Synchronous double cancers of the common bile duct

We report an extremely rare case of synchronous double cancers of the common bile duct without pancreaticobiliary maljunction.Only two similar cases have been reported in the English literature.Endoscopic retrograde cholangiopancreatography showed a tuberous filling defect in the middle and superior parts of the common bile duct,and mild stenosis in the inferior duct.Computed tomography(CT) showed a well enhanced mass in the middle and superior parts of the common bile duct.A single cancer of the middle and superior bile duct was suspected and extra-hepatic bile duct resection was performed.CT eleven months after surgery revealed enhanced inferior bile duct wall and a slightly enhanced tumor within it.Retrospective review of the CT images taken before first surgery showed enhanced inferior bile duct wall without intrabiliary tumor only on the delayed phase.The inferior bile duct tumor was suspected to have originally co-existed with the middle and superior bile duct tumor.Pancreaticoduodenectomy was performed subsequently.Histopathological examination revealed that the middle and superior bile duct tumor was a moderately differentiated tubular adenocarcinoma while the inferior bile duct tumor was a papillary adenocarcinoma.The two tumors were separated and had different histological findings and growth patterns,further suggesting that they were two primary cancers.

Double Position Servo Synchronous Drive System Based on Cross-Coupling Integrated Feedforward Control for Broacher

Synchronization errors directly deteriorate the machining accuracy of metal parts and the existed method cannot keep high synchronization precision because of external disturbances. A new double position servo synchronous driving scheme based on semi-closed-loop cross- coupling integrated feedforward control is proposed. The scheme comprises a position error cross-coupling feedfor-ward control and a load torque identification with feed- forward control. A digital integrated simulation system for the dual servo synchronous drive system is established. Using a 20 t servo broacher, performance analysis of the scheme is conducted based on this simulation system and the simulation results show that systems with traditional parallel or single control have problems when the work- table works with an unbalanced load. However, the system with proposed scheme shows good synchronous perfor- mance and positional accuracy. Broaching tests are performed and the experimental results show that the maximum dual axis synchronization error of the system is only 8μm during acceleration and deceleration processes and the error between the actual running position and the given position is almost zero. A double position servo synchronous driving scheme is presented based on crosscoupled integrated feedforward compensation control, which can improve the synchronization precision.

Calculation for electromagnetic torque of double-stator-permanent magnet synchronous motor

Presents the mathematic model built for double stator permanent magnet synchronous motors through a brief analysis of their future development, and the equations established for calculation of their torques, and the development of prototypes, and discusses the comparison of the motor under development with the conventional motors with the same volume, stator structure, and magnet shape, and concludes the motor under development is one of the ways to improve the performance/volume ratio of motors.

Surgical Treatment and Prognosis of Synchronous Double Primary Lung Cancer： a Report of 31 Cases

OBJECTIVE The concept of double primary lung cancer （DPLC） has been generally accepted. Recently, an increasing incidence of synchronous DPLC has been reported, while the diagnostic standard and treatment strategies remain to be improved. This study was conducted to investigate effective surgical treatment and prognosis of synchronous DPLC. METHODS From January 1983 to April 2004, 31 patients with synchronous DPLC were operated in our department. Clinical data, such as surgical pattern, postoperative complications, and survival status, of all these patients were reviewed retrospectively. RESULTS The 31 patients with synchronous DPLC accounted for 0.67% of all the 4,649 patients operated for primary lung cancer in our department during the same period. Both tumors of the synchronous DPLC were resected with Iobectomy or pneumonectomy in 12 patients, while among the other 19 patients at least 1 tumor was treated with partial pulmonary resection. The postoperative morbidity was 29%（9/31）, including 1 case of respiratory insufficiency, 3 cases of atelectasis, 2 cases of atrial fibrillation, 1 case of haemoptysis, 1 case of pleural effusion, and 1 case of wound fat necrosis. No deaths occurred during the operations or within 30 days postoperatively. The postoperative 1 -, 3-, and 5-year survival rates were 52%, 29%, and 20%, respectively. CONCLUSION The incidence of synchronous DPLC is low. An aggressive and reasonable surgical approach can achieve a satisfactory outcome in patients with synchronous DPLC. The postoperative morbidity is low. Some patients might achieve long-term survival.

