Trimming self-intersections in swept volume solid modeling

Swept volume solid modeling has been applied to many areas such as NC machining simulation and verification, robot workspace analysis, collision detection, and CAD. But self-intersections continue to be a challenging problem in the boundary representation of swept volume solids. A novel algorithm is presented in this paper to trim self-intersection regions in swept volume solids modeling. This trimming algorithm consists of two major steps: (1) roughly detecting self-intersection regions by checking intersections or overlapping of the envelop profiles; (2) splitting the whole envelop surfaces of the swept volume solid into separate non-self-intersecting patches to trim global self-intersections, and to trim local self-intersections, dividing local self-intersecting regions into patches and replacing self-intersecting patches with non-self-intersecting ones. Examples show that our algorithm is efficient and robust.

Mechanism of expanding swept volume by nano-sized oil-displacement agent

The effect of expanding swept volume by iNanoW1.0 nanoparticles in ultra-low permeability core was studied by low-field nuclear magnetic resonance(LF-NMR)technology,and the mechanism of expanding swept volume was explained by oxygen spectrum nuclear magnetic resonance(17O-NMR)experiments and capillarity analysis.The results of the LF-NMR experiment show that the nano-sized oil-displacement agent iNanoW1.0 could increase the swept volume by 10%-20%on the basis of conventional water flooding,making water molecules get into the low permeable region with small pores that conventional water flooding could not reach.17O-NMR technique and capillary analysis proved that iNanoW1.0 nanoparticles could weaken the association of hydrogen bonds between water molecules,effectively change the structure of water molecular clusters,and thus increasing the swept volume in the low permeable region.The ability of weakening association of hydrogen bonds between water molecules of iNanoW1.0 nanoparticles increases with its mass fraction and tends to be stable after the mass fraction of 0.1%.

The Differential Equation Algorithm for General Deformed Swept Volumes

The differential equation approach for characterizing swept volume boundaries is extended to include objects experiencing deformation. For deformed swept volume, it is found that the structure and algorithm of sweep-envelope differential equation (SEDE) are similar between the deformed and the rigid swept volumes. The efficiency of SEDE approach for deformed swept volume is proved with an example.

1.3μm broadband swept sources with enhanced nonlinear effects

In this work,a new structure is used to enhance the nonlinear effect in the cavity,which improvesthe performance of the 1.3μm broadband swept source.The swept source adopts a semiconductoroptical amplifier(SOA),a circulator,a coupler,and a tunable filter.In the structure,the lightpasses through the nonlinear medium(SOA)twice in two opposite directions,which excites thenonlinear ffect and increases the performance of the swept source.The tunable filter is based on apolygon rotating mirror and gratings.Traditionally,multiple SOAs are adopted to improve thesweep range and the optical power,which increases the cost and complexity of the swept source.The method proposed in this paper can improve the spectral range and optical power of the sweptsources without additional accessories.For the short-cavity swept source,the power increasesfrom 6 mW to 7.7 mW,and the sweep range increases from 98 nm to 120 nm.The broadband swept sources could have wide applications in biomedical imaging,sensor system,measurementand so on.

Experimental Study on the Aerodynamic Performance of Swept-Curved Blade

Compared with a straight blade, a unique compressor blade integratedforward-swept and positive-curved stacking line is studied experimentally. Aerodynamic parameters ofthe two cascades are measured by a five-hole probe at different positions and ink trace flowvisualization is conducted on blade surfaces. The result shows that the swept-curved cascade haslower endwall loss and higher midspan loss as compared with the straight cascade. However, lowerloss is accompanied with lower diffusion factor. Opposite 'C' shape static pressure distribution isestablished on the suction surface of the swept-curved blade, which is helpful for avoiding theaccumulation of low energy fluid in the endwall corner region. Anyhow the studies support theconclusion that the swept-curved blade conduces to not only the reduction of overall loss but alsothe improvement of stable operation in the endwall corner region.

