Fiber cladding dual channel surface plasmon resonance sensor based on S-type fiber

Fiber cladding surface plasmon resonance(SPR)sensors have few structures,and a clad SPR sensor based on S-type fiber is proposed in this paper.This new type of fiber cladding SPR sensor was formed by electrofusing an S-shaped structure on the fiber to couple the light in the fiber core to the cladding.In this paper,the effects of fiber parameters on the performance of the sensor were studied by simulation and experiment.Based on the conclusion that the smaller the core diameter is,the closer the working band of the SPR resonance is to long wavelengths,and that the geometric characteristics mean that a multimode fiber can receive the fiber cladding light from a small core diameter few-mode fiber,a dual channel SPR sensor with a double S-type fiber cascade was proposed.In the refractive index detection range of 1.333–1.385refractive index units(RIU),the resonant working band of channel I is 627.66 nm–759.78 nm,with an average sensitivity of 2540.77 nm/RIU,and the resonant working band of channel II is 518.24 nm–658.2 nm,with an average sensitivity of2691.54 nm/RIU.The processing method for the S-type fiber cladding SPR sensor is simple,effectively solving the problem of this type of SPR sensor structure and the difficult realization of a dual channel.The sensor is expected to be used in the fields of medical treatment and biological analysis.

Dual-channel fiber-optic surface plasmon resonance sensor with cascaded coaxial dual-waveguide D-type structure and microsphere structure

To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.

Using a Surface Plasmon Resonance Biosensor for Rapid Detection of Salmonella Typhimurium in Chicken Carcass

Chicken is one of the most popular meat products in the world. Salmonella Typhimurium is a common foodbome pathogens associated with the processing of poultry. An optical Surface Plasmon Resonance （SPR） biosensor was sensitive to the presence of Salmonella Typhimurium in chicken carcass. The Spreeta biosensor kits were used to detect Salmonella Typhimurium on chicken carcass successfully. A taste sensor like electronic tongue or biosensors was used to basically ＂taste＂ the object and differentiated one object from the other with different taste sensor signatures. The surface plasmon resonance biosensor has potential for use in rapid, real-time detection and identification of bacteria, and to study the interaction of organisms with dif- ferent antisera or other molecular species. The selectivity of the SPR biosensor was assayed using a series of antibody con- centrations and dilution series of the organism. The SPR biosensor showed promising to detect the existence of Salmonella Typhimurium at 1 x 106 CFU/ml. Initial results show that the SPR biosensor has the potential for its application in pathogenic bacteria monitoring. However, more tests need to be done to confirm the detection limitation.

Detection of Penicillin via Surface Plasmon Resonance Biosensor

A method of using Au colloid to capture the decomposed product of penicillin, penicillamine, on a surface plasmon resonance（SPR） biosensor for the quantitative determination of penicillin was developed. Based on the de-composition of penicillin to generate penicillamine and penilloaldehyde, a high sensitive biosensor for detecting penicillin was also developed. In our experiment, it was penicillamine rather than penicillin that has been measured. This is because penicillamine contains a functional group that makes it self-assembling on Au colloid to increase the molecular weight so as to improve the surface plasmon resonance signal. On a UV-Vis spectrophotometer, a high concentration of penicilliamine-Au complex was determined, indicating that penicillamine was already well combined with Au colloid. The method, using the combination of Au colloid with penicillamine, proved to detect penicillin.

Advances in Phase Detection Technique of Surface Plasmon Resonance Biosensor

Surface plasmon resonance (SPR) sensing is an optical method based on evanescent wave.SPR biosensor can detect interaction of label-free biomolecules in real-time.With further development,it can become a research instrument in proteomics.SPR biosensor can be divided intensity measurement and phase measurement,and the latter possesses higher sensitivity than the former one.This paper attempts to summarize the SPR phase detection theory,discuss the major developments,compare the merits and deficiencies of various methods,and look forward to future prospects.

Analysis of 17β-Estadiol from Sewage in Coastal Marine Environment by Surface Plasmon Resonance Technique

In this study, surface plasmon resonance （SPR） for monitoring 17β-eatradiol （E2） was developed. The small molecule E2 was immobilized on a CM5 sensor chip for an indirect competitive immunoassay to detect E2. The SPR response bahed on the antigen-antibody reaction was measured by injecting the sample solution into the flow system. The limitation of detection was 0.445 μg/L. The developed SPE-SPR system was applied to analyze the seawater samples. Recovery of E2 was 91.6%-93. 1%. Relative standard deviations（RSD） for the E2 assay were between 10.9%-15.1% （n = 3）. The range of determination of E2 samples from the sewage in the coastal marine environ-ment was between ND（lower than detection limit） and ca. 11.78 ng/L.

