Coupling of the Calculated Freezing and Thawing Front Parameterization in the Earth System Model CAS-ESM

The soil freezing and thawing process affects soil physical properties,such as heat conductivity,heat capacity,and hydraulic conductivity in frozen ground regions,and further affects the processes of soil energy,hydrology,and carbon and nitrogen cycles.In this study,the calculation of freezing and thawing front parameterization was implemented into the earth system model of the Chinese Academy of Sciences(CAS-ESM)and its land component,the Common Land Model(CoLM),to investigate the dynamic change of freezing and thawing fronts and their effects.Our results showed that the developed models could reproduce the soil freezing and thawing process and the dynamic change of freezing and thawing fronts.The regionally averaged value of active layer thickness in the permafrost regions was 1.92 m,and the regionally averaged trend value was 0.35 cm yr–1.The regionally averaged value of maximum freezing depth in the seasonally frozen ground regions was 2.15 m,and the regionally averaged trend value was–0.48 cm yr–1.The active layer thickness increased while the maximum freezing depth decreased year by year.These results contribute to a better understanding of the freezing and thawing cycle process.

Investigating the effect of the Tibetan Plateau on the ITCZ using a coupled Earth system model

本文利用耦合地球气候系统模式研究了青藏高原对热带辐合带(ITCZ)的影响.我们研究发现热带大西洋ITCZ的位置对青藏高原存在与否有明显的敏感性.与目前真实情况相比,移除青藏高原会导致北半球海面降温,南半球海面升温.这种海面温度变化在大西洋表现得尤为明显,导致热带大西洋最大海温中心向南移动,从而迫使大气对流中心向南移动,即表现为ITCZ的南移.相应地,夏季热带大气Hadley环流的上升支也发生明显南移.北(南)半球海洋变冷(变暖)这种态势要求增强跨赤道向北的大气经向热量输送,从而维持各个半球的能量平衡,而这需要ITCZ位置的南移才能实现.本文研究表明,青藏高原的存在在现今ITCZ气候态的形成中可能扮演了重要角色.

Variation of Surface Temperature during the Last Millennium in a Simulation with the FGOALS-gl Climate System Model

A reasonable past millennial climate simulation relies heavily on the specified external forcings, including both natural and anthropogenic forcing agents. In this paper, we examine the surface temperature responses to specified external forcing agents in a millennium-scale transient climate simulation with the fast version of LASG IAP Flexible Global Ocean-Atmosphere-Land System model （FGOALS-gl） developed in the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of Atmospheric Physics （LASG/IAP）. The model presents a reasonable performance in comparison with reconstructions of surface temperature. Differentiated from significant changes in the 20th century at the global scale, changes during the natural-forcing-dominant period are mainly manifested in the Northern Hemisphere. Seasonally, modeled significant changes are more pronounced during the wintertime at higher latitudes. This may be a manifestation of polar amplification associated with sea-ice-temperature positive feedback. The climate responses to total external forcings can explain about half of the climate variance during the whole millennium period, especially at decadal timescales. Surface temperature in the Antarctic shows heterogeneous and insignificant changes during the preindustrial period and the climate response to external forcings is undetectable due to the strong internal variability. The model response to specified external forcings is modulated by cloud radiative forcing （CRF）. The CRF acts against the fluctuations of external forcings. Effects of clouds are manifested in shortwave radiation by changes in cloud water during the natural-forcing-dominant period, but mainly in longwave radiation by a decrease in cloud amount in the ant hropogenic- forcing-dominant period.

The El Ni?o-Southern Oscillation cycle simulated by the climate system model of Chinese Academy of Sciences

On the basis of more than 200-year control run, the performance of the climate system model of Chinese Academy of Sciences （CAS-ESM-C） in simulating the E1 Nifio-Southern Oscillation （ENSO） cycle is evalu- ated, including the onset, development and decay of the ENSO. It is shown that, the model can reasonably simulate the annual cycle and interannual variability of sea surface temperature （SST） in the tropical Pacif- ic, as well as the seasonal phase-locking of the ENSO. The model also captures two prerequisites for the E1 Nino onset, i.e., a westerly anomaly and a warm SST anomaly in the equatorial western Pacific. Owing to too strong forcing from an extratropical meridional wind, however, the westerly anomaly in this region is largely overestimated. Moreover, the simulated thermocline is much shallower with a weaker slope. As a result, the warm SST anomaly from the western Pacific propagates eastward more quickly, leading to a faster develop- ment of an E1 Nino. During the decay stage, owing to a stronger E1Nino in the model, the secondary Gill-type response of the tropical atmosphere to the eastern Pacific warming is much stronger, thereby resulting in a persistent easterly anomaly in the western Pacific. Meanwhile, a cold anomaly in the warm pool appears as a result of a lifted thermocline via Ekman pumping. Finally, an E1 Nino decays into a La Nina through their interactions. In addition, the shorter period and larger amplitude of the ENSO in the model can be attribut- ed to a shallower thermocline in the equatorial Pacific, which speeds up the zonal redistribution of a heat content in the upper ocean.

