Impact of backwater on water surface profile in curved channels

Owing to extensive construction of dams, the impact of backwater on flow may lead to navigation or flood control issues in curved channels. To date, the impact of backwater on the water surface profile in curved channels remains unknown and requires investigation. In this study, experiments were conducted in a glass-walled recirculating flume with a length of 19.4 m, a width of 0.6 m, and a depth of 0.8 m, and the impact of backwater on the water surface profile in a 90° channel bend was investigated. The experimental results showed that the backwater degree had a significant impact on the transverse and longitudinal flow depth distributions in the bend. The transverse slope of the flow (Jr) increased linearly with an increase in the Froude number of the approach flow upstream of the bend. Jr increased with the longitudinal location parameter ξ when −0.2 < ξ < 0.5, and decreased with ξ when 0.5 < ξ < 1.2. Furthermore, the results showed that Jr asymptotically decreased to zero with an increase in the degree of backwater. An equation was formulated to estimate the transverse slope of the flow in a 90° bend in backwater zones.

A NOVEL APPROACH FOR THE PREDICTION OF SURFACE PROFILE OF OUTGOING WORKPIECE AND THE CALCULATION OF MEAN ROLL RADIUS IN ALLOY BAR ROLLING

In alloy bar rolling process, the component of alloyed steel influenced the spread coefficient greatly, therefore, the component influence coefficient m of different alloyed steel has been determined firstly to calculate the maximum spread. Then the curvature radius of stress free surface and the ＂critical point on the contact boundary＂ have been solved, the surface profile of outgoing workpiece has been obtained. Furthermore, the formula of the equivalent contact section area has been proposed and the mean roll radius has been calculated. The bar rolling experiment and the rigid-plastic FEM （finite element method） simulation have been carried out to verify the novel approach. Compared with experimental data and simulation results, the novel approach can be used in setting processing parameter and design of finishing groove.

The measurement of sea surface profile with X-band coherent marine radar

The line-of-sight velocity of scattering facets is related to the Doppler signals of X-band coherent marine radar from the oceanic surface. First, the sign Doppler Estimator is applied to estimate the Doppler shift of each radar resolution cell. And then, in terms of the Doppler shift, a retrieval algorithm extracting the vertical displacement of the sea surface has been proposed. The effects induced by radar look-direction and radar spatial resolution are both taken into account in this retrieval algorithm. The comparison between the sea surface spectrum of buoy data and the retrieved spectrum reveals that the function of the radar spatial resolution is equivalent to a low pass filter, impacting especially the spectrum of short gravity waves. The experimental data collected by McMaster IPIX radar are also used to validate the performance of the retrieval algorithm. The derived significant wave height and wave period are compared with the in situ measurements, and the agreement indicates the practicality of the retrieval technology.

Surface profile and microstructure of laser peened Ti-6Al-4V

The surface profile of laser peening with square spots was compared with that of circle spots, and the microstructure of laser peened titanium alloy Ti-6Al-4V in the center of a square spot and at the edge of the square spot was investigated in this paper. The results show that a smaller size crystal is produced at the edge of square spots because the shearing strain produces nanoscale crystals in laser peening titanium alloy Ti-6Al-4V.

Investigation of Surface Micro Waviness in Single Point Diamond Fly Cutting

Single point diamond fly cutting is widely used in the manufacture of large-aperture ultra-precision optical elements. However,some micro waviness( amplitude about 30 nm,wavelength about 15 mm) along the cutting direction which will decrease the quality of the optical elements can always be found in the processed surface,and the axial vibration of the spindle caused by the cut-in process is speculated as the immediate cause of this waviness. In this paper,the analytical method of dynamic mesh is applied for simulating the dynamic behavior of the vertical spindle. The consequence is then exerted to the fly cutter and the processed surface profile is simulated. The wavelength of the simulation result coincides well with the experimental result which proves the importance of the cut-in process during the single point diamond fly cutting.

