Introduction The use of supercritical fluids such as supercritical CO<sub>2</sub>（scCO<sub>2</sub>） has provided a ’clean’ and effective alternative to traditional methods of protein delive...Introduction The use of supercritical fluids such as supercritical CO<sub>2</sub>（scCO<sub>2</sub>） has provided a ’clean’ and effective alternative to traditional methods of protein delivery systems.Here。展开更多
A series of TiO 2-MoO 3 nano-composite photocatalysts were prepared by supercritical fluid dry method(SCFD) and an impregnation technique with TiCl 4 and (NH 4) 6Mo 7O 24 ·4H 2O as the starting materia...A series of TiO 2-MoO 3 nano-composite photocatalysts were prepared by supercritical fluid dry method(SCFD) and an impregnation technique with TiCl 4 and (NH 4) 6Mo 7O 24 ·4H 2O as the starting materials. The catalysts were characterized by the means of XRD, TEM and UV-Vis. Methyl orange was used as model compound for the evaluation of their catalytic activities. The results indicated that the photo-catalyst prepared by SCFD had the advantages of small size(12.84 nm), narrow distribution and good dispersivity. The presence of small amount of Mo in composite catalyst gives rise to the red shift of its absorbance wavelength, decrease of its energy gap and increase of the utility of visible light. Furthermore, higher surface acidity of the photo-catalyst was obtained as the result of the addition of MoO 3. Compared with pure TiO 2, the catalytic activity of the TiO 2-MoO 3 nano-composite photo-catalyst was improved significantly. As the doping concentration of the composite catalysts was controlled at 0.6%(molar percentage), 100% degradation of methyl orange was achieved with in 1.2 h irradiation time.展开更多
A series of TiO2-SnO2 nano-sized composite photo-catalysts containing Sn (9.3%-30.1%) were prepared from TiCI4 and SnCl4·5H2O by using sol-gel, supercritical fluid dry and solid-phase reaction (SCFD) combination ...A series of TiO2-SnO2 nano-sized composite photo-catalysts containing Sn (9.3%-30.1%) were prepared from TiCI4 and SnCl4·5H2O by using sol-gel, supercritical fluid dry and solid-phase reaction (SCFD) combination technology. Characterizations with X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier Transform Infrared Spectroscopy (FTIR) showed that, in addition to anatase type TiO2, a new active phase (Ti, Sn)O2 (with particle size of 2.0-4.3 nm) formed, and there were no SnO2 crystals observed in the range of the doping concentration studied. Photo-catalytic reaction of phenol was used as a model reaction to evaluate the catalytic activities of the obtained catalysts. Compared with pure TiO2 or Ti-Sn catalyst prepared with general sol-gel method, Ti-Sn nano-composite photo-catalyst thus obtained showed significant improvement in catalytic activity. The photo-catalytic degradation rate of phenol could reach as high as 93.5% after 7 h. The preparation conditions of the new phase (Ti, Sn)O2 were investigated and its catalytic mechanism was proposed. The photo-catalytic particles prepared using SCFD combination technology exhibited small particle size, large surface area and high activity.展开更多
The feasibility of removal of the organochlorine pesticides residues of hexachlorocyclohexane(BHC) from radix ginseng with supercritical CO2 was explored. Some factors, such as extraction pressure, extraction temperat...The feasibility of removal of the organochlorine pesticides residues of hexachlorocyclohexane(BHC) from radix ginseng with supercritical CO2 was explored. Some factors, such as extraction pressure, extraction temperature, and kinds of co-solvents were investigated. The experimental results indicate that it is possible to reduce BHC residues in radix ginseng to the level of 0.1 × 10^-6 with supercritical CO2 in the presence of suitable amount of co-solvent, such as water.展开更多
This paper is to study a new method to remove sericin from raw silk fiber. This new process is done using an organic acid as a pretreatment and then using CO2 supercritical fluid to remove sericin from silk fiber. Thi...This paper is to study a new method to remove sericin from raw silk fiber. This new process is done using an organic acid as a pretreatment and then using CO2 supercritical fluid to remove sericin from silk fiber. This method would be a huge break from the traditional environmentally unsustainable methods used today. This new processing method keeps the removed sericin in a clean state that can be used as a highly marketable silk protein in the medical and cosmetic industries.展开更多
A number of studies have been reported on the applications of supercritical fluids to polymeric processes. The presence of volatiles can affect the end-use properties of polymer materials. Therefore, these volatiles m...A number of studies have been reported on the applications of supercritical fluids to polymeric processes. The presence of volatiles can affect the end-use properties of polymer materials. Therefore, these volatiles must be reduced to a level below the maximum permissible limit. Conventional heat-relevant techniques for polymer devolatilization sometimes have limited effectiveness. Devolatilization with supercritical fluids, however, can enhance removal of volatiles from polymers. A model for diffusion-limited extraction is used to characterize dynamic supercritical fluid devolatilization of spherical polymer particles. The rate of supercritical fluid devolailization for styrene/polystyrene system is measured at 343 K and 18 MPa and at CO2 flow rate of 1.93, 3.27 and 5.62 L·min^-1, respectively. The model analysis, which is consistent with experimental results, indicates that the supercritical fluid devolatilization is not solubility-limited but diffusion-limited when CO2 flow rate is above 4.00 L·min^-1.展开更多
