The preparation and the in-vitro pharmacodynamics study of the intracapsular sustained-release preparations for the prevention of posterior capsule opacification

Docetaxel-loaded sustained-release preparation based on 2-Hydroxyethyl methacrylate(HEMA)and Methyl methacrylate(MMA)cross-linked copolymer(P(HEMA-co-MMA))was prepared to examine the potential use for preventing posterior capsule opacification(PCO).The preparations were prepared by polymerizing the mixture of HEMA,MMA,cross-linking agent(EGDMA),initiator(AIBN)and docetaxel.The influence factors and mechanism of drug release were studied in the experiments.FT-IR,X-RD and SEM methods were used to characterize the polymer(P(HEMA-co-MMA))and docetaxel-loaded sustained-release preparations.Biocompatibility of P(HEMA-co-MMA)and in-vitro effect of docetaxel-loaded sustained-release preparations were also evaluated.The results showed that docetaxel could release sustainedly from these preparations prepared by cross-linking polymerization.And the release rate could be accelerated by increasing the MMA ratio or EGDMA ratio of the polymer.Release mechanism of docetaxel fitted the Higuchi model well.The results of IR and X-RD showed that only a hydrogen bond was formed between docetaxel and P(HEMA-co-MMA).Docetaxel dispersed in P(HEMA-co-MMA)in amorphous form.The elution test showed that P(HEMA-co-MMA)had good biocompatibility and the in-vitro pharmacodynamics study proved that docetaxel could release stably from the preparations and inhibit HLECs’proliferation.The docetaxel-loaded sustained-release preparations proved to be a promising therapy for preventing PCO.These results also lay a theoretical and experimental foundation for the future.

Common Artifacts and Remedies in Histological Preparations

The importance of the accuracy of preparing biological specimen as histological sections that can be examined under a microscope lies in reflecting a true image of the tissue that includes all its components, which are used in scientific research or for the purpose of diagnosing various diseases of the body. Despite this, some cellular structures within the tissue may suffer from some alterations that result from the appearance of defects during any stage of preparing these microscopic sections, which alter or interfere with the precise cellular structures and morphology that constitute the tissue and thus give a different image for tissue features and cause confusion in the work histopathologist in the diagnosis. There are several reasons that can cause a misdiagnosis of the sample that occurs during the surgical separation process or after separation during the stages of microscopic preparation techniques from fixation stage, tissue processing, embedding or microtomy, staining until mounting procedures. The constant need to identify these defects and their causes in addition to try to reduce them is one of the biggest challenges evident in pathology laboratories. Therefore, this study aims to review the most common defects that occur in any stage of tissue processing, with an explanation of their causes and appropriate ways to avoid them.

Clinical Value of Endodontic Patients Treated with Calcium Hydroxide Preparations

Objective: To investigate the clinical value of endodontics patients treated with calcium hydroxide preparation. Methods: The study cases were selected from the endodontics patients who visited our hospital during the period from January 2022 to December 2023, and 97 cases were randomly selected according to the numerical table method and divided into two groups. There were 49 cases in the control group and 48 cases in the experimental group. The control group received conventional therapy, while the experimental group received treatment with calcium hydroxide preparation, and the clinical value of the two different treatment modalities was observed and analyzed. Results: In the experimental group, 45 out of 48 patients (93.75%) showed effectiveness, compared to 39 out of 49 patients (79.59%) in the control group. The effectiveness rate was significantly higher in the experimental group (P < 0.05). Initially, the VAS scores between the two groups were similar (P > 0.05), but after 1 and 3 months of treatment, the scores decreased in both groups. However, the experimental group had a greater decrease, indicating lower pain levels (P < 0.05). The experimental group had fewer complications (8.33%) compared to the control group (24.49%), with a significant difference (P < 0.05). Satisfaction with treatment was higher in the experimental group (95.83%) compared to the control group (95.83%), resulting in an overall higher satisfaction rate in the experimental group (83.67%;P < 0.05). Conclusion: The treatment effect of endodontics with calcium hydroxide preparation is remarkable, which not only can effectively help patients to relieve their pain and reduce the incidence of complications but also plays an important role in improving patients’ satisfaction with treatment, which is worthwhile to be vigorously promoted in the clinic and learn from it.

