Transition metal phosphides(TMPs)have been regarded as alternative hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)catalysts owing to their comparable activity to those of noble metal-based catalysts...Transition metal phosphides(TMPs)have been regarded as alternative hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)catalysts owing to their comparable activity to those of noble metal-based catalysts.TMPs have been produced in various morphologies,including hollow and porous nanostructures,which are features deemed desirable for electrocatalytic materials.Templated synthesis routes are often responsible for such morphologies.This paper reviews the latest advances and existing challenges in the synthesis of TMP-based OER and HER catalysts through templated methods.A comprehensive review of the structure-property-performance of TMP-based HER and OER catalysts prepared using different templates is presented.The discussion proceeds according to application,first by HER and further divided among the types of templates used-from hard templates,sacrificial templates,and soft templates to the emerging dynamic hydrogen bubble template.OER catalysts are then reviewed and grouped according to their morphology.Finally,prospective research directions for the synthesis of hollow and porous TMP-based catalysts,such as improvements on both activity and stability of TMPs,design of environmentally benign templates and processes,and analysis of the reaction mechanism through advanced material characterization techniques and theoretical calculations,are suggested.展开更多
Road traffic monitoring is an imperative topic widely discussed among researchers.Systems used to monitor traffic frequently rely on cameras mounted on bridges or roadsides.However,aerial images provide the flexibilit...Road traffic monitoring is an imperative topic widely discussed among researchers.Systems used to monitor traffic frequently rely on cameras mounted on bridges or roadsides.However,aerial images provide the flexibility to use mobile platforms to detect the location and motion of the vehicle over a larger area.To this end,different models have shown the ability to recognize and track vehicles.However,these methods are not mature enough to produce accurate results in complex road scenes.Therefore,this paper presents an algorithm that combines state-of-the-art techniques for identifying and tracking vehicles in conjunction with image bursts.The extracted frames were converted to grayscale,followed by the application of a georeferencing algorithm to embed coordinate information into the images.The masking technique eliminated irrelevant data and reduced the computational cost of the overall monitoring system.Next,Sobel edge detection combined with Canny edge detection and Hough line transform has been applied for noise reduction.After preprocessing,the blob detection algorithm helped detect the vehicles.Vehicles of varying sizes have been detected by implementing a dynamic thresholding scheme.Detection was done on the first image of every burst.Then,to track vehicles,the model of each vehicle was made to find its matches in the succeeding images using the template matching algorithm.To further improve the tracking accuracy by incorporating motion information,Scale Invariant Feature Transform(SIFT)features have been used to find the best possible match among multiple matches.An accuracy rate of 87%for detection and 80%accuracy for tracking in the A1 Motorway Netherland dataset has been achieved.For the Vehicle Aerial Imaging from Drone(VAID)dataset,an accuracy rate of 86%for detection and 78%accuracy for tracking has been achieved.展开更多
The joint entity relation extraction model which integrates the semantic information of relation is favored by relevant researchers because of its effectiveness in solving the overlapping of entities,and the method of...The joint entity relation extraction model which integrates the semantic information of relation is favored by relevant researchers because of its effectiveness in solving the overlapping of entities,and the method of defining the semantic template of relation manually is particularly prominent in the extraction effect because it can obtain the deep semantic information of relation.However,this method has some problems,such as relying on expert experience and poor portability.Inspired by the rule-based entity relation extraction method,this paper proposes a joint entity relation extraction model based on a relation semantic template automatically constructed,which is abbreviated as RSTAC.This model refines the extraction rules of relation semantic templates from relation corpus through dependency parsing and realizes the automatic construction of relation semantic templates.Based on the relation semantic template,the process of relation classification and triplet extraction is constrained,and finally,the entity relation triplet is obtained.The experimental results on the three major Chinese datasets of DuIE,SanWen,and FinRE showthat the RSTAC model successfully obtains rich deep semantics of relation,improves the extraction effect of entity relation triples,and the F1 scores are increased by an average of 0.96% compared with classical joint extraction models such as CasRel,TPLinker,and RFBFN.展开更多
Background: As the population age structure gradually ages, more and more elderly people were found to have pulmonary nodules during physical examinations. Most elderly people had underlying diseases such as heart, lu...Background: As the population age structure gradually ages, more and more elderly people were found to have pulmonary nodules during physical examinations. Most elderly people had underlying diseases such as heart, lung, brain and blood vessels and cannot tolerate surgery. Computed tomography (CT)-guided percutaneous core needle biopsy (CNB) was the first choice for pathological diagnosis and subsequent targeted drugs, immune drugs or ablation treatment. CT-guided percutaneous CNB requires clinicians with rich CNB experience to ensure high CNB accuracy, but it was easy to cause complications such as pneumothorax and hemorrhage. Three-dimensional (3D) printing coplanar template (PCT) combined with CT-guided percutaneous pulmonary CNB biopsy has been used in clinical practice, but there was no prospective, randomized controlled study. Methods: Elderly patients with lung nodules admitted to the Department of Oncology of our hospital from January 2019 to January 2023 were selected. A total of 225 elderly patients were screened, and 30 patients were included after screening. They were randomly divided into experimental group (Group A: 30 cases) and control group (Group B: 30 cases). Group A was given 3D-PCT combined with CT-guided percutaneous pulmonary CNB biopsy, Group B underwent CT-guided percutaneous pulmonary CNB. The primary outcome measure of this study was the accuracy of diagnostic CNB, and the secondary outcome measures were CNB time, number of CNB needles, number of pathological tissues and complications. Results: The diagnostic accuracy of group A and group B was 96.67% and 76.67%, respectively (P = 0.026). There were statistical differences between group A and group B in average CNB time (P = 0.001), number of CNB (1 vs more than 1, P = 0.029), and pathological tissue obtained by CNB (3 vs 1, P = 0.040). There was no statistical difference in the incidence of pneumothorax and hemorrhage between the two groups (P > 0.05). Conclusions: 3D-PCT combined with CT-guided percutaneous CNB can improve the puncture accuracy of elderly patients, shorten the puncture time, reduce the number of punctures, and increase the amount of puncture pathological tissue, without increasing pneumothorax and hemorrhage complications. We look forward to verifying this in a phase III randomized controlled clinical study. .展开更多
