In order to enhance the transient performance of aircraft high voltage DC(HVDC)generation system with wound rotor synchronous machine(WRSM)under a wide speed range,the nonlinear PI multi-loop control strategy is propo...In order to enhance the transient performance of aircraft high voltage DC(HVDC)generation system with wound rotor synchronous machine(WRSM)under a wide speed range,the nonlinear PI multi-loop control strategy is proposed in this paper.Traditional voltage control method is hard to achieve the dynamic performance requirements of the HVDC generation system under a wide speed range,so the nonlinear PI parameter adjustment,load current feedback and speed feedback are added to the voltage and excitation current double loop control.The transfer function of the HVDC generation system is derived,and the relationship between speed,load current and PI parameters is obtained.The PI parameters corresponding to the load at certain speed are used to shorten the adjusting time when the load suddenly changes.The dynamic responses in transient processes are analyzed by experiment.The results illustrate that the WRSM HVDC generator system with this method has better dynamic performance.展开更多
Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling scheme...Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling schemes of air cooling and water cooling are calculated respectively.For the structure I air cooling system,the influence of different number of heat sink on the maximum temperature rise and pressure drop of fluid channel is analyzed,and the parameters of heat sink are optimized.For the structure II air cooling system,the influence of setting fillet at the turn back of the fluid channel on the head loss in the fluid domain of the motor is analyzed,and the influence of different fillet radius on the head loss and the maximum temperature rise in the fluid domain is obtained.For the structure II water cooling system,the influence of different water flow speed on the maximum temperature rise of the motor is analyzed,and the influence of different assembly clearance of modular stator teeth and yoke on the maximum temperature rise of the motor is analyzed.The cooling effect and temperature rise distribution characteristics of the three cooling schemes are compared and analyzed.Finally,a water-cooled prototype is manufactured,and the temperature rise experiment is carried out,and the influence of the thermal deformation of fluid channel,stator yoke and stator teeth on the maximum temperature of the motor is analyzed.The results show that the calculated temperature field after considering the thermal deformation is closer to the experimental value,which verifies the accuracy of the calculation results,It also provides a reference for the selection and design of the cooling structure of the same type of PMSM electric roller.展开更多
With the development of more electric aircraft(MEA),higher demands for electrical energy are put forward in generation systems.Compared to constant frequency AC(CFAC)generation systems,the constant speed drive(CSD)is ...With the development of more electric aircraft(MEA),higher demands for electrical energy are put forward in generation systems.Compared to constant frequency AC(CFAC)generation systems,the constant speed drive(CSD)is eliminated and integrated starter/generator(SG)can be realized in variable frequency AC(VFAC)generation systems.In this paper,an overview of VFAC generators for safety-critical aircraft applications is presented,with a particular focus on the key features and requirements of candidate generators and the starting control strategies.Wound rotor synchronous machines(WRSMs)are typical generators used in VFAC generation systems so far.Meanwhile,hybrid excitation synchronous machines(HESMs)and cage-type induction machines are promising candidates for VFAC generation systems.The generation operation of WRSM is relatively mature,however,the SG technology of WRSM is still full of challenges.As one of the most important issues,the starting excitation methods of WRSM are summarized.An HESM-based VFAC SG system is proposed and developed in this paper.The experimental results show that the starting mode,transition mode and generating mode of the VFAC SG system are realized.The continuous progress of VFAC generation system makes great contributions to the realization of MEA.展开更多
基金supported by funded by"Ye Qisun"Joint Foundation Project supported by the State Key Program of National Natural Science Foundation of China under Award U2141223.
文摘In order to enhance the transient performance of aircraft high voltage DC(HVDC)generation system with wound rotor synchronous machine(WRSM)under a wide speed range,the nonlinear PI multi-loop control strategy is proposed in this paper.Traditional voltage control method is hard to achieve the dynamic performance requirements of the HVDC generation system under a wide speed range,so the nonlinear PI parameter adjustment,load current feedback and speed feedback are added to the voltage and excitation current double loop control.The transfer function of the HVDC generation system is derived,and the relationship between speed,load current and PI parameters is obtained.The PI parameters corresponding to the load at certain speed are used to shorten the adjusting time when the load suddenly changes.The dynamic responses in transient processes are analyzed by experiment.The results illustrate that the WRSM HVDC generator system with this method has better dynamic performance.
基金This work has been supported by the National Natural Science Foundation of China(51907129)Project Supported by Department of Science and Technology of Liaoning Province(2021-MS-236).
文摘Aiming at the problem of temperature rise of mine flameproof outer rotor permanent magnet synchronous motor,based on the fluid structure coupling method,the temperature distribution of motor under three cooling schemes of air cooling and water cooling are calculated respectively.For the structure I air cooling system,the influence of different number of heat sink on the maximum temperature rise and pressure drop of fluid channel is analyzed,and the parameters of heat sink are optimized.For the structure II air cooling system,the influence of setting fillet at the turn back of the fluid channel on the head loss in the fluid domain of the motor is analyzed,and the influence of different fillet radius on the head loss and the maximum temperature rise in the fluid domain is obtained.For the structure II water cooling system,the influence of different water flow speed on the maximum temperature rise of the motor is analyzed,and the influence of different assembly clearance of modular stator teeth and yoke on the maximum temperature rise of the motor is analyzed.The cooling effect and temperature rise distribution characteristics of the three cooling schemes are compared and analyzed.Finally,a water-cooled prototype is manufactured,and the temperature rise experiment is carried out,and the influence of the thermal deformation of fluid channel,stator yoke and stator teeth on the maximum temperature of the motor is analyzed.The results show that the calculated temperature field after considering the thermal deformation is closer to the experimental value,which verifies the accuracy of the calculation results,It also provides a reference for the selection and design of the cooling structure of the same type of PMSM electric roller.
基金Supported by the National Natural Science Foundation for Outstanding Young Scholar of China under Award 51622704Jiangsu Provincial Science Funds for Distinguished Young Scientists under Award BK20150033.
文摘With the development of more electric aircraft(MEA),higher demands for electrical energy are put forward in generation systems.Compared to constant frequency AC(CFAC)generation systems,the constant speed drive(CSD)is eliminated and integrated starter/generator(SG)can be realized in variable frequency AC(VFAC)generation systems.In this paper,an overview of VFAC generators for safety-critical aircraft applications is presented,with a particular focus on the key features and requirements of candidate generators and the starting control strategies.Wound rotor synchronous machines(WRSMs)are typical generators used in VFAC generation systems so far.Meanwhile,hybrid excitation synchronous machines(HESMs)and cage-type induction machines are promising candidates for VFAC generation systems.The generation operation of WRSM is relatively mature,however,the SG technology of WRSM is still full of challenges.As one of the most important issues,the starting excitation methods of WRSM are summarized.An HESM-based VFAC SG system is proposed and developed in this paper.The experimental results show that the starting mode,transition mode and generating mode of the VFAC SG system are realized.The continuous progress of VFAC generation system makes great contributions to the realization of MEA.