Preparation of Sustained-release Silybin Microspheres by Spherical Crystallization Technique

Aim To improve the dissolution rate and bioavailability of silybin. Methods Sustained-release silybin microspheres were prepared by the spherical crystallization technique with soliddispersing and release-retarding polymers. A differential scanning calorimeter and an X-ray diffractometer were used to investigate the dispersion state of silybin in the microspheres. The shape, surface morphology, and internal structure of the microspheres were observed using a scanning electron microscope. Characterization of the microspheres, such as average diameter, size distribution and bulk density of the microspheres was investigated. Results The particle size of the microspheres was determined mainly by the agitation speed. The dissolution rate of silybin from microspheres was enhanced by increasing the amount of the dispersing agents, and sustained by the retarding agents. The release rate of microspheres was controlled by adjusting the combination ratio of the dispersing agents to the retarding agents. The resuits of X-ray diffraction and differential scanning calorimetry analysis indicated that silybin was highly dispersed in the microspheres in amorphous state. The release profiles and content did not change after a three-month accelerated stability test at 40 ℃ and 75% relative humidity. Conclusion Sustained-release silybin microspheres with a solid dispersion structure were prepared successfully in one step by a spherical crystallization technique combined with solid dispersion technique. The preparation process is simple, reproducible and inexpensive. The method is efficient for designing sustained-release microspheres with water-insoluble drugs.

Nerve growth factor-basic fibroblast growth factor poly-lactide co-glycolid sustained-release microspheres and the small gap sleeve bridging technique to repair peripheral nerve injury

We previously prepared nerve growth factor poly-lactide co-glycolid sustained-release microspheres to treat rat sciatic nerve injury using the small gap sleeve technique.Multiple growth factors play a synergistic role in promoting the repair of peripheral nerve injury;as a result,in this study,we added basic fibroblast growth factors to the microspheres to further promote nerve regeneration.First,in an in vitro biomimetic microenvironment,we developed and used a drug screening biomimetic microfluidic chip to screen the optimal combination of nerve growth factor/basic fibroblast growth factor to promote the regeneration of Schwann cells.We found that 22.56 ng/mL nerve growth factor combined with 4.29 ng/mL basic fibroblast growth factor exhibited optimal effects on the proliferation of primary rat Schwann cells.The successfully prepared nerve growth factor-basic fibroblast growth factor-poly-lactide-co-glycolid sustained-release microspheres were used to treat rat sciatic nerve transection injury using the small gap sleeve bridge technique.Compared with epithelium sutures and small gap sleeve bridging alone,the small gap sleeve bridging technique combined with drug-free sustained-release microspheres has a stronger effect on rat sciatic nerve transfection injury repair at the structural and functional level.

Emerging space for non-polyethene-glycol bowel preparations in inflammatory bowel disease-related colonoscopy:Veering toward better adherence and palatability

Patients with inflammatory bowel diseases(IBDs)require repeated endoscopic evaluations over time by colonoscopy to weigh disease activity but also for different and additional indications(e.g.,evaluation of postoperative recurrence,colorectal cancer surveillance).Colonoscopy,however,requires adequate bowel preparation to be of quality.The latter is achieved as long as the patient takes a certain amount of product to have a number of bowel movements suitable to clean the colon and allow optimal visualization of the mucosa during endoscopy.However,significant guidelines recommend preparations for patients with IBD not excelling in palatability.This recommendation originates from the fact that most of the studies conducted on bowel preparations in patients with IBD have been done with isosmolar preparations based on polyethylene glycol(PEG),for which,therefore,more safety data exist.As a result,the low-volume non-PEG preparations(e.g.,magnesium citrate plus picosulphate,oral sulphate solutions)have been set aside for the whole range of warnings to be heeded because of their hyperosmolarity.New studies,however,are emerging,leaning in overall for a paradigm shift in this matter.Indeed,such non-PEG preparations seem to show a particularly encouraging and engaging safety profile when considering their broad potential for tolerability and patient preference.Indeed,such evidence is insufficient to indicate such preparations in all patients with IBD but may pave the way for those with remission or well-controlled disease.This article summarizes the central studies conducted in IBD settings using non-PEG preparations by discussing their results.