Major Modes of Short-Term Climate Variability in the Newly Developed NUIST Earth System Model(NESM)

A coupled earth system model（ESM） has been developed at the Nanjing University of Information Science and Technology（NUIST） by using version 5.3 of the European Centre Hamburg Model（ECHAM）, version 3.4 of the Nucleus for European Modelling of the Ocean（NEMO）, and version 4.1 of the Los Alamos sea ice model（CICE）. The model is referred to as NUIST ESM1（NESM1）. Comprehensive and quantitative metrics are used to assess the model＇s major modes of climate variability most relevant to subseasonal-to-interannual climate prediction. The model＇s assessment is placed in a multi-model framework. The model yields a realistic annual mean and annual cycle of equatorial SST, and a reasonably realistic precipitation climatology, but has difficulty in capturing the spring–fall asymmetry and monsoon precipitation domains. The ENSO mode is reproduced well with respect to its spatial structure, power spectrum, phase locking to the annual cycle, and spatial structures of the central Pacific（CP）-ENSO and eastern Pacific（EP）-ENSO; however, the equatorial SST variability,biennial component of ENSO, and the amplitude of CP-ENSO are overestimated. The model captures realistic intraseasonal variability patterns, the vertical-zonal structures of the first two leading predictable modes of Madden–Julian Oscillation（MJO）, and its eastward propagation; but the simulated MJO speed is significantly slower than observed. Compared with the T42 version, the high resolution version（T159） demonstrates improved simulation with respect to the climatology, interannual variance, monsoon–ENSO lead–lag correlation, spatial structures of the leading mode of the Asian–Australian monsoon rainfall variability, and the eastward propagation of the MJO.

The CMIP6 Historical Simulation Datasets Produced by the Climate System Model CAMS-CSM

This paper describes the historical simulations produced by the Chinese Academy of Meteorological Sciences(CAMS)climate system model(CAMS-CSM),which are contributing to phase 6 of the Coupled Model Intercomparison Project(CMIP6).The model description,experiment design and model outputs are presented.Three members’historical experiments are conducted by CAMS-CSM,with two members starting from different initial conditions,and one excluding the stratospheric aerosol to identify the effect of volcanic eruptions.The outputs of the historical experiments are also validated using observational data.It is found that the model can reproduce the climatological mean states and seasonal cycle of the major climate system quantities,including the surface air temperature,precipitation,and the equatorial thermocline.The long-term trend of air temperature and precipitation is also reasonably captured by CAMS-CSM.There are still some biases in the model that need further improvement.This paper can help the users to better understand the performance and the datasets of CAMS-CSM.

Earth System Model FGOALS-s2: Coupling a Dynamic Global Vegetation and Terrestrial Carbon Model with the Physical Climate System Model

Earth System Models （ESMs） are fundamental tools for understanding climate-carbon feedback. An ESM version of the Flexible Global Ocean-Atmosphere-Land System model （FGOALS） was recently developed within the IPCC AR5 Coupled Model Intercomparison Project Phase 5 （CMIP5） modeling framework, and we describe the development of this model through the coupling of a dynamic global vegetation and terrestrial carbon model with FGOALS-s2. The performance of the coupled model is evaluated as follows. The simulated global total terrestrial gross primary production （GPP） is 124.4 PgC yr-I and net pri- mary production （NPP） is 50.9 PgC yr-1. The entire terrestrial carbon pools contain about 2009.9 PgC, comprising 628.2 PgC and 1381.6 PgC in vegetation and soil pools, respectively. Spatially, in the tropics, the seasonal cycle of NPP and net ecosystem production （NEP） exhibits a dipole mode across the equator due to migration of the monsoon rainbelt, while the seasonal cycle is not so significant in Leaf Area Index （LAI）. In the subtropics, especially in the East Asian monsoon region, the seasonal cycle is obvious due to changes in temperature and precipitation from boreal winter to summer. Vegetation productivity in the northern mid-high latitudes is too low, possibly due to low soil moisture there. On the interannual timescale, the terrestrial ecosystem shows a strong response to ENSO. The model- simulated Nifio3.4 index and total terrestrial NEP are both characterized by a broad spectral peak in the range of 2-7 years. Further analysis indicates their correlation coefficient reaches -0.7 when NEP lags the Nifio3.4 index for about 1-2 months.

