Low-cost and flexible solid polymer electrolytes are promising in all-solid-state Li-metal batteries with high energy density and safety.However,both the low room-temperature ionic conductivities and the small Li^(+)t...Low-cost and flexible solid polymer electrolytes are promising in all-solid-state Li-metal batteries with high energy density and safety.However,both the low room-temperature ionic conductivities and the small Li^(+)transference number of these electrolytes significantly increase the internal resistance and overpotential of the battery.Here,we introduce Gd-doped CeO_(2) nanowires with large surface area and rich surface oxygen vacancies to the polymer electrolyte to increase the interaction between Gd-doped CeO_(2) nanowires and polymer electrolytes,which promotes the Li-salt dissociation and increases the concentration of mobile Li ions in the composite polymer electrolytes.The optimized composite polymer electrolyte has a high Li-ion conductivity of 5×10^(-4)4 S cm^(-1) at 30℃ and a large Li+transference number of 0.47.Moreover,the composite polymer electrolytes have excellent compatibility with the metallic lithium anode and high-voltage LiNi_(0.8)Mn _(0.1)Co_(0.1)O_(2)(NMC)cathode,providing the stable cycling of all-solid-state batteries at high current densities.展开更多
Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）,...Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）, laser Raman spectroscopy, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR） and X-ray absorption fine structure （XAFS） spectroscopy. Both XRD and Raman spectroscopy only detect the existence of Co3O4 crystallites in all catalysts. However, XPS results indicate that excess Co2＋ ions are present on the surface of Co3O4 in Co3O4（200）/Si02 as compared with bulk Co3O4. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co3O4 in Co3O4（200）/SiO2, and XAFS results demonstrate that Co3O4 in Co3O4（200）/SIO2 contains excess Co2＋. Increasing calcination temperature results in oxidation of excess Co2＋ and the decrease of the concentration of surface oxygen vacancies, consequently the for- mation of stoichiometric Co3O4 on supported catalysts. Among all Co3O4/SiO2 catalysts, Co3O4（200）/SiO2 exhibits the best catalytic performance towards CO oxidation, demonstrating that excess Co2＋ and surface oxygen vacancies can enhance the catalytic activity of Co3O4 towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silicasupported Co3O4 catalysts and highlight the important role of surface oxygen vacancies on Co3O4.展开更多
Oxygen deficiency has crucial effects on the crystal structure and electrochemical performance of spinel oxide lithium electrode materials such as LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)cathode.In particular,the oxygen stoichio...Oxygen deficiency has crucial effects on the crystal structure and electrochemical performance of spinel oxide lithium electrode materials such as LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)cathode.In particular,the oxygen stoichiometry on the crystal surface differs from that on the crystal interior in LNMO.The detection of local oxygen loss in LNMO and its correlation with the crystal structure and the cycling stability of LNMO remain challenging.In this study,the effect of oxygen deficiency in LNMO controlled by sintering temperature on the surface crystal structure and electrochemical performance of LNMO is comprehensively investigated.The high concentration of oxygen vacancies segregates at the surface regions of LNMO forming a thin rock‐salt and/or deficient spinel surface layer.The atomic‐level surface structure reconstruction was demonstrated by annular dark‐field and annular brightfield techniques.For the synthesis of LNMO,the higher sintering temperature results in higher crystallinity but the higher oxygen deficiency in LNMO.The high crystallinity of LNMO would increase the thermal stability of LNMO cathodes while the high content of oxygen deficiency would decrease the surface structural stability of LNMO.Therefore,the LNMO sintered at a medium temperature of 850°C achieved the best capacity retention.The results suggest a competitive function mechanism between oxygen stoichiometry and the crystallinity of LNMO on the cycling performance of LNMO.展开更多