High-Grade Extremity Myxofibrosarcoma with Synchronous Mesenteric Leiomyosarcoma: Double Primary Sarcomas

Here, we report the case of a 47-year-old male who presented with a painless palpable mass in the right shoulder. This extremity tumor was diagnosed as a high-grade myxofibrosarcoma after a wide excision. Simultaneously, a synchronous mesenteric mass was discovered, which proved to be a leiomyosarcoma.

Development of High-Thrust and Double-Sided Linear Synchronous Motor Module For Liquid Crystal Display Equipment

Recently,there is an increasing requirement for controlling linear motion up to a few hundred of millimeter strokes in the area of the liquid crystal display(LCD) production equipment.The requirements of the motion system for LCD production equipment are high acceleration and high velocity with positioning accuracy.To satisfy these requirements,it has to be designed with the high-thrust force and low velocity ripple.In this work, high-thrust and double-sided linear synchronous motor (LSM)module is proposed and the developed high-thrust and double-sided LSM module is verified by performance test.

Double compound combination synchronization among eight n-dimensional chaotic systems

Depending on double compound synchronization and compound combination synchronization, a new kind of syn- chronization is introduced which is the double compound combination synchronization （DCCS） of eight n-dimensional chaotic systems. This kind may be considered as a generalization of many types of synchronization. In the communica- tion, based on many of drive and response systems, the transmitted and received signals will be more secure. Using the Lyapunov stability theory and nonlinear feedback control, analytical formulas of control functions are obtained to insure our results. The corresponding analytical expression and numerical treatment are used to show the validity and feasibility of our proposed synchronization scheme. The eight memristor-based Chua oscillators are considered as an example. Other examples can be similarly investigated. The proposed synchronization technique is supported using the MATLAB simula- tion outcomes. We obtain the same results of numerical treatment of our synchronization using simulation observations of our example.

Complete synchronization of double-delayed Rssler systems with uncertain parameters

In this paper, we investigate complete synchronization of double-delayed RSssler systems with uncertain parameters as the master system is in chaotic synchronization. The uncertain parameters can be nonlinearly expressed in the system. The analysis and proof are given by means of the Lyapunov stability theorem. Based on theoretical analysis, some sufficient conditions of complete synchronization are proved. In order to validate the proposed scheme, numerical simulations are performed and the numerical results show that our scheme is very effective.

A Microwave High Power Static Induction Transistor with Double Dielectrics Gate Structure

The designing approaches and key fabricating technologies for high frequency high power double dielectrics gate static induction transistor (DDG SIT) with mixed non-saturating I-V characteristics are presented.The effects of parasitic gate-source capacitance (C gs) on the power performance of SIT are discussed.The main methods and considerations to diminish C gs,consequently to improve the high power performance are given.Synchronous epitaxy technology is the critical step to decrease C gs.The 7-μm pitch DDG SIT delivering output power >20W with >7dB power gain and >70% drain efficiency at 400MHz,and delivering output power >7W with >5dB power gain and >50% drain efficiency at 700MHz are successfully fabricated.

EFFECTIVE DOUBLE LOOP CONTROL FOR A SQUARE WAVE BRUSHLESS DC MOTOR

A new type of brushless DC motor has been developed by using a square wave rare earth permanent magnet synchronous motor with its double loop control circuit. The double loop control scheme of the drive system yields a combination of desired characteristics including simplified control structure, small ripple torque, high speed accuracy, wide operating speed range, and fast dynamic response. Experimental results confirm excellent characteristics of the motor.