Preparation and evaluation of tamsulosin hydrochloride sustained-release pellets modified by two-layered membrane techniques

The aim of the present study was to develop tamsulosin hydrochloride sustained-release pellets using two-layered membrane techniques.Centrifugal granulator and fluidizedbed coater were employed to prepare drug-loaded pellets and to employ two-layered membrane coating respectively.The prepared pellets were evaluated for physicochemical characterization,subjected to differential scanning calorimetry(DSC)and in vitro release of different pH.Different release models and scanning electron microscopy(SEM)were utilized to analyze the release mechanism of Harnual■ and home-made pellets.By comparing the dissolution profiles,the ratio and coating weight gain of Eudragit■ NE30D and Eudragit■ L30D55 which constitute the inside membrane were identified as 18:1 and 10%-11%.The coating amount of outside membrane containing Eudragit■ L30D55 was determined to be 0.8%.The similarity factors(f_(2))of home-made capsule and commercially available product(Harnual■)were above 50 in different dissolution media.DSC studies confirmed that drug and excipients had good compatibility and SEM photographs showed the similarities and differences of coating surface between Harnual■ and self-made pellets before and after dissolution.According to Ritger-Peppas model,the two dosage form had different release mechanism.

Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review

Laser powder bed fusion(L-PBF) has attracted significant attention in both the industry and academic fields since its inception, providing unprecedented advantages to fabricate complex-shaped metallic components. The printing quality and performance of L-PBF alloys are infuenced by numerous variables consisting of feedstock powders, manufacturing process,and post-treatment. As the starting materials, metallic powders play a critical role in infuencing the fabrication cost, printing consistency, and properties. Given their deterministic roles, the present review aims to retrospect the recent progress on metallic powders for L-PBF including characterization, preparation, and reuse. The powder characterization mainly serves for printing consistency while powder preparation and reuse are introduced to reduce the fabrication costs.Various powder characterization and preparation methods are presented in the beginning by analyzing the measurement principles, advantages, and limitations. Subsequently, the effect of powder reuse on the powder characteristics and mechanical performance of L-PBF parts is analyzed, focusing on steels, nickel-based superalloys, titanium and titanium alloys, and aluminum alloys. The evolution trends of powders and L-PBF parts vary depending on specific alloy systems, which makes the proposal of a unified reuse protocol infeasible. Finally,perspectives are presented to cater to the increased applications of L-PBF technologies for future investigations. The present state-of-the-art work can pave the way for the broad industrial applications of L-PBF by enhancing printing consistency and reducing the total costs from the perspective of powders.

Combustion Characteristics of Solid Sustained-Release Energetic Materials

A solid sustained-release energetic material sample,an eruption device and a complete test system were prepared further to analyse the combustion characteristics of solid sustainedrelease energetic materials.The high-temperature heat flux generated by the combustion of the samples from the eruption device was used to penetrate the Q235 target plate.In addition,the meaning and calculation formula of energy density characterising the all-around performance of heat flux were proposed.The numerical simulation of the combustion effect of samples was carried out.According to the data comparison,the numerical simulation results agreed with the experimental results,and the maximum deviation between the two was less than 8.9%.In addition,the structure of the combustion wave and high-temperature jet was proposed and analysed.Based on theoretical analysis,experimental research and numerical simulation,the theoretical burning rate formula of the sample was established.The maximum error between the theoretically calculated mass burning rate and the experimental results was less than 9.8%.Therefore,using the gas-phase steady-state combustion model to study the combustion characteristics of solid sustained-release energetic materials was reasonable.The theoretical burning rate formula also had high accuracy.Therefore,the model could provide scientific and academic guidance for the theoretical research,system design and practical application of solid sustained-release energetic materials in related fields.

Preparation and <i>in Vitro</i>Drug Release Evaluation of Once-Daily Metformin Hydrochloride Sustained-Release Tablets

The objective of this study was to develop once-daily metformin hydrochloride sustained-release tablets (MHSRT) and evaluate their in vitro release behavior. MHSRT were prepared by the film coating method. The in vitro drug release rate of MHSRT and the commercial tablets Fortamet? made in the United States of America in water was fitted with zero order kinetic equation, and Ritger-Peppas kinetic equation in 0.1 M HCl and pH 6.8-phosphate buffer, respectively. The similarity factor f2 values of MHSRT in three different dissolution medium were 82, 80 and 74, respectively in comparison with imported Fortamet?, which were all greater than 50. The results of storage-stability showed that MHSRT were stable for at least 6 months under stress condition (40℃ ± 2℃, RH 75% ± 5%). Therefore, in this study, MHSRT were successfully prepared using optimized formulation technologies that meet mass produce. The in vitro release behavior of MHSRT was almost similar to that of imported Fortamet?.