Bimodal imaging of proliferative diabetic retinopathy vascular features using swept source optical coherence tomography angiography

AIM： To categorize neovessels morphology and to detect response to anti-angiogenic therapy by using structural and angiographic modes of swept source optical coherence tomography（SS-OCT）.METHODS： Thirty-two eyes with neovessels at disc（NVD） and neovessels elsewhere（NVE）-as diagnosed by fluorescein angiography-were included. Cross sectional OCT images of disc and macular regions were registered to enface OCT angiography（OCTA）, B-scan blood flow over lay and density maps. Three eyes received antiangiogenic treatment.RESULTS： Pin point registration of cross-sectional OCT and OCTA images differentiated active NVD with vascular elements from fibrous or equivalent fibrovascular elements. En face images delineated NVE as vascular tufts or area of filling while cross-sectional images differentiated NVE from microvascular intraretinal abnormality（IRMA）. All cases were associated with enlargement of foveal avascular zone and or areas of capillary non perfusion. Regressed NVD appeared as ghost vessel or pruned vascular loops after injection.CONCLUSION： Structural and angiographic modes of SS-OCT can detect, characterize and categorize the pattern of wide spectrum of neovessels based on blood flow data and density maps. It is potentially useful to detect ischemic changes in the vascular bed and regression of NVD after therapeutic regimens providing substitute for invasive techniques.

PDGI-BASED REGULAR SWEPT SURFACE EXTRACTION FROM POINT CLOUD

A principal direction Gaussian image （PDGI）-based algorithm is proposed to extract the regular swept surface from point cloud. Firstly, the PDGI of the regular swept surface is constructed from point cloud, then the bounding box of the Gaussian sphere is uniformly partitioned into a number of small cubes （3D grids） and the PDGI points on the Gaussian sphere are associated with the corresponding 3D grids. Secondly, cluster analysis technique is used to sort out a group of 3D grids containing more PDGI points among the 3D grids. By the connected-region growing algorithm, the congregation point or the great circle is detected from the 3D grids. Thus the translational direction is determined by the congregation point and the direction of the rotational axis is determined by the great circle. In addition, the positional point of the rotational axis is obtained by the intersection of all the projected normal lines of the rotational surface on the plane being perpendicular to the estimated direction of the rotational axis. Finally, a pattem search method is applied to optimize the translational direction and the rotational axis. Some experiments are used to illustrate the feasibility of the above algorithm.

Observation of the early blood vessels of cutaneous malignant melanoma using Swept Source Optical Coherence Tomography A ngiography(SS-OCTA)

Melanoma,characterized by high mortality,rapid development and accompanied with angio-genesis is the most typical malignant tumor in skin cancer.Hence,the detection of blood vessels is of much significanoe.The early vascular network has small scale.If we remove the tumor early and biopsy it,it will increase the spread of the cancer cells and infection and bleeding.In this case,we presented a new angiography method.A high-resolution OCT system for noninvasive an-giographic imaging of early skin melanoma-Swept Source Optical Coberence Tomography Angiography(SS-OCTA)is proposed.With a high lateral resolution of 10pm in vrivo tomographic angiography,SS-OCTA is used to image and identify the morphology of the early tumor blood vessels.In addition,a control group experiment is conducted to observe the growth of melanoma in the process of rupture,malormation of micro-vessels.The results of the analysis and statistical test(P<0.05)are statistically signifcant.

Broadband and high-speed swept external-cavity laser using a quantum-dot superluminescent diode as gain device

A wide wavelength tuning range swept external-cavity laser using an In As/Ga As quantum-dot superluminescent diode as a gain device is demonstrated. The tunable filter consists of a polygon scanner and a grating in Littrow telescope-less configuration. The swept laser generates greater than 54-m W peak output power and up to 33-k Hz sweep rate with a sweep range of 150 nm centered at 1155 nm. The effects of injection current and sweep rate on the sweep performance of the swept laser are studied.

