A physical value mapping (PVM) algorithm based on finite element mesh from the stamped part in stamping process to the product is presented, In order to improve the efficiency of the PVM algorithm, a search way from...A physical value mapping (PVM) algorithm based on finite element mesh from the stamped part in stamping process to the product is presented, In order to improve the efficiency of the PVM algorithm, a search way from the mesh of the product to the mesh of the stamped part will be adopted. At the same time, the search process is divided into two steps: entire search (ES) and local search (LS), which improve the searching efficiency. The searching area is enlarged to avoid missing projection elements in ES process. An arc-length method is introduced in LS process. The validity is confirmed by the results of the complex industry-forming product.展开更多
An efficient and reliable automated model that can map physical Soil and Water Conservation(SWC) structures on cultivated land was developed using very high spatial resolution imagery obtained from Google Earth and ...An efficient and reliable automated model that can map physical Soil and Water Conservation(SWC) structures on cultivated land was developed using very high spatial resolution imagery obtained from Google Earth and Arc GIS?ERDAS IMAGINE?and SDC Morphology Toolbox for MATLAB and statistical techniques. The model was developed using the following procedures:(1) a high-pass spatial filter algorithm was applied to detect linear features,(2) morphological processing was used to remove unwanted linear features,(3) the raster format was vectorized,(4) the vectorized linear features were split per hectare(ha) and each line was then classified according to its compass directionand(5) the sum of all vector lengths per class of direction per ha was calculated. Finallythe direction class with the greatest length was selected from each ha to predict the physical SWC structures. The model was calibrated and validated on the Ethiopian Highlands. The model correctly mapped 80% of the existing structures. The developed model was then tested at different sites with different topography. The results show that the developed model is feasible for automated mapping of physical SWC structures. Thereforethe model is useful for predicting and mapping physical SWC structures areas across diverse areas.展开更多
Aiming at the problem of abstract and polytype information modeling in product conceptual design, a method of conceptual modeling based on logical expression and evolvement is presented. Based on the logic expressions...Aiming at the problem of abstract and polytype information modeling in product conceptual design, a method of conceptual modeling based on logical expression and evolvement is presented. Based on the logic expressions of the product conceptual design information, a fimction/logic/strucmre mapping model is set up. First, the fimction semantics is transformed into logical expressions through fimction/logic mapping. Second, the methods of logical evolvement are utilized to describe the fimction analysis, fimction/strucmre mapping and structure combination. Last, the logical structure scheme is transformed into geometrical sketch through logic/structure mapping. The conceptual design information and modeling process are described uniformly with logical methods in the model, and an effective method for computer aided conceptual design based on the model is implemented.展开更多
Seismic data were integrated with well log to define the subsurface geometry and hydrocarbon trapping potential of Owem field, onshore Niger Delta. The research methodology involved horizon and fault interpretation to...Seismic data were integrated with well log to define the subsurface geometry and hydrocarbon trapping potential of Owem field, onshore Niger Delta. The research methodology involved horizon and fault interpretation to produce subsurface structural map. Wireline logs signatures were employed to identify hydrocarbon bearing sand and compute reservoir petrophysical parameters for hydrocarbon reservoir analysis. Two horizons HA and HB were identified and mapped and a time structural map was produced. Two reservoirs R1 and R2 were delineated in the wells A and B. The computed petrophysical parameters for well A showed that the thickness of Reservoir R1 and R2 are 11.5 and 12.5 meters respectively while the porosity and hydrocarbon saturation varies between 0.16 - 0.24 and 0.6 - 0.8 respectively. Similarly the average thickness and porosity of R1 and R2 for well B is about 18.0 meters and 0.12 while the hydrocarbon saturation varies between 0.7 - 0.8. The integration of seismic and well logs data has proved to be a useful tool in the reservoir analysis of hydrocarbon.展开更多
For understanding the Mesozoic tectonics of Yanshan (燕山 ) belt, the authors took geological mapping in the belt. A large-scale thrust structure was identified in Yonganpu (永安堡) area. in the western part of Su...For understanding the Mesozoic tectonics of Yanshan (燕山 ) belt, the authors took geological mapping in the belt. A large-scale thrust structure was identified in Yonganpu (永安堡) area. in the western part of Suizhong (绥中 ) County, Liaoning (辽宁 ) Province during our recent mapping in the Yanshan belt. The hanging wall of the thrust was composed of Archean gneiss and the overlying Early Cretaceous Zhangjiakou (张家口 ) Formation; meanwhile, the strongly ductile deformed volcanic rocks of Zhangjiakou Formation comprised the footwall in Yong'anpu tectonic window. This discovery indicates the existence of strongly contractional deformation in the Yanshan belt after the eruption of Early Cretaceous Zhangjiakou volcanic rocks. On the basis of mapping and research, it is concluded that the published official geological maps have failed to identify the major structural features of the Yanshan belt.展开更多