JMM与double/long变量同步方法探究

Java存储模型是Java语言和Java虚拟机研究中的核心关键部分。Java语言规范规定:所有对基本类型的操作,除了对double/long类型的操作之外,都必须是原子级的。Java提供的volatile关键字可以使double/long变量实现变量级同步,但仍不能保证线程间同步。针对这些不足,结合实例分析了Java内存模型,synchronized方法,引入了硬件原语(CAS),给出了非阻塞算法的同步策略。

Synchronous gastric adenocarcinoma and pancreatic ductal adenocarcinoma

BACKGROUND:The association between gastric and pancreatic carcinoma is a relatively rare condition.In gastric carcinoma patients,the prevalence of second tumors varies 2.8% to 6.8% according to the reported statistics.Gastric cancer associated with pancreatic cancer is uncommon.METHODS:We report a case of a 73-year-old patient hospitalized for vomiting and weight loss.Esophagogastroduodenoscopy demonstrated an ulcerative lesion of the gastric antrum.Computed tomography and magnetic resonance showed a gastric thickening in the antral and pyloric portion and a nodular mass (3×1.7 cm) in the uncinate portion of the pancreas.RESULTS:The patient underwent pancreaticoduoden-ectomy according to Whipple regional type Ⅰ Fortner.Histological examination of the specimen demonstrated a moderately differentiated adenocarcinoma of the stomach and a poorly differentiated ductal adenocarcinoma of the pancreas.CONCLUSIONS:Long survival is rare in patients with associated gastric and pancreatic cancer.Surgical resection remains the only potentially curative treatment.

Simulation on model predictive control for PMSM drive system based on double extended state observer

A novel double extended state observer(DESO)based on model predictive torque control(MPTC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive system without current sensor.In general,to achieve high-precision control,two-phase current sensors are necessary for successful implementation of MPTC.For this purpose,two ESOs are used to estimate q-axis current and stator resistance respectively,and then based on this,d-axis current is estimated.Moreover,to reduce torque and flux ripple and to improve the performance of the torque and speed,MPTC strategy is designed.The simulation results validate the feasibility and effectiveness of the proposed scheme.

New Development in the Performance Improvement Synchronous Motor

Synchronous machines are dedicated to the specific application. They are generally employed in rolling mills, pumps, fans, and compressors like reprobating and centrifugal drives, pulp and paper processing, water treatment, mining, and in cement industries. As a synchronous motor, the performance is reduced for the given excitation while the load increases. When operated as synchronous generators, both power loads and lighting loads depend on the output from the armature winding. This paper presents an alternative choice in which by providing an additional winding in the stationary armature, when operated as a Double Winding Synchronous Motor (DWSyM), it becomes possible to operate in maximum power factor by adjusting the loads on both the stator windings. When operated as conventional motor, for the load current of 3.5 A, the efficiency is 55% and power factor is 0.55, for the same excitation when second winding is connected to a load current of 1 A, the efficiency is improved to 77.6% and power factor is improved to 0.66. The main focus of this machine is to improve the performance of the machine for the reduced excitation and minimum load. For the reduced excitation, the performance can be improved by loading both the windings. While operated as Double Winding Synchronous Generator (DWSyG), two stator outputs are available which help to separate the power and lighting circuits. Hence, interruption in the lighting circuit can be limited, this machine can be considered as Twin generator.

基于静止轴系改进高频方波注入同步磁阻电机无传感器控制

同步磁阻电机因为其成本低、可靠性高,发展前景可观。在低速域无传感器控制方面,因同步磁阻电机转子具有凸极性,使用高频方波信号注入方法进行转子角度估计最为合适。但是,电机在低速运行中伴随着交直轴电感交叉饱和问题,该问题影响着电机的动稳态性能。为此,对传统高频方波注入控制方法进行改进,提出基于静止轴系的双高频方波注入无传感器控制方法,降低高频幅值带来的高频转矩脉动,抑制因交叉饱和效应导致的角度估计误差,提高电机动稳态性能。在1.5 kW同步磁阻电机实验平台上进行实验验证。结果表明,与传统高频注入法相比,改进高频注入法消除了交叉饱合引起的角度估计误差,并降低高频信号带来的转矩脉动问题,提高了电机的动稳态性能。

