Meter-Scale Thin-Walled Structure with Lattice Infill for Fuel Tank Supporting Component of Satellite:Multiscale Design and Experimental Verification

Lightweight thin-walled structures with lattice infill are widely desired in satellite for their high stiffness-to-weight ratio and superior buckling strength resulting fromthe sandwich effect.Such structures can be fabricated bymetallic additive manufacturing technique,such as selective laser melting(SLM).However,the maximum dimensions of actual structures are usually in a sub-meter scale,which results in restrictions on their appliance in aerospace and other fields.In this work,a meter-scale thin-walled structure with lattice infill is designed for the fuel tank supporting component of the satellite by integrating a self-supporting lattice into the thickness optimization of the thin-wall.The designed structure is fabricated by SLM of AlSi10Mg and cold metal transfer welding technique.Quasi-static mechanical tests and vibration tests are both conducted to verify the mechanical strength of the designed large-scale lattice thin-walled structure.The experimental results indicate that themeter-scale thin-walled structure with lattice infill could meet the dimension and lightweight requirements of most spacecrafts.

Suppression of Co(Ⅱ)ion deposition and hazards:Regulation of SEI film composition and structure

Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering them incapable of effectively inhibiting the exchange reaction between lithium ions and transition metal ions in the electrolyte.Consequently,nearly all lithium ions within the SEI film are replaced by transition metal ions,resulting in an increase in interphacial impedance and a decrease in stability.Herein,we demonstrate that the SEI film,constructed by fluoroethylene carbonate(FEC)additive rich in crystalline Li F,effectively inhibits the undesired Li^(+)/Co^(2+)ion exchange reaction,thereby suppressing the deposition of cobalt compounds and metallic cobalt.Furthermore,the deposited cobalt compounds exhibit enhanced structural stability and reduced catalytic activity with minimal impact on the interphacial stability of the graphite anode.Our findings reveal the crucial influence of SEI film composition and structure on the deposition and hazards associated with transition metal ions,providing valuable guidance for designing next-generation electrolytes.

Resistive switching behavior and mechanism of HfO_(x) films with large on/off ratio by structure design

Different bilayer structures of HfO_(x)/Ti(TiO_(x)) are designed for hafnium-based memory to investigate the switching characteristics. The chemical states in the films and near the interface are characterized by x-ray photoelectron spectroscopy,and the oxygen vacancies are analyzed. Highly improved on/off ratio(~104) and much uniform switching parameters are observed for bilayer structures compared to single layer HfO_(x) sample, which can be attributed to the modulation of oxygen vacancies at the interface and better control of the growth of filaments. Furthermore, the reliability of the prepared samples is investigated. The carrier conduction behaviors of HfO_(x)-based samples can be attributed to the trapping and de-trapping process of oxygen vacancies and a filamentary model is proposed. In addition, the rupture of filaments during the reset process for the bilayer structures occur at the weak points near the interface by the recovery of oxygen vacancies accompanied by the variation of barrier height. The re-formation of fixed filaments due to the residual filaments as lightning rods results in the better switching performance of the bilayer structure.

On-Chip Micro Temperature Controllers Based on Freestanding Thermoelectric Nano Films for Low-Power Electronics

Multidimensional integration and multifunctional com-ponent assembly have been greatly explored in recent years to extend Moore’s Law of modern microelectronics.However,this inevitably exac-erbates the inhomogeneity of temperature distribution in microsystems,making precise temperature control for electronic components extremely challenging.Herein,we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50×50μm^(2),which are fabricated from dense and flat freestanding Bi2Te3-based ther-moelectric nano films deposited on a newly developed nano graphene oxide membrane substrate.Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics.A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445μW,resulting in an ultrahigh temperature control capability over 100 K mW^(-1).Moreover,an ultra-fast cooling rate exceeding 2000 K s^(-1) and excellent reliability of up to 1 million cycles are observed.Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics.