STUDY OF SWEPT SHOCK WAVE AND BOUNDARY LAYER INTERACTIONS

This paper presents briefly the recent progress on study of swept shock wave/boundary layer interactions with emphasis on application of zonal analysis and correlation analysis to them. Based on the zonal analysis an overall framework of complicated interaction flow structure including both surface flowfield and space flowfield is discussed. Based on correlation analysis the conical interactions induced by four families of shock wave generators have been discussed in detail. Some control parameter and physical mechanism of conical interaction have been revealed. Finally some aspects of the problem and the prospects for future work are suggested.

A NOVEL SWEPT LASER SOURCE BASED ON COMBINED TUNABLE FILTERS FOR OCT

A novel broad tunable bandwidth and narrow instantaneous line-width linear swept laser source using combined tunable filters working at 1,300 nm center wavelength is proposed.The combined filters consist of a fiber Fabry
Perot tunable filter and a tunable filter based on diffractive grating with scanning polygon mirror.In contrast to traditional method using single tunable filter,the trade-off between bandwidth and instantaneous line-width is alleviated.Parallel implementation of two semiconductor optical amplifiers with different wavelength range is adopted in the laser resonator for broadband light amplification.The Fourier domain mode locking swept laser source with combined tunable filters offers broadband tunable range with narrow instantaneous line-width,which is especially benefiting for high-quality optical frequency domain imaging.The proposed Fourier domain mode locking swept laser source provides a tuning range of 160 nm with instantaneous line-width of about 0.01nm at sweeping rate of 15 kHz,a finesse of 16,000 is thus achieved.

Theoretical Study of Wind Turbine Model with a New Concept on Swept Area

Commercially available wind-turbines are optimized to operate at certain wind velocity, known as rated wind velocity. For other values of wind velocity, it has different output which is lower than the rated output of the wind plant. Wind mill can be designed to provide maximum power output at different wind velocities through modification of swept area to match with the wind speed available at the moment. This can result in higher power output at all the velocities except that at rated wind speed because of limitation of generator. This results in increased utilization of generation capacity of wind mill compared to its commercially designed counterpart. A theoretical simulation has been done to prove a new concept about swept area of wind turbine blade which results in a significant increase in the power output through the year. Simulation results of power extracted through normal wind blade design and new concept are studied and compared. The findings of the study are presented in graphical and tabular form. Study establishes that there can be a significant gain in the power output with the new concept.

A THEORETICAL INVESTIGATION OF THE DEVELOPMENT OF STATIONARY CROSSFLOW VORTICES IN THE BOUNDARY LAYER ON A SWEPT WING

Crossflow instability plays very important role in the transition of the boundary layer on a swept wing, typical in the engineering applications. Experiments revealed that the linear stability theory well predicted the form of the crossflow vortices, but usually much overpredicted their growth rate. Using nonlinear theory of hydrodynamic stability, combined with some other considerations, we were able to obtain the growth rate in good agreement with experimental observations.

A Windstorm Swept over Intellectual Capitalists

InSeptember1999.JiangQiping'snewbook,AWindstormSweptOverIntellectualCapitalists.,causedquiteastirwhenitfirstappearedinBeijing'sbookstores.Theideaofanintellectualcapitalist,althoughnotinventedbythisinstantbestselles,hasbecomeahottopicofdiscussionamong...