Application and Practice of Traditional Chinese Medicine Characteristic Technology Inheritance in Research and Development of Traditional Chinese Medicine Preparations in Medical Institutions

Medical institution preparations play an important role in the development of hospitals,being one of the main forms of traditional Chinese medicine clinical characteristic medication,as well as an important carrier for the inheritance and innovation of traditional Chinese medicine.In recent years,the research and development of traditional Chinese medicine preparations has become a hot spot in the research and development of preparations by medical institutions.Traditional Chinese medicine preparations prepared by traditional processes and their entrusted preparation matters have changed from the current licensing management to filing management.The registration model of traditional Chinese medicine preparations has undergone significant changes,emphasizing more on real data and evaluation results from the objective world,respecting traditional medication experience,and emphasizing the inheritance and innovative development of traditional technological experience.In the process of following teachers in the inheritance project of traditional Chinese medicine,we combined the inheritance of traditional Chinese medicine characteristic technology with the research and development practice of traditional Chinese medicine preparations in medical institutions,and focused on the analysis and discussion of technical problems such as prescription screening,dosage form selection,process route design and clinical observation of traditional Chinese medicine preparations,hoping to provide reference for scholars in the same field of traditional Chinese medicine.

On-spot preparation of EDTA solution for the treatment of band keratopathy:a case report

Dear Editor,We report a case of band keratopathy who experienced several ocular surgeries,secondary uveitis and glaucoma which eventually led to severe band keratopathy.We use commonly-used vacuum blood collection tubes with ethylenediaminetetraacetic acid dipotassium salt(EDTA-K2)to prepare chelation solution on-spot to remove the calcium deposits on the corneal surface.It is proved to be relatively safety,efficacy,cost-effective.

Key factors to prioritize when preparing for the Olympic Games

We need more research that will fulfill the needs of athletes and coaches.This is a common statement,highly relevant nowadays only a few weeks before the commencement of the Paris 2024 Olympic Games.To fill this gap,we have identified 6 topics that we feel coaches and athletes would be interested in learning more to optimize their preparation for the Olympics.These topics are.

Preparation and Thermal Stability of AlMoON Based Solar Selective Absorption Coating

AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron sputtering.The coatings included infrared reflection layer Mo,absorption layer AlMoN,absorption layer AlMoON and antireflection layer AlMoO from bottom to top.The surface of the deposited coatings is flat without obvious defects.The absorptivity and emissivity are 0.896 and 0.09,respectively,and the quality factor is 9.96.After heat treatment at 500℃-36 h,the surface roughness of the coating increases,a small number of cracks and other defects appear,and the broken part is still attached to the coating surface.A certain degree of element diffusion occurs in the coatings,resulting in the decline of the optical properties of the coatings.The absorptivity and emissivity are 0.883 and 0.131,respectively,the quality factor is 7.06,and the PC value is 0.0335.The coatings do not fail under this condition and have certain thermal stability.

Research Progress of Bowel Preparation for Colonoscopy

Colorectal cancer ranks third in the global cancer data in 2020. Colorectal scope is the most effective method to diagnose colorectal diseases such as benign and malignant colorectal tumors. The poor quality of intestinal preparation causes an increased rate of missed diagnosis of colorectal tumors, reduces the rate of cecal intubation for colorectal examination, increases the discomfort, and reduces the compliance of re-examination. Therefore, we should try our best to improve the quality of intestinal preparation. This study reviewed the latest advances related to the preoperative preparation for colonoscopy. Recent research shows that smartphone apps can provide more detailed education and guidance on bowel preparation;Pre-packaged foods are more suitable as a way to eat before colonoscopy. The use of smaller doses, better taste of cathartic agents, and some auxiliary measures, combined with the patient’s situation to provide personalized intestinal preparation measures to improve the quality of intestinal preparation. Starting from the quality of colonoscopy bowel preparation, continuous improvement of patients’ tolerance to bowel preparation, continuous improvement of bowel preparation plan based on individual factors’ needs, and better communication with examined subjects by using existing scientific information technology, may be the hot spot of colonoscopy bowel preparation research in the next few years.