Characteristics of Surface Plasmon Resonance Imaging lnterferometer

In recent life science research,identifying and characterizing entire biomolecular interaction networks is prerequisite to understanding cellular processes on a molecular and biophysical level.A surface plasmon resonance (SPR) imaging interferometer based on spatial phase modulation detection is presented to meet this demand.In this method,the SPR sensing chip surface is illuminated with collimated parallel light beam,and a Wollaston prism is introduced into the reflected light path to produce the interference of polarized light reflected from SPR sensing chip.Information of biomolecular interactions can be obtained by extracting the phase change from the SPR interference patterns.Using our interferometer,we made experiments on a series concentration of NaCl solutions to investigate its detection range,linearity,sensitivity and resolution.The results indicate that the SPR imaging interferometer is mainly sufficient for biomolecular interaction detection.

Surface plasmon resonance sensor based on molecularly imprinted films for the detection of pentaerythritol tetranitrate （PETN）

A novel surface plasmon resonance （SPR） sensor based on molecularly imprinted films （MIFs） was developed for the detection of pentaerythritol tetranitrate （PETN）. In this work, the thin MIFs were formed on a gold sensor chip through thermal co-polymerization of functional mono- mers （methacrylic acid, MAA） and crosslinking monomers （ethylene glycol dimethacrylate, EGD- MA） in the presence of template molecules PETN. The template molecules PETN were subsequently removed from the MIFs simply by rinsing the MIFs with a mixture of acetonitrile and acetic acid 9：1 （ v/v）, thus the recognition sites were formed for specific detection of PETN. According to the mass coverage equation, the surface coverage of removed PETN from MIFs was about 10. 8 ng/mm~. The developed SPR sensor allowed for the detection of PETN at concentration down to 10-~~ mol/L. A control experiment utilizing an analogue cyclotrimethylenetrinitramine （RDX） showed MIFs＇ good selectivity to PETN.

Improvement of the Specificity of Surface Plasmon Resonance with BSA-modified Chip

A chip was modified with bovine serum albumin （BSA）, then interaction between glutathione （GSH） immobilized on the top of BSA and glutathione-S-transferase （GST） was examined, using surface plasmon resonance （SPR）. The SPR results showed that BSA-modified chip was effective not only in binding the target proteins but also in suppressing the nonspecific binding （NSB） of proteins.

Development and Application of Time-Resolved Surface Plasmon Resonance Spectrometer

Surface plasmon resonance (SPR) sensor, an optical sensor exploiting special electromagnetic waves-surface plasmon polaritons to probe interactions between an analyte in solution and a molecular recognition element immobilized on the SPR sensor surface, has been widely used in various realms, such as investigating biomolecular interactions and binding properties, detection of biological and chemical analytes, environmental monitoring, food safety and medical diagnostics. This paper reviews the development of SPR sensors and SPR commercial instruments, and emphatically introduces the time-resolved surface plasmon resonance (TR-SPR) techniques. The excellent performances of high sensitivity and rapid detection are easily achieved with TR-SPR spectrometer, whereas the traditional SPR spectrometer cannot be accomplished. Therefore, TR-SPR spectrometer is appropriate for real time analysis of bio-recognition events and small molecular dynamics. However, only two commercial TR-SPR instruments have been exhibited at present, Thermo FT-SPR 100 and Autolab ESPRIT (SPRINGLE). Unfortunately, the high-priced instruments are not suitable for extensive applications in laboratories at present. Herein, a novel commercial TR-SPR spectrometer has been introduced in this review.

Review of Fiber-Optic Localized Surface Plasmon Resonance Sensors:Geometries,Fabrication Technologies,and Bio-Applications

Localized surface plasmon resonance(LSPR)biosensors,which enable nanoscale confinement and manipulation of light,offer the enhanced sensitivity and electromagnetic energy localization.The integration of LSPR with the fiber-optic technology has led to the development of compact and versatile sensors for miniaturization and remote sensing.This comprehensive review explores various sensor configurations,fiber types,and geometric shapes,highlighting their benefits in terms of sensitivity,integration,and performance improvement.Fabrication techniques such as focused non-chemical bonding strategies and self-assembly of nanoparticles are discussed,providing control over nanostructure morphology and enhancing sensor performance.Bio-applications of fiber-optic LSPR(FOLSPR)sensors are detailed,specifically in biomolecular interactions and analysis of proteins,pathogens and cells,nucleic acids(DNA and RNA),and other small molecules(organic compounds and heavy metal ions).Surface modification and detection schemes are emphasized for their potential for label-free and real-time biosensing.The challenges and prospects of FOLSPR sensors are addressed,including the developments in sensitivity,fabrication techniques,and measurement reliability.Integration with emerging technologies such as nanomaterials is highlighted as a promising direction for future research.Overall,this review provides insights into the advancements and potential applications of FOLSPR sensors,paving the way for sensitive and versatile optical biosensing platforms in various fields.