Micro-mechanisms of residual oil mobilization by viscoelastic fluids

Four typical types of residual oil, residual oil trapped in dead ends, oil ganglia in pore throats, oil at pore corners and oil film adhered to pore walls, were studied. According to main pore structure characteristics and the fundamental morphological features of residual oil, four displacement models for residual oil were proposed, in which pore-scale flow behavior of viscoelastic fluid was analyzed by a numerical method and micro-mechanisms for mobilization of residual oil were discussed. Calculated results indicate that the viscoelastic effect enhances micro displacement efficiency and increases swept volume. For residual oil trapped in dead ends, the flow field of viscoelastic fluid is developed in dead ends more deeply, resulting in more contact with oil by the displacing fluid, and consequently increasing swept volume. In addition, intense viscoelastic vortex has great stress, under which residual oil becomes small oil ganglia, and finally be carried into main channels. For residual oil at pore throats, its displacement mechanisms are similar to the oil trapped in dead ends. Vortices are developed in the depths of the throats and oil ganglia become smaller. Besides, viscoelastic fluid causes higher pressure drop on oil ganglia, as a driving force, which can overcome capillary force, consequently, flow direction can be changed and the displacing fluid enter smaller throats. For oil at pore corners, viscoelastic fluid can enhance displacement efficiency as a result of greater velocity and stress near the corners. For residual oil adhered to pore wall, viscoelastic fluid can provide a greater displacing force on the interface between viscoelastic fluid and oil, thus, making it easier to exceed the minimum interfacial tension for mobilizing the oil film.

Enhanced oil recovery mechanisms of polymer flooding in a heterogeneous oil reservoir

Taking reservoir rocks and fluids of the Daqing,Dagang and Changqing oilfields as research objects,the EOR mechanisms and technical approach of polymer flooding were discussed.By comparing the displacement performances of ordinary polymer,glycerol,polymer in"sheet-net"structure and heterogeneous weak gel at the same viscosity and concentration,the relationship between the viscosity of polymer displacement agents and displacement performance was demonstrated,and the method of improving polymer flooding effect was worked out.The main mechanism of polymer flooding to increase oil recovery is the swept volume expansion of water injection due to polymer retention in porous media.The viscosity of polymer agents has no positive correlation with polymer flooding effect.Although polymer of"sheet-net"structure has strong capacity in increasing viscosity,it has poor compatibility with pore throat structure of reservoir rock,low injectivity and low shear resistance.Heterogeneous weak gel system has higher adsorption and capture capacity in porous media,which is easy to retain in porous media,and can effectively establish seepage resistance in high permeability layers(zones).Compared with polymer solutions with the same viscosity or concentration,it has stronger ability to expand swept volume.Long term injection of polymer flooding agents will inevitably lead to fluid entry profile reversal,and thus worsening of polymer flooding effect.Alternate injection of high retention and low or non-retention displacement agents can further improve the displacement effect of polymer flooding agents.

Discussion on the limit recovery factor of carbon dioxide flooding in a permanent sequestration scenario

Based on practices of CO_(2) flooding tests in China and abroad,the recovery factor of carbon dioxide capture,utilization in displacing oil and storage(CCUS-EOR)in permanent sequestration scenario has been investigated in this work.Under the background of carbon neutrality,carbon dioxide injection into geological bodies should pursue the goal of permanent sequestration for effective carbon emission reduction.Hence,CCUS-EOR is an ultimate development method for oil reservoirs to maximize oil recovery.The limit recovery factor of CCUS-EOR development mode is put forward,the connotation differences between it and ultimate recovery factor and economically reasonable recovery factor are clarified.It is concluded that limit recovery factor is achievable with mature supporting technical base for the whole process of CCUS-EOR.Based on statistics of practical data of CO_(2) flooding projects in China and abroad such as North H79 block CO_(2) flooding pilot test at small well spacing in Jilin Oilfield etc.,the empirical relationship between the oil recovery factor of miscible CO_(2) flooding and cumulative CO_(2) volume injected is obtained by regression.Combined with the concept of oil production rate multiplier of gas flooding,a reservoir engineering method calculating CO_(2) flooding recovery factor under any miscible degree is established by derivation.It is found that when the cumulative CO_(2) volume injected is 1.5 times the hydrocarbon pore volume(HCPV),the relative deviation and the absolute difference between the recovery percentage and the limit recovery factor are less than 5%and less than 2.0 percentage points respectively.The limit recovery factor of CCUS-EOR can only be approached by large pore volume(PV)injection based on the technology of expanding swept volume.It needs to be realized from three aspects:large PV injection scheme design,enhancing miscibility degree and continuously expanding swept volume of injected CO_(2).