Highly Thermally Conductive and Structurally Ultra‑Stable Graphitic Films with Seamless Heterointerfaces for Extreme Thermal Management

Highly thermally conductive graphitic film(GF)materials have become a competitive solution for the thermal management of high-power electronic devices.However,their catastrophic structural failure under extreme alternating thermal/cold shock poses a significant challenge to reliability and safety.Here,we present the first investigation into the structural failure mechanism of GF during cyclic liquid nitrogen shocks(LNS),which reveals a bubbling process characterized by“permeation-diffusion-deformation”phenomenon.To overcome this long-standing structural weakness,a novel metal-nanoarmor strategy is proposed to construct a Cu-modified graphitic film(GF@Cu)with seamless heterointerface.This well-designed interface ensures superior structural stability for GF@Cu after hundreds of LNS cycles from 77 to 300 K.Moreover,GF@Cu maintains high thermal conductivity up to 1088 W m^(−1)K^(−1)with degradation of less than 5%even after 150 LNS cycles,superior to that of pure GF(50%degradation).Our work not only offers an opportunity to improve the robustness of graphitic films by the rational structural design but also facilitates the applications of thermally conductive carbon-based materials for future extreme thermal management in complex aerospace electronics.

Explicit Topology Optimization Design of Stiffened Plate Structures Based on the Moving Morphable Component(MMC)Method

This paper proposes an explicit method for topology optimization of stiffened plate structures.The present work is devoted to simultaneously optimizing stiffeners’shape,size and layout by seeking the optimal geometry parameters of a series of moving morphable components(MMC).The stiffeners with straight skeletons and the stiffeners with curved skeletons are considered to enhance the modeling and optimization capability of the current approach.All the stiffeners are represented under the Lagrangian-description framework in a fully explicit way,and the adaptive ground structure method,as well as dynamically updated plate/shell elements,is used to obtain optimized designs with more accurate analysis results.Compared with existing works,the proposed approach provides an explicit description of the structure.Thus,a stiffened plate structure with clear stiffener distribution and smooth geometric boundary can be obtained.Several numerical examples provided,including straight and curved stiffeners,hierarchical stiffeners,and a stiffened plate with a cutout,validate the effectiveness and applicability of the proposed approach.

Effect of Plasma Treatment on the Structures and Properties of Konjac Glucomannan Film

To understand the effect of plasma treatment on the Konjac glucomannan film, the nitrogen plasma was injected into the film by ion beam injection machine in this study. The structures and properties of Konjac glucomannan film after plasma treatment were analyzed by Infrared spectroscopy, Raman spectrum, X-ray, ect. The result showed that nitrogen groups appeared in the KGM molecular chain and part of this chain fractured, and the number of hydrogen bonds increased after the treatment of plasma. The form of KGM molecule remained amorphous non-crystalline state, but the crystalline region was increased and became more ordered. The mechanical property of tensile strength and breaking elongation was improved, while the WVP was decreased. The nitrogen groups were grafted on the KGM molecular chain after plasma treatment, which led to the improvement of the properties of KGM film.

Effect of surfactants on the structure and photoelectric properties of ITO films by sol-gel method

The Indium tin oxide（ITO） thin film possesses excellent photoelectric properties that enable it to act as an ideal transparent conductor.To obtain high-quality ITO films through sol-gel method, the ionic surfactant monoethanolamine and the non-ionic surfactant polyethylene glycol（PEG） were added to the ITO precursor slurry.The influences of surfactants on the structural and photoelectric properties of ITO film samples were investigated.XRD patterns indicated that surfactant monoethanolamine contributed to film predominant grain orientation along the（400） plane.The high transmittance（over 95%） was attributed to the preferred orientation and the grain size expansion of ITO films.SEM showed that the surface particle size and the morphology of ITO films were strongly dependent on the kind of surfactants used.Moving to the shortwave region, the absorption edge of the films exhibited the Burstein-Moss shift.