Surface photometry and radial color gradients of nearby luminous early-type galaxies in SDSS Stripe 82

We make use of the images from the Sloan Digital Sky Survey Stripe 82（Stripe 82） to present an analysis of r band surface brightness profiles and radial color gradients（g-r,u-r） in our sample of 111 nearby early-type galaxies（ETGs） .Thanks to the Stripe 82 images,each of which is co-added from about 50 single frames,we are able to pay special attention to the low-surface-brightness areas（LSB areas） of the galaxies.The LSB areas affect the Sérsic fittings and concentration indices by making both of the indices less than the typical values for ETGs.In the Sérsic fits to all the surface brightness profiles,we found some Sérsic indices that range from 1.5 to 2.5,much smaller than those of typical de Vaucouleur profiles and relatively close to those of exponential disks,and some others much larger than four but still with accurate fitting.Two galaxies cannot be fitted with a single Sérsic profile,but once we try double Sérsic profiles,the fittings are improved：one with a profile relatively close to the de Vaucouleur law in the inner area and a profile relatively close to an exponential law in the LSB area,the other with a nice fitting in the inner area but still having a failed fitting in the outer area.About 60%of the sample has negative color gradients（red-core） within 1.5Re,much more than the approximately 10%positive ones（blue-core） within the same radius.However,taking into account the LSB areas,we find that the color gradients are not necessarily monotonic：about one third of the red-core（or blue-core） galaxies have positive（or negative） color gradients in the outer areas. So LSB areas not only make ETGs’Sérsic profiles deviate from de Vaucouleur ones and shift to the disk end,but also reveal that quite a number of ETGs have opposite color gradients in inner and outer areas.These outcomes remind us of the necessity of double-Sérsic fitting.These LSB phenomena may be interpreted by mergers and thus have different metallicity in the outer areas.Isophotal parameters are also discussed briefly in this paper with the following conclusion：there are more disky nearby ETGs that are identified than boxy ones.

Using Impervious Surfaces to Detect Urban Expansion in Beijing of China in 2000s

The change of impervious surface area(ISA) can effectively reveal the gradual process of urbanization and act as a key index for monitoring urban expansion. Experiencing rapid growth of the built environment in the 2000 s, urban expansion of Beijing has not been fully characterized through ISA. In this study, Landsat TM images of Beijing in 2001 and 2009 were obtained, and the eight-year urban expansion process in Beijing was analyzed using the ISA extracted by means of the vegetation-imperious surface-soil(V-I-S) model. From the spatial variation in ISA, the ring structure of urban expansion in Beijing was significant during the study period, with decreasing urban density from the city center to the periphery. In the ring road analysis, the most dramatic changes of ISA were found between the fifth ring and the sixth ring. This area has experienced the most new residential development, and is currently the main source of urban expansion. The typical profile lines revealed the directional characteristics of urban expansion. The east-west profile was the most urbanized axes in Beijing, while ISA change in the east-north profile was more significant than in the other five profiles. Moreover, the transition matrix of ISA levels revealed an increase in urban density in the low density built areas; the Moran′s I index showed a clear expansion of the central urban area, which spread contiguously; and the standard deviational ellipse indicated the northeast was the dominant direction of urban expansion. These findings can provide important spatial control guidelines in the next round of national economic and social development planning, overall urban and rural planning, and land use planning.

EFFECT OF LAP SURFACE PROFILE ON LAPPING EFFICIENCY

To meet the requirements of improving the efficiency in lapping operat ion, the effect of lap surface profile on the efficiency is analyzed theoretical ly and an experimental study is carried out on lapping of Mn Zn ferrite. It is f ound that the profile of lap surface affects significantly the efficiency by mea ns of its capacity to keep loose grains and fixed grains during lapping, and tha t the efficiency can be increased by several times by using a lap with proper surface profile, while the same work surface roughness can be finally obtained.

