In this paper, first introduce and define an intuitionistic Menger inner product space, and then, obtain a new fixed point theorem in a complete intuitionistic Menger inner product space. As an application, the result...In this paper, first introduce and define an intuitionistic Menger inner product space, and then, obtain a new fixed point theorem in a complete intuitionistic Menger inner product space. As an application, the results are used to study the existence and uniqueness of the solution to a linear Volterra integral equation.展开更多
In this note, some conditions of composition operators on DT spaces to be bounded are given by means of Carleson measures and pointwise multipliers, for some ranges of T. The authors prove that (i) Let 1 < T n + 2...In this note, some conditions of composition operators on DT spaces to be bounded are given by means of Carleson measures and pointwise multipliers, for some ranges of T. The authors prove that (i) Let 1 < T n + 2 and 2k < T 2k + 1 (or 2k - 1 < T 2k) for some positive integer k. Suppose = ( 1,… , n) be a univalent mapping from B into itself, denote dμj(l) (z) = R(l) j (z) 2(k-l+2) (1 - z 2)2k-t+1dv(z) for l= 1, 2,… , k + 1. If μj(l)-1 are (T - 2k + 2l-4)-Carleson measures for all l, then the composition operator C on DT is bounded; (ii) Let 1 < T n + 2, = ( 1,… , n) be univalent and the Frechet derivative of -1 be bounded on (B). If R j ∈ M(DT-2) for all j, then the composition operator C on DT is bounded; (iii) Let T > n + 2 and as in (ii). If j ∈ DT for all j, then the composition operator C on DT is bounded.展开更多
In this paper,we obtain some new fixed point theorems in fuzzy-Banach spaces by considering the t-norms of h-type and a linear mapping of weakly demicompact.
Objective Io evaluate changes in morphology of the cesarean scar and uterus between one and two years after cesarean section using high-resolution,three dimensional T2-weighted sampling perfection with application opt...Objective Io evaluate changes in morphology of the cesarean scar and uterus between one and two years after cesarean section using high-resolution,three dimensional T2-weighted sampling perfection with application optimized contrast using diflerent flip angle evolutions Magnetic Resonance Imaging(3DT2w SPACE MRI).Methods This prospective study was performed to investigate morphological changes in the cesarean scars and uterus from one to two years after cesarean section using high-resolution,3D T2w SPACE MRI.The healthy volunteers having no childbearing history were recruited as the controls.All data were measured by two experienced radiologists.All data with normal distribution between the one-year and two-year groups were compared using a paired-sample t test or independent t test.Results Finally,46 women took a pelvic MR examination one year after cesarean section,and a subset of 15 completed the same examination again after two years of cesarean section.Both the uterine length and the anterior wall thickness after two years of cesarean section(5.75±0.46 and 1.45±0.35 cm)were significantly greater than those measured at one year(5.33±0.59 and 1.25±0.27 cm)(t=-2.363 and-2.175,P=0.033 and 0.048).No significant difference was shown in myometrial thickness two years after cesarean section(1.45±0.35 cm)with respect to the control group(1.58±0.21 cm,P=0.170).Nine women who underwent MRI twice were considered to have scar diverticula one year after cesarean section,and still had diverticula two years after cesarean section.The thickness,height,and width of the uterine scar showed no significant change from one to two years(all P>0.05).Conclusions 3D T2w SPACE MRI provides overall morphologic details and shows dynamic changes in the scar and the uterus between one and two years after cesarean section.Scar morphology after cesarean section reached relatively stable one year after cesarean section,and uterine morphology was closer to normal two years after cesarean section.展开更多
This paper investigates Buck＇s question about which class of spaces is strongly monotonically T2,and if other properties are combined with strongly monotonically T2,which class of spaces could be got. Based on having...This paper investigates Buck＇s question about which class of spaces is strongly monotonically T2,and if other properties are combined with strongly monotonically T2,which class of spaces could be got. Based on having a cushioned pair-base space and compact strongly monotonically T2 space,some results （Theorems 1--3） are obtained.展开更多