Copper azide(CA), as a primary explosive with high energy density, has not been practically used so far because of its high electrostatic sensitivity. The Cu2O@HKUST-1 core-shell structure hybrid material was synthesi...Copper azide(CA), as a primary explosive with high energy density, has not been practically used so far because of its high electrostatic sensitivity. The Cu2O@HKUST-1 core-shell structure hybrid material was synthesized by the “bottle around ship” methodology in this research by regulating the dissolution rate of Cu2O and the generation rate of metal-organic framework(MOF) materials. Cu2O@HKUST-1 was carbonized to form a Cu O@porous carbon(CuO@PC) composite material. CuO@PC was synthesized into a copper azide(CA) @PC composite energetic material through a gas-solid phase in-situ azidation reaction.CA is encapsulated in PC framework, which acts as a nanoscale Faraday cage, and its excellent electrical conductivity prevents electrostatic charges from accumulating on the energetic material’s surface. The CA@PC composite energetic material has a CA content of 89.6%, and its electrostatic safety is nearly 30times that of pure CA(1.47 mJ compared to 0.05 mJ). CA@PC delivers an outstanding balance of safety and energy density compared to similar materials.展开更多
The development of economical,efficient,and robust electrocatalysts toward the hydrogen evolution reaction(HER)is highly imperative for the rapid advancement of renewable H2 energy-associated technologies.Extensive ut...The development of economical,efficient,and robust electrocatalysts toward the hydrogen evolution reaction(HER)is highly imperative for the rapid advancement of renewable H2 energy-associated technologies.Extensive utilization of the heterointerface effect can endow the catalysts with remarkably boosted electrocatalytic performance due to the modified electronic state of active sites.Herein,we demonstrate deliberate crafting of CoP/CoO heterojunction porous nanotubes(abbreviated as CoP/CoO PNTs hereafter)using a self-sacrificial template-engaged strategy.Precise control over the Kirkendall diffusion process of the presynthesized cobalt–aspartic acid complex nanowires is indispensable for the formation of CoP/CoO heterostructures.The topochemical transformation strategy of the reactive templates enables uniform and maximized construction of CoP/CoO heterojunctions throughout all the porous nanotubes.The establishment of CoP/CoO heterojunctions could considerably modify the electronic configuration of the active sites and also improve the electric conductivity,which endows the resultant CoP/CoO PNTs with enhanced intrinsic activity.Simultaneously,the hollow and porous nanotube architectures allow sufficient accessibility of exterior/interior surfaces and molecular permeability,drastically promoting the reaction kinetics.Consequently,when used as HER electrocatalysts,the well-designed CoP/CoO PNTs show Pt-like activity,with an overpotential of only 61 mV at 10mA cm^(−2) and excellent stability in 1.0M KOH medium,exceeding those of the vast majority of the previously reported nonprecious candidates.Density functional theory calculations further substantiate that the construction of CoP/CoO heterojunctions enables optimization of the Gibbs free energies for water adsorption and H adsorption,resulting in boosted HER intrinsic activity.The present study may provide in-depth insights into the fundamental mechanisms of heterojunction-induced electronic regulation,which may pave the way for the rational design of advanced Earth-abundant electrocatalysts in the future.展开更多
The hollow strontium carbonate pompons was synthesized for the first time by a controlled reaction precipitation method with sodium dodecyl benzene sulfonate(SDBS)and polyvinyl pyrrolidone(PVP)work together as templat...The hollow strontium carbonate pompons was synthesized for the first time by a controlled reaction precipitation method with sodium dodecyl benzene sulfonate(SDBS)and polyvinyl pyrrolidone(PVP)work together as template.The sampled particles were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),nitrogen adsorption-desorption measurement,X-ray diffraction(XRD),Energy dispersive X-Ray spectroscopy(EDX),Fourier transform infrared spectroscopy(FTIR),Thermogravimetric analysis and differential scanning calorimetry(TGA-DSC),etc.It is shown that the assynthesized hollow strontium carbonate pompons with the size of about 2μm consist of flake-like particles under the optimal reaction conditions.The formation mechanism of hollow strontium carbonate pompons was preliminarily explored.展开更多
Analysis and recognition of ancient scripts is a challenging task as these scripts are inscribed on pillars,stones,or leaves.Optical recognition systems can help in preserving,sharing,and accelerate the study of the a...Analysis and recognition of ancient scripts is a challenging task as these scripts are inscribed on pillars,stones,or leaves.Optical recognition systems can help in preserving,sharing,and accelerate the study of the ancient scripts,but lack of standard dataset for such scripts is a major constraint.Although many scholars and researchers have captured and uploaded inscription images on various websites,manual searching,downloading and extraction of these images is tedious and error prone.Web search queries return a vast number of irrelevant results,and manually extracting images for a specific script is not scalable.This paper proposes a novelmultistage system to identify the specific set of script images from a large set of images downloaded from web sources.The proposed system combines the two most important pattern matching techniques-Scale Invariant Feature Transform(SIFT)and Template matching,in a sequential pipeline,and by using the key strengths of each technique,the system can discard irrelevant images while retaining a specific type of images.展开更多
This paper represents a template matching using statistical model and parametric template for multi-template. This algorithm consists of two phases: training and matching phases. In the training phase, the statistical...This paper represents a template matching using statistical model and parametric template for multi-template. This algorithm consists of two phases: training and matching phases. In the training phase, the statistical model created by principal component analysis method (PCA) can be used to synthesize multi-template. The advantage of PCA is to reduce the variances of multi-template. In the matching phase, the normalized cross correlation (NCC) is employed to find the candidates in inspection images. The relationship between image block and multi-template is built to use parametric template method. Results show that the proposed method is more efficient than the conventional template matching and parametric template. Furthermore, the proposed method is more robust than conventional template method.展开更多
