Clinical outcomes of management of posterior capsule rupture with air bubble techniques

AIM:To introduce a new surgical technique,air-bubble technique for the management of posterior capsule rupture(PCR)and to evaluate the safety and efficacy of the technique.METHODS:A retrospective case series analysis of 24 eyes of 24 patients,in which the air bubble technique was used for the management of PCR,was performed.Once PCR occurred,a dispersive ophthalmic viscosurgical device(OVD)was injected into the tear.And small volumes(0.2-0.3 mL)of air bubbles were injected beneath the OVD.The air bubble served as a physical barrier and supported the posterior capsule.RESULTS:After surgery,none of the patients had serious complications during the follow-up period of 1 y.Extension of the PCR size occurred in only 2 cases,and additional OVD injection was required only in 3 cases.Air bubbles imparted great stability to the nuclear pieces and the posterior capsule.CONCLUSION:The air-bubble technique may be considered a safe and effective procedure for managing a PCR.It may be of value to the inexperienced cataract surgeon.

Localisation and phase transition of acoustic waves in a soft medium containing air bubbles

We study via numerical experiments the localisation property of an acoustic wave in a viscoelastic soft medium containing randomly-distributed air bubbles. The behaviours of the oscillation phases of bubbles are particularly investigated in various cases for distinguishing efficiently the acoustic localisation from the effects of acoustic absorption caused by the viscosity of medium. The numerical results reveal the phenomenon of ＇phase transition＇ characterized by an unusual collective oscillation of bubbles, which is an effective criterion to unambiguously identify the acoustic localisation in the presence of viscosity. Within the localisation region, the phenomenon of phase transition persists, and a remarkable decrease in the fluctuation of the oscillation phases of bubbles is observed. The localisation phenomenon will be impaired by the enhancement of the viscosity factors, and the extent to which the acoustic wave is localised may be determined by appropriately analyzing the values of the oscillation phases or the amount of reduction of the phase fluctuation. The results are particularly significant for the practical experiments in an attempt to observe the acoustic localisation in such a medium, which is in general subjected to the interference of the great ambiguity resulting from the effect of acoustic absorption.

Experimental Study on Effect of Inclination Angle on Bubble Collapse near Attached Air Bubble

Experiments were conducted to investigate the dynamics of an oscillating bubble generated by a spark in the presence of an inclined attached air bubble.The study primarily focused on the influence of the inclination angle on the behavior of bubble jetting orientation,air bubble shape modes,and motion characteristics of the interaction between the two bubbles.Various complex bubble jetting behaviors were observed,including the presence of multiple types of bubble jetting directions,bubble splitting,and multidirectional jets.Four types of air bubble shapes were defined,namely inclined cup cover-shaped(with and without splitting),double-peaked cup cover-shaped,and inclined L-shaped air bubbles.The formation of different types of bubble jets was analyzed using the vector synthesis principle of the Bjerknes force exerted by the inclined attached air bubble and a steel plate.To describe the diverse orientations of bubble jetting and air bubble shapes,new parameters namely the dimensionless spark bubble oscillation time T^(*)and volume ratio V^(*)that consider the inclination angle are proposed.The findings of this investigation contribute to the existing knowledge and have the potential to further enhance methods for mitigating cavitation damage in marine,hydraulic machinery systems,and medical fields.l fields.

Numerical Study on the Pulsation Characteristics of An Attached Air Bubble Under A Nearby Oscillating Bubble

Numerical simulations of the non-spherical evolution of a pulsating bubble interacting with a stationary air bubble attached to a fixed structure were performed using a three-dimensional boundary integral method by implementing the mirror image method to simplify the processing of the numerical model. Code validation was accomplished by comparing the numerical results with the laboratory experimental data obtained in our previous study. Complex phenomena were observed, including three types of bubble jet forms, which depended strongly on the distance parameter with respect to the initial location of the bubble from the plate, the bubble strength parameter and the initial air bubble radius parameters. The results of the simulations provide detail insight into interesting bubble jetting phenomena,such as bubble splitting, jets moving away from the plate, and bubble shedding. The dimensionless distance parameter and the initial air bubble radius parameter play a major role in determining the shapes of two bubbles and the jetting direction. The air bubble strength parameter did not change the bubble jet direction but influenced the bubble shape.The detachment of the attached air bubble under oscillating bubble suction was easily observed for a small initial air bubble. These results showed that bubble jetting toward the plate was manipulated through the effect of attached air bubble, and that cavitation-based applications and underwater explosion bubble may benefit from this erosion mitigation approach.

