期刊文献+
共找到58篇文章
< 1 2 3 >
每页显示 20 50 100
Reducing active layer thickness of polyamide composite membranes using a covalent organic framework interlayer in interfacial polymerization 被引量:5
1
作者 Meidi Wang Weixiong Guo +1 位作者 Zhongyi Jiang Fusheng Pan 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2020年第4期1039-1045,共7页
Polyamide(PA)-based thin-film composite membranes exhibit enormous potential in water purification,owing to their facile fabrication,decent performance and desirable stability.However,the thick PA active layer with hi... Polyamide(PA)-based thin-film composite membranes exhibit enormous potential in water purification,owing to their facile fabrication,decent performance and desirable stability.However,the thick PA active layer with high transport resistance from the conventional interfacial polymerization hampers their applications.The controllable fabrication of a thin PA active layer is essential for high separation efficiency but still challenging.Herein,a covalent organic framework TpPa-1 interlayer was firstly deposited on a polyethersulfone(PES)substrate to reduce the thickness of PA active layer in interfacial polymerization.The abundant pores of TpPa-1 increase the local concentration of amine monomers by adsorbing piperazine molecules,while hydrogen bonds between hydrophilic groups of TpPa-1 and piperazine molecules slow down their diffusion rate.Arising from those synergetic effects,the PA active layer is effectively reduced from 200 nm to 120 nm.By optimizing TpPa-1 interlayer and PA active layer,the water flux of resultant membranes can reach 171.35 L·m^-2·h^-1·MPa^-1,which increased by 125.4%compared with PA/PES membranes,while the rejection rates of sodium sulfate and dyes solution remained more than 90%and 99%,respectively.Our strategy may stimulate rational design of ultrathin PA-based nanofiltration membranes with high performances. 展开更多
关键词 Thin film composite membranes Interfacial polymerization Covalent organic frameworks interlayer NANOFILTRATION
下载PDF
Interlayer repair with porcine small intestinal submucosa versus internal repair with tragus cartilage in endoscopic tympanoplasty
2
作者 Lina Zhao Wenya Li Lei Zhang 《Laparoscopic, Endoscopic and Robotic Surgery》 2024年第2期79-86,共8页
Objective Endoscopic tympanoplasty includes various surgical methods,such as internal repair,interlayer repair,and external overlay.This technique requires autologous materials,allografts,and xenografts,which are used... Objective Endoscopic tympanoplasty includes various surgical methods,such as internal repair,interlayer repair,and external overlay.This technique requires autologous materials,allografts,and