Shelf-basin advection is essential to subsistence of the Arctic copepod Calanus hyperboreus population in high basin area. Its abundance, population structure and body size in pelagic layer were investigated with samp...Shelf-basin advection is essential to subsistence of the Arctic copepod Calanus hyperboreus population in high basin area. Its abundance, population structure and body size in pelagic layer were investigated with samples collected over a large range in the western Arctic Ocean during summer 2003, to evaluate the geographical variation in recruitment pattern. Calanus hyperboreus was absent from the shallow areas of the Chukchi Sea and most abundant in the slope area between the Chukchi Sea and Chukchi Abyssal Plain(CS-slope). Total abundance varied between 1 110.0 and 5 815.0 ind./m^2 in the CS-slope area and ranged from 40.0 to 950.0 ind./m^2 in the other areas. Early stages(CI–IV) dominated in the CS-slope area, whereas CV and adult females were frequently recorded only in deep basin areas. Geographical difference of prosome length was most evident in CIII,with average ranging from 2.48 to 2.61 mm at the CS-slope stations and 2.16–2.37 mm at the others. Abundance of early developmental stages(CI–CIV) correlated positively with Chl a concentration, but negative correlation was observed in late stages(CV–adult). Our results indicated that C. hyperboreus can benefit from primary production increase through accelerated development in the first growth season and the productive CS-slope area is a potential source for slope-basin replenishment.展开更多
The viscosities of a series of Cu–Ag melts in a temperature range from 1473 K to nearly liquid temperatures are measured by using an oscillating viscometer. At the same temperature, the value of viscosity increases f...The viscosities of a series of Cu–Ag melts in a temperature range from 1473 K to nearly liquid temperatures are measured by using an oscillating viscometer. At the same temperature, the value of viscosity increases first with silver content increasing, and reaches a maximum value at the eutectic component Cu40Ag60, then decreases. All the temperature dependences of the viscosities of Cu–Ag melts conform with the Arrhenius equation. The parameters of correlation length D of the studied Cu–Ag melts are calculated according to the experimental results of x-ray diffraction. The temperature dependence of correlation length D shows an exponential decay function, which is similar to the Arrhenius equation. Based on the values of viscosities and correlation length D, a direct correlation between viscosity and liquid structure is found for the investigated Cu–Ag melts through comparative analysis.展开更多
The behavior of a precracked bi-material structure interface under given static and dynamic axial loading is an interest object in the present paper.Firstly,it is shown that the shear-lag model is a proper tool to ana...The behavior of a precracked bi-material structure interface under given static and dynamic axial loading is an interest object in the present paper.Firstly,it is shown that the shear-lag model is a proper tool to analyze a delamination process in a precracked bi-material structure undergoing static loading.Secondly,the"shear-lag model"is applied to the structure under dynamic loading.To solve the problem for an interface delamination of the structure and to determine the debond length along the interface,our own 2D boundary element method(BEM)code is proposed in the case of static loading,and the shear-lag model together with the Laplace transforms and half-analytical calculations are used in the case of dynamic loading.The interface layer is assumed as a very thin plate compared with the other two.The parametric(geometric and elastic)analysis of the debond length and interface shear stress is done. The results from the 2D BEM code proved the validity of analytical solutions to the shear-lag model.In the dynamic case,the influence of loading characteristics,i.e.,frequencies and amplitude fluctuations on the shear stress and the value of debond length for an interval of time,is discussed. The analysis of the obtained results is illustrated by an example of the modern ceramic-metal composite,namely cermet, and depicted in figures.展开更多
To estimate the impact of crop rotation on the pathotype and genetic structure of Phythophthora sojae in fields, 372 isolates of P. sojae were obtained from long-term localisation experimental fields in Heilongjiang P...To estimate the impact of crop rotation on the pathotype and genetic structure of Phythophthora sojae in fields, 372 isolates of P. sojae were obtained from long-term localisation experimental fields in Heilongjiang Province of China. The hypocotyl inoculation method was used to characterize the virulence of P. sojae on 13 differential cultivars, and the amplified fragment length polymorphism(AFLP) technique was used to analyze difference in the genetic structure of P. sojae. The results indicated that an abundant diversity of genetic structures and pathotypes of P. sojae, a more uniform distribution of pathotypes and less dominance of pathotypes occurred in corn-soybean and wheat-soybean rotation fields than in a continuous soybean mono-cropping field. These findings suggested that P. sojae did not easily become the dominant race in rotation fields, which maintain disease resistance in soybean varieties. Therefore, the results of this study suggested that Phytophthora stem and root rot of soybeans could be effectively controlled by rotating soybeans with non-host crops of corn and wheat.展开更多
