change recording media are analyzed systematically. A simple and effective readout scheme is then proposed, and the readout signal is numerically simulated. The results show that a high-contrast polarization readout can be obtained in an extensive wavelength range for the four-level phase change recording media using common phase change materials. This study will help in-depth understanding of the physical mechanisms and provide technical approaches to multilevel phase change recording.

Enhanced Phase Change Heat Storage of Layered Backfill Body under Different Boundary Conditions

In view of the high temperature problem faced by mining activities,the coordinated mining of ore deposit and geothermal energy is a solution in line with the concept of green mining.The layered backfill body with finned double-pipe heat exchanger continuously exchanges heat with the surrounding thermal environment,which plays an effective role in gathering geothermal energy.In this paper,the heat storage process of each layered backfill body under different boundary conditions is simulated by Fluent.The results show the heat storage characteristic of layered backfill body can be significantly improved by adding fins to the double-pipe heat exchanger.On the whole,the heat storage effect of bottom layer backfill body(BLBB)is the best.The total heat storage capacity of top layer backfill body(TLBB),middle layer backfill body(MLBB)and BLBB with the finned double-pipe heat exchanger is 666.3 kJ,662.2 kJ,1003.0 kJ;1639.0 kJ,1760.8 kJ,1911.2 kJ and 1731.1 kJ,1953.3 kJ,1962.8 kJ respectively at 1 h,8 h and 24 h.This study explores the law of heat storage of layered backfill body under different boundary conditions and also expands the idea for layered backfill body to efficiently accumulate geothermal energy.

Estimation of water balance in the source region of the Yellow River based on GRACE satellite data

Water storage has important significance for understanding water cycles of global and local domains and for monitoring climate and environmental changes. As a key variable in hydrology, water storage change represents the sum of precipitation, evaporation, surface runoff, soil water and groundwater exchanges. Water storage change data during the period of 2003-2008 for the source region of the Yellow River were collected from Gravity Recovery and Climate Experiment （GRACE） satellite data. The monthly actual evaporation was estimated according to the water balance equation. The simulated actual evaporation was significantly consistent and correlative with not only the observed pan （20 cm） data, but also the simulated results of the version 2 of Simple Biosphere model. The average annual evaporation of the Tangnaihai Basin was 506.4 mm, where evaporation in spring, summer, autumn and winter was 130.9 mm, 275.2 mm, 74.3 mm and 26.1 mm, and accounted for 25.8%, 54.3%, 14.7% and 5.2% of the average annual evaporation, respectively, The precipitation increased slightly and the actual evaporation showed an obvious decrease. The water storage change of the source region of the Yellow River displayed an increase of 0.51 mm per month from 2003 to 2008, which indicated that the storage capacity has significantly increased, probably caused by the degradation of permafrost and the increase of the thickness of active layers. The decline of actual evaporation and the increase of water storage capacity resulted in the increase of river runoff.

Monthly gravity field recovery from GRACE orbits and K-band measurements using variational equations approach

The Gravity Recovery and Climate Experiment（GRACE） mission can significantly improve our knowledge of the temporal variability of the Earth＇s gravity field.We obtained monthly gravity field solutions based on variational equations approach from GPS-derived positions of GRACE satellites and K-band range-rate measurements.The impact of different fixed data weighting ratios in temporal gravity field recovery while combining the two types of data was investigated for the purpose of deriving the best combined solution.The monthly gravity field solution obtained through above procedures was named as the Institute of Geodesy and Geophysics（IGG） temporal gravity field models.IGG temporal gravity field models were compared with GRACE Release05（RL05） products in following aspects：（i） the trend of the mass anomaly in China and its nearby regions within 2005-2010; （ii） the root mean squares of the global mass anomaly during 2005-2010; （iii） time-series changes in the mean water storage in the region of the Amazon Basin and the Sahara Desert between 2005 and 2010.The results showed that IGG solutions were almost consistent with GRACE RL05 products in above aspects（i）-（iii）.Changes in the annual amplitude of mean water storage in the Amazon Basin were 14.7 ± 1.2 cm for IGG,17.1 ± 1.3 cm for the Centre for Space Research（CSR）,16.4 ± 0.9 cm for the GeoForschungsZentrum（GFZ） and 16.9 ± 1.2 cm for the Jet Propulsion Laboratory（JPL） in terms of equivalent water height（EWH）,respectively.The root mean squares of the mean mass anomaly in Sahara were 1.2 cm,0.9 cm,0.9 cm and 1.2 cm for temporal gravity field models of IGG,CSR,GFZ and JPL,respectively.Comparison suggested that IGG temporal gravity field solutions were at the same accuracy level with the latest temporal gravity field solutions published by CSR,GFZ and JPL.

