Millisecond dynamics of colloidal suspension studied by X-ray photon correlation spectroscopy at the Shanghai Synchrotron Radiation Facility

X-ray photon correlation spectroscopy(XPCS)has emerged as a powerful tool for probing the nanoscale dynamics of soft condensed matter and strongly correlated materials owing to its high spatial resolution and penetration capabilities.This technique requires high brilliance and beam coherence,which are not directly available at modern synchrotron beamlines in China.To facilitate future XPCS experiments,we modified the optical setup of the newly commissioned BL10U1 USAXS beamline at the Shanghai Synchrotron Radiation Facility(SSRF).Subsequently,we performed XPCS measurements on silica suspensions in glycerol,which were opaque owing to their high concentrations.Images were collected using a high frame rate area detector.A comprehensive analysis was performed,yielding correlation functions and several key dynamic parameters.All the results were consistent with the theory of Brownian motion and demonstrated the feasibility of XPCS at SSRF.Finally,by carefully optimizing the setup and analyzing the algorithms,we achieved a time resolution of 2 ms,which enabled the characterization of millisecond dynamics in opaque systems.

Design and Performance Analysis of HMDV Dynamic Inertial Suspension Based on Active Disturbance Rejection Control

This paper addresses the impact of vertical vibration negative effects,unbalanced radial forces generated by the static eccentricity of the hub motor,and road excitation on the suspension performance of Hub Motor Driven Vehicle(HMDV).A dynamic inertial suspension based on Active Disturbance Rejection Control(ADRC)is proposed,combining the vertical dynamic characteristics of dynamic inertial suspension with the features of ADRC,which distinguishes between internal and external disturbances and arranges the transition process.Firstly,a simulation model of the static eccentricity of the hub motor is established to simulate the unbalanced radial electromagnetic force generated under static eccentricity.A quarter-vehicle model of an HMDV with a controllable dynamic inertial suspension is then constructed.Subsequently,the passive suspension model is studied under different grades of road excitation,and the impact mechanism of suspension performance at speeds of 0–20 m/s is analyzed.Next,the three main components within the ADRC controller are designed for the second-order controlled system,and optimization algorithms are used to optimize its internal parameters.Finally,the performance of the traditional passive suspension,the PID-based controllable dynamic inertial suspension,and the ADRC-based controllable dynamic inertial suspension are analyzed under different road inputs.Simulation results show that,under sinusoidal road input,the ADRC-based controllable dynamic inertial suspension exhibits a 52.3%reduction in the low-frequency resonance peak in the vehicle body acceleration gain diagram compared to the traditional passive suspension,with significant performance optimization in the high-frequency range.Under random road input,the ADRC-based controllable dynamic inertial suspension achieves a 29.53%reduction in the root mean square value of vehicle body acceleration and a 14.87%reduction in dynamic tire load.This indicates that the designed controllable dynamic inertial suspension possesses excellent vibration isolation performance.

Advances in Active Suspension Systems for Road Vehicles

Active suspension systems(ASSs)have been proposed and developed for a few decades,and have now once again become a thriving topic in both academia and industry,due to the high demand for driving comfort and safety and the compatibility of ASSs with vehicle electrification and autonomy.Existing review papers on ASSs mainly cover dynamics modeling and robust control;however,the gap between academic research outcomes and industrial application requirements has not yet been bridged,hindering most ASS research knowledge from being transferred to vehicle companies.This paper comprehensively reviews advances in ASSs for road vehicles,with a focus on hardware structures and control strategies.In particular,state-of-the-art ASSs that have been recently adopted in production cars are discussed in detail,including the representative solutions of Mercedes active body control(ABC)and Audi predictive active suspension;novel concepts that could become alternative candidates are also introduced,including series active variable geometry suspension,and the active wheel-alignment system.ASSs with compact structure,small mass increment,low power consumption,high-frequency response,acceptable economic costs,and high reliability are more likely to be adopted by car manufacturers.In terms of control strategies,the development of future ASSs aims not only to stabilize the chassis attitude and attenuate the chassis vibration,but also to enable ASSs to cooperate with other modules(e.g.,steering and braking)and sensors(e.g.,cameras)within a car,and even with high-level decision-making(e.g.,reference driving speed)in the overall transportation system-strategies that will be compatible with the rapidly developing electric and autonomous vehicles.