Global air-sea CO_(2) exchange fl ux since 1980s: results from CMIP6 Earth System Models

The ocean could profoundly modulate the ever-increasing atmospheric CO_(2) by air-sea CO_(2) exchange process,which is also able to cause signifi cant changes of physical and biogeochemical properties in return.In this study,we assessed the long-term average and spatial-temporal variability of global air-sea CO_(2) exchange fl ux(F CO_(2))since 1980s basing on the results of 18 Coupled Model Intercomparison Project Phase 6(CMIP6)Earth System Models(ESMs).Our fi ndings indicate that the CMIP6 ESMs simulated global CO_(2) sink in recent three decades ranges from 1.80 to 2.24 Pg C/a,which is coincidence with the results of cotemporaneous observations.What’s more,the CMIP6 ESMs consistently show that the global oceanic CO_(2) sink has gradually intensifi ed since 1980s as well as the observations.This study confi rms the simulated F CO_(2) could reach agreements with the observations in the aspect of primary climatological characteristics,however,the simulation skills of CIMP6 ESMs in diverse open-sea biomes are unevenness.None of the 18 CMIP6 ESMs could reproduce the observed F CO_(2) increasement in the central-eastern tropical Pacifi c and the midlatitude Southern Ocean.Defi ciencies of some CMIP6 ESMs in reproducing the atmospheric pressure systems of the Southern Hemisphere and the El Niño-Southern Oscillation(ENSO)mode of the tropical Pacifi c are probably the major causes.

Simulations of dissolved oxygen concentration in CMIP5 Earth system models

The climatologies of dissolved oxygen concentration in the ocean simulated by nine Earth system models(ESMs) from the historical emission driven experiment of CMIP5(Phase 5 of the Climate Model Intercomparison Project) are quantitatively evaluated by comparing the simulated oxygen to the WOA09 observation based on common statistical metrics. At the sea surface, distribution of dissolved oxygen is well simulated by all nine ESMs due to well-simulated sea surface temperature(SST), with both globally-averaged error and root mean square error(RMSE) close to zero, and both correlation coefficients and normalized standard deviation close to 1. However, the model performance differs from each other at the intermediate depth and deep ocean where important water masses exist. At the depth of 500 to 1 000 m where the oxygen minimum zones(OMZs) exist, all ESMs show a maximum of globally-averaged error and RMSE, and a minimum of the spatial correlation coefficient. In the ocean interior, the reason for model biases is complicated, and both the meridional overturning circulation(MOC) and the particulate organic carbon flux contribute to the biases of dissolved oxygen distribution. Analysis results show the physical bias contributes more. Simulation bias of important water masses such as North Atlantic Deep Water(NADW), Antarctic Bottom Water(AABW) and North Pacific Intermediate Water(NPIW) indicated by distributions of MOCs greatly affects the distributions of oxygen in north Atlantic, Southern Ocean and north Pacific, respectively.Although the model simulations of oxygen differ greatly from each other in the ocean interior, the multi-model mean shows a better agreement with the observation.

Unified Coordinate System Model for Performance Calculation of Fix-pad Journal Bearing with Different Pad Preload

Traditional model for calculating performance parameters of a fix-pad journal bearing leads to heavy workload, complicated and changeable formulae as it requires deriving various geometric formulae with different bearing types such as circular journal bearing, dislocated bearing and elliptic bearing. Considering different pad preload ratios for non-standard bearing, traditional model not only becomes more complicated but also reduces scalability and promotion of the calculation programs. For the complexly case of traditional model while dealing with various fix-pad journal bearings, unified coordinate system model for performance calculation of fix-pad journal bearing is presented in the paper. A unified coordinate system with the bearing center at the origin is established, and the eccentricity ratio and attitude angle of axis relative to each pad are calculated through the coordinates of journal center and each pad center. Geometric description of fix-pad journal bearing is unified in this model, which can be used for both various standard bearing and non-standard bearing with different pad preload ratios. Validity of this model is verified with an elliptical bearing. Performance of a non-standard four-leaf bearing with different pad preload ratios is calculated based on this model. The calculation result shows that increasing preload ratio of the pad 1 and keeping that of the left three pads constant improves bearing capacity, stiffness and damping coefficients. This research presents a unified coordinate system model unifies performance calculation of fix-pad journal bearings and studied a non-standard four-leaf bearing with different pad preload ratios, the research conclusions provides new methods for performance calculation of fix-pad journal bearings.