This article reports recent developments and advances in the simulation of the CO2-formation fluid displacement behaviour at the pore scale of subsurface porous media. Roughly, there are three effective visualization ...This article reports recent developments and advances in the simulation of the CO2-formation fluid displacement behaviour at the pore scale of subsurface porous media. Roughly, there are three effective visualization approaches to detect and observe the CO2-formation fluid displacement mechanism at the micro-scale, namely, magnetic resonance imaging, X-ray computed tomography and fabricated micromodels, but they are not capable of investigating the dis- placement process at the nano-scale. Though a lab-on-chip approach for the direct visualization of the fluid flow behaviour in nanoscale channels has been developed using an advanced epi-fluorescence microscopy method combined with a nanofluidic chip, it is still a qualitative analysis method. The lattice Boltzmann method （LBM） can simulate the CO2 displacement processes in a two-dimensional or three-dimensional （3D） pore structure, but until now, the CO2 displace- ment mechanisms had not been thoroughly investigated and the 3D pore structure of real rock had not been directly taken into account in the simulation of the CO2 displacement process. The status of research on the applications of CO2 displacement to enhance shale gas recovery is also analyzed in this paper. The coupling of molecular dynamics and LBM in tandem is proposed to simulate the CO2-shale gas displacement process based on the 3D digital model of shale obtained from focused ion beams and scanning electron microscopy.展开更多
The use of supercritical fluid carbon dioxide (SFCO2) in extraction of lanolin and its alcohol is superior to the conventional solvent extraction method. Its distinctive advantages include high extractive ratio, nonto...The use of supercritical fluid carbon dioxide (SFCO2) in extraction of lanolin and its alcohol is superior to the conventional solvent extraction method. Its distinctive advantages include high extractive ratio, nontoxic and nonflammable solvents, and minimal by -product pollution. The resulting refined lanolin and its alcohol have light color and little odor, and can be used as raw materials for high grade cosmetic products.展开更多
Deliming using CO 2 Supercritical Fluid(CO 2 SCF) as a reactant was investigated,and the effect of the pressure,temperature and time on the deliming and degrease was studied.The results showed that CO 2 SCF can be use...Deliming using CO 2 Supercritical Fluid(CO 2 SCF) as a reactant was investigated,and the effect of the pressure,temperature and time on the deliming and degrease was studied.The results showed that CO 2 SCF can be used as a deliming agent.Deliming using CO 2 SCF as reactant had some advantages such as rapidity and completness compared to completely than conventional methods,and can pavoidnt the formation of calcium spot.Furthermore,this new deliming method had some degreasing ability.展开更多
文摘Introduction The use of supercritical fluids such as supercritical CO<sub>2</sub>（scCO<sub>2</sub>） has provided a ’clean’ and effective alternative to traditional methods of protein delivery systems.Here。
文摘A series of TiO 2-MoO 3 nano-composite photocatalysts were prepared by supercritical fluid dry method(SCFD) and an impregnation technique with TiCl 4 and (NH 4) 6Mo 7O 24 ·4H 2O as the starting materials. The catalysts were characterized by the means of XRD, TEM and UV-Vis. Methyl orange was used as model compound for the evaluation of their catalytic activities. The results indicated that the photo-catalyst prepared by SCFD had the advantages of small size(12.84 nm), narrow distribution and good dispersivity. The presence of small amount of Mo in composite catalyst gives rise to the red shift of its absorbance wavelength, decrease of its energy gap and increase of the utility of visible light. Furthermore, higher surface acidity of the photo-catalyst was obtained as the result of the addition of MoO 3. Compared with pure TiO 2, the catalytic activity of the TiO 2-MoO 3 nano-composite photo-catalyst was improved significantly. As the doping concentration of the composite catalysts was controlled at 0.6%(molar percentage), 100% degradation of methyl orange was achieved with in 1.2 h irradiation time.
基金The authors thank the National Natural Scir nce Foun-dation of China(No.20076004)the National Development Project of High Technology(No.2001AA322030)the Doctoral Program of Higher Education(No.2000001005)for the financial support of this project.
文摘A series of TiO2-SnO2 nano-sized composite photo-catalysts containing Sn (9.3%-30.1%) were prepared from TiCI4 and SnCl4·5H2O by using sol-gel, supercritical fluid dry and solid-phase reaction (SCFD) combination technology. Characterizations with X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier Transform Infrared Spectroscopy (FTIR) showed that, in addition to anatase type TiO2, a new active phase (Ti, Sn)O2 (with particle size of 2.0-4.3 nm) formed, and there were no SnO2 crystals observed in the range of the doping concentration studied. Photo-catalytic reaction of phenol was used as a model reaction to evaluate the catalytic activities of the obtained catalysts. Compared with pure TiO2 or Ti-Sn catalyst prepared with general sol-gel method, Ti-Sn nano-composite photo-catalyst thus obtained showed significant improvement in catalytic activity. The photo-catalytic degradation rate of phenol could reach as high as 93.5% after 7 h. The preparation conditions of the new phase (Ti, Sn)O2 were investigated and its catalytic mechanism was proposed. The photo-catalytic particles prepared using SCFD combination technology exhibited small particle size, large surface area and high activity.