Macular Bruch's membrane defects and other myopic lesions in high myopia

AIM: To compare the ocular fundus features of highly myopic eyes with and without macular Bruch’s membrane(BM) defects and investigate the associations between macular BM defects and other myopic lesions.METHODS: This retrospective, observational case series included 262 eyes(139 patients) with high myopia(HM) refractive error ≥-6.0 diopters(D) or axial length ≥26.5 mm from March 2019 to December 2019.The patients underwent a comprehensive ophthalmic examination, including sweptsource optical coherence tomography(SS-OCT).The features of macular BM defects and other ocular fundus lesions were examined in OCT images.RESULTS: Totally 51 eyes(19.5%) were detected with macular BM defects, which were characterized by a lack of BM, retinal pigment epithelium(RPE), and an almost complete loss of photoreceptors or choriocapillaris.Eyes with macular BM defects had worse best-corrected visual acuity(BCVA) than those without(P<0.001).Dome-shaped macula(DSM, P=0.042), retinal cysts(P=0.006), choroidal neovascularization(CNV, P<0.001), choroidal defects and abnormality(P=0.003), scleral defects(P=0.015), scleral deformation(P=0.005), posterior staphyloma(P=0.011), and perforating vessels(P<0.001) occurred more frequently in eyes with macular BM defects.In multivariate analysis, the presence of macular BM defects remained the significant association with presence of DSM(P=0.013), scleral defects(P=0.015), posterior staphyloma(P=0.001), perforating vessels(P<0.001) and CNV(P=0.004).CONCLUSION: Macular BM defects has a prevalence of approximately 20% in HM and it has tight association with other myopic fundus lesions.BM might be crucial in the pathogenesis of myopic fundus lesions due to its biomechanical function.A comprehensive understanding of BM’s role is useful for further researches about myopic lesions.

A hindcast of the Bohai Bay oil spill during June to August 2011

An operational three-dimensional oil spill model is developed by the National Marine Environmental Forecasting Center（NMEFC）, State Oceanic Administration, China, and the model has been running for 9 a. On June 4 and 17,2011, oil is spilled into the sea water from two separate oil platforms in the Bohai Bay, i.e., Platforms B and C of Penglai 19-3 oilfield. The spill causes pollution of thousands of square kilometres of sea area. The NMEFC’s oil spill model is employed to study the Penglai 19-3 oil-spill pollution during June to August 2011. The wind final analysis data of the NMEFC, which is based on a weather research and forecasting（WRF） model, are analyzed and corrected by comparing with the observation data. A corrected current filed is obtained by forcing the princeton ocean model（POM） with the corrected wind field. With the above marine environmental field forcing the oil spill model, the oil mass balance and oil distribution can be produced. The simulation is validated against the observation, and it is concluded that the oil spill model of the NMEFC is able to commendably simulate the oil spill distribution. Thus the NMEFC’s oil spill model can provide a tool in an environmental impact assessment after the event.

SeaBeam全海深多波束测深系统及应用

为更好地发挥SeaBeam深水多波束系统在深远海海洋调查中获取高精度地形地貌数据的作用、方便广大调查和研究人员使用,本文以SeaBeam3012多波束为例,较系统地分析介绍了其测量技术原理。开展了该系统的硬件组成、设备功能和技术特点等方面的介绍,从声学和信号处理等角度对其Swept Beam技术进行分析,并以“向阳红01”船某次调查任务为例,验证了该系统在深远海海洋调查中的应用效果。实例结果表明:SeaBeam3012系统可获得宽条带、高精度测量结果,性能更优于传统的分扇区扫描发射方式的多波束系统;SeaBeam3012系统采用Swept Beam技术实现了全水深范围内实时精确补偿船体横摇、纵摇和艏摇,使得测深条带在海底几乎平行排列;同时SeaBeam3012系统也极大地利用了低频带宽资源,提高了测深分辨率。