To better understand the effects of plastic film mulching on soil greenhouse gases（GHGs） emissions,we compared seasonal and vertical variations of GHG concentrations at seven soil depths in maize（Zea mays L.） fiel...To better understand the effects of plastic film mulching on soil greenhouse gases（GHGs） emissions,we compared seasonal and vertical variations of GHG concentrations at seven soil depths in maize（Zea mays L.） fields at Changwu station in Shaanxi,a semi-humid region,between 2012 and 2013.Gas samples were taken simultaneously every one week from non-mulched（BP） and plastic film-mulched（FM） field plots.The results showed that the concentration of GHGs varied distinctly at the soil-atmosphere interface and in the soil profile during the maize growing season（MS）.Both carbon dioxide（CO_2） and nitrous oxide（N_2O） concentrations increased with increasement of soil depth,while the methane（CH_4）concentrations decreased with increasement of soil depth.A strong seasonal variation pattern was found for CO_2 and N_2O concentrations,as compared to an inconspicuous seasonal variation of CH_4 concentrations.The mean CO_2 and N_2O concentrations were higher,but the mean CH_4 concentration in the soil profiles was lower in the FM plots than in the BP plots.The results of this study suggested that plastic film mulching significantly increased the potential emissions of CO_2and N_2O from the soil,and promoted CH_4 absorption by the soil,particularly during the MS.展开更多
In alloy bar rolling process, the component of alloyed steel influenced the spread coefficient greatly, therefore, the component influence coefficient m of different alloyed steel has been determined firstly to calcul...In alloy bar rolling process, the component of alloyed steel influenced the spread coefficient greatly, therefore, the component influence coefficient m of different alloyed steel has been determined firstly to calculate the maximum spread. Then the curvature radius of stress free surface and the ＂critical point on the contact boundary＂ have been solved, the surface profile of outgoing workpiece has been obtained. Furthermore, the formula of the equivalent contact section area has been proposed and the mean roll radius has been calculated. The bar rolling experiment and the rigid-plastic FEM （finite element method） simulation have been carried out to verify the novel approach. Compared with experimental data and simulation results, the novel approach can be used in setting processing parameter and design of finishing groove.展开更多
A Fe/Al clad tube was prepared by explosive welding.Then the bonding characteristic of the interface was investigated by compression,flattening and compression-shear test.The test results exhibit that the clad tubes p...A Fe/Al clad tube was prepared by explosive welding.Then the bonding characteristic of the interface was investigated by compression,flattening and compression-shear test.The test results exhibit that the clad tubes possessing good bonding interface have higher shear strength than that of pure aluminum and can bear both axial and radial deformation.The original interface between aluminum layer and ferrite layer was observed by scanning electron microscopy（SEM）.The results show that the clad tubes with good bonding properties possess the interface in wave and straight shape.The Fe/Al clad tube was used to manufacture the T-shape by hydro-bulging.It is found that the good-bonding interface of the Fe/Al clad tube plays a dominant role in the formation of the T-shape.展开更多
基金financially supported by the National Natural Science Foundation of China(31270553,51279197,41401343)the Special Fund for Agricultural Profession, China(201103003)
文摘To better understand the effects of plastic film mulching on soil greenhouse gases（GHGs） emissions,we compared seasonal and vertical variations of GHG concentrations at seven soil depths in maize（Zea mays L.） fields at Changwu station in Shaanxi,a semi-humid region,between 2012 and 2013.Gas samples were taken simultaneously every one week from non-mulched（BP） and plastic film-mulched（FM） field plots.The results showed that the concentration of GHGs varied distinctly at the soil-atmosphere interface and in the soil profile during the maize growing season（MS）.Both carbon dioxide（CO_2） and nitrous oxide（N_2O） concentrations increased with increasement of soil depth,while the methane（CH_4）concentrations decreased with increasement of soil depth.A strong seasonal variation pattern was found for CO_2 and N_2O concentrations,as compared to an inconspicuous seasonal variation of CH_4 concentrations.The mean CO_2 and N_2O concentrations were higher,but the mean CH_4 concentration in the soil profiles was lower in the FM plots than in the BP plots.The results of this study suggested that plastic film mulching significantly increased the potential emissions of CO_2and N_2O from the soil,and promoted CH_4 absorption by the soil,particularly during the MS.
文摘In alloy bar rolling process, the component of alloyed steel influenced the spread coefficient greatly, therefore, the component influence coefficient m of different alloyed steel has been determined firstly to calculate the maximum spread. Then the curvature radius of stress free surface and the ＂critical point on the contact boundary＂ have been solved, the surface profile of outgoing workpiece has been obtained. Furthermore, the formula of the equivalent contact section area has been proposed and the mean roll radius has been calculated. The bar rolling experiment and the rigid-plastic FEM （finite element method） simulation have been carried out to verify the novel approach. Compared with experimental data and simulation results, the novel approach can be used in setting processing parameter and design of finishing groove.
基金Project(BA2006067)supported by Achievement Transitional Foundation of Jiangsu Province,China
文摘A Fe/Al clad tube was prepared by explosive welding.Then the bonding characteristic of the interface was investigated by compression,flattening and compression-shear test.The test results exhibit that the clad tubes possessing good bonding interface have higher shear strength than that of pure aluminum and can bear both axial and radial deformation.The original interface between aluminum layer and ferrite layer was observed by scanning electron microscopy（SEM）.The results show that the clad tubes with good bonding properties possess the interface in wave and straight shape.The Fe/Al clad tube was used to manufacture the T-shape by hydro-bulging.It is found that the good-bonding interface of the Fe/Al clad tube plays a dominant role in the formation of the T-shape.
