ZIF-8-based micro-arc oxidation composite coatings enhanced the corrosion resistance and superhydrophobicity of a Mg alloy

Mg alloys are considered the most promising engineering materials because of their unique properties.However,the uncontrolled corrosion rate of these alloys limits their applications.Therefore,in this study,a micro-arc oxidation layer was used as a transition layer to“directly”grow a zinc-based metal-organic framework(MOF)composite coating on the surface of a Mg alloy(AZ91D).Herein,the two zeolitic imidazolate framework(ZIF-8)coatings with different morphologies were separately prepared by homologous metal oxide induction and a one-step in-situ growth method.The superhydrophobic composite coating showed strong hydrophobicity and self-cleaning properties,which could prevent the penetration of water and corrosive ions(Cl^(−))into the surface of AZ91D.Electrochemical tests demonstrated that the super-hydrophobic composite coatings greatly enhanced the corrosion resistance of AZ91D,and the corrosion current density decreased from 10^(−5)to 10^(−9)A/cm^(2).These results indicate that the ZIF-8 coatings are beneficial for improving the hydrophobicity and enhancing the corrosion resistance of Mg alloys.Therefore,MOF composite coatings provide a new strategy that can be used to prepare multifunctional anticorrosion coatings on metal substrates.

Superhydrophobicity of Bionic Alumina Surfaces Fabricated by Hard Anodizing

Bionic alumina samples were fabricated on convex dome type aluminum alloy substrate using hard anodizing technique. The convex domes on the bionic sample were fabricated by compression molding under a compressive stress of 92.5 MPa. The water contact angles of the as-anodized bionic samples were measured using a contact angle meter （JC2000A） with the 3μL water drop at room temperature. The measurement of the wetting property showed that the water contact angle of the unmodi- fied as-anodized bionic alumina samples increases from 90° to 137° with the anodizing time. The increase in water contract angle with anodizing time arises from the gradual formation of hierarchical structure or composite structure. The structure is composed of the micro-scaled alumina columns and pores. The height of columns and the depth of pores depend on the ano- dizing time. The water contact angle increases significantly from 96° to 152° when the samples were modified with self-assembled monolayer of octadecanethiol （ODT）, showing a change in the wettability from hydrophobicity to su- per-hydrophobicity. This improvement in the wetting property chemical modification. is attributed to the decrease in the surface energy caused by the

Corrosion resistance and superhydrophobicity of one-step polypropylene coating on anodized AZ31 Mg alloy

Superhydrophobic coatings have been considerably used in corrosion and its protection of metallic Mg.And the comprehensive performance(hydrophobicity,bonding strength,and corrosion resistance,etc.)of the top coating may be highly dependent on the physical and chemical properties of the primer or under coat.Herein,an integrated superhydrophobic polypropylene(PP)coating was fabricated on the micro-arc oxidized Mg substrate via one-step dipping.Surface morphologies and chemical compositions of the composite coating were examined through Fourier transform infrared spectroscopy(FT-IR),X-ray diffraction(XRD),and field-emission scanning electron microscopy(FESEM)together with X-ray photoelectron spectroscopy(XPS).The surface wettability of the coating was determined by contact angle and sliding angle.The corrosion-resistant performance was evaluated via electrochemical and immersion measurements.The results showed that the hybrid coating possessed micron-scaled granular structure on the surface with a high water contact angle of 167.2±0.8°and a low water sliding angle of 2.7±0.5°.The corrosion resistance of superhydrophobic coating was obviously enhanced with a low corrosion current density of 8.76×10^(−9)A/cm^(2),and the coating still maintained integrity after 248 h of immersion in 3.5wt%NaCl aqueous solution.The MAO coating provides better adhesion of PP to the surface.Hence,the superhydrophobic coating exhibited superior bonding strength,corrosion resistance and durability.

