The influence of temperature, chloride ions and sulfide ions on the anticorrosion behavior of 316L stainless steel in simulated cooling water was studied by electrochemical impedance spectroscopy and anodic polarizati...The influence of temperature, chloride ions and sulfide ions on the anticorrosion behavior of 316L stainless steel in simulated cooling water was studied by electrochemical impedance spectroscopy and anodic polarization curves. The results show that the film resistance increases with the solution temperature but decreases after 8 days’ immersion, which indicates that the film formed at higher temperature has inferior anticorrosion behavior; Chloride ions and sulfide ions have remarkable effects on the electrochemical property of 316L stainless steel in simulated cooling water and the pitting potential declines with the concentration of chloride ions; the passivation current has no obvious effect; the rise of the concentration of sulfide ions obviously increases the passivation current, but the pitting potential changes little, which indicates that the two types of ions may have different effects on destructing passive film of stainless steel. The critical concentration of chloride ions causing anodic potential curve’s change in simulated cooling water is 250 mg/L for 316 L stainless. The effect of sulfide ions on the corrosion resistance behavior of stainless steel is increasing the passivation current density Ip. The addition of 6 mg/L sulfide ions to the solution makes Ip of 316 L increase by 0.5 times.展开更多
The novelty of this paper is the analysis in a medium containing sulfide ion due to the generation of this ion in petroleum industries, in the refining stage (the sulfide ion is also present on the produced water). Th...The novelty of this paper is the analysis in a medium containing sulfide ion due to the generation of this ion in petroleum industries, in the refining stage (the sulfide ion is also present on the produced water). The performance of 1-hydroxyethylidene-1,1-diphosphonic acid inhibitor (HEDP) was investigated by potentiodynamic polarization, electrochemical impedance spectroscopy, and weight loss measurements in a dissolution of AISI 304 stainless steel immersed in a solution containing chloride and sulfide ions. The protection of the stainless was increased with the addition of divalent cations (Ca<sup>2+</sup>, Zn<sup>2+</sup>, and Mg<sup>2+</sup>). Potentiodynamic polarization studies have shown that the inhibitor alone has anodic protection, but the addition of Ca<sup>2+</sup> (10 mg<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">·</span>L<sup>-1</sup>) favors the cathodic protection, and the addition of Zn<sup>2+</sup> (20 mg<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">·</span>L<sup>-1</sup>) and Mg<sup>2+</sup> (10 mg<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">·</span>L<sup>-1</sup>) mixed-type is observed. Electrochemical impedance spectroscopy was performed at three distinct potentials: -0.3 [V <i>vs.</i> SCE], <i>E</i><sub>corr</sub> [V <i>vs.</i> SCE], and 0.1 [V <i>vs.</i> SCE]. This revealed that calcium is responsible for favoring the formation of the film and the other elements (zinc and magnesium) favor the stabilization of the protective film. Scanning electron microscopy analysis revealed that the addition of cations provided the adsorption of HEDP on the metal surface. Weight loss results showed that the presence of zinc in a solution containing HEDP favored greater inhibitor efficiency (Zn<sup>2+</sup> <i>η</i><sub>m</sub> = 85.2% and for Mg<sup>2+</sup> <i>η</i><sub>m</sub> = 70.4%).展开更多
Two possible reaction mechanisms of VS^+(^3∑^-, 1^Г) with CO in the gas phase have been studied by using B3LYP/TZVP and CCSD(T)/6-311+G (3df, 3pd) methods: the O/S exchange reaction (VS^++CO→VO^++CS)...Two possible reaction mechanisms of VS^+(^3∑^-, 1^Г) with CO in the gas phase have been studied by using B3LYP/TZVP and CCSD(T)/6-311+G (3df, 3pd) methods: the O/S exchange reaction (VS^++CO→VO^++CS) and the S-transfer reaction (VS^+ + CO → V^+ + COS). The two reactions proceed via two-step and one-step mechanism, respectively. The barriers of the triplet and singlet PESs are 30.6 and 50.9 kcal/mol, respectively, for O/S exchange reaction and 7.3 and 50.2 kcal/mol, respectively, for the S-transfer reaction. The results indicate that the triplet ground state reaction is more favorable, and the S-transfer reaction is more favorable than the O/S exchange reaction, which is in good agreement with the experimental observation.展开更多
To meet the ever-increasing energy demands, advanced electrode materials are strongly requested for the exploration of advanced energy storage and conversion technologies, such as Li-ion batteries, Li-S batteries, Li-...To meet the ever-increasing energy demands, advanced electrode materials are strongly requested for the exploration of advanced energy storage and conversion technologies, such as Li-ion batteries, Li-S batteries, Li-]Zn-air batteries, supercapacitors, dye-sensitized solar cells, and other electrocatalysis process (e.g., oxygen reductionlevolution reaction, hydrogen evolution reaction). Transition metal chalcogenides (TMCs, Le., sulfides and selenides) are forcefully considered as an emerging candidate, owing to their unique physical and chemical properties. Moreover, the integration of TMCs with conductive graphene host has enabled the significant improvement of electrochemical performance of devices. In this review, the recent research progress on TMC]graphene composites for applications in energy storage and conversion devices is summarized. The preparation process of TMC]graphene nanocomposites is also included. In order to promote an in-depth understanding of performance improvement for TMC/graphene materials, the operating principle of various devices and technologies are briefly presented. Finally, the perspectives are given on the design and construction of advanced electrode materials.展开更多
文摘The influence of temperature, chloride ions and sulfide ions on the anticorrosion behavior of 316L stainless steel in simulated cooling water was studied by electrochemical impedance spectroscopy and anodic polarization curves. The results show that the film resistance increases with the solution temperature but decreases after 8 days’ immersion, which indicates that the film formed at higher temperature has inferior anticorrosion behavior; Chloride ions and sulfide ions have remarkable effects on the electrochemical property of 316L stainless steel in simulated cooling water and the pitting potential declines with the concentration of chloride ions; the passivation current has no obvious effect; the rise of the concentration of sulfide ions obviously increases the passivation current, but the pitting potential changes little, which indicates that the two types of ions may have different effects on destructing passive film of stainless steel. The critical concentration of chloride ions causing anodic potential curve’s change in simulated cooling water is 250 mg/L for 316 L stainless. The effect of sulfide ions on the corrosion resistance behavior of stainless steel is increasing the passivation current density Ip. The addition of 6 mg/L sulfide ions to the solution makes Ip of 316 L increase by 0.5 times.