xenografts,which are used to repair tympanic membrane(TM)perforation.To obtain good results,appropriate surgical methods and repair materials should be selected.This study aims to assess the efficacy of repairing refractory TM perforations in the porcine small intestinal submucosa(SIS)during transcanal endoscopic type I tympanoplasty.Method A retrospective chart review was performed on patients who underwent TM perforation repair with porcine SIS and tragus cartilage between January 2022 and September 2022 at Sir Run Run Shaw Hospital,Zhejiang University School of Medicine.Perforation size,tympanic status,pre-and postoperative symptoms,follow-up data,wound healing rates,and hearing improvement were analysed.Results Of the 115 patients included in the study,56 underwent interlayer repair with porcine SIS of the TM,and 59 patients underwent internal repair with tragus cartilage.No significant difference was found between the two groups at baseline in terms of age,sex,disease course,perforation side,tympanic status,underlying disease,or preoperative infection.The total postoperative effective rate of interlayer implantation with porcine SIS was 91.07%(51 patients),and that of internal implantation with tragus cartilage was 88.14%(52 patients).No significant difference was found in terms of the graft success rate between the two surgical methods(p=0.887).Postoperative pure tone auditory(PTA)and air-bone gap(ABG)density significantly increased in both groups compared with before surgery(p<0.05).However,the postoperative PTA and ABG density were not significantly different 3 months post-surgery between the two groups(p>0.05).Compared to those in the internal implantation group,the patients in the interlayer group had a shorter operation duration(51.36±6.76 min vs.59.71±7.45 min,t=6.298,p<0.001)and less blood loss(11.91±2.61 mL vs.15.27±2.57 mL,t=7.019,p<0.001).Conclusions Our study suggests that the porcine SIS,as well as the tragus cartilage,has a high success rate in repairing irreversible TM perforation.Endoscopic tympanoplasty via interlayer implantation with porcine SIS offers distinct advantages,including the absence of donor-site incision and scar formation,and ease of graft modification and manipulation. 展开更多
关键词 Porcine small intestinal submucosa Tragus cartilage interlayer implantation Internal implantation Tympanic membrane Endoscopic tympanoplasty
下载PDF
Highly efficient separation of Sc^(3+) and Y^(3+) in acid solution by a graphene oxide membrane with interlayer sieving
3
作者 Huixiong Jiang Jin-Hang Liu +3 位作者 Xiudong Chen Xiaohua Cao Xiushen Ye Guosheng Shi 《Journal of Rare Earths》 SCIE EI CAS CSCD 2024年第11期2166-2171,I0006,共7页