Morphologies and Superhydrophobicity of Hybrid Film Surfaces Based on Silica and Fluoropolymer

Fluoropolymer and different kinds of silica particles were used for controlling surface chemistry and morphology, respectively. A superhydrophobic surface originated from strawberry-like or quincunx-shaped composite silica particles was obtained. The dual size particles are obtained by utilizing the graft of different modified silica particles with epoxy functional group and amine functional group, This makes the surface of film form a composite interface to have irregular binary structure which plays an essential role in trapping air between the substrate surface and the liquid droplets to be necessary for high contact angle and low contact angle hysteresis. The maximum contact angle for water on the hybrid film is about 174±2° and the contact angle hysteresis is less than 2°. The surface morphologies, roughness and the wettability on the surface of films containing different structural silica particles were compared. It was shown that the hierarchical irregularly structure with a low roughness factor and high air-trapped ratio is indispensable for superhydrophobic surface. Although this structural surfaces based on composite silica particles play a vital role in governing the surface wettability, it is necessary to combine with a low surface energy to make the surface superhydrophobic.

Preparation and photocatalytic property of Fe_(2)O_(3)/ZnO composites with superhydrophobicity

A facile approach was developed to construct Fe_(2)O_(3)-modified ZnO micro/nanostructures with excellent superhydrophobicity and photocatalytic activities.The effects of stearic acid(SA)and Fe_(2)O_(3) on the morphological characteristics,water contact angle(WCA),and photocatalytic degradation were investigated.Superhydrophobicity results showed that WCA increased from 144°±2°to 154°±2°when the weight of SA increased from 5 to 20 mg because of the formation of a hierarchical or rough structure.Furthermore,Fe_(2)O_(3)-modified ZnO micro/nanostructure surfaces before and after SA treatment(20 mg)were chosen to evaluate the photodegradation of methylene blue(MB)dye under the support of visible light.MB degraded after 80 min of irradiation,and its photodegradation efficiencies were 91.5%at the superhydrophobic state and 92%at the hydrophilic state.This improvement in photocatalytic activity at both states might be attributed to an increase in surface area and improvement in charge carrier separation.

ELECTROSPRAYING/ELECTROSPINNING OF POLY(γ-STEARYL-LGLUTAMATE):FORMATION OF SURFACES WITH SUPERHYDROPHOBICITY

Electrospraying/electrospinning of poly(γ-stearyl-L-glutamate) (PSLG) was investigated on a series solutions with different concentrations in chloroform.Field emission scanning electron microscopy (FESEM) and attenuated Iotal reflectance Fourier transform infrared spectroscopy (FT-IR/ATR) were used to characterize the morphology and structure of the electrosprayed/electrospun polypeptide mats.It was found that electrospraying of PSLG with concentrations lower than 16 wt% afforded beads,while microfibers cou...

Induction of Superhydrophobicity in a Cellulose Substrate by LbL Assembly of Covalently Linked Dual-Sized Silica Nanoparticles Layers

Micro/nano texturized oxidized cellulose membranes (MNOCM) were constructed by layer-by-layer (LbL) assembly in which a base cellulose film was modified by covalent linkages to amino-functionalized silica nanoparticles (amino-SiO2 NPs, 260 nm diameter) and epoxy-functionalized silica nanoparticles (epoxy-SiO2 NPs, 30 nm diameter). The amino-SiO2 NPs grafted onto the MNOCM surface through a standard amidation reaction between the amino groups of the SiO2 NPs and the carboxyl groups of the MNOCM surface in the presence of EDC and NHS consequently forming a first layer of large (260 nm) nanoparticles;subsequently, it was reacted with smaller (30 nm) epoxy-SiO2 NPs. Continuous repetitions of these alternating sized silica NPs through a standard LbL approach lead to a highly micro/nano-texturized MNOCM film as shown by SEM, which was ultimately sealed with a layer of hydrophobic PFOTES (1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane). Although the wettability of MNOCM was no longer hydrophilic, it was found that at five layers deep of NPs, it became superhydrophobic as evidenced by a water contact angle of 151° ± 2° and slide angle of 4°. The change in wettability was attributed to increases in final LbL layer surface roughness induced by the sufficient LbL layering of alternating sizes of NPs akin to what is observed in a lotus leaf surface. It was also noted that these superhydrophobic-MNOCM materials displayed good self-cleaning.

