Noise Reduction Technique Applied to the Multichannel Analysis of Surface Waves

This paper shows the presence of noises and technique to reduce these noises during the surface wave analysis. The frequency-dependent properties of Rayleigh-type surface waves can be used for imaging and characterizing the shallow subsurface. Interference by coherent source-generated noise inhibits the reliability of shear-wave velocities determined through inversion of the phase velocities of Rayleigh waves. Among these interferences by non-planar, non-fundamental mode Rayleigh waves （noise） are body waves, scattered and non-source-generated surface waves, and highermode surface waves. For the reduction of noise, the filtering technique is implemented in this paper for the multichannel analysis of surface wave method （MASW）. With the de-noising technique during the MASW method, more robust and reliable outcome is achieved. The significance of this paper is to obtain pre-awareness about noises during surface wave analysis and take better outcomes with denoising performance in near surface soil investigations.

Limit analysis method for active earth pressure on laggings between stabilizing piles

Stabilizing pile is a kind of earth shoring structure frequently used in slope engineering. When the piles have cantilever segments above the ground,laggings are usually installed to avoid collapse of soil between piles. Evaluating the earth pressure acting on laggings is of great importance in design process.Since laggings are usually less stiff than piles,the lateral pressure on lagging is much closer to active earth pressure. In order to estimate the lateral earth pressure on lagging more accurately,first,a model test of cantilever stabilizing pile and lagging systems was carried out. Then,basing the experimental results a three-dimensional sliding wedge model was established. Last,the calculation process of the total active force on lagging is presented based on the kinematic approach of limit analysis. A comparison is made between the total active force on lagging calculated by the formula presented in this study and the force on a same-size rigid retaining wall obtained from Rankine's theory. It is found that the proposed method fits well with the experimental results.Parametric studies show that the total active force on lagging increases with the growth of the lagging height and the lagging clear span; while decreases asthe soil internal friction angle and soil cohesion increase.

Reliability and sensitivity analyses of HPT blade-tip radial running clearance using multiply response surface model

To reasonably design the blade-tip radial running clearance(BTRRC) of high pressure turbine and improve the performance and reliability of gas turbine, the multi-object multi-discipline reliability sensitivity analysis of BTRRC was accomplished from a probabilistic prospective by considering nonlinear material attributes and dynamic loads. Firstly, multiply response surface model(MRSM) was proposed and the mathematical model of this method was established based on quadratic function. Secondly, the BTRRC was decomposed into three sub-components(turbine disk, blade and casing), and then the single response surface functions(SRSFs) of three structures were built in line with the basic idea of MRSM. Thirdly, the response surface function(MRSM) of BTRRC was reshaped by coordinating SRSFs. From the analysis, it is acquired to probabilistic distribution characteristics of input-output variables, failure probabilities of blade-tip clearance under different static blade-tip clearances δ and major factors impacting BTRRC. Considering the reliability and efficiency of gas turbine, δ=1.87 mm is an optimally acceptable option for rational BTRRC. Through the comparison of three analysis methods(Monte Carlo method, traditional response surface method and MRSM), the results show that MRSM has higher accuracy and higher efficiency in reliability sensitivity analysis of BTRRC. These strengths are likely to become more prominent with the increasing times of simulations. The present study offers an effective and promising approach for reliability sensitivity analysis and optimal design of complex dynamic assembly relationship.

Optimization of vinegar-steaming process for Wuweizi (Fructus Schisandrae Chinensis) with response surface method

OBJECTIVE:To optimize the vinegar-steaming process of Wuweizi(Fructus Schisandrae Chinensis)using the response surface method(RSM)based on the Box-Behnken design.METHODS:A regression model was constructed with the response variables,the content of Deoxyschizandrin,and the three explanatory factors:length of steaming time,the quantity of vinegar and length of moistening time to evaluate the effects on the processing of Wuweizi(Fructus SchisandraeChinensis).RESULTS:There was a linear relationship between the content of Deoxyschizandrin and the three explanatory factors.When the steaming time was5.49 h,with 2.365 g of vinegar added and a moistening time of 4.13 h,the content of Deoxyschizandrin reached the maximum predicted value of0.1076%,and under the conditions the average content of Deoxyschizandrin was 0.1058%.CONCLUSION:The correlation coefficient of thenonlinear mathematical model was relatively high and the model matched the data well,potentially providing a method for the study of the steaming process.