Sc and Y are key rare earth elements and are widely used in lamp phosphors,lasers and high-performance alloys.However,highly efficient extraction and separation of Sc^(3+) and Y^(3+) is laborious,harmful,slow,and cost... Sc and Y are key rare earth elements and are widely used in lamp phosphors,lasers and high-performance alloys.However,highly efficient extraction and separation of Sc^(3+) and Y^(3+) is laborious,harmful,slow,and costly,strongly necessitating more efficient extraction and separation techniques.Here,we produced hydrated Sc^(3+)-and hydrated Y^(3+)-controlled graphene oxide(GO) membranes and find that both hydrated cations were completely self-rejected by the membrane.By combining this selfrejection effect of the larger hydrated Y^(3+)-controlled GO membrane and the rapid passage of the membrane through the smaller hydrated Sc^(3+),we proposed a strategy to separate Sc^(3+) and Y^(3+) by using a hydrated Y^(3+)-controlled GO membrane.The experimental results show that the permeation rate of Sc^(3+) exceeds that of Y^(3+) when the separation factor reaches 4.02,which can be attributed to the interlayer sieving effects of the GO membrane.Our finding illustrates the use of a forward osmosis process with a GO membrane for the efficient separation of Sc^(3+) and Y^(3+) by interlayer sieving,which provides a new effective and eco-friendly method for the separation of rare earth elements. 展开更多
关键词 Rare earths Graphene oxide membrane interlayer spacing membrane separation Forward osmosis
原文传递
Crown ether interlayer-modulated polyamide membrane with nanoscale structures for efficient desalination 被引量:2
4
作者 Yanyu Zhao Xiangju Song +2 位作者 Minghua Huang Heqing Jiang Arafat Toghan 《Nano Research》 SCIE EI CSCD 2023年第5期6153-6159,共7页
Nanoscale thin-film composite(TFC)polyamide membranes are highly desirable for desalination owing to their excellent separation performance.It is a permanent pursuit to further improve the water flux of membrane witho... Nanoscale thin-film composite(TFC)polyamide membranes are highly desirable for desalination owing to their excellent separation performance.It is a permanent pursuit to further improve the water flux of membrane without deteriorating the salt rejection.Herein,we fabricated a high-performance polyamide membrane with nanoscale structures through introducing multifunctional crown ether interlayer on the porous substrate impregnated with m-phenylenediamine.The crown ether interlayer can reduce the diffusion of amine monomers to reaction interface influenced by its interaction with m-phenylenediamine and the spatial shielding effect,leading to a controlled interfacial