Ultrafast laser-chemical modification hybrid fabrication of hydrostatic bearings with a superhydrophobicity solid-liquid interface

Oil film vortex severely reduces the stability of hydrostatic bearings. A solid-liquid interface with drag and slip properties can weaken the oil film vortex of the bearing. Here, a combined picosecond laser ablation and chemical modification method is proposed to prepare surfaces with microbulge array structure on 6061 aluminum alloy substrates. Because of the low surface energy of the perfluorododecyltriethoxysilane modification and the bulge geometry of the microbulge array structure, the surface shows excellent superhydrophobicity. The optimum contact angle in air for water is 164°, and that for oil is 139°. Two surfaces with “lotus-leaf effect” and “rose-petal effect” were obtained by controlling the processing parameters. The drag reduction properties of superhydrophobic surfaces were systematically investigated with slip lengths of 22.26 and 36.25 μm for deionized water and VG5 lubricant, respectively. In addition, the superhydrophobic surface exhibits excellent mechanical durability and thermal stability. The proposed method provides a new idea for vortex suppression in hydrostatic bearings and improves the stability of bearings in high-speed operation.

Rapid surface texturing to achieve robust superhydrophobicity,controllable droplet impact,and anti-frosting performances

Robust superhydrophobic surfaces with excellent capacities of repelling water and anti-frosting are of importance for many mechanical components.In this work,wear-resistant superhydrophobic surfaces were fabricated by curing a mixture of polyurethane acrylate(PUA)coating and 1H,1H,2H,2H-Perfluorodecyltrichlorosilane(HFTCS)on titanium alloy(TC4)surfaces decorated with micropillars pattern,thus,composite functional surfaces with PUA coating in the valleys around the micropillars pattern of TC4 were achieved.Apparent contact angle on fabricated surfaces could reach 167°.Influences of the geometric parameters of micropillars pattern on the apparent contact angle were investigated,and the corresponding wear-resistant property was compared.Droplet impact and anti-frosting performances on the prepared surfaces were highlighted.An optimized design of surface texture with robust superhydrophobicity,controllable droplet impact,and anti-frosting performances was proposed.This design principle is of promising prospects for fabricating superhydrophobic surfaces in traditional mechanical systems.

Superhydrophobicity-improved Ethanol-Water Separation

Efficient separation of biofuels from fermentation broths vis pervaporation plays an important role in addressing the global challenges,such as developing renewable energy.Great efforts have been continuously devoted in the past decades to developing high-performance pervaporation membranes.A recent report published in Science by Zhao et al.showed that a superhydrophobic surface could contribute significantly to improving the pervaporation separation of ethanol-water mixture,which will generate broad interest for the new design of separation membranes.

Large-scale fabrication of decoupling coatings with promising robustness and superhydrophobicity for antifouling,drag reduction,and organic photodegradation

It is still a challenge to achieve large-area preparation of robust superhydrophobic surfaces with strong mechanical stability.Here,a simple and low-cost method to prepare robust decoupling superhydrophobic coatings on aluminum(Al)alloys substrate has been presented.The superhydrophobicity and robustness of decoupling coatings are realized by structuring surfaces at two different length scales,with nanostructures for superhydrophobicity and microstructures for robustness.This prepared decoupling coating shows promising superhydrophobicity,with water contact angle(CA)of~158.4°and roll off angle(RA)of~3°.It also exhibits high repellency for impacting water droplets.Notably,the decoupling coating processes outstanding adhesion strength on the substrate after tape-peeling and cross-cut tests,also with promising wear resistantance after sandpaper abrasion and wear test.The friction coefficient of this decoupling coating is only~0.2.In addition,the robust decoupling superhydrophobic coating is applied to underwater buoyancy enhancement and fluid resistance reduction(drag reduction rate~30.09%).This decoupling superhydrophobic coating also displays promising self-cleaning and antifouling properties.Moreover,benefitting from the photocatalytic property of TiO2,this decoupling coating is also exploited for degrading organics to achieve seawater purification.This obtained decoupling superhydrophobic coating is expected to apply on other solids in marine fields,and the simple and eco-friendly method develops the potential practical application.