Photocatalytic degradation of gaseous pollutants on Bi-based semiconductors under solar lightirradiation has attracted significant attention.However,their application in gaseous straight-chainalkane purification is st...Photocatalytic degradation of gaseous pollutants on Bi-based semiconductors under solar lightirradiation has attracted significant attention.However,their application in gaseous straight-chainalkane purification is still rare.Here,a series of Bi/BiOBr composites were solvothermally synthe-sized and applied in solar-light-driven photocatalytic degradation of gaseous n-hexane.The charac-terization results revealed that both increasing number of functional groups of alcohol solvent(from methanol and ethylene glycol to glycerol)and solvothermal temperature(from 160 and 180to 200℃)facilitated the in-situ formation of metallic Bi nanospheres on BiOBr nanoplates withexposed(110)facets.Meanwhile,chemical bonding between Bi and BiOBr was observed on theseexposed facets that resulted in the formation of surface oxygen vacancy.Furthermore,the synergis-tic effect of optimum surface oxygen vacancy on exposed(110)facets led to a high visible light re-sponse,narrow band gap,great photocurrent,low recombination rate of the charge carriers,andstrong·O2-and h*formation,all of which resulted in the highest removal efficiency of 97.4%within120 min of 15 ppmv of n-hexane on Bi/BiOBr.Our findings efficiently broaden the application ofBi-based photocatalysis technology in the purification of gaseous straight-chain pollutants emittedby the petrochemical industry.展开更多
Density functional theory is used to investigate the surface structures and the energies of two possible terminated LaAlO3 （001） surfaces with oxygen vacancies, i.e. LaO- and AlO2-terminated surfaces. The large disp...Density functional theory is used to investigate the surface structures and the energies of two possible terminated LaAlO3 （001） surfaces with oxygen vacancies, i.e. LaO- and AlO2-terminated surfaces. The large displacements of ions, deviated from their crystalline sites, can lead to the formation of the surface rumpling. From thermodynamics analysis, the AlO2-terminated surface with oxygen-vacancies is less stable than the LaO-terminated one. Some states in the gap lie under the Fermi level by about -1eV in the LaO-terminated surface with oxygen vacancies. For the AlO2- terminated oxygen-vacancy surface, some O 2p states move into the mid-gap region and become partially unoccupied. The two types of termination surfaces exhibit conduction related to oxygen vacancies. Our results can contribute to the application of LAO films to high dielectric constant materials.展开更多
To optimize the electronic structure of photocatalyst,a facile one‐step approach is developed for the simultaneous realization of Zn‐doping and surface oxygen vacancies(SOVs)formation on SnO_(2).The Zn‐doped SnO_(2...To optimize the electronic structure of photocatalyst,a facile one‐step approach is developed for the simultaneous realization of Zn‐doping and surface oxygen vacancies(SOVs)formation on SnO_(2).The Zn‐doped SnO_(2)with abundant SOVs exhibits efficient and stable performance for photocatalytic degradation of toluene under both low and high relative humidity.Experimental and theoretical calculations results show that the synergistic effects of Zn‐doping and SOVs on SnO_(2)can considerably boost the charge transfer and separation efficiency.Utilizing the in situ DRIFTS and theoretical calculations methods,it is revealed that the benzene ring of toluene is opened at benzoic acid on the SnO_(2)surface and selectively at benzaldehyde on the Zn‐doped SnO_(2)surface.This implies that Zn‐doped SnO_(2)photocatalysts shorten the pathway of toluene degradation,and toxic intermediates can be significantly inhibited.This work could provide a promising and sustainable route for safe and efficient removal of aromatic VOCs with photocatalytic technology.展开更多
Semiconductors-based heterogeneous photocatalytic water splitting has been extensively studied,but it still remains challenging to accelerate the separation of electron-hole pairs and facilitate the reaction kinetics....Semiconductors-based heterogeneous photocatalytic water splitting has been extensively studied,but it still remains challenging to accelerate the separation of electron-hole pairs and facilitate the reaction kinetics.Here we report a general strategy to fabricate highly efficient Pt/TiO_(2)photocatalyst by coupling the Pt co-catalysts and surface oxygen vacancies(VO)of TiO_(2).TiO_(2)was pre-modified with alkali or alkaline earth metals ion solutions,which produce a large number of surface hydroxyl on TiO_(2).Subsequently,the photodeposited Pt sub-nanoparticles substitute surface hydroxyl and induce surface VO on TiO_(2).The coupling of Pt and surface VO on TiO_(2)can accelerate the extraction of photo-charges through the interaction of Pt-VO-Ti bonds and reduce the hydrogen evolution barrier,thereby promoting the photocatalytic activity.The synthesized Pt-VO-TiO_(2)sample exhibits a photocatalytic hydrogen evolution activity as high as 1.5 L·g^(−1)·h^(−1),which is 2.2 times that of traditional Pt/TiO_(2).Our findings indepth understand the synergistic effect of co-catalysts and defects on photocatalysis and open up new possibilities for achieving robust photocatalytic water splitting.展开更多