polymerization(IP)reaction.Besides,crown ether with intrinsic cavity is also favorable to adjust the IP process and the microstructure of polyamide layer.Since the outer surface of the nanocavity is lipophilic,crown ether has good solvency with the organic phase,thus attracting more trimesoyl chloride molecules to the interlayer and promoting the IP reaction in the confined space.As a result,a nanoscale polyamide membrane with an ultrathin selective layer of around 50 nm is obtained.The optimal TFC polyamide membrane at crown ether concentration of 0.25 wt.%exhibits a water flux of 61.2 L·m^(−2)·h^(−1),which is 364%of the pristine TFC membrane,while maintaining a rejection of above 97%to NaCl.The development of the tailor-made nanoscale polyamide membrane via constructing multifunctional crown ether interlayer provides a straightforward route to fabricate competitive membranes for highly efficient desalination. 展开更多
关键词 polyamide membrane nanoscale structures crown ether interlayer confined polymerization reverse osmosis
原文传递
Polydopamine/Imogolite Nanotubes(PDA/INTs)Interlayer Modulated Thin Film Composite Forward Osmosis Membrane for Minimizing Internal Concentration Polarization 被引量:1
5
作者 Jian-Chen Han Shao-Fei Wang +1 位作者 Ran Deng Qing-Yun Wu 《Chinese Journal of Polymer Science》 SCIE EI CAS CSCD 2022年第10期1233-1241,I0010,共10页
Forward osmosis(FO)as an energy-saving membrane process has attracted much attention in food concentration,water treatment,and desalination.Thin film composite(TFC)membrane is the most popular FO membrane,but it suffe... Forward osmosis(FO)as an energy-saving membrane process has attracted much attention in food concentration,water treatment,and desalination.Thin film composite(TFC)membrane is the most popular FO membrane,but it suffers from the internal concentration polarization(ICP),which significantly limits the water flux and FO efficiency.In this report,we demonstrate a novel and high-performing thin film nanocomposite(TFN)membrane that employs a hydrophilic interlayer composed of imogolite nanotubes(INTs)and polydopamine(PDA).The INTs can be adhered to the porous substrate by the self-polymerization of PDA,and the as-prepared PDA/INTs interlayer displays a nanostructured network with outstanding hydrophilicity.The detailed investigation was conducted to understand the relationship between the structure and property of the PDA/INTs interlayer and the morphology and performance of the TFN membrane.The TFN membrane with the PDA/INTs interlayer performs a thinner and smoother polyamide selective layer.Correspondingly,the TFN membrane shows a water flux of 18.38 L·m^(-2)·h^(-1),which is 2.18 times of the pristine TFC membrane.Moreover,the TFN membrane has a minimized structural parameter(577μm),almost a half of that of the pristine one(949μm).It reveals that the ICP effect of TFC membrane can be effectively alleviated by using a hydrophilic PDA/INTs interlayer.This TFN membrane with a satisfactory water permeability is promising in terms of future applications. 展开更多