面向多运行模式的并网逆变器改进控制策略

为了改善新能源并网逆变器的性能并同时满足多运行模式(并网模式和孤岛模式)调节需求,设计了双重自适应系数,并基于下垂控制和虚拟同步发电机(virtual synchronous generator,VSG)控制提出了新颖的改进控制策略。该控制策略可灵活地调节惯量和阻尼以满足不同运行模式的需求。设计的双重自适应系数包括自适应协调系数和自适应惯量系数,前者可提高系统动态特性并增强适用性,后者可进一步改善功率超调和振荡问题以完全消除功率超调。所提出的改进控制策略的功率响应无超调和振荡,能够提供接近于VSG控制的惯量和阻尼特性且具有更快的响应速度,可同时满足并网模式下的功率调节需求和孤岛模式下的频率调节需求,具有更大的适用性和更优异的动态特性。最后,通过硬件在环实验验证了所提出的改进控制策略的有效性和可行性。

大规模风电接入场景下的失步振荡中心定位方法

振荡中心的准确定位是失步保护正确动作的基础,大规模风电并网导致系统阻抗参数发生变化,使得传统基于阻抗轨迹的失步定位方法的适应性严重下降。针对该问题,提出基于节点频差的失步振荡中心定位方法。首先分析大规模风电并网对系统总阻抗的影响。进一步根据发电机功角,计算其曼哈顿距离相似度并构建启动判据。最后,通过移动平均法对广域测量频率进行平滑处理,提出基于节点频差的失步振荡中心定位方法。仿真验证表明,所提基于节点频差的失步振荡中心定位方法受噪声影响较小,不受风电渗透率的影响,能够准确定位失步振荡中心位置。

一种雷达转台双电机驱动系统设计与同步控制方法

作为机械传动系统的一个重要组成,转台被广泛应用于雷达系统中,为满足雷达检测等领域对转台驱动系统惯量、功率、性能方面的要求,提出采用双电机同步驱动转台的方式。利用双电机伺服系统的电消隙原理和差速耦合负反馈的同步控制方法,由控制器将控制量经数/模转换送入驱动器,以实现系统的消隙功能、同步补偿功能,提高转台驱动系统的精度和同步控制性能,并将其运用到雷达转台伺服系统中,结果证明了方法的可行性,能够提高所设计雷达转台双电机驱动系统的精确性。

基于双螺旋结构的声卡同步输入输出

为了提高在声卡应用中实现的录音、播放的同步性,采用回调函数里交叉调用录音、播放的操作,设计了一种新颖的回调递归逻辑链。该方法表现在录音、播放的两个时间线上,两条回调递归模式的逻辑循环构成了美妙的双螺旋结构,这个结构恰似生命科学里经典的基因双螺旋模型。双螺旋结构的录音播放程序机制有更好的中和抖动的结果,比常规的录音播放调度模式易于获得更优的同步效果。方法可应用于需要多路音频信号同步的场合,如声学回声消除、声源定位和有源降噪等领域,以便获得更优的同步,从而助力于对应的音频算法的效果。

双同步坐标系解耦滤波器复变量建模与分析

针对解耦双同步坐标系锁相环(DDSRF-PLL)传统实变量模型阶数较高、序分量响应不易观察、滤波性能评估困难等问题,提出了一种基于复变量的DDSRF-PLL建模方法。首先,建立了其复变量模型,分析了序分量响应特性,该复变量模型表明正序基波输出模型对负序基波分量实现负无穷大的衰减,同时可得到其他频率序分量的衰减增益;然后,基于提出的复变量模型,设计了二阶低通滤波器以显著增强解耦网络的滤波性能,并进一步分析了高阶低通滤波器的可行性与必要性。研究表明采用二阶低通滤波器即可满足大部分场景下的谐波抑制要求,且具有计算量小、模型阶数低、易于数字实现的优点。实验结果验证了所提复变量模型的正确性与有效性。