Quantum dot cellular automata(QCA)is promising nanotechnology due to the three main advantages:faster speed,nanoscale size,and ultrasmall power consumption.This paper proposed a simple data path selector cum router as...Quantum dot cellular automata(QCA)is promising nanotechnology due to the three main advantages:faster speed,nanoscale size,and ultrasmall power consumption.This paper proposed a simple data path selector cum router as the‘multiplexerchannel-demultiplexer’unit using QCA,an unavoidable building block of nano communication.A Simple 2×2 block and the extended 4×4 block of data path selectors have been proposed in this article.The layouts of the proposed designs have been verified in QCADesigner,and the energy dissipation has been evaluated using two tools,QCAPro and QCQDesigner-E(QDE).The suggested designs reached a significant improvement in cell complexity(cell count)and covered area over the existing designs.In precise,the proposed 2×2(4×4)block shows 86%(63%)lower cell complexity and 87%(37%)smaller area than the prior reported similar designs.In addition,the currently reported 2×2(4×4)unit has 86%(60%)lower QDE based energy dissipation compared with prior reported designs.展开更多
We report a strict non-blocking four-port optical router that is used for a mesh photonic network-on-chip on a silicon-on-insulator platform.The router consists of eight silicon microring switches that are tuned by th...We report a strict non-blocking four-port optical router that is used for a mesh photonic network-on-chip on a silicon-on-insulator platform.The router consists of eight silicon microring switches that are tuned by the thermo-optic effect.For each tested rousting state,the signal-to-noise ratio of the optical router is larger than 13.8 dB at the working wavelength.The routing functionality of the device is verified.We perform 40 Gbps nonreturn to zero code data transmission on its 12 optical links.Meanwhile,data transmission using wavelength division multiplexing on eight channels in the C band(from 1525 to 1565 nm)has been adopted to increase the communication capacity.The optical router’s average energy efficiency is 25.52 fJ/bit.The rising times(10%to 90%)of the eight optical switch elements are less than 10μs and the falling times(90%-10%)are less than 20μs.展开更多
电能路由器(electrical energy router,EER)可实现新能源、储能及多种电能负载的灵活接入,协调控制和运行模式切换是其运行控制的重点。为实现EER运行模式的平稳过渡,降低EER运行模式切换时母线稳压单元控制模式改变导致的切换冲击,首...电能路由器(electrical energy router,EER)可实现新能源、储能及多种电能负载的灵活接入,协调控制和运行模式切换是其运行控制的重点。为实现EER运行模式的平稳过渡,降低EER运行模式切换时母线稳压单元控制模式改变导致的切换冲击,首先分析并网和孤岛两种运行模式切换时的电压扰动机理,研究系统内功率突变以及母线稳压单元控制器的调节过程对系统的影响。然后设计EER模式切换时序,提出一种基于移相比保持器、电流保持器的控制器输出量提前补偿的模式切换协调控制策略,能够实现端口功率的实时平衡,降低模式切换暂态过程中的电压扰动,提升系统的暂态稳定性。最后,通过Matlab/Simulink仿真软件搭建EER仿真模型,验证了所提控制策略的有效性。展开更多
文摘Quantum dot cellular automata(QCA)is promising nanotechnology due to the three main advantages:faster speed,nanoscale size,and ultrasmall power consumption.This paper proposed a simple data path selector cum router as the‘multiplexerchannel-demultiplexer’unit using QCA,an unavoidable building block of nano communication.A Simple 2×2 block and the extended 4×4 block of data path selectors have been proposed in this article.The layouts of the proposed designs have been verified in QCADesigner,and the energy dissipation has been evaluated using two tools,QCAPro and QCQDesigner-E(QDE).The suggested designs reached a significant improvement in cell complexity(cell count)and covered area over the existing designs.In precise,the proposed 2×2(4×4)block shows 86%(63%)lower cell complexity and 87%(37%)smaller area than the prior reported similar designs.In addition,the currently reported 2×2(4×4)unit has 86%(60%)lower QDE based energy dissipation compared with prior reported designs.
基金National Key Research and Development Program of China(2019YFB2203602)National Science Fund for Distinguished Young Scholars(61825504).
文摘We report a strict non-blocking four-port optical router that is used for a mesh photonic network-on-chip on a silicon-on-insulator platform.The router consists of eight silicon microring switches that are tuned by the thermo-optic effect.For each tested rousting state,the signal-to-noise ratio of the optical router is larger than 13.8 dB at the working wavelength.The routing functionality of the device is verified.We perform 40 Gbps nonreturn to zero code data transmission on its 12 optical links.Meanwhile,data transmission using wavelength division multiplexing on eight channels in the C band(from 1525 to 1565 nm)has been adopted to increase the communication capacity.The optical router’s average energy efficiency is 25.52 fJ/bit.The rising times(10%to 90%)of the eight optical switch elements are less than 10μs and the falling times(90%-10%)are less than 20μs.
文摘电能路由器(electrical energy router,EER)可实现新能源、储能及多种电能负载的灵活接入,协调控制和运行模式切换是其运行控制的重点。为实现EER运行模式的平稳过渡,降低EER运行模式切换时母线稳压单元控制模式改变导致的切换冲击,首先分析并网和孤岛两种运行模式切换时的电压扰动机理,研究系统内功率突变以及母线稳压单元控制器的调节过程对系统的影响。然后设计EER模式切换时序,提出一种基于移相比保持器、电流保持器的控制器输出量提前补偿的模式切换协调控制策略,能够实现端口功率的实时平衡,降低模式切换暂态过程中的电压扰动,提升系统的暂态稳定性。最后,通过Matlab/Simulink仿真软件搭建EER仿真模型,验证了所提控制策略的有效性。
基金~~Supported by the National Natural Science Foundation of China under Grant No.90104002 the National High Technology Development 863 Program of China under Grant No.863-306-ZD-07-01