This study investigates the photodegradation of the organic dye rhodamine B by Ag‐nanoparticlecontaining BiVO4catalysts under different irradiation conditions.The catalysts consist of Ag nanoparticles deposited on ox...This study investigates the photodegradation of the organic dye rhodamine B by Ag‐nanoparticlecontaining BiVO4catalysts under different irradiation conditions.The catalysts consist of Ag nanoparticles deposited on oxygen‐vacancy‐containing BiVO4.The morphology of the BiVO4is olive shaped,and it has a uniform size distribution.The BiVO4possesses a high oxygen vacancy density,and the resulting Ag nanoparticle‐BiVO4catalyst exhibits higher photocatalytic activity than BiVO4.The RhB degradation by the Ag nanoparticle‐BiVO4catalyst is99%after100min of simulated solar irradiation.BiVO4containing oxygen vacancies as a rationally designed support extends the catalyst response into the near‐infrared region,and facilitates the trapping and transfer of plasmonic hot electrons.The enhanced photocatalytic efficiency is attributed to charge transfer from the BiVO4to Ag nanoparticles,and surface plasmon resonance of the Ag nanoparticles.These insights into electron‐hole separation and charge transfer may arouse interest in solar‐driven wastewater treatment and water splitting.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.展开更多
Photocatalytic nitrogen reduction for the green synthesis of ammonia at ambient conditions has been slowed by the narrow light harvesting range,low activity and high charge recombination of photocatalysts.Plasmonic se...Photocatalytic nitrogen reduction for the green synthesis of ammonia at ambient conditions has been slowed by the narrow light harvesting range,low activity and high charge recombination of photocatalysts.Plasmonic semiconducting nanomaterials are becoming the promising candidates for nitrogen photofixation because of the broad absorption spectrum,rich defects and hot carriers.In the present study,plasmonic SrMoO_(4) is developed by regulating the concentration of oxygen vacancies that are accompanied in the reduction process from Mo^(6+) to Mo^(5+).The stable and tunable localized surface plasmon resonance(LSPR)absorption in visible and near infrared light range makes the wide bandgap SrMoO_(4) utilize the solar energy more efficiently.Energetic electrons from both the intrinsic band excitation and the LSPR excitation enable the reduction of dinitrogen molecules thermodynamically in ultrapure water to ammonia.This work provides a unique clue to design efficient photocatalysts for nitrogen fixation.展开更多
The interaction of reactants with catalysts has always been an important subject for catalytic reactions.As a promising catalyst with versatile applications,titania has been intensively studied for decades.In this wor...The interaction of reactants with catalysts has always been an important subject for catalytic reactions.As a promising catalyst with versatile applications,titania has been intensively studied for decades.In this work we have investigated the role of bridge bonded oxygen vacancy(O_(v))in methyl groups and carbon monoxide(CO)adsorption on rutile TiO_(2)(110)(R-TiO_(2)(110))with the temperature programmed desorption technique.The results show a clear different tendency of the desorption of methyl groups adsorbed on bridge bonded oxygen(O_(b)),and CO molecules on the five coordinate Ti^(4+)sites(Ti_(5c))as the Ovconcentration changes,suggesting that the surface defects may have crucial influence on the absorption of species on different sites of R-TiO_(2)(110).展开更多
A model for describing the adsorption process of hydrogen on surface of tungsten oxide was proposed based on the first-principle calculations. Multiple factors such as type of active surface, adsorption site and distr...A model for describing the adsorption process of hydrogen on surface of tungsten oxide was proposed based on the first-principle calculations. Multiple factors such as type of active surface, adsorption site and distribution of oxygen vacancies were considered to evaluate the hydrogen adsorption capability of tungsten oxide. The adsorption Gibbs free energies, electronic structures and bonding characteristics under various conditions were examined to reveal the influence of oxygen vacancies on the surface. It is found that the capability of hydrogen adsorption of tungsten oxide can be significantly enhanced by adjusting the oxygen vacancy on the outermost layer of certain active surfaces. The modeling predicts that the surface structure stability and gas adsorption ability of tungsten oxide can be simultaneously improved through the formation of W–H bonds. The proposed strategy for moderating surface provides a new approach to obtain excellent gas-sensitive metal oxide materials.展开更多