Preparing and Studying of Phase Change Energy Storage Materials

The thermal energy storage phase change material used for building has been prepared with a few of fatty acids based on the principle of binary low eutectic point. The thermal behaviors such as phase transition temperature and enthalpy of compound energy storage material are researched through differential scanning calorimeter(DSC) and scanning electron microscope(SEM) . The results show that the thermal energy storage phase change composite material can be used in the wall panels well as its higher latent heat.

Synthesis and thermal properties of poly(styrene-co-acrylonitrile)-graft-polyethylene glycol copolymers as novel solid–solid phase change materials for thermal energy storage

A novel poly（styrene-co-acrylonitrile）-graft-polyethylene glycol （SAN-g-PEG） copolymer was synthesized as new solid-solid phase change materials （SSPCMs） by grafting PEG to the main chain of poly（styrene-co-acrylonitrile）. The chemical structure of the SAN-g-PEG was confirmed by the Fourier transform infrared （FT-IR） and proton nuclear magnetic resonance （1H NMR） spectroscopy techniques. The thermal energy storage properties and the storage durability of the SAN-g-PEG were investigated by differential scanning calorimetry （DSC）. The SAN-g-PEG was endowed with the solid- solid phase transition temperatures within the range of 23-36 ℃ and the latent heat enthalpy ranged from 66.8 kJ/kg to 68.3 kJ/kg. Thermal cycling tests revealed that the SAN-g-PEG kept great heat storage durability after 1000 thermal cycles. The thermal stability was evaluated by a thermal gravity analysis （TGA）, and the initial decomposition temperature （Td） of SAN-g-PEG is 350 ℃, which proves that the SAN-g-PEG possessed good thermal stabilitv.

Detecting the storage and change on topsoil organic carbon in grasslands of Inner Mongolia from 1980s to 2010s

Soil carbon sequestration and potential has been a focal issue in global carbon research. Under the background of global change, the estimation of the size as well as its change of soil organic carbon（SOC） storage is of great importance. Based on soil data from the second national soil survey and field survey during 2011–2012, by using the regression method between sampling soil data and remote sensing data, this paper aimed to investigate spatial distribution and changes of topsoil（0–20 cm） organic carbon storage in grasslands of Inner Mongolia between the 1980 s and 2010 s. The results showed that：（1） the SOC storage in grasslands of Inner Mongolia between the 1980 s and 2010 s was estimated to be 2.05 and 2.17 Pg C, with an average density of 3.48 and 3.69 kg C·m–2, respectively. The SOC storage was mainly distributed in the typical steppe and meadow steppe, which accounted for over 98% of the total SOC storage. The spatial distribution showed a decreased trend from the meadow steppe, typical steppe to the desert steppe, corresponding to the temperature and precipitation gradient.（2） SOC changes during 1982–2012 were estimated to be 0.12 Pg C, at 7.00 g C·m–2·yr–1, which didn＇t show a significant change, indicating that SOC storage in grasslands of Inner Mongolia remained relatively stable over this period. However, topsoil organic carbon showed different trends of carbon source/sink during the past three decades. Meadow steppe and typical steppe had sequestered 0.15 and 0.03 Pg C, respectively, served as a carbon sink; while desert steppe lost 0.06 Pg C, served as a carbon source. It appears that SOC storage in grassland ecosystem may respond differently to climate change, related to vegetation type, regional climate type and grazing intensity. These results might give advice to decision makers on adopting suitable countermeasures for sustainable grassland utilization and protection.