Nanocrystals provide a variety of size and shape-dependent properties with applications in a wide range of areas, gaining much attention in the past few years. However, due to the nature of the kinetic nanocrystal gro...Nanocrystals provide a variety of size and shape-dependent properties with applications in a wide range of areas, gaining much attention in the past few years. However, due to the nature of the kinetic nanocrystal growth, the procedures often require strict experimental conditions and the shape and size of nanocrystals are difficult to control. In such context, organic templates, which are artificially modified or synthesized, can direct inorganic nanocrystal nucleation and growth to achieve desired shape, size and ultimately properties. In this review article, two general categories of organic templates used for making inorganic nanomaterials are discussed:biotemplates(e.g., peptide, lipid, DNA, and capsid) and block copolymer templates(e.g., block copolymer micelles, star-like block copolymer unimicelles). The goal of this review is to bridge these gaps and help foster a greater awareness of the range and applicability of different organic templating techniques within the field of nanotechnology.展开更多
Sn Co alloy nanowires were successfully electrodeposited from Sn Cl2-Co Cl2-1-ethyl-3-methylimidazolium chloride(EMIC) ionic liquid without a template. The nanowires were obtained from the molar ratio of 5:40:60 for S...Sn Co alloy nanowires were successfully electrodeposited from Sn Cl2-Co Cl2-1-ethyl-3-methylimidazolium chloride(EMIC) ionic liquid without a template. The nanowires were obtained from the molar ratio of 5:40:60 for Sn Cl2(25)Co Cl2(25)EMIC at-0.55 V and showed a minimum diameter of about 50 nm and lengths of over 20 μm. The as-fabricated SnCo nanowires were about 70 nm in diameter and featured a Sn/Co weight ratio of 3.85:1, when used as an anode for a Li-ion battery, they presented respective specific capacities of 687 and 678 m Ah·g^(-1) after the first charge and discharge cycle and maintained capacities of about 654 m Ah·g^(-1) after 60 cycles and 539 m Ah·g^(-1) after 80 cycles at a current density of 300 m A·g^(-1). Both the nanowire structure and presence of elemental Co helped buffer large volume changes in the Sn anode during charging and discharging to a certain extent, thereby improving the cycling performance of the Sn anode.展开更多
This study is aimed to explore the clinical application of the guiding template designed by three-dimensional printing data for the insertion of sacroiliac screws.A retrospective study of 7 cases (from July 2016 to De...This study is aimed to explore the clinical application of the guiding template designed by three-dimensional printing data for the insertion of sacroiliac screws.A retrospective study of 7 cases (from July 2016 to December 2016),in which the guiding template printed by the three-dimensional printing technique was used for the insertion of sacroiliac screws of patients with posterior ring injuries of pelvis,was performed.Totally,4 males and 3 females were included in template group,aged from 38to 65years old (mean 50.86±8.90).Of them,5 had sacral fractures (3 with Denis type Ⅰ and 2 with type Ⅱ)and 2 the separation of sacroiliac joint.Guiding templates were firstly made by the three-dimensional printing technique based on the pre-operative CT data. Surgical operations for the stabilization of pelvic ring by applying the guiding templates were carried out.A group of 8 patients with sacroiliac injuries treated by percutaneous sacroiliac screws were analyzed as a control group retrospectively.The time of each screw insertion,volume of intra-operative blood loss,and the exposure to X ray were analyzed and the Matta's radiological criteria were used to evaluate the reduction quality.The Majeed score was used to evaluate postoperative living quality.The visual analogue scale (VAS)was applied at different time points to judge pain relief of coccydynia.All the 7 patients in the template group were closely followed up radiographically and clinically for 14 to 20 months,mean (16.57±2.44)months.Totally 9 sacroiliac screws for the S 1 and S2 vertebra were inserted in the 7 patients.The time length for each screw insertion ranged from 450 to 870 s,mean (690.56±135.68)s,and the number of times of exposure to X ray were 4 to 8,mean (5.78±1.20).The intra-operative blood loss ranged from 45to 120 mL,mean (75±23.32)mL.According to Matta's radiology criteria,the fracture and dislocation reduction were excellent in 6cases and good in 1.The pre-operative VAS score ranged from 5.2 to 8.1,mean (7.13±1.00).The average one-week/six-month post-operative VAS was (5.33±0.78)and (1.33±0.66),respectively (P<0.05 when compared with pre-operative VAS).The 12-month post-operative Majeed score ranged from 86 to 92,mean (90.29±2.21).The three-dimensional printed guiding template for sacroiliac screw insertion,which could significantly shorten the operation time,provide a satisfied outcome of the stabilization of the pelvic ring,and protect doctors and patients from X-ray exposure,might be a practical and valuable new clinical technique.展开更多
Ultrathin polydopamine microcapsules with hierarchical structure and porosity were prepared for the immobilization of multienzymes using metal-organic framework(MOF) as the template.The multienzyme/MOF composite was f...Ultrathin polydopamine microcapsules with hierarchical structure and porosity were prepared for the immobilization of multienzymes using metal-organic framework(MOF) as the template.The multienzyme/MOF composite was first prepared using a "one-pot" co-precipitation approach via the coordination and self-assembly of zinc ions and 2-methylimidazole in the presence of enzymes.The obtained nanoparticles were then coated with polydopamine thin layer through the self-polymerization of dopamine under alkaline condition.The polydopamine microcapsules with an ultrathin shell thickness of ~48 nm were finally generated by removing the MOF template at acidic condition.Three enzymes were encapsulated in PDA microcapsules including carbonic anhydrase(CA),formate dehydrogenase(FateDH),and glutamate dehydrogenase(GDH).FateDH that catalyzed the main reaction of CO_(2) reduction to formic acid retained 94.7% activity of equivalent free FateDH.Compared with free multienzymes,the immobilized ones embedded in PDA microcapsules exhibited 4.5-times higher of formate production and high catalytic efficiency with a co-factor-based formate yield of 342%.展开更多
A novel method was described for the production of silver nanoparticle by using nano-carbon as active template.Special ultrasonic condition was used to assure the active effect of the template and achieve an even and ...A novel method was described for the production of silver nanoparticle by using nano-carbon as active template.Special ultrasonic condition was used to assure the active effect of the template and achieve an even and stable micro-reactor system,therefore yield uniform silver nanoparticle without obvious agglomeration.By laser granularity instrument measurement,the silver nanoparticles show a mean diameter of 20.4 nm and narrow distribution between 18.7 nm and 23.0 nm according to the optimum technology.Regular spherical morphology can be observed by transmission electron microscopy(TEM).X-ray diffraction analysis indicates that Ag+ is deoxidized to form metal Ag during producing precursor,subsequent calcinations promote phase transformation from nonholonomic crystal to complete cubic crystal,which is consistent with the standard JCPDS card of silver.The results reveal that the nano-carbon in active template system not only exerts micro-reactor and steric stabilization effect,but also acts as reducing agent during the reaction.展开更多