Development of a validation technique for road surface profile applicable to point cloud data

In recent years,various information and communication technology(ICT)devices measuring three-dimensional(3D)point cloud data have been developed and widely used for the application of pavement surface investigation.However,ICT devices have generally been developed not only for measuring road surface profiles but for various geo-reference point clouds.In this background,the validation of surface profiles acquired with ICT devices fulfils an important role in proving the reliability of measurement result composed by point clouds.This study proposes a wavelet transform agreement(WTA)which involves a normalization factor of profile amplitude for further improvement in the wavelet-based coherence technique.The WTA analysis allows evaluating similarity/dissimilarity of two profiles considering both the location and wavelength simultaneously.For this purpose,a terrestrial laser scanner(TLS),a mobile mapping system(MMS),and an unmanned aerial vehicle(UAV)are employed to prove the advantage of WTA in practical applications.As a result,the advantages of WTA analysis are clearly recognized in the optimization for the measurement interval of TLS,the multi-line measurement of MMS for ride quality improvement of a pavement,and the efficient operation of UAV in terms of the flight altitude.This paper also shows the identification of aging development for surface roughness over time in terms of locations and wavelengths.These findings help not only to guarantee the accuracy of profile measurements but to realize the sophisticated way of using 3D point clouds acquired with ICT devices.The outcomes of this study contribute to the increase of productivity for pavement works with improving the quality of surface profile measurement.

Arc erosion of AgSnO_2 electrical contacts at different stages of a break operation

Arc erosion studies are conducted on AgSnO2 contact materials at different stages in the break operation. A resistive load arrangement is used with up to 42 V DC at 24 A and a constant contact opening velocity. The arc current is terminated at different stages as the arc is drawn between the contacts enabling a study of the arcing phenomena up to that point. Surface profiling of the contacts is conducted to determine the extent of erosion at the different stages as the arc is drawn. Spectral analysis is also conducted on the arc and then related to the extent of erosion. The results show that particular features occur at different stages as the arc is drawn. As the arc is initially established, it goes through an ＂Arc Generation＂ regime where the arc roots are small and immobile on both the anode and the cathode. Material transfer occurs mainly from anode to cathode. The spectral analysis indicates that Sn and O species dominate the arc followed by the Ag species. As the arc is drawn further and enters the ＂Arc Degeneration＂ regime, the anode undergoes significantly larger erosion than the cathode. Also, both contacts indicate that multiple arc roots have formed, which are highly mobile in the later stages of the discharge. The spectral analysis indicates that Ag and N species are in high concentrations compared to other species. The mechanisms of erosion and deposition are discussed in relation to the species within the arc discharge. For the complete break operation, it is found that the anode undergoes major erosion, and it is thought that the gaseous ions species do not dominate the arc under these conditions of short arcs and voltage 〈42 V to cause cathode erosion.

Paleoglacial and paleoclimate reconstructions during the global Last Glacial Maximum in the Longriba area, eastern Tibetan Plateau

Owing to the remoteness of the Longriba area and the lack of dating records,it is extremely challenging to reconstruct the chronology and extent of the paleoglaciers in this area.In this paper,we combined limited observational data with automated modelling for paleoglacial reconstructions.We first identified a broadly distributed paleoglacier from satellite imagery and field investigation based on the sediment-landform assemblage principle and dated it to 23.1±1.4~19.5±1.2 ka by ^(10)Be exposure dating,corresponding to the global Last Glacial Maximum(gLGM).Then,we reconstructed the extent and ice surface of 171 paleoglaciers formed during the similar period based on geomorphological evidence and‘ice surface profile’modelling.The results showed that the paleoglacial coverage was 426.5 km2,with an ice volume of 38.1 km^(3),in the Longriba area.The reconstructed equilibrium line altitudes(ELAs)based on modelled ice surfaces yielded an average of 4245±66 m above sea level(asl),~725±73 m lower than the present ELA(4970±29 m asl).The temperature was~5.51-6.68℃lower,and the precipitation was~30-34%less in Longriba,during the gLGM compared to the present day.This glacial advance was mainly driven by colder climate that was synchronous with Northern Hemisphere cooling events.