A maximum a posteriori( MAP) algorithm is proposed to improve the accuracy of super resolution( SR) reconstruction in traditional methods. The algorithm applies both joints image registration and SR reconstruction...A maximum a posteriori( MAP) algorithm is proposed to improve the accuracy of super resolution( SR) reconstruction in traditional methods. The algorithm applies both joints image registration and SR reconstruction in the framework,but separates them in the process of iteratiion. Firstly,we estimate the shifting parameters through two lowresolution( LR) images and use the parameters to reconstruct initial HR images. Then,we update the shifting parameters using HR images. The aforementioned steps are repeated until the ideal HR images are obtained. The metrics such as PSNR and SSIM are used to fully evaluate the quality of the reconstructed image. Experimental results indicate that the proposed method can enhance image resolution efficiently.展开更多
SINCE 1956, Michael’s continuous selection theory has been applied to functional analysis,topology, approximation theory and other mathematical fields. In this letter, the concept ofthe pseudo-lower semicontinuity is...SINCE 1956, Michael’s continuous selection theory has been applied to functional analysis,topology, approximation theory and other mathematical fields. In this letter, the concept ofthe pseudo-lower semicontinuity is introduced, and a convex structure of metric space is de-fined. A continuous selection theorem for pseudo-lower semicontinuity is given. This展开更多
The south-east of Cameroon encompasses a wide variety of geological structures among which we can cite the Congo Craton (CC), the Sanaga Fault (SF), the Yaoundé Domain, the Panafrican belt, the Protozoic series a...The south-east of Cameroon encompasses a wide variety of geological structures among which we can cite the Congo Craton (CC), the Sanaga Fault (SF), the Yaoundé Domain, the Panafrican belt, the Protozoic series and the Dja complex. The presence of all these structures justifies the great tectonic activity to which this area was subject from the rupture of Pangea to the creation of the different plates that exist today. In this work, we will bring out a high-resolution structural map of the study area by applying the qualitative analysis of the phase filters on 200,900 points of gravimetric data obtained from the combination of the XGM2016 and ETOPO1 models. Then, with these same data, we will bring out another structural map with the maxima method called Multi-Scale Horizontal Derivative of Vertical Derivative (MSHDVD) which will be compared to the first in order to show the limits of the MSHDVD method. To do this, we will first use the extension method to highlight the map of residual anomalies, then a combination of derivative, gradient and phase filters to highlight the geological structures responsible for fracturing in this area. Phase filters have the advantage that they make it possible to highlight all the geological edges responsible for the fracturing without taking into account the depth, while the MSHDVD method highlights the existing geological contacts (edges) at depths well defined by the examiner. The structural map obtained with the MSHDVD method shows that the major structural direction in this zone is W-E while that obtained from the interpretation of the phase filters is more precise and shows that the major structural direction in this area would be N-S and this result would be in perfect agreement with the tectonics of East Cameroon.展开更多
基金This project is supported by National Natural Science Foundation ofChina(No.l9832020) and National Outstanding Youth Science Foundation ofChina(No.10125208).
文摘A physical value mapping (PVM) algorithm based on finite element mesh from the stamped part in stamping process to the product is presented, In order to improve the efficiency of the PVM algorithm, a search way from the mesh of the product to the mesh of the stamped part will be adopted. At the same time, the search process is divided into two steps: entire search (ES) and local search (LS), which improve the searching efficiency. The searching area is enlarged to avoid missing projection elements in ES process. An arc-length method is introduced in LS process. The validity is confirmed by the results of the complex industry-forming product.
基金covered by the Swiss National Centre of Competence in Research North-South (NCCR North-South) program
文摘An efficient and reliable automated model that can map physical Soil and Water Conservation(SWC) structures on cultivated land was developed using very high spatial resolution imagery obtained from Google Earth and Arc GIS?ERDAS IMAGINE?and SDC Morphology Toolbox for MATLAB and statistical techniques. The model was developed using the following procedures:(1) a high-pass spatial filter algorithm was applied to detect linear features,(2) morphological processing was used to remove unwanted linear features,(3) the raster format was vectorized,(4) the vectorized linear features were split per hectare(ha) and each line was then classified according to its compass directionand(5) the sum of all vector lengths per class of direction per ha was calculated. Finallythe direction class with the greatest length was selected from each ha to predict the physical SWC structures. The model was calibrated and validated on the Ethiopian Highlands. The model correctly mapped 80% of the existing structures. The developed model was then tested at different sites with different topography. The results show that the developed model is feasible for automated mapping of physical SWC structures. Thereforethe model is useful for predicting and mapping physical SWC structures areas across diverse areas.