The behavior of oxygen on ceria surfaces is closely related with the applications of ceria as a catalyst and oxygen conductor in solid-oxide fuel cells. Here, the atomic configurations of oxygen adatoms and vacancies ...The behavior of oxygen on ceria surfaces is closely related with the applications of ceria as a catalyst and oxygen conductor in solid-oxide fuel cells. Here, the atomic configurations of oxygen adatoms and vacancies on the(110) surface of CeO_2 have been studied combining aberration-corrected transmission electron microscopy and first-principles calculations. The oxygen adatoms were estimated to be located on top of Ce atoms with 50% coverage, forming a c(2×2) reconstruction. The oxygen vacancies can form stable configuration, with the Ce atoms partly reduced.展开更多
Recently, MAX phases show great potential in lithium-ion uptake due to their excellent electrical conductivity and unique lamellar-structure accommodating lithium ions. However, the reports about MAX electrodes for li...Recently, MAX phases show great potential in lithium-ion uptake due to their excellent electrical conductivity and unique lamellar-structure accommodating lithium ions. However, the reports about MAX electrodes for lithium-ion battery up to now are relatively low. Herein we report the preparation of surface oxygen-deficient Ti2SC with abundant oxygen vacancies by a facile surface engineering method. When using as a lithium storage anode, this oxygen-deficient Ti2SC delivers a high capacity of 350 m Ah/g at a current density of 400 m A/g as well as excellent rate performance, doubling the capacity compared to that of Ti2SC without oxygen vacancies. Confirmed by electrochemical impedance spectroscopy(EIS)and kinetic mechanism analyses, after reducing surface oxides and generation of oxygen vacancies, the as-received Ti2SC exhibits higher electrical conductivity and faster lithium ion diffusion. Thus this work offers a facial and effective strategy of optimizing the surface structure of MAX phases, further to achieve an enhanced lithium-ion uptake for lithium-ion batteries or capacitors.展开更多
Surface oxygen vacancy defects of mesoporous CeO_(2)nanosheets assembled microspheres(D-CeO_(2))are engineered by polymer precipitation,hydrothermal and surface hydrogenation strategies.The resultant D-CeO_(2)with a m...Surface oxygen vacancy defects of mesoporous CeO_(2)nanosheets assembled microspheres(D-CeO_(2))are engineered by polymer precipitation,hydrothermal and surface hydrogenation strategies.The resultant D-CeO_(2)with a main pore diameter of 9.3 nm has a large specific surface area(~102.3 m^(2)/g)and high thermal stability.The mesoporous nanosheets assembled microsphere structure prevents the nanosheets from aggregation,which is beneficial to effective mass transfer and shortens the migration distance of charge carriers.After surface hydrogenation,the photoresponse extends to long wavelength region,combing with the band gap from 2.63 eV reduced to 2.39 eV.Under AM 1.5 G radiation,the photocatalytic degradation rate of tetracycline(TC)can be up to 99.99%,which is three times as high as that of pristine CeO_(2)microspheres.The excellent solar-driven photocatalytic performance can be attributed to the efficient surface oxygen vacancy engineering and the mesoporous nanosheets assembled microsphere structure,which narrows the band gap,shortens the migration distance of carriers,promotes the spatial separation of photogenerated electron-hole pairs and favors mass transfer.The strategy provides new insights for fabricating other high-efficient oxide photocatalysts.展开更多
It is known that exposed surface determines material’s performance.WO3 is widely used in gas sensing and its working surface is proposed to control its sensitivity.However,the working surface,or most exposed surface ...It is known that exposed surface determines material’s performance.WO3 is widely used in gas sensing and its working surface is proposed to control its sensitivity.However,the working surface,or most exposed surface with detailed surface structure remain unclear.In this paper,DFT calculation confirmed that oxygen vacancy O-terminated surface is the most exposed hexagonal WO3(001)surface,judging from competitive adsorption of CO and O2,working surface determination for CO sensing and comparison of oxygen vacancy formation ene rgies on different h-WO3(001)surfaces.It is found that DFT can be a useful alternate for exposed surface determination.Our results provide new perspectives and performance explanations for material research.展开更多
基金This work was supported by the National Natural Science Foundation of China (51973157,61904123)the Tianjin Natural Science Foundation (18JCQNJC02900)+3 种基金the Special Grade of the Financial Support from the China Postdoctoral Science Foundation (2020T130469)the Sci-ence and Technology Plans of Tianjin (19PTSYJC00010)the Science&Technol-ogy Development Fund of Tianjin Education Commission for Higher Education (2018KJ196)State Key Laboratory of Membrane and Membrane Separation,Tiangong University.