基于SPR的重金属离子检测技术研究进展

重金属离子浓度的检测对于人体健康和环境科学等领域具有重要意义。与其它离子检测方法相比,表面等离子体共振(surface plasmon resonance,SPR)技术具有无标记,灵敏度高和检测限低等优点,为重金属离子监测领域带来了新的可能性。本文综述了SPR传感技术在重金属离子检测中的应用及其技术进展。首先介绍了SPR传感的技术原理;然后在传感材料的选择以及表面修饰等方面,针对铅、汞等有害重金属离子,重点阐述了对灵敏度、线性动态范围和特异性等指标的改进;最后介绍了SPR成像传感技术在检测速度、灵敏度等方面取得的重大进展,展望了SPR技术的发展前景。

Research on Fiber Optic Surface Plasmon R esonance.Biosensors:A Review

Due to the benefits of the high sensitivity,real-time response,no labeling requirement,and good selectivity,fiber optic sensors based on surface plasmon resonance(SPR)have gained popularity in biochemical sensing in recent years.The current research on such sensors is hot in enhancing sensitivity,improving detection accuracy,and achieving the detection of biochemical molecules.The goal of this work is to present a thorough overview of recent developments in the optical fiber SPR biosensor research.Firstly,it explores the basic principles and sensing structures of optical fiber SPR biosensors,focusing on four aspects.Subsequently,this paper introduces three fiber optic surface plasmon biosensors:SPR,localized surface plasmon resonance(LSPR),and long-range surface plasmon resonance(LRSPR).Each concept is explained from the perspective of the basic principles of fiber optic SPR biosensors.Furthermore,a classification of fiber optic SPR biosensors in health monitoring,food safety,environmental monitoring,marine detection,and other applications is introduced and analyzed.Eventually,this paper summarizes the current research directions of SPR biosensors.Meanwhile,it provides a prospective outlook on how fiber optic SPR sensors will develop in the future.

基于SPR效应的深刻蚀微开口双芯对称D型PCF传感器

为了进一步提升生物传感器传感性能,设计了一种基于表面等离子共振(SPR)效应的深刻蚀微开口双芯对称D型光子晶体光纤(PCF)传感器。该传感器采用堆叠、拉伸技术和化学气相沉积(CVD)技术制备,具有2种不同直径的气孔,且这2种气孔呈对称结构。介绍了采用该传感器的葡萄糖浓度检测系统原理,仿真分析了金属材料、气孔参数、抛光参数对传感器性能的影响。仿真结果表明,当折射率检测范围为1.26~1.41时,传感器的最大波长灵敏度、分辨率和葡萄糖浓度检测灵敏度分别可达24600 nm/RIU、4.06×10^(-6)RI U和2.73 nm/(g·L^(-1))。

Surface plasmon polaritons frequency-blue shift in low confinement factor excitation region

Surface plasmon polaritons'(SPPs')frequency blue shift is observed in finite-difference time-domain(FDTD)simulation of parallel electron excitation Au bulk structure.Comparing with cold dispersion of SPPs,an obvious frequency blue shift is obtained in low confinement region excitation simulation results.Then,according to SPPs'transverse attenuation characteristics,the excited frequency mode instead of cold dispersion corresponding frequency mode matches it.Thence,this excited mode is confirmed to be SPPs'mode.As is well known the lower the frequency,the smaller the confinement factor is and the lower the excitation efficiency,the wider the bandwidth of excited SPPs is.And considering the attenuation in whole structure,the excited surface field contains attenuation signal.In a low confinement factor region,the higher the SPPs'frequency,the higher the excitation efficiency is,while broadband frequency information obtained in attenuation signal provides high frequency information in stimulation signal.Thence,in the beam-wave interaction,as the signal oscillation time increases,the frequency of the oscillation field gradually increases.Thus,compared with cold dispersion,the frequency of excited SPP is blueshifted This hypothesis is verified by monitoring the time domain signal of excited field in low and high confinement factor regions and comparing them.Then,this frequency-blue shift is confirmed to have commonality of SPPs,which is independent of SPPs'material and structure.Finally,this frequency-blue shift is confirmed in an attenuated total reflection(ATR)experiment.Owing to frequency dependence of most of SPPs'devices,such as coherent enhancement radiation and enhancement transmission devices,the frequency-blue shift presented here is of great influence in the SPPs applications.

