The present work dealt with the preconcentration of rare earth elements in Saghand ore(Yazd province,Iran)which was achieved by Humphrey spiral using orthogonal optimization method after scrubbing the sample at 45%sol...The present work dealt with the preconcentration of rare earth elements in Saghand ore(Yazd province,Iran)which was achieved by Humphrey spiral using orthogonal optimization method after scrubbing the sample at 45%solid pulp density for 30 min.The pulp was diluted and was fed to a Humphrey spiral for upgrading.The process parameters considered were feed size,feed solids and feed rate,and Taguchi’s L9(34)orthogonal array(OA)was selected for optimization of the process.The results show that the feed rate and feed size were more significant than the other operation parameters of the process.It was also found that under optimal conditions,the concentrate grade of rare earth elements increased from2860 10 6to 6050 10 6and recovery reached to 58%.展开更多
This study investigated total warpage of a type of motorcycle seat support made of polypropylene（PP） during the entire process of injection molding and free-cooling after demolding. Finite element modeling（FEM） an...This study investigated total warpage of a type of motorcycle seat support made of polypropylene（PP） during the entire process of injection molding and free-cooling after demolding. Finite element modeling（FEM） analysis for injection molding and its associated thermal deformation was carried out in the study. The effects of processing parameters on warpage occurring in different stages were analyzed by Taguchi optimization method. It was found that packing pressure is the major factor that affects warpage in the injection stage, whereas cooling time is the major factor in free-cooling stage. From an overall evaluation, melt temperature affects the total warpage most, followed by cooling time, packing pressure, packing time and mold temperature. The result proved that optimum parameters for minimizing final warpage of the injected parts can be obtained only when the deformation in the entire manufacturing process is addressed in both molding and demolding stages.展开更多
基金the deputy director of Research and Development in Atomic Energy of Iran for financial support as well as Nuclear Science and Technology Research Institute for technical support
文摘The present work dealt with the preconcentration of rare earth elements in Saghand ore(Yazd province,Iran)which was achieved by Humphrey spiral using orthogonal optimization method after scrubbing the sample at 45%solid pulp density for 30 min.The pulp was diluted and was fed to a Humphrey spiral for upgrading.The process parameters considered were feed size,feed solids and feed rate,and Taguchi’s L9(34)orthogonal array(OA)was selected for optimization of the process.The results show that the feed rate and feed size were more significant than the other operation parameters of the process.It was also found that under optimal conditions,the concentrate grade of rare earth elements increased from2860 10 6to 6050 10 6and recovery reached to 58%.
基金supported by the Fundamental Research Funds for the Central Universities of China(No.CDJZR12110072)
文摘This study investigated total warpage of a type of motorcycle seat support made of polypropylene（PP） during the entire process of injection molding and free-cooling after demolding. Finite element modeling（FEM） analysis for injection molding and its associated thermal deformation was carried out in the study. The effects of processing parameters on warpage occurring in different stages were analyzed by Taguchi optimization method. It was found that packing pressure is the major factor that affects warpage in the injection stage, whereas cooling time is the major factor in free-cooling stage. From an overall evaluation, melt temperature affects the total warpage most, followed by cooling time, packing pressure, packing time and mold temperature. The result proved that optimum parameters for minimizing final warpage of the injected parts can be obtained only when the deformation in the entire manufacturing process is addressed in both molding and demolding stages.