基金The National Natural Science Foundation of China under contract No.40406002the Public Science and Technology Research Funds Projects of Ocean under contract No.201105022
文摘Shelf-basin advection is essential to subsistence of the Arctic copepod Calanus hyperboreus population in high basin area. Its abundance, population structure and body size in pelagic layer were investigated with samples collected over a large range in the western Arctic Ocean during summer 2003, to evaluate the geographical variation in recruitment pattern. Calanus hyperboreus was absent from the shallow areas of the Chukchi Sea and most abundant in the slope area between the Chukchi Sea and Chukchi Abyssal Plain(CS-slope). Total abundance varied between 1 110.0 and 5 815.0 ind./m^2 in the CS-slope area and ranged from 40.0 to 950.0 ind./m^2 in the other areas. Early stages(CI–IV) dominated in the CS-slope area, whereas CV and adult females were frequently recorded only in deep basin areas. Geographical difference of prosome length was most evident in CIII,with average ranging from 2.48 to 2.61 mm at the CS-slope stations and 2.16–2.37 mm at the others. Abundance of early developmental stages(CI–CIV) correlated positively with Chl a concentration, but negative correlation was observed in late stages(CV–adult). Our results indicated that C. hyperboreus can benefit from primary production increase through accelerated development in the first growth season and the productive CS-slope area is a potential source for slope-basin replenishment.
基金Project supported by the Science and Technology Development Program of Shandong Province,China(Grant No.2011YD03099)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2014EL001)
文摘The viscosities of a series of Cu–Ag melts in a temperature range from 1473 K to nearly liquid temperatures are measured by using an oscillating viscometer. At the same temperature, the value of viscosity increases first with silver content increasing, and reaches a maximum value at the eutectic component Cu40Ag60, then decreases. All the temperature dependences of the viscosities of Cu–Ag melts conform with the Arrhenius equation. The parameters of correlation length D of the studied Cu–Ag melts are calculated according to the experimental results of x-ray diffraction. The temperature dependence of correlation length D shows an exponential decay function, which is similar to the Arrhenius equation. Based on the values of viscosities and correlation length D, a direct correlation between viscosity and liquid structure is found for the investigated Cu–Ag melts through comparative analysis.
文摘The behavior of a precracked bi-material structure interface under given static and dynamic axial loading is an interest object in the present paper.Firstly,it is shown that the shear-lag model is a proper tool to analyze a delamination process in a precracked bi-material structure undergoing static loading.Secondly,the"shear-lag model"is applied to the structure under dynamic loading.To solve the problem for an interface delamination of the structure and to determine the debond length along the interface,our own 2D boundary element method(BEM)code is proposed in the case of static loading,and the shear-lag model together with the Laplace transforms and half-analytical calculations are used in the case of dynamic loading.The interface layer is assumed as a very thin plate compared with the other two.The parametric(geometric and elastic)analysis of the debond length and interface shear stress is done. The results from the 2D BEM code proved the validity of analytical solutions to the shear-lag model.In the dynamic case,the influence of loading characteristics,i.e.,frequencies and amplitude fluctuations on the shear stress and the value of debond length for an interval of time,is discussed. The analysis of the obtained results is illustrated by an example of the modern ceramic-metal composite,namely cermet, and depicted in figures.
基金Supported by the Special Fund for Agro-scientific Research in the Public Interest(201303018)the National Natural Science Foundation of China(31370449)
文摘To estimate the impact of crop rotation on the pathotype and genetic structure of Phythophthora sojae in fields, 372 isolates of P. sojae were obtained from long-term localisation experimental fields in Heilongjiang Province of China. The hypocotyl inoculation method was used to characterize the virulence of P. sojae on 13 differential cultivars, and the amplified fragment length polymorphism(AFLP) technique was used to analyze difference in the genetic structure of P. sojae. The results indicated that an abundant diversity of genetic structures and pathotypes of P. sojae, a more uniform distribution of pathotypes and less dominance of pathotypes occurred in corn-soybean and wheat-soybean rotation fields than in a continuous soybean mono-cropping field. These findings suggested that P. sojae did not easily become the dominant race in rotation fields, which maintain disease resistance in soybean varieties. Therefore, the results of this study suggested that Phytophthora stem and root rot of soybeans could be effectively controlled by rotating soybeans with non-host crops of corn and wheat.