关键词 interlayer Forward osmosis Internal concentration polarization NANOTUBE Thin film composite membrane
原文传递
Ion sieving in graphene oxide membranes via cationic control of interlayer spacing 被引量:1
6
《Science Foundation in China》 CAS 2017年第4期13-,共1页
With the support by the National Natural Science Foundation of China,a collaborative study by the research groups led by Prof.Fang Haiping(方海平)from Shanghai Institute of Applied Physics,Chinese Academy of Sciences,... With the support by the National Natural Science Foundation of China,a collaborative study by the research groups led by Prof.Fang Haiping(方海平)from Shanghai Institute of Applied Physics,Chinese Academy of Sciences,Prof.Wu Minghong(吴明红)from Shanghai Applied Radiation Institute。 展开更多
关键词 Ion sieving in graphene oxide membranes via cationic control of interlayer spacing
原文传递
Fabrication of novel thin-film composite membrane based on ultrathin metal-organic framework interlayer for enhancing forward osmosis performance
7
作者 Hao Liu Bo Li +5 位作者 Pin Zhao Rongming Xu Chuyang Y.Tang Weilong Song Zunaira Habib Xinhua Wang 《Chinese Chemical Letters》 SCIE CAS CSCD 2023年第12期305-309,共5页
To improve operation efficiency,an interlayered thin-film composite forward osmosis(iTFC-FO)membrane was designed by introducing an ultrathin and porous interlayer based on aluminum tetra-(4-carboxyphenyl)porphyrin(a ... To improve operation efficiency,an interlayered thin-film composite forward osmosis(iTFC-FO)membrane was designed by introducing an ultrathin and porous interlayer based on aluminum tetra-(4-carboxyphenyl)porphyrin(a stable metal-organic framework nanosheet,Al-MOF).Surface characterization results revealed that Al-MoF spread evenly in the macro-porous substrate,and provided a flat and smooth reaction interface with moderate hydrophilicity and uniform small aperture.The resultant polyamide(PA)layer had a thin base(without intrusion into substrate)and crumpled surface(with abundant leaves).The leaves size and cross-linking degree of PA layer firstly increased and then decreased with the Al-MOF loading.Compared to the original membrane,the iTFC-FO showed an enhanced water permeability and a reduced reverse sodium flux in both modes of active layer facing feed solution(ALFS)and active layer facing draw solution(AL-DS).To be