文摘Low-cost and flexible solid polymer electrolytes are promising in all-solid-state Li-metal batteries with high energy density and safety.However,both the low room-temperature ionic conductivities and the small Li^(+)transference number of these electrolytes significantly increase the internal resistance and overpotential of the battery.Here,we introduce Gd-doped CeO_(2) nanowires with large surface area and rich surface oxygen vacancies to the polymer electrolyte to increase the interaction between Gd-doped CeO_(2) nanowires and polymer electrolytes,which promotes the Li-salt dissociation and increases the concentration of mobile Li ions in the composite polymer electrolytes.The optimized composite polymer electrolyte has a high Li-ion conductivity of 5×10^(-4)4 S cm^(-1) at 30℃ and a large Li+transference number of 0.47.Moreover,the composite polymer electrolytes have excellent compatibility with the metallic lithium anode and high-voltage LiNi_(0.8)Mn _(0.1)Co_(0.1)O_(2)(NMC)cathode,providing the stable cycling of all-solid-state batteries at high current densities.
文摘Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）, laser Raman spectroscopy, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR） and X-ray absorption fine structure （XAFS） spectroscopy. Both XRD and Raman spectroscopy only detect the existence of Co3O4 crystallites in all catalysts. However, XPS results indicate that excess Co2＋ ions are present on the surface of Co3O4 in Co3O4（200）/Si02 as compared with bulk Co3O4. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co3O4 in Co3O4（200）/SiO2, and XAFS results demonstrate that Co3O4 in Co3O4（200）/SIO2 contains excess Co2＋. Increasing calcination temperature results in oxidation of excess Co2＋ and the decrease of the concentration of surface oxygen vacancies, consequently the for- mation of stoichiometric Co3O4 on supported catalysts. Among all Co3O4/SiO2 catalysts, Co3O4（200）/SiO2 exhibits the best catalytic performance towards CO oxidation, demonstrating that excess Co2＋ and surface oxygen vacancies can enhance the catalytic activity of Co3O4 towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silicasupported Co3O4 catalysts and highlight the important role of surface oxygen vacancies on Co3O4.
基金National Natural Science Foundation of China,Grant/Award Numbers:22075003,22090043,U1930401,U2030206。
文摘Oxygen deficiency has crucial effects on the crystal structure and electrochemical performance of spinel oxide lithium electrode materials such as LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)cathode.In particular,the oxygen stoichiometry on the crystal surface differs from that on the crystal interior in LNMO.The detection of local oxygen loss in LNMO and its correlation with the crystal structure and the cycling stability of LNMO remain challenging.In this study,the effect of oxygen deficiency in LNMO controlled by sintering temperature on the surface crystal structure and electrochemical performance of LNMO is comprehensively investigated.The high concentration of oxygen vacancies segregates at the surface regions of LNMO forming a thin rock‐salt and/or deficient spinel surface layer.The atomic‐level surface structure reconstruction was demonstrated by annular dark‐field and annular brightfield techniques.For the synthesis of LNMO,the higher sintering temperature results in higher crystallinity but the higher oxygen deficiency in LNMO.The high crystallinity of LNMO would increase the thermal stability of LNMO cathodes while the high content of oxygen deficiency would decrease the surface structural stability of LNMO.Therefore,the LNMO sintered at a medium temperature of 850°C achieved the best capacity retention.The results suggest a competitive function mechanism between oxygen stoichiometry and the crystallinity of LNMO on the cycling performance of LNMO.