Cell replacement with stem cell-derived retinal ganglion cells from different protocols

Glaucoma,characterized by a degenerative loss of retinal ganglion cells,is the second leading cause of blindness worldwide.There is currently no cure for vision loss in glaucoma because retinal ganglion cells do not regenerate and are not replaced after injury.Human stem cell-derived retinal ganglion cell transplant is a potential therapeutic strategy for retinal ganglion cell degenerative diseases.In this review,we first discuss a 2D protocol for retinal ganglion cell differentiation from human stem cell culture,including a rapid protocol that can generate retinal ganglion cells in less than two weeks and focus on their transplantation outcomes.Next,we discuss using 3D retinal organoids for retinal ganglion cell transplantation,comparing cell suspensions and clusters.This review provides insight into current knowledge on human stem cell-derived retinal ganglion cell differentiation and transplantation,with an impact on the field of regenerative medicine and especially retinal ganglion cell degenerative diseases such as glaucoma and other optic neuropathies.

Unraveling the Rheology of Nanocellulose Aqueous Suspensions:A Comprehensive Study on Biomass-Derived Nanofibrillated Cellulose

The rheological properties of nanocellulose aqueous suspensions play a critical role in the development of nanocellulose-based bulk materials.High-crystalline,high-aspect ratio,and slender nanofibrillated cellulose(NFC)were extracted from four biomass resources.The cellulose nanofibrils and nanofibril bundles formed inter-connected networks in the NFC aqueous suspensions.The storage moduli of the suspensions with different concentrations were higher than their corresponding loss moduli.As the concentration increased,the storage and loss modulus of NFC dispersion increased.When the shear rate increased to a certain value,there were differences in the changing trend of the rheological behavior of NFC aqueous suspensions derived from different biomass resources and the suspensions with different solid concentrations.NFC dispersion’s storage and loss modulus increased when the temperature rose to nearly 80℃.We hope this study can deepen the understanding of the rheological properties of NFC colloids derived from different biomass resources.

Integrated Active Suspension and Anti-Lock Braking Control for Four-Wheel-Independent-Drive Electric Vehicles

This paper presents an integrated control scheme for enhancing the ride comfort and handling performance of a four-wheel-independent-drive electric vehicle through the coordination of active suspension system(ASS)and anti-lock braking system(ABS).First,a longitudinal-vertical coupled vehicle dynamics model is established by integrating a road input model.Then the coupling mechanisms between longitudinal and vertical vehicle dynamics are analyzed.An ASS-ABS integrated control system is proposed,utilizing an H∞controller for ASS to optimize load transfer effect and a neural network sliding mode control for ABS implementation.Finally,the effectiveness of the proposed control scheme is evaluated through comprehensive tests conducted on a hardware-in-loop(HIL)test platform.The HIL test results demonstrate that the proposed control scheme can significantly improve the braking performance and ride comfort compared to conventional ABS control methods.

Symmetry of upper eyelid after unilateral blepharoptosis repair with minimally invasive conjoint fascial sheath suspension technique