In this paper,generalized the ideas of theory of distributions,defined locally convex space depend on operator T,given a new method to change the study of a unbounded operator to a bounded operator, and proved the nor...In this paper,generalized the ideas of theory of distributions,defined locally convex space depend on operator T,given a new method to change the study of a unbounded operator to a bounded operator, and proved the normal solvability of operator polynomial P (T) on FM space that depend on operator T.展开更多
The purpose of this paper is to introduce the coneept of (Φ,△)-type probabilistic contractor in Menger PN-spaces and to study the existence and uniqueness of solutions for the nonlinear operator equations with such ...The purpose of this paper is to introduce the coneept of (Φ,△)-type probabilistic contractor in Menger PN-spaces and to study the existence and uniqueness of solutions for the nonlinear operator equations with such probabilistic contractor in Menger PN-spaces.The results presented in this paper improve and extend the corresponding results in [1] and [4-8].展开更多
In Newton’s classical physics, space and time are treated as absolute, independent quantities and can be discussed separately. In Special Relativity, Einstein proved that space and time are relative and dependent and...In Newton’s classical physics, space and time are treated as absolute, independent quantities and can be discussed separately. In Special Relativity, Einstein proved that space and time are relative and dependent and therefore must not be treated separately. Minkowski adopted four-dimensional space-time frames (4-d s-t frames), which indirectly revealed the dependency of space and time with the addition of a constraint for an event interval. We are not able to visualize 4-d s-t frames. Since space and time are inseparable, three-dimensional space-time frames (3-d s-t frames) can be constructed by embedding time into space to directly show the interdependency of space and time. Time contraction and length contraction can also be depicted graphically using 3-d s-t frames. We have much better understanding reality of space and time in 3-d s-t frames. This will lead to Contextual Reality for better understanding the universe.展开更多
In the present paper, we show that there exists a unique common fixed point for four self maps in a fuzzy metric space where two of the maps are reciprocally continuous and the other two maps are z-asymptotically comm...In the present paper, we show that there exists a unique common fixed point for four self maps in a fuzzy metric space where two of the maps are reciprocally continuous and the other two maps are z-asymptotically commuting.展开更多
This research work proceeds from the assumption, which was still considered by Einstein, that the quantization of gravity does not require additional external procedures: quantum phenomena can be a consequence of the ...This research work proceeds from the assumption, which was still considered by Einstein, that the quantization of gravity does not require additional external procedures: quantum phenomena can be a consequence of the properties of the universal gravitational interaction, which maps any physical field upon the space-time geometry. Therefore, an attempt is made in this research work to reduce the quantization of physical fields in GRT to the space-time quantization. Three reasons for quantum phenomena are considered: Partition of space-time into a set of unconnected Novikov’s R- and T-domains impenetrable for light paths;the set is generated by the invariance of Einstein’s equations with respect to dual mappings;The existence of electric charge quanta of wormholes, which geometrically describe elementary particles in GRT. This gives rise to a discrete spectrum of their physical and geometric parameters governed by Diophantine equations. It is shown that the fundamental constants (electric charge, rest masses of an electron and a proton) are interconnected arithmetically;The existence of the so-called Diophantine catastrophe, when fluctuations in the values of physical constants tending to zero lead to fluctuations in the number of electric charges and the number of nucleons at the wormhole throats, which tend to infinity, so that the product of the increments of these numbers by the increment of physical constants forms a relation equivalent to the uncertainty relation in quantum mechanics. This suggests that space-time cannot but fluctuate, and, moreover, its fluctuations are bounded from below, so that all processes become chaotic, and the observables become averaged over this chaos.展开更多
In this paper, we proved some fixed point theorems in intuitionistic fuzzy metric spaces applying the properties of weakly compatible mapping and satisfying the concept of implicit relations for t norms and t connorms.
