Effect of Cavity Dimensions on TE_01δMode Resonance in Split-Post Dielectric Resonator Techniques

The effects of cavity dimensions on the resonance frequency and resonance strength of the TE01δmode in split postdielectric resonator (SPDR) technique are investigated by using full-wave simulations. The results of simulations provide guidance for adjusting the dimensional parameters of the set-up to ensure that a strong TE01δ resonance mode is excited. The scaled designs of SPDR fixtures for operation at frequencies that are most important for applications are presented. These designs employ two sets of dielectric resonators (DRs) that can be fabricated from the standard ceramic materials. In addition, it is demonstrated that the resonance frequency of the TE01δ mode in the fixture can be tuned by adjusting the gap of the split DR.

TE模介质谐振滤波器的设计

研究TD-LTE频段微波介质腔体滤波器的快速设计与调试.为了验证此方法在工程应用领域具有普适性与实用性,利用高频结构仿真软件(HFSS)仿真调试一款8阶准椭圆函数带通滤波器,实现中心频率f0=2 600 MHz,带宽(BW)为40 MHz,插入损耗≤0.5 d B,驻波比≤1.35,带外30 MHz处的抑制≥60 d B.仿真结果达到滤波器商用化的要求,该方法在滤波器设计中具有很大的工程应用价值,可为其他设计者提供参考.

闭腔谐振法测试微波介质陶瓷介电参数

研究用闭腔谐振法测量微波介质陶瓷介电参数的方法 ,采用TE0 1 δ模 ,开波导法研究了闭腔谐振器的谐振频率和导体的表面损耗 ,并由此计算了材料的微波介电常数、微波介电损耗 ,研究了谐振频率、介电损耗随体系结构参数的变化 .研究证明开波导法的采用和此计算模型对体系谐振频率的计算误差小于 5 % .低损耗介质基片的采用不但可降低体系的谐振频率 ,还可有效提高金属板的品质因子 。