Mesoporous poly(styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis was achieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydrid...Mesoporous poly(styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis was achieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymer in the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template or pore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m(2)/g) and pore volumes (e.g. 0.6 cm(3)/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, pore volumes and pore diameters of the hybrid materials increase.展开更多
Target tracking is very important in computer vision and related areas. It is usually difficult to accurately track fast motion target with appearance variations. Sometimes the tracking algorithms fail for heavy appea...Target tracking is very important in computer vision and related areas. It is usually difficult to accurately track fast motion target with appearance variations. Sometimes the tracking algorithms fail for heavy appearance variations. A multiple template method to track fast motion target with appearance changes is presented under the framework of appearance model with Kalman filter. Firstly, we construct a multiple template appearance model, which includes both the original template and templates affinely transformed from original one. Generally speaking, appearance variations of fast motion target can be covered by affine transformation. Therefore, the affine tr templates match the target of appearance variations better than conventional models. Secondly, we present an improved Kalman filter for approx- imate estimating the motion trail of the target and a modified similarity evaluation function for exact matching. The estimation approach can reduce time complexity of the algorithm and keep accuracy in the meantime. Thirdly, we propose an adaptive scheme for updating template set to alleviate the drift problem. The scheme considers the following differences: the weight differences in two successive frames; different types of affine transformation applied to templates. Finally, experiments demonstrate that the proposed algorithm is robust to appearance varia- tion of fast motion target and achieves real-time performance on middle/low-range computing platform.展开更多
Optoelectronic characterisation of an individual ZnO nanowire in contact with a micro-grid template has been studied. The low-cost micro-grid template made by photolithography is used to fabricate the ohmic contact me...Optoelectronic characterisation of an individual ZnO nanowire in contact with a micro-grid template has been studied. The low-cost micro-grid template made by photolithography is used to fabricate the ohmic contact metal electrodes. The current increases linearly with the bias, indicating good ohmic contacts between the nanowire and the electrodes. The resistivity of the ZnO nanowire is calculated to be 3.8 Ω·cm. We investigate the photoresponses of an individual ZnO nanowire under different light illumination using light emitting diodes (λ= 505 nm, 460 nm, 375 nm) as excitation sources in atmosphere. When individual ZnO nanowire is exposured to different light irradiation, we find that it is extremely sensitive to UV illumination; the conductance is much larger upon UV illumination than that in the dark at room temperature. This phenomenon may be related to the surface oxygen molecule adsorbtion, which indicates their potential application to the optoelectronic switching device.展开更多
The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pore...The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.展开更多
As one of the naturally abundant elements, carbon can present in different molecular structures (allotropes) and thus lead to various physi- cal/chemical properties of carbon-based materials which have found wide ap...As one of the naturally abundant elements, carbon can present in different molecular structures (allotropes) and thus lead to various physi- cal/chemical properties of carbon-based materials which have found wide applications in a variety of fields including electrochemistry, optical, adsorption and catalysis, etc. On the other hand, its different allotropes also endow carbon-based materials with various morphostructures, which have been recently explored to prepare oxides and zeolites/zeotypes with tailored structures. In this review, we mainly summarize the recent advances in using carbon materials as hard templates to synthesize structural materials. Specifically, we focus on the development in the synthetic strategies, such as endotemplating, exotemplating approaches and using carbon materials as chemical reagents for the synthesis of metal carbides or nitrides, with an emphasis laid on the control of morphostructure. Meanwhile, the applications of the obtained materials will be highlighted, especially, in the field of heterogeneous catalysis where enhanced performances have been achieved with the materials derived from carbon-templated methods.展开更多
Nano hierarchical mesoporous ZSM-5 catalysts were prepared with cationic dimethyldiallyl ammonium chloride acrylamide copolymer(PDDA) as a soft second template. Using ZSM-5 catalyst as a matrix,Zn/ZSM-5 catalysts we...Nano hierarchical mesoporous ZSM-5 catalysts were prepared with cationic dimethyldiallyl ammonium chloride acrylamide copolymer(PDDA) as a soft second template. Using ZSM-5 catalyst as a matrix,Zn/ZSM-5 catalysts were also obtained by the wet impregnation method. The effect of the PDDA amount and Zn loadings on the properties of the catalysts,including crystallinity,morphology,textural properties,acid nature and catalytic activity in MTG reaction,was investigated by XRD,FESEM,TEM,Nitrogen adsorption–desorption isotherms and NH3-TPD method,respectively. The MTG reaction was performed in a fixed bed reactor,and the result revealed that the nano hierarchical ZSM-5 catalyst prepared with a PDDA/Si molar ratio of 0.070 possesses longer stable phase of 70 h with a liquid hydrocarbon selectivity of 29.8%.Zn/ZSM-5 catalyst with a Zn/ZSM-5 ratio of 0.07 wt.% shows the highest liquid hydrocarbon selectivity,reaching 62.5%.展开更多
基金the support from the CIPHER Project(IIID 2018-008)funded by the Commission on Higher Education-Philippine California Advanced Research Institutes(CHED-PCARI)。
文摘Transition metal phosphides(TMPs)have been regarded as alternative hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)catalysts owing to their comparable activity to those of noble metal-based catalysts.TMPs have been produced in various morphologies,including hollow and porous nanostructures,which are features deemed desirable for electrocatalytic materials.Templated synthesis routes are often responsible for such morphologies.This paper reviews the latest advances and existing challenges in the synthesis of TMP-based OER and HER catalysts through templated methods.A comprehensive review of the structure-property-performance of TMP-based HER and OER catalysts prepared using different templates is presented.The discussion proceeds according to application,first by HER and further divided among the types of templates used-from hard templates,sacrificial templates,and soft templates to the emerging dynamic hydrogen bubble template.OER catalysts are then reviewed and grouped according to their morphology.Finally,prospective research directions for the synthesis of hollow and porous TMP-based catalysts,such as improvements on both activity and stability of TMPs,design of environmentally benign templates and processes,and analysis of the reaction mechanism through advanced material characterization techniques and theoretical calculations,are suggested.
