Reducing ammonia(NH3) and nitrous oxide(N2O) emissions have great effects on mitigating nitrogen(N) nutrient loss and greenhouse gas emissions. Controlled release urea(CRU) can control the N release rate, which reduce...Reducing ammonia(NH3) and nitrous oxide(N2O) emissions have great effects on mitigating nitrogen(N) nutrient loss and greenhouse gas emissions. Controlled release urea(CRU) can control the N release rate, which reduces reactive N loss and increases nitrogen use efficiency relative to conventional urea(CU). However, the crucial factors influencing the responses of NH3and N2O emissions to CRU relative to CU are still unclear. In this study, we evaluated the responses of NH3and N2O emissions to CRU based on collected field data with a meta-analysis. CRU reduced the NH3and N2O emissions by 32.7 and 25.0% compared with CU, respectively. According to subgroup analysis, CRU presented better mitigation of NH3and N2O emissions in soils with pH 6.5–7.5(–47.9 and –23.7%) relative to either pH<6.5(–28.5and –21.4%) or pH>7.5(–29.3 and –17.3%), and in the rice season(–34.8 and –29.1%) relative to the wheat season(–19.8 and –22.8%). The responses of NH3and N2O emissions to CRU increased from rainfed(–30.5 and –17.0%) to irrigated(–32.5 and –22.9%), and then to paddy(–34.8 and –29.1%) systems. In addition, the response of N2O emission mitigation increased with increases in soil total nitrogen(TN);however, soil TN did not significantly affect the response of NH3volatilization. The reduction in NH3emission was greater in sandy-textured soil(–57.7%) relative to loam-textured(–32.9%) and clay-textured(–32.3%) soils, whereas soil texture did not affect N2O emission. Overall, CRU was a good option for reducing the NH3and N2O emissions relative to CU in agricultural production. This analysis improves our understanding of the crucial environmental and management factors influencing the mitigation of NH3and N2O emissions under CRU application, and these site-specific factors should be considered when applying CRU to reduce reactive N loss and increase NUE.展开更多
Polyurethane coated urea slow/controlled release fertilizer was prepared based on urea granules, isocyanate, polyols and paraffin. Isocyanate reacted with polyols to synthesize the polyurethane skin layer on urea gran...Polyurethane coated urea slow/controlled release fertilizer was prepared based on urea granules, isocyanate, polyols and paraffin. Isocyanate reacted with polyols to synthesize the polyurethane skin layer on urea granules surface. Paraffin serves as a lubricant during syntheses of polyurethane skin layers. The structure and nutrient release characteristics of the polyurethane skin layers were investigated by FTIR, SEM and TG. Urea nitrogen slow-release behavior of the polyurethane coated urea was tested. The experimental results indicated that compact and dense polyurethane skin layers with a thickness of 10-15 lam were formed on urea surface, the urea nitrogen slow-release time can reach 40-50 days. Paraffin proves to play a key role in inhibiting water to penetrate into urea, but excessive addition would decrease the polyurethane crosslinking density.展开更多
Field experiments were conducted to study the effects of the controlled release urea (CRU) application on growth yield and nitrogen recovery efficiency of cotton in the main cotton zone of the Yangtze River basin in 2...Field experiments were conducted to study the effects of the controlled release urea (CRU) application on growth yield and nitrogen recovery efficiency of cotton in the main cotton zone of the Yangtze River basin in 2010. Different nitrogen levels were set in order to determine the suitable dosage of CRU on cotton. The special purpose was to provide evidence for the CRU application in cotton fields. The results show that the application of CRU promotes the growth of cotton significantly and enhances the nitrogen supply in the whole period. Compared to the treatment with total N as base fertilizer (UB), the bod, flower, little bolls and total bolls are increased significantly. There are no significant differences in the yield between the CRU treatment and the treatment of controlled release urea and urea combined application (60%CRU + 40%U), but an increase by 12.38%-22.67% compared to the UB treatment, and an increase by 4.49%-7.23% compared to the treatments of total N split application (UD). The nitrogen uptake of CRU treatment was significantly increased by 13.01%-48.32% and 30.27%-13.01% than UB treatment and UD treatment, respectively. The nutrient recovery efficiency of CRU treatment is increased by 16.42-20.59, 5.92-11.29 and 4.22-12.59 percentage points compared to the UB treatment, UD treatment and 60%CRU + 40%U treatment, respectively. In this study, there was a good linearity relationship between the cotton yield and amount of CRU in Wuxue site. The yield of cotton response to amount of CRU could be described by the model of linear plus plateau in Jingzhou site.展开更多
Controlled-release urea was fabricated by coating urea particles with a polymer latex in a fluidized bed. The latex film coated on the urea particle surface was hydrophilic and swelled in water. The film swelling in w...Controlled-release urea was fabricated by coating urea particles with a polymer latex in a fluidized bed. The latex film coated on the urea particle surface was hydrophilic and swelled in water. The film swelling in water and urea solution and properties of the swollen film were studied. The film swelling in urea solution followed the Lagergren＇s pseudo-first order kinetics with the swelling coefficient depending on the film material and experimental conditions. The effects of swelling on film structure and permeability were studied. The film permeability coefficient decreased with increasing swelling ratio with an approx- imately linear relationship. Based on the film formation process and structure of the swollen film. a film structure model consisting of dense and swollen phases was proposed. The permeability coefficient of the spherical film and cumulative release of urea from the coated particles were calculated from the swelling ratio of the spherical film. which was determined from the expansion curve of the coated particle during the release process, The calculated and measured release curves agreed well, This research indicates that the swelling of the hydrophilic film and the controlled-release mechanism are important factors in the development of controlled-release urea.展开更多