A Computer Method of Steady Non-Uniform Gradually Varied Flow in Open Channel & in River

Most of water flow in open channel or in river belongs to steady non-uniform flow. The surface profiles are caused by changes of channel section. It is very important to analyze its computation. According to the regularity of its surface change, the suitable sectional dimensions of open channel or flood control work can be designed. Commonly, computation of non-uniform flow adopts the traditional methods by hand or by graphic method. The speed and precision of computation are restricted. In this paper, a software to calculate water surface profile is introduced. The software is put forward by using C++ .By means of interpolate method and dialogue between user and computer, we can calculate the water surface profile much more quickly and exactly.

Formation mechanism of micro-flows in aqueous poly(ethylene oxide) droplets on a substrate at different temperatures

The drying of aqueous poly（ethylene oxide） （PEO） droplet on a substrate at different temperatures was studied. It was found that the contact line receded when the substrate was at a temperature above 60 ℃. Different nucleation behavior and surface profiles of PEO films were found in different droplets drying processes. The rheological properties of aqueous PEO solutions were studied to understand the mechanism of contact line recession and micro-flow in drying aqueous PEO droplets. It was found that at low temperature, the contact line was static because of great viscous stress; while at high temperature, it receded because of great Marangoni force and the decrease of viscous stress. It was indicated that Marangoni convection was inhibited by the outward capillary flow and viscous stress at low temperature, whereas it became dominant at high temperature. Two types of mechanism for surface profiles and nucleation of PEO film from drying droplets are proposed, providing a theoretical guide for polymer solution application in oil and gas foam flooding technology.

A Method for Calculating Fractal Dimension of Amicrons and Fractal Simulation of Boundary Micro-Topography

A simple and practical method to calculate the fractal dimension （FD） of amicron＇s projective surface profile based on fractal theory is proposed. Taking AI（OH）3 material particles as an example, the scanning electron microscope （SEM） photos of particles were processed using an image.processing software （IPS） Photoshop. Taking the pixel as a fixed yardstick with the enlargement of the size of the particle image, the box-dimension and circumference-area （C-S） methods were used to calculate the FD of the surface profile of the particle. The FD of 1.2623 of the classic Koch curve is obtained, which approximates the true value of 1.2628. The complexities of the object＇s boundary and surface micro-topography are simulated successfully by a generator method.

Laser Texturing of Rolled Surfaces

To reduce friction and improve clarity of steel surfaces, laser texturing was used to produce known surface roughness profile on rolled surfaces using a Nd:YAG laser. Laser texturing process was analyzed to select the laser parameters. The surface roughness hardness and abrasion resistance were then measured and analyzed. The results show that the surface roughness is harder than the matrix, which fits for the requirements of laser texturing. The surface roughness also has good abrasion resistance. The intensity and distribution of the single pulse are the key points affecting the surface roughness profile.

REMOTE SENSING OF AIR TEMPERATURE PROFILE AND SURFACE EMISSIVITY FROM HIRS2 DATA

A physical method,based on the simplification of surface radiation terms in remote sensing equations, has been suggested to retrieve the surface temperature,vertical temperature profile and surface emissivity from the first eight channel observations of TIROS-N/HIRS2.Analyses of several examples indicate that this method can obtain much more accurate temperatures in the lower atmosphere than a statistical technique, and that the surface temperature and emissivity retrieved are also reasonable.