基金supported by a grant from the Basic Science Research Program through the National Research Foundation(NRF)(2021R1F1A1063634)funded by the Ministry of Science and ICT(MSIT),Republic of KoreaThe authors are thankful to the Deanship of Scientific Research at Najran University for funding this work under the Research Group Funding Program Grant Code(NU/RG/SERC/13/40)+2 种基金Also,the authors are thankful to Prince Satam bin Abdulaziz University for supporting this study via funding from Prince Satam bin Abdulaziz University project number(PSAU/2024/R/1445)This work was also supported by Princess Nourah bint Abdulrahman University Researchers Supporting Project Number(PNURSP2023R54)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Road traffic monitoring is an imperative topic widely discussed among researchers.Systems used to monitor traffic frequently rely on cameras mounted on bridges or roadsides.However,aerial images provide the flexibility to use mobile platforms to detect the location and motion of the vehicle over a larger area.To this end,different models have shown the ability to recognize and track vehicles.However,these methods are not mature enough to produce accurate results in complex road scenes.Therefore,this paper presents an algorithm that combines state-of-the-art techniques for identifying and tracking vehicles in conjunction with image bursts.The extracted frames were converted to grayscale,followed by the application of a georeferencing algorithm to embed coordinate information into the images.The masking technique eliminated irrelevant data and reduced the computational cost of the overall monitoring system.Next,Sobel edge detection combined with Canny edge detection and Hough line transform has been applied for noise reduction.After preprocessing,the blob detection algorithm helped detect the vehicles.Vehicles of varying sizes have been detected by implementing a dynamic thresholding scheme.Detection was done on the first image of every burst.Then,to track vehicles,the model of each vehicle was made to find its matches in the succeeding images using the template matching algorithm.To further improve the tracking accuracy by incorporating motion information,Scale Invariant Feature Transform(SIFT)features have been used to find the best possible match among multiple matches.An accuracy rate of 87%for detection and 80%accuracy for tracking in the A1 Motorway Netherland dataset has been achieved.For the Vehicle Aerial Imaging from Drone(VAID)dataset,an accuracy rate of 86%for detection and 78%accuracy for tracking has been achieved.
基金supported by the National Natural Science Foundation of China(Nos.U1804263,U1736214,62172435)the Zhongyuan Science and Technology Innovation Leading Talent Project(No.214200510019).
文摘The joint entity relation extraction model which integrates the semantic information of relation is favored by relevant researchers because of its effectiveness in solving the overlapping of entities,and the method of defining the semantic template of relation manually is particularly prominent in the extraction effect because it can obtain the deep semantic information of relation.However,this method has some problems,such as relying on expert experience and poor portability.Inspired by the rule-based entity relation extraction method,this paper proposes a joint entity relation extraction model based on a relation semantic template automatically constructed,which is abbreviated as RSTAC.This model refines the extraction rules of relation semantic templates from relation corpus through dependency parsing and realizes the automatic construction of relation semantic templates.Based on the relation semantic template,the process of relation classification and triplet extraction is constrained,and finally,the entity relation triplet is obtained.The experimental results on the three major Chinese datasets of DuIE,SanWen,and FinRE showthat the RSTAC model successfully obtains rich deep semantics of relation,improves the extraction effect of entity relation triples,and the F1 scores are increased by an average of 0.96% compared with classical joint extraction models such as CasRel,TPLinker,and RFBFN.
文摘Background: As the population age structure gradually ages, more and more elderly people were found to have pulmonary nodules during physical examinations. Most elderly people had underlying diseases such as heart, lung, brain and blood vessels and cannot tolerate surgery. Computed tomography (CT)-guided percutaneous core needle biopsy (CNB) was the first choice for pathological diagnosis and subsequent targeted drugs, immune drugs or ablation treatment. CT-guided percutaneous CNB requires clinicians with rich CNB experience to ensure high CNB accuracy, but it was easy to cause complications such as pneumothorax and hemorrhage. Three-dimensional (3D) printing coplanar template (PCT) combined with CT-guided percutaneous pulmonary CNB biopsy has been used in clinical practice, but there was no prospective, randomized controlled study. Methods: Elderly patients with lung nodules admitted to the Department of Oncology of our hospital from January 2019 to January 2023 were selected. A total of 225 elderly patients were screened, and 30 patients were included after screening. They were randomly divided into experimental group (Group A: 30 cases) and control group (Group B: 30 cases). Group A was given 3D-PCT combined with CT-guided percutaneous pulmonary CNB biopsy, Group B underwent CT-guided percutaneous pulmonary CNB. The primary outcome measure of this study was the accuracy of diagnostic CNB, and the secondary outcome measures were CNB time, number of CNB needles, number of pathological tissues and complications. Results: The diagnostic accuracy of group A and group B was 96.67% and 76.67%, respectively (P = 0.026). There were statistical differences between group A and group B in average CNB time (P = 0.001), number of CNB (1 vs more than 1, P = 0.029), and pathological tissue obtained by CNB (3 vs 1, P = 0.040). There was no statistical difference in the incidence of pneumothorax and hemorrhage between the two groups (P > 0.05). Conclusions: 3D-PCT combined with CT-guided percutaneous CNB can improve the puncture accuracy of elderly patients, shorten the puncture time, reduce the number of punctures, and increase the amount of puncture pathological tissue, without increasing pneumothorax and hemorrhage complications. We look forward to verifying this in a phase III randomized controlled clinical study. .
