Simulation study of hydrogen sulfide removal in underground gas storage converted from the multilayered sour gas field

A simulation study was carried out to investigate the temporal evolution of H_(2)S in the Huangcaoxia underground gas storage (UGS), which is converted from a depleted sulfur-containing gas field. Based on the rock and fluid properties of the Huangcaoxia gas field, a multilayered model was built. The upper layer Jia-2 contains a high concentration of H_(2)S (27.2 g/m^(3)), and the lower layer Jia-1 contains a low concentration of H_(2)S (14.0 mg/m^(3)). There is also a low-permeability interlayer between Jia-1 and Jia-2. The multi-component fluid characterizations for Jia-1 and Jia-2 were implemented separately using the Peng-Robinson equation of state in order to perform the compositional simulation. The H_(2)S concentration gradually increased in a single cycle and peaked at the end of the production season. The peak H_(2)S concentration in each cycle showed a decreasing trend when the recovery factor (RF) of the gas field was lower than 70%. When the RF was above 70%, the peak H_(2)S concentration increased first and then decreased. A higher reservoir RF, a higher maximum working pressure, and a higher working gas ratio will lead to a higher H_(2)S removal efficiency. Similar to developing multi-layered petroleum fields, the operation of multilayered gas storage can also be divided into multi-layer commingled operation and independent operation for different layers. When the two layers are combined to build the storage, the sweet gas produced from Jia-1 can spontaneously mix with the sour gas produced from Jia-2 within the wellbore, which can significantly reduce the overall H_(2)S concentration in the wellstream. When the working gas volume is set constant, the allocation ratio between the two layers has little effect on the H_(2)S removal. After nine cycles, the produced gas’s H_(2)S concentration can be lowered to 20 mg/m^(3). Our study recommends combining the Jia-2 and Jia-1 layers to build the Huangcaoxia underground gas storage. This plan can quickly reduce the H_(2)S concentration of the produced gas to 20 mg/m^(3), thus meeting the gas export standards as well as the HSE (Health, Safety, and Environment) requirements in the field. This study helps the engineers understand the H_(2)S removal for sulfur-containing UGS as well as provides technical guidelines for converting other multilayered sour gas fields into underground storage sites.

Hydrogen sulfide responsive nanoplatforms: Novel gas responsive drug delivery carriers for biomedical applications

Hydrogen sulfide(H_(2)S)is a toxic,essential gas used in various biological and physical processes and has been the subject of many targeted studies on its role as a new gas transmitter.These studies have mainly focused on the production and pharmacological side effects caused by H_(2)S.Therefore,effective strategies to remove H_(2)S has become a key research topic.Furthermore,the development of novel nanoplatforms has provided new tools for the targeted removal of H_(2)S.This paper was performed to review the association between H_(2)S anddisease,relatedH_(2)S inhibitory drugs,aswell as H_(2)S responsive nanoplatforms(HRNs).This review first analyzed the role of H_(2)S in multiple tissues and conditions.Second,common drugs used to eliminate H_(2)S,as well as their potential for combination with anticancer agents,were summarized.Not only the existing studies on HRNs,but also the inhibition H_(2)S combined with different therapeutic methods were both sorted out in this review.Furthermore,this review provided in-depth analysis of the potential of HRNs about treatment or detection in detail.Finally,potential challenges of HRNs were proposed.This study demonstrates the excellent potential of HRNs for biomedical applications.

Personal Review:Sources of sulfide in waste streams and current biotechnologies for its removal

Sulfide-containing waste streams are generated by a number of industries. It is emitted into the environment as dis- solved sulfide (S2- and HS-) in wastewaters and as H2S in waste gases. Due to its corrosive nature, biological hydrogen sulfide removal processes are being investigated to overcome the chemical and disposal costs associated with existing chemically based removal processes. The nitrogen and sulfur metabolism interacts at various levels of the wastewater treatment process. Hence, the sulfur cycle offers possibilities to integrate nitrogen removal in the treatment process, which needs to be further optimized by appropriate design of the reactor configuration, optimization of performance parameters, retention of biomass and optimization of biomass growth. The present paper reviews the biotechnological advances to remove sulfides from various environments.