Influence of Bath Temperature, Deposition Time and S/Cd Ratio on the Structure, Surface Morphology, Chemical Composition and Optical Properties of CdS Thin Films Elaborated by Chemical Bath Deposition

Cadmium sulphide (CdS) thin films were deposited on glass substrates by the chemical bath deposition (CBD) method, using anhydrous cadmium chloride (CdCl2) and thiourea (CS(NH2)2) as sources of cadmium and sulphur ions respectively. The influence of bath temperature (Tb), deposition time (td) aSnd [S]/[Cd] ratio in the solution on the structural, morphological, chemical composition and optical properties of these films were investigated. XRD studies revealed that all the deposited films were polycrystalline with hexagonal structure and exhibited (002) preferential orientation. The films deposited under optimum conditions (Tb = 75?C, td = 60 min and [S]/[Cd] ratio = 2.5) were relatively well crystallized. These films showed large final thickness and their surface morphologies were composed of small grains with an approximate size of 20 to 30 nm and grains grouped together to form large clusters. EDAX analysis revealed that these films were nonstoichiometric with a slight sulphur deficiency. These films exhibited also a transmittance value about 80% in the visible and infra red range.

Evolution of magnetic domain structure of martensite in Ni–Mn–Ga films under the interplay of the temperature and magnetic field

Ferromagnetic shape memory Ni-Mn-Ga films with 7M modulated structure were prepared on MgO （001） substrates by magnetron sputtering. Magnetization process with a typical two-hysteresis loop indicates the occurrence of the reversible magnetic field-induced reorientation. Magnetic domain structure and twin structure of the film were controlled by the in- terplay of the magnetic and temperature field. With cooling under an out-of-plane magnetic field, the evolution of magnetic domain structure reveals that martensitic transformation could be divided into two periods： nucleation and growth. With an in-plane magnetic field applied to a thermomagnetic-treated film, the evolution of magnetic domain structure gives evidence of a reorientation of twin variants of martensite. A microstructural model is described to define the twin structure and to produce the magnetic domain structure at the beginning of martensitic transformation; based on this model, the relationship between the twin structure and the magnetic domain structure for the treated film under an in-plane field is also described.

THE EFFECTS OF SPUTTERING POWER ON STRUCTURE AND ELECTRICAL PROPERTIES OF Cu FILMS

Cu films with thickness of about 500nm were deposited on glass substrateswithout heating by DC magnetron sputtering in pure Ar gas of 1.0Pa. The sputtering powers weremaintained at 390V X 0.27A, 430V X 0.70A and 450V X l.04A, and the corresponding deposition rates ofCu film reached 35nm/min, l04nm/min and 167nm/min. X-ray diffraction, scanning electron microscopyand atomic force microscopy were used to observe the structural characteristics of the films. Theresistance of the films was measured using four-point probe technique. The amount of larger grainsincreases and the resistivity of the films decreases evidently with an increase in sputtering power.It is considered that the increase in deposition rate with sputtering power mainly weakens theinfluence of residual gas atoms on the growing film, and increases substrate and gas temperatures,resulting in the increase in grain size and the decrease in resistivity of the Cu film.

Studies of Composition and Structure of CO_2 Corrosion Film of X56 Steel in the Medium of CO_2 and Salt Water

The X56 steel samples was corroded in the medium of salt water solution at the conditions of CO2 partial pressure POM 0.5 to 2.0 MPa, temperature 80 °C and flow rate 1.4m/s. Corrosion weigh loss, composition and structure, morphology and phase of corrosion films of the samples were investigate by SEM, EDS, XRD and XPS. The results indicated that the corrosion degree was accelerated with increasing POM ? The intense localised corrosion occurred on the surface of samples. The corrosion films mainly comprised of FeCO3 and complex phase products (Fe, Ca....)COj. There exists serious pitting on the metal substrates under the corrosion film. The theoretic and experimental analyses indicate this is caused by existed micropores or micro holes in films, which have the function of mass transportation.