基金the financial support by Postgraduate Research & Practice Innovation Program from Jiangsu Science and Technology Department under Grant number KYCX19_0320。
文摘Copper azide(CA), as a primary explosive with high energy density, has not been practically used so far because of its high electrostatic sensitivity. The Cu2O@HKUST-1 core-shell structure hybrid material was synthesized by the “bottle around ship” methodology in this research by regulating the dissolution rate of Cu2O and the generation rate of metal-organic framework(MOF) materials. Cu2O@HKUST-1 was carbonized to form a Cu O@porous carbon(CuO@PC) composite material. CuO@PC was synthesized into a copper azide(CA) @PC composite energetic material through a gas-solid phase in-situ azidation reaction.CA is encapsulated in PC framework, which acts as a nanoscale Faraday cage, and its excellent electrical conductivity prevents electrostatic charges from accumulating on the energetic material’s surface. The CA@PC composite energetic material has a CA content of 89.6%, and its electrostatic safety is nearly 30times that of pure CA(1.47 mJ compared to 0.05 mJ). CA@PC delivers an outstanding balance of safety and energy density compared to similar materials.
基金supported by the National Natural Science Foundation of China(Grant Nos.21972068,21875112,and 22075290)the Nanjing IPE Institute of Green Manufacturing Industrythe Beijing Natural Science Foundation(Grant No.Z200012).
文摘The development of economical,efficient,and robust electrocatalysts toward the hydrogen evolution reaction(HER)is highly imperative for the rapid advancement of renewable H2 energy-associated technologies.Extensive utilization of the heterointerface effect can endow the catalysts with remarkably boosted electrocatalytic performance due to the modified electronic state of active sites.Herein,we demonstrate deliberate crafting of CoP/CoO heterojunction porous nanotubes(abbreviated as CoP/CoO PNTs hereafter)using a self-sacrificial template-engaged strategy.Precise control over the Kirkendall diffusion process of the presynthesized cobalt–aspartic acid complex nanowires is indispensable for the formation of CoP/CoO heterostructures.The topochemical transformation strategy of the reactive templates enables uniform and maximized construction of CoP/CoO heterojunctions throughout all the porous nanotubes.The establishment of CoP/CoO heterojunctions could considerably modify the electronic configuration of the active sites and also improve the electric conductivity,which endows the resultant CoP/CoO PNTs with enhanced intrinsic activity.Simultaneously,the hollow and porous nanotube architectures allow sufficient accessibility of exterior/interior surfaces and molecular permeability,drastically promoting the reaction kinetics.Consequently,when used as HER electrocatalysts,the well-designed CoP/CoO PNTs show Pt-like activity,with an overpotential of only 61 mV at 10mA cm^(−2) and excellent stability in 1.0M KOH medium,exceeding those of the vast majority of the previously reported nonprecious candidates.Density functional theory calculations further substantiate that the construction of CoP/CoO heterojunctions enables optimization of the Gibbs free energies for water adsorption and H adsorption,resulting in boosted HER intrinsic activity.The present study may provide in-depth insights into the fundamental mechanisms of heterojunction-induced electronic regulation,which may pave the way for the rational design of advanced Earth-abundant electrocatalysts in the future.
基金Funded by the National Natural Science Foundation of China(No.22002143)the Natural Science Foundation of Shanxi Province of China(No.201901D211223)the Postgraduate Students Scientific Research Project of North University of China(No.20201766)。
文摘The hollow strontium carbonate pompons was synthesized for the first time by a controlled reaction precipitation method with sodium dodecyl benzene sulfonate(SDBS)and polyvinyl pyrrolidone(PVP)work together as template.The sampled particles were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),nitrogen adsorption-desorption measurement,X-ray diffraction(XRD),Energy dispersive X-Ray spectroscopy(EDX),Fourier transform infrared spectroscopy(FTIR),Thermogravimetric analysis and differential scanning calorimetry(TGA-DSC),etc.It is shown that the assynthesized hollow strontium carbonate pompons with the size of about 2μm consist of flake-like particles under the optimal reaction conditions.The formation mechanism of hollow strontium carbonate pompons was preliminarily explored.
文摘Analysis and recognition of ancient scripts is a challenging task as these scripts are inscribed on pillars,stones,or leaves.Optical recognition systems can help in preserving,sharing,and accelerate the study of the ancient scripts,but lack of standard dataset for such scripts is a major constraint.Although many scholars and researchers have captured and uploaded inscription images on various websites,manual searching,downloading and extraction of these images is tedious and error prone.Web search queries return a vast number of irrelevant results,and manually extracting images for a specific script is not scalable.This paper proposes a novelmultistage system to identify the specific set of script images from a large set of images downloaded from web sources.The proposed system combines the two most important pattern matching techniques-Scale Invariant Feature Transform(SIFT)and Template matching,in a sequential pipeline,and by using the key strengths of each technique,the system can discard irrelevant images while retaining a specific type of images.
文摘This paper represents a template matching using statistical model and parametric template for multi-template. This algorithm consists of two phases: training and matching phases. In the training phase, the statistical model created by principal component analysis method (PCA) can be used to synthesize multi-template. The advantage of PCA is to reduce the variances of multi-template. In the matching phase, the normalized cross correlation (NCC) is employed to find the candidates in inspection images. The relationship between image block and multi-template is built to use parametric template method. Results show that the proposed method is more efficient than the conventional template matching and parametric template. Furthermore, the proposed method is more robust than conventional template method.