基金This project is supported by National Natural Science Foundation of China (No. 50405037)Provincial Natural Science Foundation of Zhejiang, China (No. Y105256)Specialized Research Fund for the Doctoral Program of Higher Education, China (No. 20040335060)
文摘Aiming at the problem of abstract and polytype information modeling in product conceptual design, a method of conceptual modeling based on logical expression and evolvement is presented. Based on the logic expressions of the product conceptual design information, a fimction/logic/strucmre mapping model is set up. First, the fimction semantics is transformed into logical expressions through fimction/logic mapping. Second, the methods of logical evolvement are utilized to describe the fimction analysis, fimction/strucmre mapping and structure combination. Last, the logical structure scheme is transformed into geometrical sketch through logic/structure mapping. The conceptual design information and modeling process are described uniformly with logical methods in the model, and an effective method for computer aided conceptual design based on the model is implemented.
文摘Seismic data were integrated with well log to define the subsurface geometry and hydrocarbon trapping potential of Owem field, onshore Niger Delta. The research methodology involved horizon and fault interpretation to produce subsurface structural map. Wireline logs signatures were employed to identify hydrocarbon bearing sand and compute reservoir petrophysical parameters for hydrocarbon reservoir analysis. Two horizons HA and HB were identified and mapped and a time structural map was produced. Two reservoirs R1 and R2 were delineated in the wells A and B. The computed petrophysical parameters for well A showed that the thickness of Reservoir R1 and R2 are 11.5 and 12.5 meters respectively while the porosity and hydrocarbon saturation varies between 0.16 - 0.24 and 0.6 - 0.8 respectively. Similarly the average thickness and porosity of R1 and R2 for well B is about 18.0 meters and 0.12 while the hydrocarbon saturation varies between 0.7 - 0.8. The integration of seismic and well logs data has proved to be a useful tool in the reservoir analysis of hydrocarbon.
基金This paper is financially supported by the National Natural Science Foundation of China (Nos .40572128 ,40376013 ,40104003) .
文摘For understanding the Mesozoic tectonics of Yanshan (燕山 ) belt, the authors took geological mapping in the belt. A large-scale thrust structure was identified in Yonganpu (永安堡) area. in the western part of Suizhong (绥中 ) County, Liaoning (辽宁 ) Province during our recent mapping in the Yanshan belt. The hanging wall of the thrust was composed of Archean gneiss and the overlying Early Cretaceous Zhangjiakou (张家口 ) Formation; meanwhile, the strongly ductile deformed volcanic rocks of Zhangjiakou Formation comprised the footwall in Yong'anpu tectonic window. This discovery indicates the existence of strongly contractional deformation in the Yanshan belt after the eruption of Early Cretaceous Zhangjiakou volcanic rocks. On the basis of mapping and research, it is concluded that the published official geological maps have failed to identify the major structural features of the Yanshan belt.
基金Supported by the National Natural Science Foundation of China(61405191)
文摘A maximum a posteriori( MAP) algorithm is proposed to improve the accuracy of super resolution( SR) reconstruction in traditional methods. The algorithm applies both joints image registration and SR reconstruction in the framework,but separates them in the process of iteratiion. Firstly,we estimate the shifting parameters through two lowresolution( LR) images and use the parameters to reconstruct initial HR images. Then,we update the shifting parameters using HR images. The aforementioned steps are repeated until the ideal HR images are obtained. The metrics such as PSNR and SSIM are used to fully evaluate the quality of the reconstructed image. Experimental results indicate that the proposed method can enhance image resolution efficiently.
文摘SINCE 1956, Michael’s continuous selection theory has been applied to functional analysis,topology, approximation theory and other mathematical fields. In this letter, the concept ofthe pseudo-lower semicontinuity is introduced, and a convex structure of metric space is de-fined. A continuous selection theorem for pseudo-lower semicontinuity is given. This
文摘The south-east of Cameroon encompasses a wide variety of geological structures among which we can cite the Congo Craton (CC), the Sanaga Fault (SF), the Yaoundé Domain, the Panafrican belt, the Protozoic series and the Dja complex. The presence of all these structures justifies the great tectonic activity to which this area was subject from the rupture of Pangea to the creation of the different plates that exist today. In this work, we will bring out a high-resolution structural map of the study area by applying the qualitative analysis of the phase filters on 200,900 points of gravimetric data obtained from the combination of the XGM2016 and ETOPO1 models. Then, with these same data, we will bring out another structural map with the maxima method called Multi-Scale Horizontal Derivative of Vertical Derivative (MSHDVD) which will be compared to the first in order to show the limits of the MSHDVD method. To do this, we will first use the extension method to highlight the map of residual anomalies, then a combination of derivative, gradient and phase filters to highlight the geological structures responsible for fracturing in this area. Phase filters have the advantage that they make it possible to highlight all the geological edges responsible for the fracturing without taking into account the depth, while the MSHDVD method highlights the existing geological contacts (edges) at depths well defined by the examiner. The structural map obtained with the MSHDVD method shows that the major structural direction in this zone is W-E while that obtained from the interpretation of the phase filters is more precise and shows that the major structural direction in this area would be N-S and this result would be in perfect agreement with the tectonics of East Cameroon.