文摘The novelty of this paper is the analysis in a medium containing sulfide ion due to the generation of this ion in petroleum industries, in the refining stage (the sulfide ion is also present on the produced water). The performance of 1-hydroxyethylidene-1,1-diphosphonic acid inhibitor (HEDP) was investigated by potentiodynamic polarization, electrochemical impedance spectroscopy, and weight loss measurements in a dissolution of AISI 304 stainless steel immersed in a solution containing chloride and sulfide ions. The protection of the stainless was increased with the addition of divalent cations (Ca<sup>2+</sup>, Zn<sup>2+</sup>, and Mg<sup>2+</sup>). Potentiodynamic polarization studies have shown that the inhibitor alone has anodic protection, but the addition of Ca<sup>2+</sup> (10 mg<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">·</span>L<sup>-1</sup>) favors the cathodic protection, and the addition of Zn<sup>2+</sup> (20 mg<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">·</span>L<sup>-1</sup>) and Mg<sup>2+</sup> (10 mg<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">·</span>L<sup>-1</sup>) mixed-type is observed. Electrochemical impedance spectroscopy was performed at three distinct potentials: -0.3 [V <i>vs.</i> SCE], <i>E</i><sub>corr</sub> [V <i>vs.</i> SCE], and 0.1 [V <i>vs.</i> SCE]. This revealed that calcium is responsible for favoring the formation of the film and the other elements (zinc and magnesium) favor the stabilization of the protective film. Scanning electron microscopy analysis revealed that the addition of cations provided the adsorption of HEDP on the metal surface. Weight loss results showed that the presence of zinc in a solution containing HEDP favored greater inhibitor efficiency (Zn<sup>2+</sup> <i>η</i><sub>m</sub> = 85.2% and for Mg<sup>2+</sup> <i>η</i><sub>m</sub> = 70.4%).
基金the National Natural Science Foundation of China(No.20563005)the High Performance Computer Center of Yunnan University.
文摘Two possible reaction mechanisms of VS^+(^3∑^-, 1^Г) with CO in the gas phase have been studied by using B3LYP/TZVP and CCSD(T)/6-311+G (3df, 3pd) methods: the O/S exchange reaction (VS^++CO→VO^++CS) and the S-transfer reaction (VS^+ + CO → V^+ + COS). The two reactions proceed via two-step and one-step mechanism, respectively. The barriers of the triplet and singlet PESs are 30.6 and 50.9 kcal/mol, respectively, for O/S exchange reaction and 7.3 and 50.2 kcal/mol, respectively, for the S-transfer reaction. The results indicate that the triplet ground state reaction is more favorable, and the S-transfer reaction is more favorable than the O/S exchange reaction, which is in good agreement with the experimental observation.
基金supported by the National Key Research and Development Program(Nos.2016YFA0202500,2016YFA0200102)the National Natural Science Foundation of China(No.21676160)China Postdoctoral Science Foundation(No.2017M620049)
文摘To meet the ever-increasing energy demands, advanced electrode materials are strongly requested for the exploration of advanced energy storage and conversion technologies, such as Li-ion batteries, Li-S batteries, Li-]Zn-air batteries, supercapacitors, dye-sensitized solar cells, and other electrocatalysis process (e.g., oxygen reductionlevolution reaction, hydrogen evolution reaction). Transition metal chalcogenides (TMCs, Le., sulfides and selenides) are forcefully considered as an emerging candidate, owing to their unique physical and chemical properties. Moreover, the integration of TMCs with conductive graphene host has enabled the significant improvement of electrochemical performance of devices. In this review, the recent research progress on TMC]graphene composites for applications in energy storage and conversion devices is summarized. The preparation process of TMC]graphene nanocomposites is also included. In order to promote an in-depth understanding of performance improvement for TMC/graphene materials, the operating principle of various devices and technologies are briefly presented. Finally, the perspectives are given on the design and construction of advanced electrode materials.