基金financialy supported by the National Key R&D Program of China(2017YFB0307600,to Xinchang Pang)Key R&D and Promotion Special Program of Henan Province(Grant No.2018-966,to Xinchang Pang)+1 种基金the 111 project(D18023)1000 Young Talent(to Xinchang Pang)
文摘Nanocrystals provide a variety of size and shape-dependent properties with applications in a wide range of areas, gaining much attention in the past few years. However, due to the nature of the kinetic nanocrystal growth, the procedures often require strict experimental conditions and the shape and size of nanocrystals are difficult to control. In such context, organic templates, which are artificially modified or synthesized, can direct inorganic nanocrystal nucleation and growth to achieve desired shape, size and ultimately properties. In this review article, two general categories of organic templates used for making inorganic nanomaterials are discussed:biotemplates(e.g., peptide, lipid, DNA, and capsid) and block copolymer templates(e.g., block copolymer micelles, star-like block copolymer unimicelles). The goal of this review is to bridge these gaps and help foster a greater awareness of the range and applicability of different organic templating techniques within the field of nanotechnology.
基金financially supported by the National Natural Science Foundation of China(No.51474107)the Opening Project Fund of Key Laboratory of Common Associated Non-ferrous Metal Resources Pressure Hydrometallurgy Technology(No.yy2016008)
文摘Sn Co alloy nanowires were successfully electrodeposited from Sn Cl2-Co Cl2-1-ethyl-3-methylimidazolium chloride(EMIC) ionic liquid without a template. The nanowires were obtained from the molar ratio of 5:40:60 for Sn Cl2(25)Co Cl2(25)EMIC at-0.55 V and showed a minimum diameter of about 50 nm and lengths of over 20 μm. The as-fabricated SnCo nanowires were about 70 nm in diameter and featured a Sn/Co weight ratio of 3.85:1, when used as an anode for a Li-ion battery, they presented respective specific capacities of 687 and 678 m Ah·g^(-1) after the first charge and discharge cycle and maintained capacities of about 654 m Ah·g^(-1) after 60 cycles and 539 m Ah·g^(-1) after 80 cycles at a current density of 300 m A·g^(-1). Both the nanowire structure and presence of elemental Co helped buffer large volume changes in the Sn anode during charging and discharging to a certain extent, thereby improving the cycling performance of the Sn anode.
文摘This study is aimed to explore the clinical application of the guiding template designed by three-dimensional printing data for the insertion of sacroiliac screws.A retrospective study of 7 cases (from July 2016 to December 2016),in which the guiding template printed by the three-dimensional printing technique was used for the insertion of sacroiliac screws of patients with posterior ring injuries of pelvis,was performed.Totally,4 males and 3 females were included in template group,aged from 38to 65years old (mean 50.86±8.90).Of them,5 had sacral fractures (3 with Denis type Ⅰ and 2 with type Ⅱ)and 2 the separation of sacroiliac joint.Guiding templates were firstly made by the three-dimensional printing technique based on the pre-operative CT data. Surgical operations for the stabilization of pelvic ring by applying the guiding templates were carried out.A group of 8 patients with sacroiliac injuries treated by percutaneous sacroiliac screws were analyzed as a control group retrospectively.The time of each screw insertion,volume of intra-operative blood loss,and the exposure to X ray were analyzed and the Matta's radiological criteria were used to evaluate the reduction quality.The Majeed score was used to evaluate postoperative living quality.The visual analogue scale (VAS)was applied at different time points to judge pain relief of coccydynia.All the 7 patients in the template group were closely followed up radiographically and clinically for 14 to 20 months,mean (16.57±2.44)months.Totally 9 sacroiliac screws for the S 1 and S2 vertebra were inserted in the 7 patients.The time length for each screw insertion ranged from 450 to 870 s,mean (690.56±135.68)s,and the number of times of exposure to X ray were 4 to 8,mean (5.78±1.20).The intra-operative blood loss ranged from 45to 120 mL,mean (75±23.32)mL.According to Matta's radiology criteria,the fracture and dislocation reduction were excellent in 6cases and good in 1.The pre-operative VAS score ranged from 5.2 to 8.1,mean (7.13±1.00).The average one-week/six-month post-operative VAS was (5.33±0.78)and (1.33±0.66),respectively (P<0.05 when compared with pre-operative VAS).The 12-month post-operative Majeed score ranged from 86 to 92,mean (90.29±2.21).The three-dimensional printed guiding template for sacroiliac screw insertion,which could significantly shorten the operation time,provide a satisfied outcome of the stabilization of the pelvic ring,and protect doctors and patients from X-ray exposure,might be a practical and valuable new clinical technique.
基金supported by the National Natural Science Foundation of China (31961133004, 21861132017)the National Key Research and Development Program of China (2018YFA0902200)the Fundamental Research Funds for the Central Universities (PT1917, buctrc201)。
文摘Ultrathin polydopamine microcapsules with hierarchical structure and porosity were prepared for the immobilization of multienzymes using metal-organic framework(MOF) as the template.The multienzyme/MOF composite was first prepared using a "one-pot" co-precipitation approach via the coordination and self-assembly of zinc ions and 2-methylimidazole in the presence of enzymes.The obtained nanoparticles were then coated with polydopamine thin layer through the self-polymerization of dopamine under alkaline condition.The polydopamine microcapsules with an ultrathin shell thickness of ~48 nm were finally generated by removing the MOF template at acidic condition.Three enzymes were encapsulated in PDA microcapsules including carbonic anhydrase(CA),formate dehydrogenase(FateDH),and glutamate dehydrogenase(GDH).FateDH that catalyzed the main reaction of CO_(2) reduction to formic acid retained 94.7% activity of equivalent free FateDH.Compared with free multienzymes,the immobilized ones embedded in PDA microcapsules exhibited 4.5-times higher of formate production and high catalytic efficiency with a co-factor-based formate yield of 342%.