Tool path generated by space-filling curve always turns frequently causing trembling to machine,reducing toollife and affecting workpiece quality. Length and generation time of tool paths are both relatively long. In ...Tool path generated by space-filling curve always turns frequently causing trembling to machine,reducing toollife and affecting workpiece quality. Length and generation time of tool paths are both relatively long. In order to solve these problems,a toolpath generation method of NC milling based on space-filling curve is proposed. First,T-spline surface is regarded as the modeling surface,the grid,which is based on the limited scallop-height,can be got in the parameter space,and the influence value of grid node is determined. Second,a box is defined and planned,and the tool paths are got preliminarily,which is based on minimal spanning tree; Finally,based on an improved chamfering algorithm,the whole tool paths are got. A simulation system is developed for computer simulation,and an experiment is carried out to verify the method. The results of simulation and experiment show that the method is effective and feasible,and length and time of the tool paths are reduced.展开更多
基金Project supported by the Natural Science Foundation of Yibin University (No. 2009Z01)
文摘In this paper, first introduce and define an intuitionistic Menger inner product space, and then, obtain a new fixed point theorem in a complete intuitionistic Menger inner product space. As an application, the results are used to study the existence and uniqueness of the solution to a linear Volterra integral equation.
基金the Natural Science Foundation of Guangdong Province.
文摘In this note, some conditions of composition operators on DT spaces to be bounded are given by means of Carleson measures and pointwise multipliers, for some ranges of T. The authors prove that (i) Let 1 < T n + 2 and 2k < T 2k + 1 (or 2k - 1 < T 2k) for some positive integer k. Suppose = ( 1,… , n) be a univalent mapping from B into itself, denote dμj(l) (z) = R(l) j (z) 2(k-l+2) (1 - z 2)2k-t+1dv(z) for l= 1, 2,… , k + 1. If μj(l)-1 are (T - 2k + 2l-4)-Carleson measures for all l, then the composition operator C on DT is bounded; (ii) Let 1 < T n + 2, = ( 1,… , n) be univalent and the Frechet derivative of -1 be bounded on (B). If R j ∈ M(DT-2) for all j, then the composition operator C on DT is bounded; (iii) Let T > n + 2 and as in (ii). If j ∈ DT for all j, then the composition operator C on DT is bounded.
文摘In this paper,we obtain some new fixed point theorems in fuzzy-Banach spaces by considering the t-norms of h-type and a linear mapping of weakly demicompact.
文摘Objective Io evaluate changes in morphology of the cesarean scar and uterus between one and two years after cesarean section using high-resolution,three dimensional T2-weighted sampling perfection with application optimized contrast using diflerent flip angle evolutions Magnetic Resonance Imaging(3DT2w SPACE MRI).Methods This prospective study was performed to investigate morphological changes in the cesarean scars and uterus from one to two years after cesarean section using high-resolution,3D T2w SPACE MRI.The healthy volunteers having no childbearing history were recruited as the controls.All data were measured by two experienced radiologists.All data with normal distribution between the one-year and two-year groups were compared using a paired-sample t test or independent t test.Results Finally,46 women took a pelvic MR examination one year after cesarean section,and a subset of 15 completed the same examination again after two years of cesarean section.Both the uterine length and the anterior wall thickness after two years of cesarean section(5.75±0.46 and 1.45±0.35 cm)were significantly greater than those measured at one year(5.33±0.59 and 1.25±0.27 cm)(t=-2.363 and-2.175,P=0.033 and 0.048).No significant difference was shown in myometrial thickness two years after cesarean section(1.45±0.35 cm)with respect to the control group(1.58±0.21 cm,P=0.170).Nine women who underwent MRI twice were considered to have scar diverticula one year after cesarean section,and still had diverticula two years after cesarean section.The thickness,height,and width of the uterine scar showed no significant change from one to two years(all P>0.05).Conclusions 3D T2w SPACE MRI provides overall morphologic details and shows dynamic changes in the scar and the uterus between one and two years after cesarean section.Scar morphology after cesarean section reached relatively stable one year after cesarean section,and uterine morphology was closer to normal two years after cesarean section.