Novel and durable composite phase change thermal energy storage materials with controllable melting temperature

The development of high temperature phase change materials(PCMs)with great comprehensive performance is significant in the future thermal energy storage system.In this study,novel and durable Al-Si/Al_(2)O_(3)-Al N composite PCMs with controllable melting temperature were successfully synthesized by using pristine Al powder as raw material and tetraethyl orthosilicate as SiO_(2)source.The Al_(2)O_(3)shell and Al-Si alloy were in-situ produced via the substitution reaction between molten Al and SiO_(2).Importantly,the crack caused by the incomplete encapsulation of the Al_(2)O_(3)shell could repair itself by the nitridation reaction of internal molten Al and thereby forming a highly dense Al_(2)O_(3)-Al N composite shell.The produced dense Al_(2)O_(3)-Al N composite shell could significantly improve the thermal cycling stability of composite PCMs,and thus,the thermal storage density decrease of the Al-Si/Al_(2)O_(3)-Al N(59.8 J/g to77.7 J/g)was far less than that of the Al-Si/Al_(2)O_(3)(118.5 J/g)after 3000 thermal cycles.Moreover,the synthesized Al-Si/Al_(2)O_(3)-Al N still exhibited a controllable melting temperature(571.5-637.9℃),relatively high thermal storage density(105.6-150.7 J/g),great dimensional stability and structural stability after3000 thermal cycles.Hence,the synthesized Al-Si/Al_(2)O_(3)-Al N composite PCMs,as promising preferential thermal energy storage materials,can be stably used in the energy utilization efficiency improvement of various systems for more than 6 years.

Performance of a collector-storage solar air heating system for building mechanical ventilation preheating in the cold area

The application of solar thermal energy to preheat cold fresh air for mechanical ventilation could save a lot of energy and ensure the stable operation of the ventilation system.In this paper,a kind of collector-storage solar air heating system(CSSAHS),in which the thermal storage unit(TSU)is characterized by a dual S-channel for heat transfer,is proposed and the mathematical model for the integrated system was established.The model including the TSU,solar air collector,heat recovery device,and the fan was verified by an experimental study set up in a typical cold city in China.The model has been verified by experiments.The simulation results demonstrate that fresh air is the most important factor affecting storage/release efficiency.The increasing rate of heat release efficiency in the range of fresh air temperature-6-18°C is about 1.58%/°C.The solar heat collector area and the size of the TSU suitable for representative cities in cold regions are optimized based on multi-condition simulation analysis.The CSSAHS can preheat fresh air for 5 h after heat storage and the release efficiency is between 52 and 74%.Compared with other systems,the energy-saving rate of the CSSAHS is 26.5-33.3%in cold winter,and the heat supply ratio of the TSU is 24.4-35.1%.

Thermal Cycling Stability of Mg-25Al-15Zn-14Cu PCM

Thermal cycling tests of repeated melting/freezing processes were performed to check the thermal stability of Mg-25Al-15Zn-14 Cu alloy as phase change thermal storage material（PCM）. Latent heat storage capacity and phase transition temperature of the PCMs were determined by differential scanning calorimetry（DSC） technique as a function of repeated thermal cycles such as 0, 100, 200, and 1000. The present work also comprised the investigation of the density and microstructure of Mg-25Al-15Zn-14 Cu alloy before and after thermal cycles by using the hydrostatic method and optical microscopy（OM）, X-ray diffraction（XRD）, and electron probe microanalysis（EPMA）, respectively. The results show that the melting temperature of alloy after 1000 thermal cycles is 415.1 ℃ and the latent heat value is 190.4 J/g. Compared with the original alloy, the phase transition temperature will increase by 1.87% and the value of phase change latent heat will decrease by 7.35%, which are in a suitable range. Therefore, Mg-25Al-15Zn-14 Cu alloy has a good thermal reliability in terms of the change in its thermal properties with respect to thermal cycling for 1000, and can be used for a middle-temperature thermal storage utility.