specific,the specific reverse sodium flux(reverse sodium flux/pure water flux)decreased from 0.27 g/L to 0.04 g/L in the AL-FS mode,while from 1.36 g/L to 0.23 g/L in the AL-DS mode with 2 mol/L NaCl as DS.Moreover,the iTFC-FO maintained high stability and high permeability under high-salinity and contaminated environment.This study offers a new possibility for the rational fabrication of high-performance TFC-FO membranes. 展开更多
关键词 Thin-film composite embrane Forward osmosis 2Dmetal-organic ramework Porous interlayer membrane prformance
原文传递
两性离子中间层调控的纳滤膜制备及其脱盐性能
8
作者 王晓磊 余姜涛 +2 位作者 王齐 孔志云 魏俊富 《天津工业大学学报》 CAS 北大核心 2024年第5期16-23,共8页
为了打破纳滤膜的渗透性-选择性上限,制备兼具高渗透通量和高截留性能的薄层复合纳滤膜,首先在水解聚丙烯腈(HPAN)基膜表面沉积聚多巴胺/聚甲基丙烯酰乙基磺基甜菜碱(PDA/PSBMA)中间层,然后利用哌嗪(PIP)和均苯三甲酰氯(TMC)进行界面聚... 为了打破纳滤膜的渗透性-选择性上限,制备兼具高渗透通量和高截留性能的薄层复合纳滤膜,首先在水解聚丙烯腈(HPAN)基膜表面沉积聚多巴胺/聚甲基丙烯酰乙基磺基甜菜碱(PDA/PSBMA)中间层,然后利用哌嗪(PIP)和均苯三甲酰氯(TMC)进行界面聚合,制备聚酰胺(PA)层;对膜的化学结构、形貌和表面特性进行表征,研究纳滤膜的性能。结果表明:中间层亲水且带负电,对膜孔未造成严重堵塞,优化了界面聚合反应界面;聚酰胺层的厚度仅为65 nm左右,聚酰胺层内部及其与支撑层之间存在大量通道,使纳滤膜纯水渗透性高达21.82 L/(m^(2)·h·bar)(1 bar=100 kPa);纳滤膜对盐的截留顺序为Na_(2)SO_(4)(98.87%)>MgSO_(4)(96.92%)>MgCl_(2)(50.14%)>NaCl(30.60%),Na_(2)SO_(4)截留率基本不受操作压力和盐浓度的影响,NaCl和Na_(2)SO_(4)的分离因子为61.42;此外,纳滤膜具有良好的抗污染性和长期稳定性,在海水淡化、饮用水净化等领域具有应用潜力。 展开更多
关键词 聚多巴胺(PDA) 聚甲基丙烯酰乙基磺基甜菜碱(PSBMA) 两性离子中间层 纳滤膜 脱盐
下载PDF
MWCNTs/PEI杂化纳米纤维膜用于增韧液体成型CF/EP复合材料研究
9
作者 陈正国 杨青 吕玥蒽 《化工新型材料》 CAS CSCD 北大核心 2024年第9期94-98,103,共6页
为了研究不同浓度碳纳米管含量的多壁碳纳米管/聚醚酰亚胺(MWCNTs/PEI)杂化纳米纤维膜对于液体成型环氧树脂碳纤维复合材料的影响,本文制备了液体成型环氧树脂碳纤维复合材料进行实验。通过静电纺丝法制备碳纳米管/聚醚酰亚胺杂化纳米... 为了研究不同浓度碳纳米管含量的多壁碳纳米管/聚醚酰亚胺(MWCNTs/PEI)杂化纳米纤维膜对于液体成型环氧树脂碳纤维复合材料的影响,本文制备了液体成型环氧树脂碳纤维复合材料进行实验。通过静电纺丝法制备碳纳米管/聚醚酰亚胺杂化纳米纤维膜,系统研究碳纳米管含量对碳纤维/环氧树脂复合材料层间韧性和面内力学性能的影响,并分析性能与层间多级微观结构的关联机制。研究发现,适应VARI工艺的碳纳米管/聚醚酰亚胺杂化纳米纤维膜使复合材料I型层间断裂韧性得到改善。这可能与碳纳米管/聚醚酰亚胺杂化纳米纤维膜中聚醚酰亚胺通过原位溶解和固化诱导相分离在层间区域形成PEI相分离微球以及碳纳米管的起到钉扎,锚固效应和裂纹尖端分叉机制吸收更多的能量的作用,同时提高层间裂纹扩展阻力和改善层间树脂基体载荷转移能力的作用有关。 展开更多
关键词 MWCNTs/PEI杂化纳米纤维膜 层间增韧 环氧树脂 液体成型
下载PDF
耳内镜下夹层法鼓膜成形术治疗鼓膜大穿孔的效果及对鼓膜愈合、听力恢复的影响
10
作者 周永玲 曾传道 《临床医学研究与实践》 2024年第19期96-100,共5页
目的研究耳内镜下夹层法鼓膜成形术治疗鼓膜大穿孔的效果及对鼓膜愈合、听力恢复的影响。方法选取2021年1月至2022年1月我院收治的120例鼓膜大穿孔患者,根据治疗方法不同将其分为对照组和观察组,各60例。对照组采用显微镜下夹层法鼓膜... 目的研究耳内镜下夹层法鼓膜成形术治疗鼓膜大穿孔的效果及对鼓膜愈合、听力恢复的影响。方法选取2021年1月至2022年1月我院收治的120例鼓膜大穿孔患者,根据治疗方法不同将其分为对照组和观察组,各60例。对照组采用显微镜下夹层法鼓膜成形术,观察组采用耳内镜下夹层法鼓膜成形术。比较两组的治疗效果。结果观察组的鼓膜愈合总有效率为96.67%,略高于对照组的93.33%,但差异无统计学意义(P>0.05)。观察组的手术时间、术腔干耳时间及术腔上皮化时间短于对照组,术中出血量少于对照组,差异具有统计学意义(P<0.05)。治疗后,两组的气导听阈(AC)、骨导听阈(BC)及气骨导差(ABG)低于治疗前,差异具有统计学意义(P<0.05);治疗前、后,两组的AC、BC及ABG无明显差异(P>0.05)。观察组的并发症总发生率低于对照组,差异具有统计学意义(P<0.05)。治疗后,观察组的躯体表现、医学资源利用、情感异常、日常活动受限评分及总分高于对照组,差异具有统计学意义(P<0.05)。结论耳内镜与显微镜下夹层法鼓膜成形术对鼓膜大穿孔患者疗效相当,但耳内镜下夹层法鼓膜成形术可减少术中出血量,缩短手术时间、术腔干耳时间与上皮化时间,降低术后并发症发生率,改善患者生活质量。 展开更多
关键词 鼓膜大穿孔 耳内镜 夹层法鼓膜成形术 鼓膜愈合