文摘Photocatalytic degradation of gaseous pollutants on Bi-based semiconductors under solar lightirradiation has attracted significant attention.However,their application in gaseous straight-chainalkane purification is still rare.Here,a series of Bi/BiOBr composites were solvothermally synthe-sized and applied in solar-light-driven photocatalytic degradation of gaseous n-hexane.The charac-terization results revealed that both increasing number of functional groups of alcohol solvent(from methanol and ethylene glycol to glycerol)and solvothermal temperature(from 160 and 180to 200℃)facilitated the in-situ formation of metallic Bi nanospheres on BiOBr nanoplates withexposed(110)facets.Meanwhile,chemical bonding between Bi and BiOBr was observed on theseexposed facets that resulted in the formation of surface oxygen vacancy.Furthermore,the synergis-tic effect of optimum surface oxygen vacancy on exposed(110)facets led to a high visible light re-sponse,narrow band gap,great photocurrent,low recombination rate of the charge carriers,andstrong·O2-and h*formation,all of which resulted in the highest removal efficiency of 97.4%within120 min of 15 ppmv of n-hexane on Bi/BiOBr.Our findings efficiently broaden the application ofBi-based photocatalysis technology in the purification of gaseous straight-chain pollutants emittedby the petrochemical industry.
基金Project supported by the National Science Fund for distinguished Young Scholars of China (Grant No 50425207)
文摘Density functional theory is used to investigate the surface structures and the energies of two possible terminated LaAlO3 （001） surfaces with oxygen vacancies, i.e. LaO- and AlO2-terminated surfaces. The large displacements of ions, deviated from their crystalline sites, can lead to the formation of the surface rumpling. From thermodynamics analysis, the AlO2-terminated surface with oxygen-vacancies is less stable than the LaO-terminated one. Some states in the gap lie under the Fermi level by about -1eV in the LaO-terminated surface with oxygen vacancies. For the AlO2- terminated oxygen-vacancy surface, some O 2p states move into the mid-gap region and become partially unoccupied. The two types of termination surfaces exhibit conduction related to oxygen vacancies. Our results can contribute to the application of LAO films to high dielectric constant materials.
文摘To optimize the electronic structure of photocatalyst,a facile one‐step approach is developed for the simultaneous realization of Zn‐doping and surface oxygen vacancies(SOVs)formation on SnO_(2).The Zn‐doped SnO_(2)with abundant SOVs exhibits efficient and stable performance for photocatalytic degradation of toluene under both low and high relative humidity.Experimental and theoretical calculations results show that the synergistic effects of Zn‐doping and SOVs on SnO_(2)can considerably boost the charge transfer and separation efficiency.Utilizing the in situ DRIFTS and theoretical calculations methods,it is revealed that the benzene ring of toluene is opened at benzoic acid on the SnO_(2)surface and selectively at benzaldehyde on the Zn‐doped SnO_(2)surface.This implies that Zn‐doped SnO_(2)photocatalysts shorten the pathway of toluene degradation,and toxic intermediates can be significantly inhibited.This work could provide a promising and sustainable route for safe and efficient removal of aromatic VOCs with photocatalytic technology.
基金supported by the National Natural Science Foundation of China(Nos.51802171,52072197,and 21905154)Outstanding Youth Foundation of Shandong Province,China(No.ZR2019JQ14)+2 种基金Youth Innovation and Technology Foundation of Shandong Higher Education Institutions,China(No.2019KJC004)Major Scientific and Technological Innovation Project(No.2019JZZY020405)Taishan Scholar Program,Major Basic Research Program of Natural Science Foundation of Shandong Province under Grant(No.ZR2020ZD09).
文摘Semiconductors-based heterogeneous photocatalytic water splitting has been extensively studied,but it still remains challenging to accelerate the separation of electron-hole pairs and facilitate the reaction kinetics.Here we report a general strategy to fabricate highly efficient Pt/TiO_(2)photocatalyst by coupling the Pt co-catalysts and surface oxygen vacancies(VO)of TiO_(2).TiO_(2)was pre-modified with alkali or alkaline earth metals ion solutions,which produce a large number of surface hydroxyl on TiO_(2).Subsequently,the photodeposited Pt sub-nanoparticles substitute surface hydroxyl and induce surface VO on TiO_(2).The coupling of Pt and surface VO on TiO_(2)can accelerate the extraction of photo-charges through the interaction of Pt-VO-Ti bonds and reduce the hydrogen evolution barrier,thereby promoting the photocatalytic activity.The synthesized Pt-VO-TiO_(2)sample exhibits a photocatalytic hydrogen evolution activity as high as 1.5 L·g^(−1)·h^(−1),which is 2.2 times that of traditional Pt/TiO_(2).Our findings indepth understand the synergistic effect of co-catalysts and defects on photocatalysis and open up new possibilities for achieving robust photocatalytic water splitting.