Ka-Band CTDRSS Terminal Technology for Meeting the Needs of Launch Vehicle TT&C

To meet the application requirements for a Ka-band space-based TT&C terminal for a launch vehicle,this paper proposes the implementation scheme of a space-based TT&C terminal,analyzes and solves the miniaturized design of equipment and the key technology for high-efficiency heat dissipation.The phased array antenna test shows that without external heat dissipation measures,the phased array antenna can work for a long time to meet the working requirements of launch vehicle,which has been verified in the LM-8 mission,and has wide engineering application prospects.

Indexing the relationship between polar motion and water mass change in a giant river basin

Previous studies on the relationship between polar motion and water mass change have mainly concentrated on the excitation of polar motion via global terrestrial water storage changes(TWSC). In view of the uneven distribution of global terrestrial water storage, the relationship between regional water mass change and polar motion needs to be further explored owing to the lack of documented results. In addition, given the uncertainty in the estimation of TWSC, it is required to develop appropriate indices to describe water mass change from different perspectives. The Amazon River basin(referred to Amazon hereafter), containing the world's largest river, located at around the 90°W longitude, is selected as the study area. Water vapor flux, precipitation, runoff and TWSC are selected as the indices of water mass changes to reveal the relationship between polar motion and water mass change in this giant basin. The Mann-Kendall(M-K) method, the accumulated anomaly analysis method and the curvature method are used to identify the abrupt change points; the least squares method is used to estimate the trends,and the Fast Fourier Transform(FFT) and the Ensemble Empirical Mode Decomposition(EEMD) are used to perform a periodic analysis, for all the above indices. It is shown that, of all the indices from 1948 to 2011, water vapor flux is the most closely related index to polar motion. In detail, precipitation and water vapor flux contain beat periods of polar motion; water vapor flux,precipitation and polar motion have a common M-K test abrupt change point(occurring in ca. 1968) at the 0.05 significance level; water vapor flux has a similar accumulated anomaly curve with that of polar motion; and water vapor flux is more highly correlated with polar motion than most other indexes. It is found, just like global TWSC, the χ2 component of the excitation via water vapor flux and water storage change in the Amazon follows that of observed polar motion; χ1 does not follow. However, the pattern in the Amazon that the χ2 component of the excitation by water follows that of observed polar motion is at a more significant level than in global. Finally, the new index termed Location of Vapor-based Inter Tropical Convergence Zone(LVITCZ) we proposed to describe the annual mean latitudinal location of water mass change shows a more close and visual relationship between water mass change and polar motion than other chosen indices do.

Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage

This paper discusses composite materials based on inorganic salts for medium- and high-temperature thermal energy storage application. The composites consist of a phase change material （PCM）, a ceramic material, and a high thermal conductivity material. The ceramic material forms a microstructural skeleton for encapsulation of the PCM and structural stability of the composites; the high thermal conductivity material enhances the overall thermal conductivity of the composites. Using a eutectic salt of lithium and sodium carbonates as the PCM, magnesium oxide as the ceramic skeleton, and either graphite flakes or carbon nanotubes as the thermal conductivity enhancer, we produced composites with good physical and chemical stability and high thermal conductivity. We found that the wettability of the molten salt on the ceramic and carbon materials significantly affects the microstructure of the composites.

A one-step method for producing microencapsulated phase change materials

This short communication reports our recent work on the synthesis and characterisation ofmicrocapsules of phase change materials using silica as the shell material through a one-step method. The method uses no surfactants or dispersants for stabilising the capsules. The results show that the one-step method allows the tuning of the size and polydispersity of the capsules, and the use of different core materials. Analyses of the capsules show that they contain about 65% phase change materials. The results also suggest no need for a stabilising agent due to self-stabilisation by the amine groups. Further work is underway to investigate the mechanical and thermal properties of the microcapsules and the scale-up of the method.