Microbial Characterization of Denitrifying Sulfide Removal Sludge Using High-Throughput Amplicon Sequencing Method

The denitrifying sulfide removal(DSR) process has recently been studied extensively from an engineering perspective. However, the importance of microbial communities of this process was generally underestimated. In this study, the microbial community structure of a lab-scale DSR reactor was characterized in order to provide a comprehensive insight into the key microbial groups in DSR system. Results from high-throughput sequencing analysis revealed that the fraction of autotrophic denitrifiers increased from 2.34 % to 10.93% and 44.51% in the DSR system when the influent Na Cl increased from 0 g/L, to 4 g/L and 30 g/L, respectively. On the contrary, the fraction of heterotrophic denitrifiers decreased from 61.74% to 39.57%, and 24.12%, respectively. Azoarcus and Thiobacillus were the main autotrophic denitrifiers, and Thauera was the main hetetrophic denitrifier during the whole process. This study could be useful for better understanding the interaction between autotrophs and heterotrophs in DSR system.

Enhanced Performance of Denitrifying Sulfide Removal Process by 1,2-Naphthoquinone-4-Sulphonate

The denitrifying sulfide removal(DSR) process with bio-granules comprising both heterotrophic and autotrophic denitrifiers can simultaneously convert nitrate, sulfide and acetate species into di-nitrogen gas, elemental sulfur and carbon dioxide, respectively, at high loading rates. This study has determined that the reaction rate of sulfide oxidized into sulfur could be enhanced in the presence of 1,2-naphthoquinone-4-sulphonate(NQS). The presence of NQS mitigated the inhibition effects of sulfide species on denitrification. Furthermore, the reaction rates of nitrate and acetate to nitrogen gas and CO_2, respectively, were also promoted in the presence of NQS, thereby enhancing the performance of DSR granules. The advantages and disadvantages of applying the NQS-DSR process are discussed.

Application and Regeneration of a Non-Aqueous System of Cu/HCl and DMF for the Oxidation of Hydrogen Sulfide in Natural Gas

A copper-based non-aqueous-phase desulfurization agent is prepared by adding CuCl_(2) to the solvent N,Ndimethylformamide(DMF).Static desulfurization experiments show that the agent has high efficiency.However,the desulfurization reaction leads to the formation of a copper sulfide precipitate.It is found that the addition of chloride ions in the form of hydrochloric acid or potassium chloride prevents the formation of copper sulfide,and elemental sulfur is precipitated instead.The efficient absorption of H2S by the Cu/HCl–DMF agent relies on the rapid coordination of Cu^(2+)with DMF,Cl^(−),and H2S molecules to form a[Cu(DMF)_(n−p)(HS−)_(p)(Cl−)_(m)]_((2−p−m))+complex.The desulfurization agent has a sulfur capacity of up to 9.81 g/L when used in static bubble desulfurization at atmospheric pressure.The system has low viscosity and good chemical and thermal stability.It can be rapidly regenerated through continuous oxidation.After five repetitions of the regeneration procedure,the sulfur capacity reaches more than 91%of the initial capacity,indicating the potential of the system for commercial applications.

镍精矿除铜的单纯形优化

本文简要叙述了单纯形优化的基本思想与寻优步骤。应用单纯形法对镍精矿—阳极泥—镍电解阳极液反应体系的深度除铜条件进行了寻优试验,其结果与前人的试验及工业实践基本相同,表明单纯形优化方法是确定多变量湿法冶金体系中某些重要因素的一种快速而简单的方法。

Study on the Methods for Removing Sulfide Ion and Sulfate Radical from the Oilfield Sewage

Sulfide ion can reduce the viscosity of polymer solution. The higher the concentration of sulfide ion is, the greater the effect of viscosity on polymer is, and it directly affects oil recovery rate. Some methods for removing sulfide were studied by adding the oxidizing substances. Each method had certain effect on removing sulfide. The addition of hydrogenperoxide in the solution makes it faster to remove sulfide than flowing air in it, although the removal of sulfide is still not complete. This removal is quick when ozone takes part in, and it will spend much time with the increased volume of solution. The extent of removing sulfide was mainly related to the oxidability of re- moved substances. The stronger the oxidability of oxidizing substances was, the better the performance for sulfide removing was. In addition, part of sulfate radical in oilfield sewage could be removed by nanofiltration membrane. Removal efficiency of sulfate radical is about 50%. The probability may be avoided that sulfate radical was reduced into sulfide by the sulfate-reducing bacteria （SRB） in sewage. This method could radically reduce the presence of the reduction of sulfur in sewage, and it can reduce the corrosion of underground oil pipeline.