System modeling and dynamic analysis of ISG hybrid power shafting

A system model is established to analyze the dynamic performance of an integrated starter and generator （ISG） hybrid power shafting. The model couples the electromechanical coupling shaft dynamics, the bearing hydrodynamic lubrication and the engine block stiffness. The model is com- pared with the model based on ADAMS or the model neglecting the bearing hydrodynamics. The bearing eccentricity and the oil film pressure have been calculated under different hybrid conditions or at the different motor power levels. It＇ s found that the bearing hydrodynamics decreases the cal- culation results of the bearing peak load. Changes of the hybrid conditions or the motor power have no significant effect on the main bearing, but have impact on the motor bearing. A hybrid power sys- tem composed of a 1.6 L engine and a 45 kW ISG motor can operate safely.

Supply Chain Management System Model of Virtual Enterprises Based on Multi-Agent

Based on the analysis of a virtual enterprise and the development of supply chain management, their integration is proposed. Then, the difference between multi-agent system modeling method and the traditional modeling method is analyzed, and a method based on Java agent framework for multi-agent systems（ JAFMAS） is proposed. By using this method the virtual enterprise＇ s supply chain management system model is established.

A Three-Dimensional Case System Model for Programming Course

This research aims to construct a case resource library for programming course,which can be used for either teachers’teaching or students’learning.The cases cannot be simply piled up but rather require a systematic planning.The solution to this is to design a case system model.The outcome-based education(OBE)concept is adopted to guide the research,and a three-dimensional case system model matching the course objectives is designed.Under the guidance of the model,the case resource library construction is more planned.Cases based on the model can provide all-round support for the cultivation of students’ability by gradually promoting knowledge and technology,frequently exercising one’s abilities,as well as expanding diverse and innovative problems.

Introduction of CMIP5 Experiments Carried out with the Climate System Models of Beijing Climate Center

The climate system models from Beijing Climate Center, BCC_CSM1.1 and BCC_CSM1.1-M, are used to carry out most of the CMIP5 experiments. This study gives a general introduction of these two models, and provides main information on the experiments including the experiment purpose, design, and the external forcings. The transient climate responses to the CO2 concentration increase at 1% per year are presented in the simulation of the two models. The BCC_CSM1.1-M result is closer to the CMIP5 multiple models ensemble. The two models perform well in simulating the historical evolution of the surface air temperature, globally and averaged for China. Both models overestimate the global warming and underestimate the warming over China in the 20th century. With higher horizontal resolution, the BCC_CSM1.1-M has a better capability in reproducing the annual evolution of surface air temperature over China.

Global Climate Internal Variability in a 2000-year Control Simulation with Community Earth System Model(CESM)

Using the low-resolution(T31, equivalent to 3.75°× 3.75°) version of the Community Earth System Model(CESM) from the National Center for Atmospheric Research(NCAR), a global climate simulation was carried out with fixed external forcing factors(1850 Common Era.(C.E.) conditions) for the past 2000 years. Based on the simulated results, spatio-temporal structures of surface air temperature, precipitation and internal variability, such as the El Nio-Southern Oscillation(ENSO), the Atlantic Multi-decadal Oscillation(AMO), the Pacific Decadal Oscillation(PDO), and the North Atlantic Oscillation(NAO), were compared with reanalysis datasets to evaluate the model performance. The results are as follows: 1) CESM showed a good performance in the long-term simulation and no significant climate drift over the past 2000 years; 2) climatological patterns of global and regional climate changes simulated by the CESM were reasonable compared with the reanalysis datasets; and 3) the CESM simulated internal natural variability of the climate system performs very well. The model not only reproduced the periodicity of ENSO, AMO and PDO events but also the 3–8 years variability of the ENSO. The spatial distribution of the CESM-simulated NAO was also similar to the observed. However, because of weaker total irradiation and greenhouse gas concentration forcing in the simulation than the present, the model performances had some differences from the observations. Generally, the CESM showed a good performance in simulating the global climate and internal natural variability of the climate system. This paves the way for other forced climate simulations for the past 2000 years by using the CESM.