AIM:To investigate the symmetry of upper eyelid in patients with unilateral mild and moderate blepharoptosis who underwent unilateral minimally invasive combined fascia sheath(CFS)suspension.METHODS:A retrospective study of patients who underwent unilateral minimally invasive CFS suspension surgery between January 2018 and December 2021.Inclusion criteria included unilateral mild and moderate ptosis,good levator muscle function(>9 mm)and follow-up of at least 6mo.Pre-and post-operative symmetry was graded subjectively for marginal reflex distance 1(MRD1),tarsal platform show(TPS)and eyebrow fat span(BFS).A t-test was used to evaluate MRD1,TPS and BFS asymmetry by calculating delta values.The Bézier curve tool of the Image J software was used to extract the upper eyelid contours,where the symmetry was measured by the percentage of overlapping curvatures(POC).RESULTS:Totally 105 patients(105 eyelids)were included(mild group,n=84;moderate group,n=21).Postoperatively,all patients increased MRD1 and decreased TPS in the ptotic eye while maintaining unchanged BFS.The asymmetric delta value for MRD1 was measured to be 1.48±0.86 preoperatively,and it decreased to 0.58±0.67 postoperatively in all cases(P=0.0004).In patients with mild ptosis,the asymmetry value of TPS fell significantly from 1.15±0.62 to 0.68±0.38(P=0.0187).The symmetry of the upper eyelid contour increased in all subgroups of patients,with a POC of 59.39%±13.45%preoperatively and POC of 78.29%±13.80%postoperatively.CONCLUSION:Minimally invasive CFS suspension is proved to be an effective means of improving the symmetry of unilateral ptosis in terms of MRD1(all subgroups),POC(all subgroups)and TPS(only mild group),whereas BFS is unaffected.

Stochastic sampled-data multi-objective control of active suspension systems for in-wheel motor driven electric vehicles

This paper addresses the sampled-data multi-objective active suspension control problem for an in-wheel motor driven electric vehicle subject to stochastic sampling periods and asynchronous premise variables.The focus is placed on the scenario that the dynamical state of the half-vehicle active suspension system is transmitted over an in-vehicle controller area network that only permits the transmission of sampled data packets.For this purpose,a stochastic sampling mechanism is developed such that the sampling periods can randomly switch among different values with certain mathematical probabilities.Then,an asynchronous fuzzy sampled-data controller,featuring distinct premise variables from the active suspension system,is constructed to eliminate the stringent requirement that the sampled-data controller has to share the same grades of membership.Furthermore,novel criteria for both stability analysis and controller design are derived in order to guarantee that the resultant closed-loop active suspension system is stochastically stable with simultaneous𝐻2 and𝐻∞performance requirements.Finally,the effectiveness of the proposed stochastic sampled-data multi-objective control method is verified via several numerical cases studies in both time domain and frequency domain under various road disturbance profiles.

Defect Inspection Technology for Steel Truss Suspension Bridges

Steel truss suspension bridges are prone to developing defects after prolonged use.These defects may include corrosion of the main cable or the steel truss.To ensure the normal and safe functioning of the suspension bridge,it is necessary to inspect for defects promptly,understand the cause of the defect,and locate it through the use of inspection technology.By promptly addressing defects,the suspension bridge’s safety can be ensured.The author has analyzed the common defects and causes of steel truss suspension bridges and proposed specific inspection technologies.This research is intended to aid in the timely discovery of steel truss suspension bridge defects.

Reduced power consumption in stirred vessel with high solid loading by equipping punched baffles

Solid-liquid suspension in stirred tank is a common operation in the chemical industry. The power consumption, flow pattern and flow field instability of three systems named as unbaffled stirred tank, traditional baffled stirred tank and punched baffled stirred tank(Pun-BST) were studied by using the computational fluid dynamic analysis. Results showed that perforating holes in the baffles could reduce power consumption of mixing. Meanwhile, the punched baffle system could maintain the solids in suspension as traditional baffle system. The results also showed that the baffles could increase the “effective flow” of stirred tank even though the whole velocity of the vessel is lower than un-baffled vessel. In addition, both the solid-liquid suspension and “effective flow” were related to instability of the flow field.Perfect solid-liquid suspension results always along with obvious instability of the flow field. But, the strengthening effect of punched baffle on flow field instability mainly happened in the near-wall area.It's because the collision and aggregation among sub-streams induced by holes intensified the unstable fluid flow. On the whole, the Pun-BST system provided much better mixing characteristics and recommended to apply in the industrial process.