Characterization of Flame Retardancy and Oil-Water Separation Capacity of Superhydrophobic Silylated Melamine Sponges

A silylated melamine sponge(SMS)was prepared by two simple steps,namely,immersion and dehydration of a melamine sponge coated with methyltrichlorosilane.The silylated structure of SMS was characterized by FT-IR(Fourier-transform infrared)spectroscopy,SEM(Scanning electron microscopy)and in terms of water contact angles.Its oil-water absorption and separation capacities were measured by FT-IR and UV-visible spectrophoto-metry.The experimental results have shown that oligomeric silanol covalently bonds by Si-N onto the surface of melamine sponge skeletons.SMS has shown superhydrophobicity with a water contact angle exceeding 150°±1°,a better separation efficiency with regard to diesel oil(by 99.31%(wt/wt%)in oil-water mixture and even up to 99.99%(wt/wt%)for diesel oil in its saturated aqueous solution.Moreover,SMS inherited the intrinsicflame retardancy of the melamine sponge.In general,SMS has shown superhydrophobicity,high porosity,excellent selectivity,remarkable recyclability,and better absorption capacity for various oils and organic solvents,and a high separation efficiency for oil in saturated aqueous solutions.

Characterization of Multi-scale Morphology and Superhydrophobicity of Water Bamboo Leaves and Biomimetic Polydi- methylsiloxane （PDMS） Replicas

The morphology and wettability of Water Bamboo Leaves （WBL） and their biomimetic replicas were investigated. The particular morphology structures of samples were characterized by Scanning Electron Microscopy （SEM） and Confocal Laser Scanning Microscopy （CLSM）. The static wettability of samples was assessed by contact angle measurements, while the dy- namic wettability was analyzed by high speed camera system. The wettability mechanism of WBL was also explained by Cassie model. Artificial surfaces were fabricated by duplicating WBL surface microstructures using PDMS in large area （5 cm x 3 cm）. The results show the main structure characteristics of this leaf surface are sub-millimeter groove arrays, micron-scale papillae and a superimposed layer with 3D epicuticular wax sculptures hierarchical structure, and the static Water Contact Angle （WCA） of 15l~~2~ and Water Sliding Angle （WSA） of 4^-6~ indicate that WBL surface is superhydrophobic. The combination of wax film and microstructure of WBL surface gives its surface excellent superhydrophobic property. Complex hierarchical patterns with features from sub-millimeter to micron-scale range are well reproduced. The reason for the absence of nanostructures is melting of plant epidermal wax during the curing process. The WCA values on artificial WBL and negative PDMS replica are 146~ ~ 3~ and 137~ ~ 2~, respectively, demonstrating preferable hydrophobicity. Differences in wetting behavior between natural leaves and artificial leaves originate from an inaccurate replication of the chemistry and structures of the three-dimensional wax projections on the leaf surface. Nevertheless, the morphological features of the leaf transferred to the replica improve signifi- cantly the hydrophobic properties of the replica when compared with the smooth PDMS reference. This study may provide an inspiration for the biomimetic design and construction of large area roughness-induced hydrophobic and anti-sticking material surface.