Effects of Rapid Thermal Processing on Microstructure and Optical Properties of As-Deposited Ag2O Films by Direct-Current Reactive Magnetron Sputtering

（111） preferentially oriented Ag2O film deposited by direct current reactive magnetron sputtering is annealed by rapid thermal processing at different annealing temperatures for 5 min. The film microstructure and optical properties are then characterized by x-ray diffractometry, scanning electron microscopy, and spectrophotometry, respectively. The results indicate that no clear Ag diffraction peak is discernable in the Ag2O film annealed below 200°C. In comparison, the Ag2O film annealed at 200°C begins to exhibit characteristic Ag diffraction peaks, and in particular the Ag2O film annealed at 250°C can demonstrate enhanced Ag diffraction peaks. This implies that the threshold of the thermal decomposition reaction to produce Ag particles is approximately 200°C for the Ag2O film. In addition, an evolution of the film surface morphology from compact and pyramid-like to a rough and porous structure clearly occurred with increasing annealing temperature. The porous structure might be attributable to the escape of the oxygen produced during annealing, while the rough surface might originate from the reconstruction of the surface. The dispersion of interference peak intensity in the reflectance and transmission spectra could be attributed to the Ag particles produced. The lowered crystallinity and Ag particles produced induce a lattice defect, which results in an enhanced transmissivity in the violet region and a weakened transmissivity in the infrared region.

Effect of the Structure and Valence State on the Properties of VO_2 Thin Films

VO 2 thin films with good switching properties were prepared by controlling the annealing time and the annealing temperature in a vacuum system. The structural, optical and electrical properties of the samples were characterized by using XRD、XPS、UV-VIS and electrical measurements. The switching parameters of VO 2 thin film were investigated too. The results indicate that before and after phase transition the resistance of VO 2 thin films changes about three orders of magnitude, the variation of film transmittance of 40 % has been carried out with the absorptivity switching velocity of about 0.260 7 /min at 900 nm . The structural property of samples has been improved but the phase-transition properties have been decreased by increasing the annealing time and annealing temperature. The valence of V ions and the structure of samples have great effect on phase transition properties of VO 2 thin films. Discussion on the effects of annealing time and annealing temperature on the phase-transition temperature and hysteresis width shows that the best reasonable annealing time and annealing temperature can be achieved.

Structure and Magnetic Properties of the γ’-Fe4N Films on Cu Underlayers

The γ＇-Fe4N films on Cu underlayers are deposited on the glass and Si substrates by dc magnetron reactive sputtering. The effects of Cu underlayer on the structure, morphology and magnetic properties of the γ＇-Fe4N films are studied. The single-phase γ＇-Fe4N films with Cu underlayers on the glass substrate are obtained, while the mixture of Fe and γ＇-Fe4N is observed on the Si substrate. In comparison with the films without Cu underlayers, the grains of the films with Cu underlayers exhibit a non-uniform size distribution and give rise to a rougher surface. The magnetic measurements indicate that the γ＇-Fe4N films show a good soft ferromagnetic behavior. The enhanced coercivity in the films with Cu underlayers is observed due to the deterioration of the crystallographic structure as well as the rougher surface.

Features of the formation and nanostructure of the film with the basic hexagonal phase TiN_0.3by arc evaporation

Forming and nanostructuring processes of TiN film by electric arc evaporation under the conditions of the reactive nitrogen gas deficit in the gas mixture (30%) have been investigated. The results of a technological experiment, electron microscopic examination, X-ray diffraction phase analysis and mechanical testing of the film revealed that a significant increase in ion density and mobility leads to deterioration of the formation temperature conditions, structural and phase changes in TiN film and change of the main cubic phase (111)TiN on a hexagonal (101)TiN0.3. In the end repeated decrease of the the film microhardness with (101)TiN0.3 was caused not only by erosion of the film, but also because of change in the processes of its formation and nanostructuring in comparison with similar processes of the film with (111)TiN.