文摘This paper investigates Buck＇s question about which class of spaces is strongly monotonically T2,and if other properties are combined with strongly monotonically T2,which class of spaces could be got. Based on having a cushioned pair-base space and compact strongly monotonically T2 space,some results （Theorems 1--3） are obtained.
文摘In this paper,generalized the ideas of theory of distributions,defined locally convex space depend on operator T,given a new method to change the study of a unbounded operator to a bounded operator, and proved the normal solvability of operator polynomial P (T) on FM space that depend on operator T.
文摘The purpose of this paper is to introduce the coneept of (Φ,△)-type probabilistic contractor in Menger PN-spaces and to study the existence and uniqueness of solutions for the nonlinear operator equations with such probabilistic contractor in Menger PN-spaces.The results presented in this paper improve and extend the corresponding results in [1] and [4-8].
文摘In Newton’s classical physics, space and time are treated as absolute, independent quantities and can be discussed separately. In Special Relativity, Einstein proved that space and time are relative and dependent and therefore must not be treated separately. Minkowski adopted four-dimensional space-time frames (4-d s-t frames), which indirectly revealed the dependency of space and time with the addition of a constraint for an event interval. We are not able to visualize 4-d s-t frames. Since space and time are inseparable, three-dimensional space-time frames (3-d s-t frames) can be constructed by embedding time into space to directly show the interdependency of space and time. Time contraction and length contraction can also be depicted graphically using 3-d s-t frames. We have much better understanding reality of space and time in 3-d s-t frames. This will lead to Contextual Reality for better understanding the universe.
文摘In the present paper, we show that there exists a unique common fixed point for four self maps in a fuzzy metric space where two of the maps are reciprocally continuous and the other two maps are z-asymptotically commuting.
文摘This research work proceeds from the assumption, which was still considered by Einstein, that the quantization of gravity does not require additional external procedures: quantum phenomena can be a consequence of the properties of the universal gravitational interaction, which maps any physical field upon the space-time geometry. Therefore, an attempt is made in this research work to reduce the quantization of physical fields in GRT to the space-time quantization. Three reasons for quantum phenomena are considered: Partition of space-time into a set of unconnected Novikov’s R- and T-domains impenetrable for light paths;the set is generated by the invariance of Einstein’s equations with respect to dual mappings;The existence of electric charge quanta of wormholes, which geometrically describe elementary particles in GRT. This gives rise to a discrete spectrum of their physical and geometric parameters governed by Diophantine equations. It is shown that the fundamental constants (electric charge, rest masses of an electron and a proton) are interconnected arithmetically;The existence of the so-called Diophantine catastrophe, when fluctuations in the values of physical constants tending to zero lead to fluctuations in the number of electric charges and the number of nucleons at the wormhole throats, which tend to infinity, so that the product of the increments of these numbers by the increment of physical constants forms a relation equivalent to the uncertainty relation in quantum mechanics. This suggests that space-time cannot but fluctuate, and, moreover, its fluctuations are bounded from below, so that all processes become chaotic, and the observables become averaged over this chaos.
文摘In this paper, we proved some fixed point theorems in intuitionistic fuzzy metric spaces applying the properties of weakly compatible mapping and satisfying the concept of implicit relations for t norms and t connorms.
基金Supported by the National Natural Science Foundation of China(No.51575143)
文摘Tool path generated by space-filling curve always turns frequently causing trembling to machine,reducing toollife and affecting workpiece quality. Length and generation time of tool paths are both relatively long. In order to solve these problems,a toolpath generation method of NC milling based on space-filling curve is proposed. First,T-spline surface is regarded as the modeling surface,the grid,which is based on the limited scallop-height,can be got in the parameter space,and the influence value of grid node is determined. Second,a box is defined and planned,and the tool paths are got preliminarily,which is based on minimal spanning tree; Finally,based on an improved chamfering algorithm,the whole tool paths are got. A simulation system is developed for computer simulation,and an experiment is carried out to verify the method. The results of simulation and experiment show that the method is effective and feasible,and length and time of the tool paths are reduced.