Properties and Hydration Mechanism of Cementitious Materials Prepared from Calcined Coal Gangue

The preparation of cementitious materials by replacing part of the cement with activated coal gangue is of great significance to the cement industry in terms of carbon reduction and coal-based solid waste utilization.For this paper,cementitious material was prepared by firing activated coal gangue under suspension conditions and batching it with limestone powder using Inner Mongolia coal gangue as raw material.The optimal ratio was determined by testing the strength changes of the cementitious material at 3,7,and 28 days of hydration,and the hydration process and mechanism were explored by combining the pore structure,heat of hydration,chemical composition,phase composition,and microscopic morphological characteristics of the hydration products.The results showed that the active materials formulated from activated gangue and limestone powder can be used to prepare cementitious materials with good performance at the level of 30%–50%replacement of cement.The optimal ratio was 30%replacement of cement,and the mass ratio of calcined gangue to limestone powder was 2:1.The 3 days compressive strength of this ratio was 28.8 MPa,which was only slightly lower than that of cement.However,the 28 days compressive strength of samples reached 67.5 MPa,which was much higher than that of the reference cement.In the hydration of this cementitious material,not only does the activated coal gangue react with the Ca(OH)_(2)formed by hydration to form C–S–H gel,but CaCO3 also participates in the reaction to form a new phase of carbon aluminate,and the two effects together promote the development of the later strength of the samples.This paper can provide a reference for carbon reduction in the cement production process and comprehensive utilization of coal gangue.

A cyclic effect of cAMP and calcium signaling contributes to jujube growth and development

3´,5´-Cyclic adenosine monophosphate(cAMP)is an important metabolite that is specifically enriched in jujube.However,the effect of cAMP on jujube cellular responses has not been comprehensively studied.Here,we established jujube cell suspension cultures and investigated the calcium influx in response to cAMP treatment through protoplast isolation and fluorescence intensity.Firstly,cAMP treatment could promote jujube growth and increase the content of endogenous cAMP.Using transcriptome analysis with transgenic Arabidopsis plants overexpressing adenylate cyclase(ZjAC)as a positive control,we identified 60 calcium-related differential expressed genes(DEGs)that contributed to the calcium signaling and inter-or intra-cellular responses.Pharmacological treatments such as cAMP and the calcium ionophore A23187 could induce ZjAC expression,the accumulation of cAMP and calcium influx in jujube cells,while ethylene glycol tetraacetic acid(EGTA)or bithionol treatment inhibited these changes.Moreover,the calcium channels and transporters in calcium influx,such as the ZjCNGC2 channel and the mitogen activated protein(MAP)kinase pathway,could be activated by cAMP treatment.In summary,our findings demonstrated that cAMP biosynthesis is dependent on calcium influx and the amplifying effect between calcium and cAMP may be involved in intracellular signal induction,which might contribute to the growth and development of jujube.

NuBot:A Magnetic Adhesion Robot with Passive Suspension to Inspect the Steel Lining

The steel lining of huge facilities is a significant structure,which experiences extreme environments and needs to be inspected periodically after manufacture.However,due to the complexity(crisscross welds,curved surface,etc.)of their inside environments,high demands for stable adhesion and curvature adaptability are put forward.This paper presents a novel wheeled magnetic adhesion robot with passive suspension applied in nuclear power containment called NuBot,and mainly focuses on the following aspects:(1)proposing the wheeled locomotion suspension to adapt the robot to the uneven surface;(2)implementing the parameter optimization of NuBot.A comprehensive optimization model is established,and global optimal dimensions are properly chosen from performance atlases;(3)determining the normalization factor and actual dimensional parameters by constraints of the steel lining environment;(4)structure design of the overall robot and the magnetic wheels are completed.Experiments show that the robot can achieve precise locomotion on both strong and weak magnetic walls with various inclination angles,and can stably cross the 5 mm weld seam.Besides,its maximum payload capacity reaches 3.6 kg.Results show that the NuBot designed by the proposed systematic method has good comprehensive capabilities of surface-adaptability,adhesion stability,and payload.Besides,the robot can be applied in more ferromagnetic environments and the design method offers guidance for similar wheeled robots with passive suspension.