下载PDF
CoPc(COOH)_8-SA/mCS双极膜的制备及表征 被引量:9
11
作者 陈日耀 陈震 +2 位作者 郑曦 陈晓 黄彩霞 《物理化学学报》 SCIE CAS CSCD 北大核心 2009年第12期2438-2444,共7页
分别用Fe3+离子和戊二醛作为交联剂对海藻酸钠(SA)阳膜层和壳聚糖(CS)阴膜层进行改性,制备了八羧基钴酞菁-海藻酸钠/改性壳聚糖(CoPc(COOH)8-SA/mCS)双极膜(BPM).在海藻酸钠阳膜层中添加八羧基钴酞菁以提高阳膜的离子交换容量,促进中间... 分别用Fe3+离子和戊二醛作为交联剂对海藻酸钠(SA)阳膜层和壳聚糖(CS)阴膜层进行改性,制备了八羧基钴酞菁-海藻酸钠/改性壳聚糖(CoPc(COOH)8-SA/mCS)双极膜(BPM).在海藻酸钠阳膜层中添加八羧基钴酞菁以提高阳膜的离子交换容量,促进中间层水的解离.用傅立叶红外(FT-IR)光谱、扫描电镜(SEM)等方法对制备的双极膜进行了表征.实验结果表明,经八羧基钴酞菁改性后,阳离子交换膜层的离子交换容量、H+离子透过率均获得提高.与Fe3+离子改性或二茂铁离子改性的mSA/mCS双极膜相比,CoPc(COOH)8-SA/mCS双极膜的交流阻抗、电阻压降(IR降)和溶胀度降低.当电流密度高达105mA·cm-2时,CoPc(COOH)8-SA/mCS双极膜的IR降仅为0.7V. 展开更多
关键词 双极膜 八羧基钴酞菁 海藻酸钠 壳聚糖 中间界面层 水解离
下载PDF
静电纺丝法制备PVA-SA-CuTsPc纳米纤维改性CMC-PVA/CS-PVA双极膜 被引量:5
12
作者 周挺进 陈晓 +2 位作者 陈日耀 郑曦 陈震 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2013年第1期166-170,共5页
分别用Fe3+离子和戊二醛作为交联剂对羧甲基纤维素钠(CMC)-聚乙烯醇(PVA)阳膜层和壳聚糖(CS)-聚乙烯醇阴膜层进行改性,利用静电纺丝法制备聚乙烯醇(PVA)-海藻酸钠(SA)-四磺酸基铜酞菁(CuTsPc)纳米纤维纺丝,引入中间界面层,制备CMC-PVA/P... 分别用Fe3+离子和戊二醛作为交联剂对羧甲基纤维素钠(CMC)-聚乙烯醇(PVA)阳膜层和壳聚糖(CS)-聚乙烯醇阴膜层进行改性,利用静电纺丝法制备聚乙烯醇(PVA)-海藻酸钠(SA)-四磺酸基铜酞菁(CuTsPc)纳米纤维纺丝,引入中间界面层,制备CMC-PVA/PVA-SA-CuTsPc/CS-PVA双极膜(BPM),并用扫描电镜、接触角测定仪,电流密度-槽电压关系曲线、交流阻抗谱等对制备的双极膜进行了表征。研究结果表明,经PVA-SA-CuTsPc纳米纤维纺丝改性后,CMC-PVA阳膜表面亲水性增强,双极膜的中间界面层水解离效率提高,膜阻抗和槽电压下降。当电流密度为90 mA/cm2时,CMC-PVA/PVA-SA-CuTsPc/CS-PVA(w(CuTsPc)=3.0%)双极膜的电阻压降(即膜IR降)仅为0.5 V。 展开更多
关键词 双极膜 静电纺丝 纳米纤维 中间界面层 水解离
下载PDF
应力吸收层沥青结合料特性研究 被引量:5
13
作者 张苛 罗要飞 +1 位作者 李志宏 张争奇 《合肥工业大学学报(自然科学版)》 CAS CSCD 北大核心 2013年第6期713-717,共5页
为了分析沥青结合料对应力吸收层性能的影响,保证应力吸收层发挥良好的功能,文章以SK90#基质沥青、SBS改性沥青和橡胶沥青为研究对象,对其进行常规试验和SHRP试验,分析了3种沥青的高低温性能、弹性恢复性能和抗疲劳性能。研究表明,胶粉... 为了分析沥青结合料对应力吸收层性能的影响,保证应力吸收层发挥良好的功能,文章以SK90#基质沥青、SBS改性沥青和橡胶沥青为研究对象,对其进行常规试验和SHRP试验,分析了3种沥青的高低温性能、弹性恢复性能和抗疲劳性能。研究表明,胶粉掺量为19%,高速搅拌时间为1h的橡胶沥青具有较强的高低温性能和抗老化性能,能很好满足应力吸收层的功能要求,是作为应力吸收层结合料的较佳选择。 展开更多
关键词 应力吸收层 橡胶沥青 常规试验 SHRP试验
下载PDF
应力吸收层沥青混合料性能研究 被引量:10
14
作者 汤文 盛晓军 孙立军 《建筑材料学报》 EI CAS CSCD 北大核心 2009年第2期173-176,180,共5页
采用2种Strata-T改性沥青,通过单轴贯入试验及复合车辙试验分析了应力吸收层(SAMI)沥青混合料的抗剪性能;通过0~25℃小梁弯曲试验及15,25℃疲劳试验,分析了SAMI沥青混合料在不同温度下的弯拉及疲劳性能;同时将SAMI沥青混合料与SBS改... 采用2种Strata-T改性沥青,通过单轴贯入试验及复合车辙试验分析了应力吸收层(SAMI)沥青混合料的抗剪性能;通过0~25℃小梁弯曲试验及15,25℃疲劳试验,分析了SAMI沥青混合料在不同温度下的弯拉及疲劳性能;同时将SAMI沥青混合料与SBS改性沥青混合料(AC5)的主要性能进行了对比分析.结果表明:设置SAMI的路面结构其抗车辙能力并不会显著降低,SAMI沥青混合料在0~25℃均具有很好的变形能力,并得到了SAMI沥青混合料的疲劳方程. 展开更多
关键词 应力吸收层(SAMI) 沥青加铺层 单轴贯入试验 等效温度 疲劳
下载PDF
橡胶沥青应力吸收层对路面防裂的影响 被引量:6
15
作者 高敏杰 李国芬 +1 位作者 高俊启 侯彦明 《南京林业大学学报(自然科学版)》 CAS CSCD 北大核心 2008年第6期151-153,共3页
应用有限元软件ANSYS,采用三维八节点固体单元有限元模型,分析了橡胶沥青应力吸收层的设置对路面防裂的影响,并探讨了应力吸收层的模量和厚度的合理取值。结果表明:设置橡胶沥青应力吸收层可以减少沥青面层在裂缝区的应力集中,增加路面... 应用有限元软件ANSYS,采用三维八节点固体单元有限元模型,分析了橡胶沥青应力吸收层的设置对路面防裂的影响,并探讨了应力吸收层的模量和厚度的合理取值。结果表明:设置橡胶沥青应力吸收层可以减少沥青面层在裂缝区的应力集中,增加路面结构的疲劳寿命,延长路面使用年限。 展开更多