Photonic cavity enhanced high-performance surface plasmon resonance biosensor

Herein we propose a novel strategy to enhance surface plasmon resonance(SPR)by introducing a photonic cavity into a total-internal-reflection architecture.The photonic cavity,which is comprised of a highly reflective photonic crystal(PC),defect layers,and a gold(Au)film,enables Fabry–Perot(FP)resonances in the defect layers and therefore narrows the SPR resonance width in the metallic surface as well as increases the electric field intensity and penetration depth in the evanescent region.The fabricated sensor exhibits a 5.7-fold increase in the figure of merit and a higher linear coefficient as compared with the conventional Au-SPR sensor.The demonstrated PC/FP cavity/metal structure presents a new design philosophy for SPR performance enhancement.

Sensitivity enhancement of WS2-coated SPR-based optical fiber biosensor for detecting glucose concentration

In this paper,we propose a theoretical model of the surface plasmon resonance-based optical fiber biosensor for detecting glucose concentration.The Au/ZnO/WS2 multilayer film is coated around optical fiber.Compared with the conventional surface plasmon resonance sensor,WS2 material can increase the sensitivity of the biosensor.The absorption capacity of WS2 is used to load glucose oxidase by forming a sensitive area to recognize glucose.Refractive index of the solution is calculated and then the concentration of the glucose can be obtained by the correspondence between refractive index and glucose concentration.The highest sensitivity of the SPR biosensor with a structure of 40-nm Au/5-nm ZnO/14 layers of WS2 is 4310 nm/RIU.The proposed WS2-based SPR fiber biosensor has a unique effect on the detection of glucose concentration.It is expected to have potential applications in future medical blood glucose concentration detection.

Imaging Array SPR Biosensor Immunoassays for Sulfamethoxazole and Sulfamethazine

A homemade array surface plasmon resonance （SPR）-based imaging biosensor was used to develop sensitive and fast immunoassays to determine sulfamethoxazole （SMOZ） and sulfamethazine （SMT） in buffer. Two conjugations of sulfonamide-bovine serum albumin （BSA） were separately immobilized on two different rows of the array chip with one row as reference. The immobilization was carried out in the instrument to monitor the quantity of the conjugations immobilized. The antibody mixed with the sulfonamide in the buffer was injected over the surface of the chip to get a relative response which was inversely proportional to the concentration of the sulfonamide in the PBS buffer. Two calibration curves were constructed and the limit of detection for sufamethoxazole in buffer was 3.5 ng/mL and for sulfamethazine 0.6 ng/mL. The stability and specificity of the antibody were also studied. The monoclonal antibody did not bind with BSA.

Comparison of Surface-enhanced Raman Scattering Spectra of Two Kinds of Silver Nanoplate Films

Surface-enhanced Raman scattering（SERS） spectra of different silver nanoplate selt-assembled tllmS at different excitation wavelengths were fairly compared. Shape conversion from silver nanoprisms to nanodisks on slides was in situ carried out. The SERS spectra of 4-mercaptopyridine（4-MPY） on these anisotropic silver nanopar- ticle self-assembled films present that strong enhancement appeared when the excitation line and the surface plasmon resonance（SPR） band of silver substrate overlapped. In this model, the influence of the crystal planes of silver na- noplates on SERS enhancement could be ignored because the basal planes were nearly unchanged in two kinds of silver nanoplate self-assembled films.

纳米金用于SPR传感器检测小分子的研究进展

近年来,表面等离子体共振(Surface Plasmon Resonance,SPR)技术因具有可实时、动态监测SPR芯片上分子间相互作用的优点,而广泛应用于小分子传感检测领域。信号放大是小分子SPR传感器的重要研究内容,它决定小分子能否被检出及传感器灵敏度,因此信号放大技术对其发展非常重要。纳米金因其高电子密度、介电特性及易修饰等特性而用于多种传感器的信号放大。重点介绍近5年来纳米金在小分子SPR传感器方面的应用情况,旨在为小分子SPR传感器的进一步发展提供参考依据。