Vertical Diffusion Coefficient with Stratification Effect for Silty Sediment Suspension Under Waves

To analyze previous experimental data of suspended sediment concentration for silty sediment with different sediment particle sizes due to waves, a new stratification correction coefficient is presented. The suspended sediment concentration gradient and sediment particle diameter are selected as parameters. Furthermore, a diffusion coefficient model with a stratification effect over the whole water depth for silty sediment suspension under waves is developed. The comparison between the suspended sediment concentration calculated by the presented model and several groups of experimental data shows that the model can reasonably reflect the vertical distribution of silty sediment suspension.The stratification effect calculated by the present model decreases with an increase in the sediment particle diameter,which indicates that the model can be extended to describe the suspended sediment concentration of fine to medium sand when the near-bottom sediment concentration is not very high. Although the original model needs to be iteratively solved, the approximate method without iteration is recommended for applications when the near bottom sediment concentration is between 10 and 20 kg/m~3 due to the small difference between the non-iterative and iterative solution for near bed layer suspended sediment concentration, which plays a major role in sediment transport.

Reaction behavior and non-isothermal kinetics of suspension magnetization roasting of limonite and siderite

In order to develop limonite and decrease CO_(2) emissions,siderite is proposed as a clean reductant for suspension magnetization roasting(SMR) of limonite.An iron concentrate(iron grade:65.92wt%,iron recovery:98.54wt%) was obtained by magnetic separation under the optimum SMR conditions:siderite dosage 40wt%,roasting temperature 700℃,roasting time 10 min.According to the magnetic analysis,SMR achieved the conversion of weak magnetic minerals to strong magnetic minerals,thus enabling the recovery of iron via magnetic separation.Based on the phase transformation analysis,during the SMR process,limonite was first dehydrated and converted to hematite,and then siderite decomposed to generate magnetite and CO,where CO reduced the freshly formed hematite to magnetite.The microstructure evolution analysis indicated that the magnetite particles were loose and porous with a destroyed structure,making them easier to be ground.The non-isothermal kinetic results show that the main reaction between limonite and siderite conformed to the two-dimension diffusion mechanism,suggesting that the diffusion of CO controlled the reaction.These results encourage the application of siderite as a reductant in SMR.

Preparation and Performance of n-Dodecane Microencapsulated Phase Change Cold Storage Materials

Cold chain transportation is currently a hot research topic.Since the traditional refrigeration methods lead to the consumption of large amounts of energy,the search for new energy storage materials is a major trend.In the present contribution,n-dodecane/PMMA microencapsulated phase change materials were prepared by suspension polymerization for ice-temperature cold chain transportation and their preparation parameters were explored using the encapsulation ratio as optimization indicator.The results show that the n-dodecane-containing microcapsules have a maximum encapsulation ratio of 93.2%when using a core-to-wall ratio of 3:1,5%of emulsifier,30%of crosslinker,and 2000 rpm of emulsification speed.The phase transition temperature and enthalpy are-2℃and 195.9 kJ/kg,respectively.The microcapsules prepared with the optimized process parameters have good microscopic morphology,high energy storage efficiency,uniform particle size and good thermal stability,making them ideal materials for cold chain transportation.

Health Phys.Abstracts,Volume 124,Number 3

Application of Resuspension Data of Respirable Particles for Early Phase Inhalation Following Deposition Contamination in Radiological Emergencies Florentin Lange1,Wolfgang Koch2(1.MataréStr.3,40667 Meerbusch,Germany;2.Department of Aerosol Technology,Fraunhofer ITEM,Nikolai-Fuchs-Str.1,30625 Hannover,Germany)Abstract:In model experiments,wind resuspension rates,Rr,of respirable particles(<10μm,aerodynamic diameter)and their time dependence after deposition on representatively contaminated urban surfaces were measured under real-life conditions,taking into account different weather conditions(wind velocities,precipitation)as well as countermeasures(fixation).