关键词 橡胶沥青 应力吸收层 反射裂缝 半刚性基层 有限元
下载PDF
橡胶沥青应力吸收层力学与疲劳性能研究 被引量:25
16
作者 高俊启 季天剑 《实验力学》 CSCD 北大核心 2009年第4期341-346,共6页
防治反射裂缝是半刚性基层沥青路面新建或改建工程中的难题之一。橡胶沥青应力吸收层是一种较好的反射裂缝防治结构。本文设计了包含应力吸收层复合试件的剪切与疲劳试验,通过室内和现场取芯试件,研究了橡胶沥青应力吸收层及其他封层的... 防治反射裂缝是半刚性基层沥青路面新建或改建工程中的难题之一。橡胶沥青应力吸收层是一种较好的反射裂缝防治结构。本文设计了包含应力吸收层复合试件的剪切与疲劳试验,通过室内和现场取芯试件,研究了橡胶沥青应力吸收层及其他封层的力学和疲劳性能。聚酯玻纤布应力吸收层疲劳性能最好,但在较高橡胶沥青洒布量下,橡胶沥青与聚酯玻纤布应力吸收层疲劳性能接近;橡胶沥青应力吸收层的抗剪切变形能力最大,且其抗剪强度也比较高;橡胶沥青洒布量对橡胶沥青应力吸收层的抗剪强度、疲劳能力影响较大。当橡胶沥青洒布量在1.8-3.0kg/m^2间增加时,橡胶沥青应力吸收层的抗剪强度、疲劳能力均增加,但不是线性关系增加。 展开更多
关键词 应力吸收层 反射裂缝 橡胶沥青 力学性能 疲劳性能
下载PDF
应力吸收层沥青混合料的试验研究 被引量:11
17
作者 耿立涛 任瑞波 +1 位作者 郭玉清 常友功 《建筑材料学报》 EI CAS CSCD 北大核心 2012年第4期570-574,共5页
为研究沥青性能对应力吸收层沥青混合料路用性能的影响,通过室内试验测定了齐鲁70#道路石油沥青、复合改性沥青、橡胶沥青这3种沥青的技术指标,对设计的应力吸收层沥青混合料进行了高低温性能、水稳定性和疲劳性能评价,并得到了相应的... 为研究沥青性能对应力吸收层沥青混合料路用性能的影响,通过室内试验测定了齐鲁70#道路石油沥青、复合改性沥青、橡胶沥青这3种沥青的技术指标,对设计的应力吸收层沥青混合料进行了高低温性能、水稳定性和疲劳性能评价,并得到了相应的动态模量主曲线和相位角主曲线.结果表明,复合改性沥青和橡胶沥青用于应力吸收层具有良好的路用性能和力学性能,建议在实际应用中结合经济因素选用. 展开更多
关键词 应力吸收层 反射裂缝 复合改性沥青 橡胶沥青 砂粒式沥青混合料
下载PDF
碳纳米管中间层高性能正渗透复合膜的制备与研究 被引量:1
18
作者 周宗尧 胡云霞 +3 位作者 李金强 王群 安晓婵 王平 《膜科学与技术》 CAS CSCD 北大核心 2018年第3期34-40,47,共8页
为了制备兼具高通量和高盐截留的聚酰胺正渗透复合膜,采用喷涂的方法在传统聚砜基底制备构建超薄碳纳米管(CNTs)中间层,并在碳纳米管中间层表面界面聚合制备聚酰胺层.本文从聚酰胺复合膜的支撑层和活性层之间的界面调控入手,系统研究了C... 为了制备兼具高通量和高盐截留的聚酰胺正渗透复合膜,采用喷涂的方法在传统聚砜基底制备构建超薄碳纳米管(CNTs)中间层,并在碳纳米管中间层表面界面聚合制备聚酰胺层.本文从聚酰胺复合膜的支撑层和活性层之间的界面调控入手,系统研究了CNTs中间层对聚酰胺(PA)活性层生成过程和形貌结构的影响,并测试分析了CNTs中间层对聚酰胺复合膜正渗透性能的影响.实验结果表明,喷涂CNTs中间层的复合正渗透膜显著提升了水通量,在1mol/L的NaCl溶液作为汲取液的情况,复合膜在PRO模式下的平均水通量达33.27L/(m2·h),较未含有CNTs中间层的复合膜通量提升了55.18%,而且"净盐通量"下降了26.63%,仅为0.047g/L.通过构建碳纳米管(CNTs)中间层,大幅提升了聚酰胺复合正渗透膜的水通透性,同时并不牺牲复合膜的盐截留性能,克服了传统正渗透复合膜的水渗透-盐截留trade-off效应. 展开更多
关键词 正渗透膜 聚酰胺复合膜 中间层 碳纳米管
下载PDF
基于相对分子质量和热性质的改性沥青微观性能研究 被引量:4
19
作者 周燕 吉鹏飞 +2 位作者 张凯 李美东 管青海 《建筑材料学报》 EI CAS CSCD 北大核心 2018年第1期159-164,共6页
在90#基质沥青中加入一定比例的SBS,SBR,稳定剂和糠醛抽出油,分别制备成4种改性沥青并对其进行旋转薄膜烘箱试验和压力老化试验,得到短期老化和长期老化状态下的沥青样品.采用凝胶渗透色谱试验、差示扫描量热试验和热重试验,对改性沥青... 在90#基质沥青中加入一定比例的SBS,SBR,稳定剂和糠醛抽出油,分别制备成4种改性沥青并对其进行旋转薄膜烘箱试验和压力老化试验,得到短期老化和长期老化状态下的沥青样品.采用凝胶渗透色谱试验、差示扫描量热试验和热重试验,对改性沥青样品相对分子质量和热性质进行研究.结果表明:单掺SBR的改性沥青样品结构最不稳定,耐老化性能最差;稳定剂组和糠醛抽出油组改性沥青样品在老化过程中的大分子分解和小分子聚合得到了抑制,温度稳定性得到了提高;4种改性沥青样品在升温过程中质量损失主要分为小于200℃,200~420℃及420~550℃这3个阶段,其中第3个阶段反应最剧烈,质量损失速率最大. 展开更多
关键词 道路工程 应力吸收层改性沥青 热性质 热老化
下载PDF
应力吸收夹层沥青混合料设计研究 被引量:7
20
作者 吴旷怀 《公路交通科技》 CAS CSCD 北大核心 2006年第12期18-20,36,共4页
介绍了利用最大密实线设计混合料矿料级配,选用粘弹性高的SBS改性沥青,进行应力吸收夹层(SAMI)沥青混合料配合比设计的全过程,并对其各项性能进行了试验研究和分析。研究结果表明这种材料模量较小,变形能力强,具有良好的疲劳抵抗能力和... 介绍了利用最大密实线设计混合料矿料级配,选用粘弹性高的SBS改性沥青,进行应力吸收夹层(SAMI)沥青混合料配合比设计的全过程,并对其各项性能进行了试验研究和分析。研究结果表明这种材料模量较小,变形能力强,具有良好的疲劳抵抗能力和防水性能,可作为旧水泥混凝土加铺沥青层的应力吸收和防水夹层,以减少和延缓反射裂缝的发生,延长路面使用寿命。该技术在南柳高速公路和惠州博罗大道等沥青混凝土加铺工程中的实际应用取得了良好的效果。 展开更多
关键词 应力吸收夹层 沥青混合料 设计 研究
下载PDF
上一页 1 2 3 下一页 到第
使用帮助 返回顶部