基金supported by the National Natural Science Foundation of China(21476033)~~
文摘This study investigates the photodegradation of the organic dye rhodamine B by Ag‐nanoparticlecontaining BiVO4catalysts under different irradiation conditions.The catalysts consist of Ag nanoparticles deposited on oxygen‐vacancy‐containing BiVO4.The morphology of the BiVO4is olive shaped,and it has a uniform size distribution.The BiVO4possesses a high oxygen vacancy density,and the resulting Ag nanoparticle‐BiVO4catalyst exhibits higher photocatalytic activity than BiVO4.The RhB degradation by the Ag nanoparticle‐BiVO4catalyst is99%after100min of simulated solar irradiation.BiVO4containing oxygen vacancies as a rationally designed support extends the catalyst response into the near‐infrared region,and facilitates the trapping and transfer of plasmonic hot electrons.The enhanced photocatalytic efficiency is attributed to charge transfer from the BiVO4to Ag nanoparticles,and surface plasmon resonance of the Ag nanoparticles.These insights into electron‐hole separation and charge transfer may arouse interest in solar‐driven wastewater treatment and water splitting.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.
文摘Photocatalytic nitrogen reduction for the green synthesis of ammonia at ambient conditions has been slowed by the narrow light harvesting range,low activity and high charge recombination of photocatalysts.Plasmonic semiconducting nanomaterials are becoming the promising candidates for nitrogen photofixation because of the broad absorption spectrum,rich defects and hot carriers.In the present study,plasmonic SrMoO_(4) is developed by regulating the concentration of oxygen vacancies that are accompanied in the reduction process from Mo^(6+) to Mo^(5+).The stable and tunable localized surface plasmon resonance(LSPR)absorption in visible and near infrared light range makes the wide bandgap SrMoO_(4) utilize the solar energy more efficiently.Energetic electrons from both the intrinsic band excitation and the LSPR excitation enable the reduction of dinitrogen molecules thermodynamically in ultrapure water to ammonia.This work provides a unique clue to design efficient photocatalysts for nitrogen fixation.
基金supported by the National Natural Science Foundation of China (No.21973084 and No.21803056)。
文摘The interaction of reactants with catalysts has always been an important subject for catalytic reactions.As a promising catalyst with versatile applications,titania has been intensively studied for decades.In this work we have investigated the role of bridge bonded oxygen vacancy(O_(v))in methyl groups and carbon monoxide(CO)adsorption on rutile TiO_(2)(110)(R-TiO_(2)(110))with the temperature programmed desorption technique.The results show a clear different tendency of the desorption of methyl groups adsorbed on bridge bonded oxygen(O_(b)),and CO molecules on the five coordinate Ti^(4+)sites(Ti_(5c))as the Ovconcentration changes,suggesting that the surface defects may have crucial influence on the absorption of species on different sites of R-TiO_(2)(110).
基金supported by the National Key Program of Research and Development (2021YFB3501502, 2021YFB3501504)the National Natural Science Foundation of China (51631002, 92163107)the Beijing Natural Science Foundation (2214067)
文摘A model for describing the adsorption process of hydrogen on surface of tungsten oxide was proposed based on the first-principle calculations. Multiple factors such as type of active surface, adsorption site and distribution of oxygen vacancies were considered to evaluate the hydrogen adsorption capability of tungsten oxide. The adsorption Gibbs free energies, electronic structures and bonding characteristics under various conditions were examined to reveal the influence of oxygen vacancies on the surface. It is found that the capability of hydrogen adsorption of tungsten oxide can be significantly enhanced by adjusting the oxygen vacancy on the outermost layer of certain active surfaces. The modeling predicts that the surface structure stability and gas adsorption ability of tungsten oxide can be simultaneously improved through the formation of W–H bonds. The proposed strategy for moderating surface provides a new approach to obtain excellent gas-sensitive metal oxide materials.