Effect of dipole location on profile properties of symmetric surface plasmon polariton mode in Au/Al2O3/Au waveguide

This study uses a dipole embedded in A1203 layer to excite a symmetric surface plasmon polariton （SPP） mode in Au/A1203/Au waveguide to investigate its profile properties by using finite-difference time-domain （FDTD） method. The excited dipole decay radiatively direct near-field coupling to SPP mode owing to thin A1203 layer of 100 nm. The effects of electric and magnetic field intensity profiles and decay length have been considered and characterized. It is found that dipole location is an important factor to influence the horizontal and vertical profile properties of symmetric SPP mode in Au/A1203/Au waveguide. The amplitudes of electric and magnetic field intensity and the wavelengths of metal-insulatormetal （MIM） SPP resonance mode can be tuned by varying dipole location. The horizontal and vertical decay lengths are 19 and 24 nm, respectively. It is expected that the Au/A1203/Au waveguide structure is very useful for the practical applications of designing a SPP source.

Water surface profile prediction in non-prismatic compound channel using support vector machine(SVM)

The process of estimating the level of water surface in two-stage waterways is a crucial aspect in the design of flood control and diversion structures.Human activities carried out along the course of rivers,such as agricultural and construction operation,have the potential to modify the geometry of floodplains,leading to the formation of compound channels with non-prismatic floodplains,thus possibly exhibiting convergent,divergent,or skewed characteristics.In the current investigation,the Support Vector Machine(SVM)technique is employed to approximate the water surface profile of compound channels featuring narrowing floodplains.Some models are constructed by utilizing significant experimental data obtained from both contemporary and previous investigations.Water surface profiles in these channels can be estimated through the utilization of non-dimensional geometric and flow parameters,including:converging angle,width ratio,relative depth,aspect ratio,relative distance,and bed slope.The results of this study indicate that the SVM-generated water surface profile exhibits a high degree of concordance with both the empirical data and the findings from previous research,as evidenced by its R^(2) value of 0.99,RMSE value of 0.0199,and MAPE value of 1.263.The findings of this study based on statistical analysis demonstrate that the SVM model developed is dependable and suitable for applications in this particular domain,exhibiting superior performance in forecasting water surface profiles.

Experimental and modeling studies on installation of arc sprayed Zn anodes for protection of reinforced concrete structures

Arc sprayed zinc （Zn） anode on concrete surfaces has been an emerging technology for protecting reinforced concrete structures from rebar corrosion in coastal environments. Many cathodic protection （CP） systems with arc sprayed Zn anodes will reach or exceed their design life in the near future and thus may function improperly or insufficiently, making it necessary to replace the aged anodes. However, prior to this study, little was known about the most effective profile for the concrete surface, for either new concrete or old concrete with existing Zn anodes removed. This work develops criteria to properly prepare the concrete surface before the application of new Zn anode. Experimental studies were conducted both in the laboratory and for a field structure in Oregon. Artificial neural network was used to achieve better understanding of the complex cause-and-effect relationships inherent in the Zn-mortar or Zn-concrete systems and was successful in finding meaningful, logical results from the bond strength data. The goal is to achieve strong initial bond strength of new Zn to concrete, which is essential for long-term performance of the CP system. The results from this case study suggest that it is necessary to adjust the anode removal and surface sandblasting based on the electrochemical age of the existing concrete. In all cases of sandblasting, minimize the exposure of large aggregates （e.g., those bigger than 19 mm in diameter）.

Design and Construction of a Low-Force Stylus Probe for On-machlne Tool Cutting Edge Measurement

A new on-machine profiler employing a cantilever beam was proposed and developed to measure the sharp micro-cutting edges of precision cutting tools with low measuring force of 0.1 mN.The proposed profiler consists of a probe unit and a positioning unit.The probe unit employs a stylus mounted on the free end of a hollow triangular cantilever beam and a laser displacement sensor to detect the detlection of the cantilever beam.The positioning unit consists of two single-axis DC servo motor stages for precise positioning of the probe unit.The cantilever is designed with the assistance of the finite element method.In order to demonstrate the feasibility of the proposed measurement system,experiments are conducted and the measurement result for a micro-cutting edge is compared with that by a commercial profiler.Furthermore,a method to com-pensate for the measurement error caused by the lateral displacement of the cantilever beam is proposed.The compensated measurement results show good agreement within±2μm with those obtained by the commercial profler.