The effects of cavity dimensions on the resonance frequency and resonance strength of the TE01δmode in split postdielectric resonator (SPDR) technique are investigated by using full-wave simulations. The results of s...The effects of cavity dimensions on the resonance frequency and resonance strength of the TE01δmode in split postdielectric resonator (SPDR) technique are investigated by using full-wave simulations. The results of simulations provide guidance for adjusting the dimensional parameters of the set-up to ensure that a strong TE01δ resonance mode is excited. The scaled designs of SPDR fixtures for operation at frequencies that are most important for applications are presented. These designs employ two sets of dielectric resonators (DRs) that can be fabricated from the standard ceramic materials. In addition, it is demonstrated that the resonance frequency of the TE01δ mode in the fixture can be tuned by adjusting the gap of the split DR.展开更多
Two-mode converters at 1.3μm, aiming at applications in mode-division multiplexing in Ethernet systems, are proposed and experimentally demonstrated. Based on multimode interference couplers, the two-mode converters ...Two-mode converters at 1.3μm, aiming at applications in mode-division multiplexing in Ethernet systems, are proposed and experimentally demonstrated. Based on multimode interference couplers, the two-mode converters with 50% and 66% mode conversion efficiencies are designed and fabricated on InP substrates. AIode conver- sion from the fundamental mode （TEo） to the first order mode （TE1） is successfully demonstrated within the wavelength range of 1280-1320nm. The 1.3-μm mode converters should be important devices in mode-division multiplexing systems in Ethernet systems.展开更多
A novel structure design of micro optic electro mechanical system（MOEMS）gyroscope is presented in this paper.The structure combining surface acoustic wave（SAW）sensor,optical waveguide diffractive component,electro...A novel structure design of micro optic electro mechanical system（MOEMS）gyroscope is presented in this paper.The structure combining surface acoustic wave（SAW）sensor,optical waveguide diffractive component,electro-optical modulator etc.is integrated on a LiNbO3 substrate as the gyroscope for sensing rotating angular velocity,and an optical readout device is added on the traditional SAW typed TE-TM mode converter as the detecting device.The principles of the MOEMS are discussed in the paper,and simulation result shows that there would be apparent advantages of higher precision and stronger anti-vibration capacity.展开更多
We present the СATEС software, which implements the solution to the problems of computational acoustics. The software is based on the use of the superelement method and finite element modeling algorithms, in-cluding...We present the СATEС software, which implements the solution to the problems of computational acoustics. The software is based on the use of the superelement method and finite element modeling algorithms, in-cluding hydrodynamic noise. The paper presents the main possibilities of software for solving acoustic design problems. .展开更多
文摘The effects of cavity dimensions on the resonance frequency and resonance strength of the TE01δmode in split postdielectric resonator (SPDR) technique are investigated by using full-wave simulations. The results of simulations provide guidance for adjusting the dimensional parameters of the set-up to ensure that a strong TE01δ resonance mode is excited. The scaled designs of SPDR fixtures for operation at frequencies that are most important for applications are presented. These designs employ two sets of dielectric resonators (DRs) that can be fabricated from the standard ceramic materials. In addition, it is demonstrated that the resonance frequency of the TE01δ mode in the fixture can be tuned by adjusting the gap of the split DR.
基金Supported by the National Basic Research Program of China under Grant No 2014CB340102the National Natural Science Foundation of China under Grant Nos 61474111 and 61274046
文摘Two-mode converters at 1.3μm, aiming at applications in mode-division multiplexing in Ethernet systems, are proposed and experimentally demonstrated. Based on multimode interference couplers, the two-mode converters with 50% and 66% mode conversion efficiencies are designed and fabricated on InP substrates. AIode conver- sion from the fundamental mode （TEo） to the first order mode （TE1） is successfully demonstrated within the wavelength range of 1280-1320nm. The 1.3-μm mode converters should be important devices in mode-division multiplexing systems in Ethernet systems.
基金Sponsored by Postgraduate Science and Technology Innovation Fund of BIT(Rank A)
文摘A novel structure design of micro optic electro mechanical system（MOEMS）gyroscope is presented in this paper.The structure combining surface acoustic wave（SAW）sensor,optical waveguide diffractive component,electro-optical modulator etc.is integrated on a LiNbO3 substrate as the gyroscope for sensing rotating angular velocity,and an optical readout device is added on the traditional SAW typed TE-TM mode converter as the detecting device.The principles of the MOEMS are discussed in the paper,and simulation result shows that there would be apparent advantages of higher precision and stronger anti-vibration capacity.
文摘We present the СATEС software, which implements the solution to the problems of computational acoustics. The software is based on the use of the superelement method and finite element modeling algorithms, in-cluding hydrodynamic noise. The paper presents the main possibilities of software for solving acoustic design problems. .