基金supported by the National Natural Science Foundation of China(Grant Nos.51525102,51390475,51371102&21673277)National Basic Research Program of China(Grant No.2015CB654902)
文摘The behavior of oxygen on ceria surfaces is closely related with the applications of ceria as a catalyst and oxygen conductor in solid-oxide fuel cells. Here, the atomic configurations of oxygen adatoms and vacancies on the(110) surface of CeO_2 have been studied combining aberration-corrected transmission electron microscopy and first-principles calculations. The oxygen adatoms were estimated to be located on top of Ce atoms with 50% coverage, forming a c(2×2) reconstruction. The oxygen vacancies can form stable configuration, with the Ce atoms partly reduced.
基金supported by the National Natural Science Foundation of China (Nos. 21671167 and 51602277)Qinglan Project of Jiangsu Province。
文摘Recently, MAX phases show great potential in lithium-ion uptake due to their excellent electrical conductivity and unique lamellar-structure accommodating lithium ions. However, the reports about MAX electrodes for lithium-ion battery up to now are relatively low. Herein we report the preparation of surface oxygen-deficient Ti2SC with abundant oxygen vacancies by a facile surface engineering method. When using as a lithium storage anode, this oxygen-deficient Ti2SC delivers a high capacity of 350 m Ah/g at a current density of 400 m A/g as well as excellent rate performance, doubling the capacity compared to that of Ti2SC without oxygen vacancies. Confirmed by electrochemical impedance spectroscopy(EIS)and kinetic mechanism analyses, after reducing surface oxides and generation of oxygen vacancies, the as-received Ti2SC exhibits higher electrical conductivity and faster lithium ion diffusion. Thus this work offers a facial and effective strategy of optimizing the surface structure of MAX phases, further to achieve an enhanced lithium-ion uptake for lithium-ion batteries or capacitors.
基金the support of this research by the National Natural Science Foundation of China(No.21871078)the Natural Science Foundation of Heilongjiang Province(Nos.JQ2019B001,LH2019B014)the Youth Science and Technology Innovation Team Project of Heilongjiang Province(No.2018-KYYWF-1593)。
文摘Surface oxygen vacancy defects of mesoporous CeO_(2)nanosheets assembled microspheres(D-CeO_(2))are engineered by polymer precipitation,hydrothermal and surface hydrogenation strategies.The resultant D-CeO_(2)with a main pore diameter of 9.3 nm has a large specific surface area(~102.3 m^(2)/g)and high thermal stability.The mesoporous nanosheets assembled microsphere structure prevents the nanosheets from aggregation,which is beneficial to effective mass transfer and shortens the migration distance of charge carriers.After surface hydrogenation,the photoresponse extends to long wavelength region,combing with the band gap from 2.63 eV reduced to 2.39 eV.Under AM 1.5 G radiation,the photocatalytic degradation rate of tetracycline(TC)can be up to 99.99%,which is three times as high as that of pristine CeO_(2)microspheres.The excellent solar-driven photocatalytic performance can be attributed to the efficient surface oxygen vacancy engineering and the mesoporous nanosheets assembled microsphere structure,which narrows the band gap,shortens the migration distance of carriers,promotes the spatial separation of photogenerated electron-hole pairs and favors mass transfer.The strategy provides new insights for fabricating other high-efficient oxide photocatalysts.
基金supported by National Natural Science Foundation of China(Nos.61971252,20703027)Excellent Youth Fund of Shandong Province(No.ZR201709200070)+2 种基金Foundation of Shandong Educational Committee(No.J09LB06)Shandong excellent young scientist research award fund(No.BS2011NJ004)open project of Shanghai Key Laboratory of Rare Earth Functional Materials。
文摘It is known that exposed surface determines material’s performance.WO3 is widely used in gas sensing and its working surface is proposed to control its sensitivity.However,the working surface,or most exposed surface with detailed surface structure remain unclear.In this paper,DFT calculation confirmed that oxygen vacancy O-terminated surface is the most exposed hexagonal WO3(001)surface,judging from competitive adsorption of CO and O2,working surface determination for CO sensing and comparison of oxygen vacancy formation ene rgies on different h-WO3(001)surfaces.It is found that DFT can be a useful alternate for exposed surface determination.Our results provide new perspectives and performance explanations for material research.