Fabrication and Characterization of Gecko-inspired Dry Adhesion, Superhydrophobicity and Wet Self-cleaning Surfaces

In this study, gecko-inspired polydimethylsiloxane （PDMS） microfiber surfaces were fabricated by combining Inductively Coupled Plasma （ICP） and micro-mold casting. The effect of roughness and surface energy of counterface on the adhesion of gecko-inspired microflber surfaces and its superhydrophobicity and wet self-cleaning were studied. The adhesion of gecko-inspired microfiber surfaces depended on the roughness of the eounterfaces due to the influences of contact area and interlocking mechanism. SEM images of interfaces between counterfaces with different roughness and gecko-inspired mi- crofiber surfaces revealed the matched and dis-matched contact directly. The gecko-inspired microfiber surface got the larger adhesive force from the higher surface energy counterface, which is consisted with Johnson-Kendall-Roberts （JKR） theory. The smaller dimension and lower duty ratio of microfibers on PDMS resulted in the increasing of Water Contact Angle （WCA） and the decreasing of Sliding Angle （SA） compared to those of smooth PDMS. Particularly, sample P-8-28-20 had the biggest WCA （155°） and SA （7°）, which displayed the superhydrophobicity and the best wet self-cleaning efficiency in all samples. The present studies showed that the roughness and surface energy of counterface both affected the adhesion of gecko-inspired microfiber surfaces. The smaller dimension and lower duty ratio of microfibers on PDMS endowed it with the superhydro- phobicity and the wet self-cleaning abilities.

Ag_(2)Se Complex Nanostructures with Photocatalytic Activity and Superhydrophobicity

Single-crystalline Ag_(2)Se complex nanostructures have been synthesized via a solvothermal route in which selenophene(C4H4Se)as a selenylation source reacts with AgNO3 at a temperature of 240°C.An orthorhombic phaseβ-Ag_(2)Se nanostructure was identified by X-ray diffraction(XRD),Raman spectroscopy,field emission scanning electron microscopy(FE-SEM),high resolution transmission electron microscopy(HRTEM),and photoluminescence(PL)spectroscopy.The wettability of the as-synthesizedβ-Ag_(2)Se nanostructure was studied by measurement of the water contact angle(CA).Static water CA values of over 150°were obtained,which can be attributed to theβ-Ag_(2)Se complex nanostructure having a combination of micro-and nanostructures.The superhydrophobic Ag_(2)Se nanostructure may find applications in self-cleaning.Additionally,the photocatalytic activity of the as-synthesizedβ-Ag_(2)Se nanostructure was evaluated by photodegradation of rhodamine B(RhB)dye under ultraviolet(UV)light irradiation.

Biomimetic Fabrication of Polymer Film with High Adhesive Superhydrophobicity by Duplicating Locust Wing Surface

Locust is a common flying insect. Locust wings were used as biomimetic templates to fabricate multi-functional polymer（polydimethylsiloxane, PDMS） films by soft lithography. The microstructure and wettability of the natural and artificial locust wing surfaces were investigated by means of a scanning electron microscope（SEM） and a video-based contact angle meter. The natural locust wing surface exhibits complicated hierarchical structures and high adhesive superhydrophobicity（contact angle 152°）. The prepared polymer film faithfully reproduces the surface microstructures of the bio-template, and displays a good hydrophobicity and high adhesion（contact angle 144°）. The complex wettability of the natural and artificial locust wing surfaces ascribes to the cooperative effect of hydrophobic composition and multi-dimensional rough microstructures. This work not only promotes our understanding of the wetting mechanism on bio-surfaces, but offers an inexpensive and effective approach for biomimetic fabrication of multi-functional interfacial materials.

Robustα-Fe_(2)O_(3)/Epoxy Resin Superhydrophobic Coatings for Anti-icing Property

α-Fe_(2)O_(3)/epoxy resin composite superhydrophobic coating was prepared withα-Fe_(2)O_(3) nanoparticles and epoxy resin by spin coating method.The coating without epoxy resin has higher contact angle(CA)and lower ice adhesion strength(IAS),but the mechanical properties are poor.Theα-Fe_(2)O_(3)/epoxy resin composite superhydrophobic coating exhibits good mechanical durability.In addition,compared with the bare aluminum substrate,the Ecorr of the composite coating is positive and the Jcorr is lower.The inhibition efficiency of the composite coating is as high as 99.98%in 3.5 wt%NaCl solution.The difference in the microstructure caused by the two preparation methods leads to the changes in mechanical properties and corrosion resistance of composite superhydrophobic coating.