Morphology and Structure of SiO_2 Film Using Thermal Oxidation Process on(111)Silicon Crystals in Dry Oxygen Atmosphere

By means of scanning electron microscope(SEM)and high voltage electron microscope(HVEM)we have observed and analysed morphology and micro-structure of silicon oxide film with different thickness formed on(111)silicon monocrystal under dry oxygen atmosphere at 1100℃.Compared with their oxidation kinetic curves consisted of three stages,we suggested a mechanism on forming silicon oxide film.According to electron and X-ray diffraction analyses the silicon oxide films consisted of silica with different crystal structure.We also have discussed a stacking fault and a dislocation formed in the Si-Sio_2 interface region simulaneously forming silicon oxide film.

Preparation and Fluorescence Properties of Co-doped Nanocomposite Film Based on Supra Molecular Structure

为改善功能分了的特性,提出一种基于金属纳米粒子-偶氮染料复合物共掺杂超分子结构功能材料的设计新方法.并依照此方法制备出复合材料,观测了其显微结构,测量了其紫外-可见光吸收,研究了该超分子结构复合体系的荧光特性.实验发现,由于金属银纳米粒子的掺杂,使得超分子结构复合体系中功能分子甲基橙在溶液态体系的荧光强度增强近5倍,而在两种不同结构(共混结构和包覆结构)的薄膜态超分子结构体系中,其荧光强度分别被猝灭15%和20%.研究结果表明,复合膜中采用超分子结构完全能够改善功能分子的特性.

Application of PCA and HCA to the Structure-Activity Relationship Study of Fluoroquinolones

用密度泛函理论计算了12种具有抗肺炎链球菌的氟诺喹酮类药物分子的分子特性.利用主成分分析和分层聚类分析方法来简化氟诺喹酮类药物数据库的维数.主成分分析法表明,变量 E_(LUMO)、 Q_3、Q_5、Q_A、lgP、MR、VOL、ΔE_(HL)能够有效地对抗肺炎链球菌的氟诺喹酮类药物进行分类.分层聚类方法的结果和主成分分析方法的结果一致.这表明两种方法都能够对新的具有抗肺炎链球菌的氟诺喹酮类药物的分类提供一个可信的规律.利用主成分分析法和分层聚类分析法对其他6个氟诺喹酮类药物分子进行分析,结果都表明有两个药物分子具有较强的抗肺炎链球菌活性.此结果和临床结果相吻合.

Tackling application limitations of high-safetyγ-butyrolactone electrolytes:Exploring mechanisms and proposing solutions

Developing wide-temperature and high-safety lithium-ion batteries(LIBs)presents significant challenges attributed to the absence of suitable solvents possessing broad liquid range and non-flammability properties.γ-Butyrolactone(GBL)has emerged as a promising solvent;however,its incompatibility with graphite anode has hindered its application.This limitation necessitates a comprehensive investigation into the underlying mechanisms and potential solutions.In this study,we achieve a molecular-level understanding of the perplexing interphase formation process by employing in-situ spectroelectrochemical techniques and density function calculations.Our findings reveal that,even at high salt concentrations,GBL consistently occupies the primary Li^(+)solvation sheath,leading to extensive GBL decomposition and the formation of a high-impedance and inorganic-poor solid-electrolyte interphase(SEI)layer.Contrary to manipulating solvation structures,our research demonstrates that the utilization of filmforming additives with higher reduction potential facilitates the pre-establishment of a robust SEI film on the graphite anode.This approach effectively inhibits GBL decomposition and significantly enhances the battery's lifespan.This study provides the first reported intrinsic understanding of the unique GBLgraphite incompatibility and offers valuable insights for the development of wide-temperature and high-safety LIBs.