Effect of Polyisobutylene Succinimide on the Physical Stability of an Environmentally Friendly Pesticide Oil Dispersion Suspension

Oil dispersible suspension concentrates are safe,green,and environmentally friendly formulations.Problems such as layering,pasting,and bottoming are frequently encountered during the production,storage,and transportation process.Polyisobutylene succinimide functions as a dispersant and exhibits great potential to improve the physical stability of the oil dispersible suspension concentrate.From a microscopic perspective,the sorption characteristics of the polyisobutylene succinimide dispersant T151 on penoxsulam particle surfaces were comprehensively evaluated with XPS,FTIR,and SEM.The T151 adsorption procedure complied with a pseudo-second-order kinetic adsorption model,and it was a kind of physical sorption with an Ea of 22.57 kJ⋅mol^(−1).The T151 sorption model was consistent with the Langmuir isotherm.The adsorption process was spontaneous and followed by an entropy increase.TheΔH^(θ)of dispersant T151 on the surface of penoxsulam particles was 31.59 kJ⋅mol^(−1).The adsorption procedure was endothermic,and the primary force was hydrogen bonding.The XPS results showed that the F and S electronic peaks at the penoxsulam interface decreased,and that the C electronic peak increased significantly after the adsorption of dispersant T151,indicating the adsorption on the surface of penoxsulam particles.The results of this study provide a vital theoretical basis for the application of polyisobutylene succinimide dispersants in oil dispersible suspension systems.

A Review of Electromagnetic Energy Regenerative Suspension System&Key Technologies

The active suspension has undoubtedly improved the performance of the vehicle,however,the trend of“lowcarbonization,intelligence,and informationization”in the automotive industry has put forward higher and more urgent requirements for the suspension system.The automotive industry and researchers favor active energy regeneration suspension technology with safety,comfort,and high energy regenerative efficiency.In this paper,we review the research progress of the structure form,optimization method,and control strategy of electromagnetic energy regenerative suspension.Specifically,comparing the pros and cons of the existing technology in solving the contradiction between dynamic performance and energy regeneration.In addition,the development trend of electromagnetic energy regenerative suspension in the field of structure form,optimization method,and control technology prospects.

The application of internal suspension technique in retroperitoneal robot-assisted laparoscopic partial nephrectomy with a new robotic system KangDuo Surgical Robot-01:Initial experience

Objective To assess the feasibility of internal suspension technique in retroperitoneal robot-assisted laparoscopic partial nephrectomy(rRAPN)with a new robotic platform called KangDuo Surgical Robot-01(KD-SR-01)system(Suzhou KangDuo Robot Co.,Ltd.,Suzhou,China)and discuss its surgical technique.Methods A 44-year-old male patient was admitted with a 2.5 cm tumor on dorsolateral upper pole of the left kidney.The R.E.N.A.L.nephrometry score of this patient was 4x.This patient underwent rRAPN with KD-SR-01.The perinephric fat between the tumor and Gerota's fascia was preserved,which was used for internal suspension traction during tumor resection.Postoperative follow-up data were collected.Results The surgery was successfully carried out with a duration of 127 min,in which the docking time was 6 min 25 s and console time was 60 min.The warm ischemia time was 19 min 53 s,and the estimated blood loss was 0 mL.The pathological histology showed a pathological tumor stage 1a clear cell renal cell carcinoma,with a negative surgical margin.The World Health Organization/International Society of Urological Pathology(WHO/ISUP)grade of this patient was Grade 2.No recurrence was observed during the 6-month follow-up.Conclusion Internal suspension in rRAPN is feasible and effective with use of the new robotic system KD-SR-01.