Triboelectric‘electrostatic tweezers'for manipulating droplets on lubricated slippery surfaces prepared by femtosecond laser processing

The use of‘Electrostatic tweezers'is a promising tool for droplet manipulation,but it faces many limitations in manipulating droplets on superhydrophobic surfaces.Here,we achieve noncontact and multifunctional droplet manipulation on Nepenthes-inspired lubricated slippery surfaces via triboelectric electrostatic tweezers(TETs).The TET manipulation of droplets on a slippery surface has many advantages over electrostatic droplet manipulation on a superhydrophobic surface.The electrostatic field induces the redistribution of the charges inside the neutral droplet,which causes the triboelectric charged rod to drive the droplet to move forward under the electrostatic force.Positively or negatively charged droplets can also be driven by TET based on electrostatic attraction and repulsion.TET enables us to manipulate droplets under diverse conditions,including anti-gravity climb,suspended droplets,corrosive liquids,low-surface-tension liquids(e.g.ethanol with a surface tension of 22.3 mN·m^(-1)),different droplet volumes(from 100 nl to 0.5 ml),passing through narrow slits,sliding over damaged areas,on various solid substrates,and even droplets in an enclosed system.Various droplet-related applications,such as motion guidance,motion switching,droplet-based microreactions,surface cleaning,surface defogging,liquid sorting,and cell labeling,can be easily achieved with TETs.

Recent progress in bio-inspired macrostructure array materials with special wettability—from surface engineering to functional applications

Bio-inspired macrostructure array(MAA,size:submillimeter to millimeter scale)materials with special wettability(MAAMs-SW)have attracted significant research attention due to their outstanding performance in many applications,including oil repellency,liquid/droplet manipulation,anti-icing,heat transfer,water collection,and oil–water separation.In this review,we focus on recent developments in the theory,design,fabrication,and application of bio-inspired MAAMs-SW.We first review the history of the basic theory of special wettability and discuss representative structures and corresponding functions of some biological surfaces,thus setting the stage for the design and fabrication of bio-inspired MAAMs-SW.We then summarize the fabrication methods of special wetting MAAs in terms of three categories:additive manufacturing,subtractive manufacturing,and formative manufacturing,as well as their diverse functional applications,providing insights into the development of these MAAMs-SW.Finally,the challenges and directions of future research on bio-inspired MAAMs-SW are briefy addressed.Worldwide efforts,progress,and breakthroughs from surface engineering to functional applications elaborated herein will promote the practical application of bio-inspired MAAMs-SW.

Superhydrophobic Surface-Assisted Preparation of Microspheres and Supraparticles and Their Applications

Superhydrophobic surface(SHS) has been well developed, as SHS renders the property of minimizing the water/solid contact interface. Water droplets deposited onto SHS with contact angles exceeding 150°, allow them to retain spherical shapes, and the low adhesion of SHS facilitates easy droplet collection when tilting the substrate. These characteristics make SHS suitable for a wide range of applications. One particularly promising application is the fabrication of microsphere and supraparticle materials. SHS offers a distinct advantage as a universal platform capable of providing customized services for a variety of microspheres and supraparticles. In this review, an overview of the strategies for fabricating microspheres and supraparticles with the aid of SHS, including cross-linking process, polymer melting,and droplet template evaporation methods, is first presented. Then, the applications of microspheres and supraparticles formed onto SHS are discussed in detail, for example, fabricating photonic devices with controllable structures and tunable structural colors, acting as catalysts with emerging or synergetic properties, being integrated into the biomedical field to construct the devices with different medicinal purposes, being utilized for inducing protein crystallization and detecting trace amounts of analytes. Finally,the perspective on future developments involved with this research field is given, along with some obstacles and opportunities.