基金financially supported by the Smart Fertilization Project (05)the National Key Research & Development Program of China (2022YFD1700605)。
文摘Reducing ammonia(NH3) and nitrous oxide(N2O) emissions have great effects on mitigating nitrogen(N) nutrient loss and greenhouse gas emissions. Controlled release urea(CRU) can control the N release rate, which reduces reactive N loss and increases nitrogen use efficiency relative to conventional urea(CU). However, the crucial factors influencing the responses of NH3and N2O emissions to CRU relative to CU are still unclear. In this study, we evaluated the responses of NH3and N2O emissions to CRU based on collected field data with a meta-analysis. CRU reduced the NH3and N2O emissions by 32.7 and 25.0% compared with CU, respectively. According to subgroup analysis, CRU presented better mitigation of NH3and N2O emissions in soils with pH 6.5–7.5(–47.9 and –23.7%) relative to either pH<6.5(–28.5and –21.4%) or pH>7.5(–29.3 and –17.3%), and in the rice season(–34.8 and –29.1%) relative to the wheat season(–19.8 and –22.8%). The responses of NH3and N2O emissions to CRU increased from rainfed(–30.5 and –17.0%) to irrigated(–32.5 and –22.9%), and then to paddy(–34.8 and –29.1%) systems. In addition, the response of N2O emission mitigation increased with increases in soil total nitrogen(TN);however, soil TN did not significantly affect the response of NH3volatilization. The reduction in NH3emission was greater in sandy-textured soil(–57.7%) relative to loam-textured(–32.9%) and clay-textured(–32.3%) soils, whereas soil texture did not affect N2O emission. Overall, CRU was a good option for reducing the NH3and N2O emissions relative to CU in agricultural production. This analysis improves our understanding of the crucial environmental and management factors influencing the mitigation of NH3and N2O emissions under CRU application, and these site-specific factors should be considered when applying CRU to reduce reactive N loss and increase NUE.
基金the National Key Technology R&D Program of the 11th Five-Year Period (No.2006BAD10B08)
文摘Polyurethane coated urea slow/controlled release fertilizer was prepared based on urea granules, isocyanate, polyols and paraffin. Isocyanate reacted with polyols to synthesize the polyurethane skin layer on urea granules surface. Paraffin serves as a lubricant during syntheses of polyurethane skin layers. The structure and nutrient release characteristics of the polyurethane skin layers were investigated by FTIR, SEM and TG. Urea nitrogen slow-release behavior of the polyurethane coated urea was tested. The experimental results indicated that compact and dense polyurethane skin layers with a thickness of 10-15 lam were formed on urea surface, the urea nitrogen slow-release time can reach 40-50 days. Paraffin proves to play a key role in inhibiting water to penetrate into urea, but excessive addition would decrease the polyurethane crosslinking density.
文摘Field experiments were conducted to study the effects of the controlled release urea (CRU) application on growth yield and nitrogen recovery efficiency of cotton in the main cotton zone of the Yangtze River basin in 2010. Different nitrogen levels were set in order to determine the suitable dosage of CRU on cotton. The special purpose was to provide evidence for the CRU application in cotton fields. The results show that the application of CRU promotes the growth of cotton significantly and enhances the nitrogen supply in the whole period. Compared to the treatment with total N as base fertilizer (UB), the bod, flower, little bolls and total bolls are increased significantly. There are no significant differences in the yield between the CRU treatment and the treatment of controlled release urea and urea combined application (60%CRU + 40%U), but an increase by 12.38%-22.67% compared to the UB treatment, and an increase by 4.49%-7.23% compared to the treatments of total N split application (UD). The nitrogen uptake of CRU treatment was significantly increased by 13.01%-48.32% and 30.27%-13.01% than UB treatment and UD treatment, respectively. The nutrient recovery efficiency of CRU treatment is increased by 16.42-20.59, 5.92-11.29 and 4.22-12.59 percentage points compared to the UB treatment, UD treatment and 60%CRU + 40%U treatment, respectively. In this study, there was a good linearity relationship between the cotton yield and amount of CRU in Wuxue site. The yield of cotton response to amount of CRU could be described by the model of linear plus plateau in Jingzhou site.
基金The authors express their gratitude for the financial support of this study by the National Natural Science Foundation of China （NSFC No. 20876085）.
文摘Controlled-release urea was fabricated by coating urea particles with a polymer latex in a fluidized bed. The latex film coated on the urea particle surface was hydrophilic and swelled in water. The film swelling in water and urea solution and properties of the swollen film were studied. The film swelling in urea solution followed the Lagergren＇s pseudo-first order kinetics with the swelling coefficient depending on the film material and experimental conditions. The effects of swelling on film structure and permeability were studied. The film permeability coefficient decreased with increasing swelling ratio with an approx- imately linear relationship. Based on the film formation process and structure of the swollen film. a film structure model consisting of dense and swollen phases was proposed. The permeability coefficient of the spherical film and cumulative release of urea from the coated particles were calculated from the swelling ratio of the spherical film. which was determined from the expansion curve of the coated particle during the release process, The calculated and measured release curves agreed well, This research indicates that the swelling of the hydrophilic film and the controlled-release mechanism are important factors in the development of controlled-release urea.