The FGOALS climate system model as a modeling tool for supporting climate sciences:An overview

Climate system models are useful tools for understanding the interactions among the components of the climate system and predicting/projecting future climate change. The development of climate models has been a central focus of the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of Atmospheric Physics, Chinese Academy of Sciences(LASG/IAP) since the establishment of the laboratory in 1985. In China, many pioneering component models and fully coupled models of the climate system have been developed by LASG/IAP. The fully coupled climate system developed in the recent decade is named FGOALS(Flexible Global Ocean-Atmosphere-Land System Model). In this paper, an application-oriented review of the LASG/IAP FGOALS model is presented. The improved model performances are demonstrated in the context of cloud-radiation processes, Asian monsoon, ENSO phenomena, Atlantic Meridional Overturning Circulation(AMOC) and sea ice. The FGOALS model has contributed to both CMIP5(Coupled Model Intercomparison Project-phase 5) and IPCC(Intergovernmental Panel on Climate Change) AR5(the Fifth Assessment Report). The release of FGOALS data has supported the publication of nearly 500 papers around the world. The results of FGOALS are cited ~106 times in the IPCC WG1(Working Group 1) AR5. In addition to the traditional long-term simulations and projections, near-term decadal climate prediction is a new set of CMIP experiment, progress of LAGS/IAP in the development of nearterm decadal prediction system is reviewed. The FGOALS model has supported many Chinese national-level research projects and contributed to the national climate change assessment report. The crucial role of FGOALS as a modeling tool for supporting climate sciences is highlighted by demonstrating the model's performances in the simulation of the evolution of Earth's climate from the past to the future.

Regional earth system modeling：review and future directions

耦合区域地球系统模式(RESM)现在仍处于早期的发展阶段,在本文中,我们对其近期相关进展进行了回顾。到目前为止,已经开发出了耦合的区域大气–海洋–海冰、大气–气溶胶和大气–生物圈模式,但总体它们仅在有限的区域得到应用,需要更多的工作来评估其在更多区域的可移植性。我们认为RESM发展中的未来挑战,是在大气、海洋、冰冻圈、生物圈、化学圈以外,同时将人类及其活动成分以完全相互作用的方式引入进来。

Climate variability and predictability associated with the Indo-Pacific Oceanic Channel Dynamics in the CCSM4 Coupled System Model

An experiment using the Community Climate System Model(CCSM4), a participant of the Coupled Model Intercomparison Project phase-5(CMIP5), is analyzed to assess the skills of this model in simulating and predicting the climate variabilities associated with the oceanic channel dynamics across the Indo-Pacific Oceans. The results of these analyses suggest that the model is able to reproduce the observed lag correlation between the oceanic anomalies in the southeastern tropical Indian Ocean and those in the cold tongue in the eastern equatorial Pacific Ocean at a time lag of 1 year. This success may be largely attributed to the successful simulation of the interannual variations of the Indonesian Throughflow, which carries the anomalies of the Indian Ocean Dipole(IOD) into the western equatorial Pacific Ocean to produce subsurface temperature anomalies, which in turn propagate to the eastern equatorial Pacific to generate ENSO. This connection is termed the "oceanic channel dynamics" and is shown to be consistent with the observational analyses. However, the model simulates a weaker connection between the IOD and the interannual variability of the Indonesian Throughflow transport than found in the observations. In addition, the model overestimates the westerly wind anomalies in the western-central equatorial Pacific in the year following the IOD, which forces unrealistic upwelling Rossby waves in the western equatorial Pacific and downwelling Kelvin waves in the east. This assessment suggests that the CCSM4 coupled climate system has underestimated the oceanic channel dynamics and overestimated the atmospheric bridge processes.

Support Vector Machine-Based Nonlinear System Modeling and Control

This paper provides an introduction to a support vector machine, a new kernel-based technique introduced in statistical learning theory and structural risk minimization, then presents a modeling-control framework based on SVM. At last a numerical experiment is taken to demonstrate the proposed approach's correctness and effectiveness.

DC System Modeling and AC/DC System Harmonic Calculation under Asymmetric Faults

The accurate DC system model is the key to fault analysis and harmonic calculation of AC/DC system. In this paper, a frequency domain analysis model of DC system is established, and based on it a unified fundamental frequency and harmonic iterative calculation method is proposed. The DC system model is derived considering the dynamic switching characteristic of converter and the steady-state response features of dc control system synchronously. And the proposed harmonic calculation method fully considers the AC/DC harmonic interaction and fault interaction under AC asymmetric fault condition. The method is used to the harmonic analysis and calculation of CIGRE HVDC system. Compared with those obtained by simulation using PSCAD/EMTDC software, the results show that the proposed model and method are accurate and effective, and provides the analysis basis of harmonic suppression, filter configuration and protection analysis in AC/DC system.