文摘A novel method was described for the production of silver nanoparticle by using nano-carbon as active template.Special ultrasonic condition was used to assure the active effect of the template and achieve an even and stable micro-reactor system,therefore yield uniform silver nanoparticle without obvious agglomeration.By laser granularity instrument measurement,the silver nanoparticles show a mean diameter of 20.4 nm and narrow distribution between 18.7 nm and 23.0 nm according to the optimum technology.Regular spherical morphology can be observed by transmission electron microscopy(TEM).X-ray diffraction analysis indicates that Ag+ is deoxidized to form metal Ag during producing precursor,subsequent calcinations promote phase transformation from nonholonomic crystal to complete cubic crystal,which is consistent with the standard JCPDS card of silver.The results reveal that the nano-carbon in active template system not only exerts micro-reactor and steric stabilization effect,but also acts as reducing agent during the reaction.
基金Project supported by the National Natural Science Foundation of China (No. 29874002) and the Outstanding Young Scientist Award from National Natural Science Foundation of China (No. 29825504)
文摘Mesoporous poly(styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis was achieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymer in the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template or pore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m(2)/g) and pore volumes (e.g. 0.6 cm(3)/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, pore volumes and pore diameters of the hybrid materials increase.
基金Supported by the National Science Foundation of China(61472289)Hubei Province Science Foundation(2015CFB254)
文摘Target tracking is very important in computer vision and related areas. It is usually difficult to accurately track fast motion target with appearance variations. Sometimes the tracking algorithms fail for heavy appearance variations. A multiple template method to track fast motion target with appearance changes is presented under the framework of appearance model with Kalman filter. Firstly, we construct a multiple template appearance model, which includes both the original template and templates affinely transformed from original one. Generally speaking, appearance variations of fast motion target can be covered by affine transformation. Therefore, the affine tr templates match the target of appearance variations better than conventional models. Secondly, we present an improved Kalman filter for approx- imate estimating the motion trail of the target and a modified similarity evaluation function for exact matching. The estimation approach can reduce time complexity of the algorithm and keep accuracy in the meantime. Thirdly, we propose an adaptive scheme for updating template set to alleviate the drift problem. The scheme considers the following differences: the weight differences in two successive frames; different types of affine transformation applied to templates. Finally, experiments demonstrate that the proposed algorithm is robust to appearance varia- tion of fast motion target and achieves real-time performance on middle/low-range computing platform.
基金supported by the National Natural Science Foundation of China (Grant Nso. 60776010,60940021 and 11074060)the Natural Science Foundation of Heilongjiang Province,China (Grant No. A2008-07)the Doctoral Start-up Fund of Harbin Normal University,China
文摘Optoelectronic characterisation of an individual ZnO nanowire in contact with a micro-grid template has been studied. The low-cost micro-grid template made by photolithography is used to fabricate the ohmic contact metal electrodes. The current increases linearly with the bias, indicating good ohmic contacts between the nanowire and the electrodes. The resistivity of the ZnO nanowire is calculated to be 3.8 Ω·cm. We investigate the photoresponses of an individual ZnO nanowire under different light illumination using light emitting diodes (λ= 505 nm, 460 nm, 375 nm) as excitation sources in atmosphere. When individual ZnO nanowire is exposured to different light irradiation, we find that it is extremely sensitive to UV illumination; the conductance is much larger upon UV illumination than that in the dark at room temperature. This phenomenon may be related to the surface oxygen molecule adsorbtion, which indicates their potential application to the optoelectronic switching device.
基金This work was supported by the National Natural Science Foundation of China (No. 20023003 and 20128004).
文摘The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.
基金supported by the National Natural Science Foundation of China (21006024)Shanghai Key Laboratory of Molecular Catalysts and Innovative Materials,Department of Chemistry,Fudan University (No. 2010MCIMKF)+2 种基金Fundamental Research Funds for the Central Universities (WA0914023)CPNP Foundation (2011D-5006-0507)sponsored by the Shanghai Pujiang Program (11PJ1402600) for talented returnees
文摘As one of the naturally abundant elements, carbon can present in different molecular structures (allotropes) and thus lead to various physi- cal/chemical properties of carbon-based materials which have found wide applications in a variety of fields including electrochemistry, optical, adsorption and catalysis, etc. On the other hand, its different allotropes also endow carbon-based materials with various morphostructures, which have been recently explored to prepare oxides and zeolites/zeotypes with tailored structures. In this review, we mainly summarize the recent advances in using carbon materials as hard templates to synthesize structural materials. Specifically, we focus on the development in the synthetic strategies, such as endotemplating, exotemplating approaches and using carbon materials as chemical reagents for the synthesis of metal carbides or nitrides, with an emphasis laid on the control of morphostructure. Meanwhile, the applications of the obtained materials will be highlighted, especially, in the field of heterogeneous catalysis where enhanced performances have been achieved with the materials derived from carbon-templated methods.
基金supported by the National Natural Science Foundation of China (grant no.21201130)Foundation of State Key Laboratory of Coal Conversion,China (J14-15-603)+1 种基金China Scholarship Council (CSC no.:201406895017)Shanghai Education Commission Innovation Project (14YZ016)
文摘Nano hierarchical mesoporous ZSM-5 catalysts were prepared with cationic dimethyldiallyl ammonium chloride acrylamide copolymer(PDDA) as a soft second template. Using ZSM-5 catalyst as a matrix,Zn/ZSM-5 catalysts were also obtained by the wet impregnation method. The effect of the PDDA amount and Zn loadings on the properties of the catalysts,including crystallinity,morphology,textural properties,acid nature and catalytic activity in MTG reaction,was investigated by XRD,FESEM,TEM,Nitrogen adsorption–desorption isotherms and NH3-TPD method,respectively. The MTG reaction was performed in a fixed bed reactor,and the result revealed that the nano hierarchical ZSM-5 catalyst prepared with a PDDA/Si molar ratio of 0.070 possesses longer stable phase of 70 h with a liquid hydrocarbon selectivity of 29.8%.Zn/ZSM-5 catalyst with a Zn/ZSM-5 ratio of 0.07 wt.% shows the highest liquid hydrocarbon selectivity,reaching 62.5%.