文摘The feasibility of removal of the organochlorine pesticides residues of hexachlorocyclohexane(BHC) from radix ginseng with supercritical CO2 was explored. Some factors, such as extraction pressure, extraction temperature, and kinds of co-solvents were investigated. The experimental results indicate that it is possible to reduce BHC residues in radix ginseng to the level of 0.1 × 10^-6 with supercritical CO2 in the presence of suitable amount of co-solvent, such as water.
文摘This paper is to study a new method to remove sericin from raw silk fiber. This new process is done using an organic acid as a pretreatment and then using CO2 supercritical fluid to remove sericin from silk fiber. This method would be a huge break from the traditional environmentally unsustainable methods used today. This new processing method keeps the removed sericin in a clean state that can be used as a highly marketable silk protein in the medical and cosmetic industries.
基金Supported by the National Natural Science Foundation of China (No. 20576123).
文摘A number of studies have been reported on the applications of supercritical fluids to polymeric processes. The presence of volatiles can affect the end-use properties of polymer materials. Therefore, these volatiles must be reduced to a level below the maximum permissible limit. Conventional heat-relevant techniques for polymer devolatilization sometimes have limited effectiveness. Devolatilization with supercritical fluids, however, can enhance removal of volatiles from polymers. A model for diffusion-limited extraction is used to characterize dynamic supercritical fluid devolatilization of spherical polymer particles. The rate of supercritical fluid devolailization for styrene/polystyrene system is measured at 343 K and 18 MPa and at CO2 flow rate of 1.93, 3.27 and 5.62 L·min^-1, respectively. The model analysis, which is consistent with experimental results, indicates that the supercritical fluid devolatilization is not solubility-limited but diffusion-limited when CO2 flow rate is above 4.00 L·min^-1.
基金The authors gratefully acknowledge the financial support of the National Natural Science Foundation of China （Grant Nos. 51374213 and 51674251）, the State Key Research Development Program of China （Grant No. 2016YFC0600705）, the National Natural Science Fund for Distinguished Young Scholars of China （Grant No. 51125017）, the Fund for Innovative Research and Development Group Program of Jiangsu Province （Grant No. 2014- 27）, the Science Fund for Creative Research Groups of the National Natural Science Foundation of China （Grant No. 51421003）, and the Priority Academic Program Development of the Jiangsu Higher Education Institutions （PAPD 2014）.
文摘This article reports recent developments and advances in the simulation of the CO2-formation fluid displacement behaviour at the pore scale of subsurface porous media. Roughly, there are three effective visualization approaches to detect and observe the CO2-formation fluid displacement mechanism at the micro-scale, namely, magnetic resonance imaging, X-ray computed tomography and fabricated micromodels, but they are not capable of investigating the dis- placement process at the nano-scale. Though a lab-on-chip approach for the direct visualization of the fluid flow behaviour in nanoscale channels has been developed using an advanced epi-fluorescence microscopy method combined with a nanofluidic chip, it is still a qualitative analysis method. The lattice Boltzmann method （LBM） can simulate the CO2 displacement processes in a two-dimensional or three-dimensional （3D） pore structure, but until now, the CO2 displace- ment mechanisms had not been thoroughly investigated and the 3D pore structure of real rock had not been directly taken into account in the simulation of the CO2 displacement process. The status of research on the applications of CO2 displacement to enhance shale gas recovery is also analyzed in this paper. The coupling of molecular dynamics and LBM in tandem is proposed to simulate the CO2-shale gas displacement process based on the 3D digital model of shale obtained from focused ion beams and scanning electron microscopy.
基金Science Foundation of National Education Commission(99053)
文摘The use of supercritical fluid carbon dioxide (SFCO2) in extraction of lanolin and its alcohol is superior to the conventional solvent extraction method. Its distinctive advantages include high extractive ratio, nontoxic and nonflammable solvents, and minimal by -product pollution. The resulting refined lanolin and its alcohol have light color and little odor, and can be used as raw materials for high grade cosmetic products.
文摘Deliming using CO 2 Supercritical Fluid(CO 2 SCF) as a reactant was investigated,and the effect of the pressure,temperature and time on the deliming and degrease was studied.The results showed that CO 2 SCF can be used as a deliming agent.Deliming using CO 2 SCF as reactant had some advantages such as rapidity and completness compared to completely than conventional methods,and can pavoidnt the formation of calcium spot.Furthermore,this new deliming method had some degreasing ability.