Progress in preparation of AlN-reinforced magnesium matrix composites:A review

As a ceramic material,AlN has very good thermophysical and mechanical properties.In addition,AlN is an effective refining agent for Mg alloys because it has a lattice constant similar to that of Mg.Therefore,AlN is an ideal reinforcement for magnesium matrix composites(MMCs),and is attracting increasing attention.This review addresses the development of preparation technologies for AlN-reinforced Mg matrix composites.The mainstream preparation techniques include stir casting,melt infiltration,powder metallurgy,and in-situ methods.In addition,the advantages and disadvantages of these techniques are analyzed in depth,and it is pointed out that the next direction for the preparation of high-performance AlN-reinforced MMCs is less aluminization and multiple technologies integration.

Preparation of single atom catalysts for high sensitive gas sensing

Single atom catalysts(SACs)have garnered significant attention in the field of catalysis over the past decade due to their exceptional atom utilization efficiency and distinct physical and chemical properties.For the semiconductor-based electrical gas sensor,the core is the catalysis process of target gas molecules on the sensitive materials.In this context,the SACs offer great potential for highly sensitive and selective gas sensing,however,only some of the bubbles come to the surface.To facilitate practical applications,we present a comprehensive review of the preparation strategies for SACs,with a focus on overcoming the challenges of aggregation and low loading.Extensive research efforts have been devoted to investigating the gas sensing mechanism,exploring sensitive materials,optimizing device structures,and refining signal post-processing techniques.Finally,the challenges and future perspectives on the SACs based gas sensing are presented.

The preparation and properties of N-doped carbon materials and their use for sodium storage

Defect engineering by heteroatom doping gives carbon materials some new characteristics such as a different electronic structure and a high electrochemical activity,making them suitable for high-performance applications.N-doping has been widely investigated because of its similar atom radius to carbon,high electronegativity as well as many different configurations.We summarize the preparation methods and properties of N-doped carbon materials,and discuss their possible use in sodium ion storage.The relationships between N content/configuration and crystallinity,electronic conductivity,wettability,chemical reactivity as well as sodium ion storage performance are discussed.

Preparation and evaluation of sustained-release azithromycin tablets in vitro and in vivo

The objective of this study was to prepare azithromycin(AZI)sustained-release products in order to allow for a high dose to be administered,reduce gastrointestinal side-effects and increase the compliance of patients.AZI sustained-release tablets with different release performance(F-I:T_(100%)=3 h and F-II:T_(100%)=8 h in pH 6.0 phosphate buffer)were successfully prepared by wet granulation.The in vitro release rate and drug release mechanism were studied.The release rate of F-Iwas affected by dissolutionmedia with different pH,but not for F-II.HixsoneCrowellmodel was the best regression fitting model for F-I and F-II.Additionally,F-I and F-II both belonged to non-Fick diffusion.Oral pharmacokinetics of the two tablets and one AZI dispersible tablet as reference were studied in six healthy beagle dogs after oral administration.Compared with the reference,the C_(max) of F-I and F-II were decreased,and the T_(max) were prolonged,in that case which meet the requirement of sustained-release tablets.The relative bioavailability of F-I and F-II were 79.12%and 64.09%.T-test ofAUC_(0-144),and AUC_(0-∞) for F-I and F-II indicated there was no significant difference between F-I and F-II.These mean that the extended release rate did not induce different pharmacokinetics in vivo.

Insight into demand-driven preparation of single-atomic mediators for lithium–sulfur batteries

Lithium-sulfur(Li-S) batteries have attracted considerable attention as one of the most appealing energy storage systems.Strenuous efforts have been devoted to tackling the tremendous challenges,mainly pertaining to the severe shuttle effect,sluggish redox kinetics and lithium dendritic growth.Single-atomic mediators as promising candidates exhibit impressive performance in addressing these intractable issues.Related research often utilizes a trial-and-error approach,proposing solutions to fabricate single-atomic materials with diversified features.However,comprehensive review articles especially targeting demand-driven preparation are still in a nascent stage.Inspired by these considerations,this review summarizes the design of single-atomic mediators based on the application case-studies in LiS batteries and other metal-sulfur systems.Emerging preparation routes represented by chemical vapor deposition technology are introduced in a demand-oriented classification.Finally,future research directions are proposed to foster the advancement of single-atomic mediators in Li-S realm.