Air Bubble Frequency Distribution in the Cavity Zone

In this paper, a series of experiments were carried out on the air concentration distribution. In the cavity zone, the air bubble frequency distribution was similar to the air concentration distribution. The air bubble frequency increased from the bottom and then decreased near the tmaerated black water region. The position of the maximum air bubble frequencyfmax moved downwards. At the air-water cross section, the relationship between the air bubble frequency and the air concentration was self-similar, the position of the maximum air bubble frequency caused by the air-water discontinuity gradually approached C = 0.50 with the development of aeration. Meanwhile, the dimensionless air bubble frequency in the cavity zone followed a parabolic function.

Air tamponade in retinal detachment surgery followed by ultra-widefield fundus imaging system

AIM： To report the surgical result of pars plana vitrectomy（PPV） with air tamponade for rhegmatogenous retinal detachment（RRD） by ultra-widefield fundus imaging system. METHODS： Of 25 consecutive patients（25 eyes） with fresh primary RRD and causative retinal break and vitreous traction were presented. All the patients underwent PPV with air tamponade. Visual acuity（VA） was examined postoperatively and images were captured by ultrawidefield scanning laser ophthalmoscope system（Optos）. RESULTS： Initial reattachment was achieved in 25 cases（100%）. The air volume was 〉60% on the postoperative day（POD） 1. The ultra-widefield images showed that the retina was reattached in all air-filled eyes postoperatively. The retinal break and laser burns in the superior were detected in 22 of 25 eyes（88%）. A missed retinal hole was found under intravitreal air bubble in 1 case（4%）. The air volume was range from 40% to 60% on POD 3. A doublelayered image was seen in 25 of 25 eyes with intravitreal gas. Retinal breaks and laser burns around were seen in the intravitreal air. On POD 7, small bubble without effect was seen in 6 cases（24%） and bubble was completely disappeared in 4 cases（16%）. Small oval bubble in the superior area was observed in 15 cases（60%）. There were no missed and new retinal breaks and no retinal detachment in all cases on the POD 14 and 1 mo and last follow-up. Air disappeared completely on a mean of 9.84 d postoperatively. The mean final postoperative bestcorrected visual acuity（BCVA） was 0.35 log MAR. Mean final postoperative BCVA improved significantly relative to mean preoperative（P〈0.05）. Final VA of 0.3 log MAR or better was seen in 13 eyes. CONCLUSION： PPV with air tamponade is an effective management for fresh RRD with superior retinal breaks. The ultra-widefield fundus imaging can detect postoperative retinal breaks in air-filled eyes. It would be a useful facility for follow-up after PPV with air tamponade. Facedown position and acquired visual rehabilitation may be shorten.

Vitrectomy with air tamponade for surgical repair of rhegmatogenous retinal detachment by eye position guided fluid-air exchange

AIM:To observe the efficacy and safety of pars plana vitrectomy(PPV)with eye position guided fluid-air exchange(FAX)and air to mponade in the treatment of rhegmatogenous retinal detachment(RRD).METHODS:RRD patients without severe proliferative vitreoretinopathy(PVR)C1 or more were enrolled.All patients underwent PPV combining with air tamponade.During operation,the primary retinal break(s)were placed at lower site and subretinal fluid was aspirated through the break(s)at the same time when eye position guided FAX was proceeding.Sufficient laser spots were made to seal the retinal break(s)after FAX,and filtered air was left in vitreous cavity as to mponade agent finally.The main outcomes were primary and final success rates,best corrected visual acuity(BCVA),and the secondary outcomes were rate of postoperative cataract surgery and high intraocular pressure.RESULTS:A total of 37 eyes(20 males and 17 females)with a follow-up time of≥6 mo were included.The range of RRD was 5.6±1.8 h,and the number of retinal breaks was 1.9±1.2.The breaks located at inferior quadrants(between 3:00 and 9:00)in 5 cases(13.5%),and both superior and inferior breaks were found in 3 cases(8.1%).A total of 25 cases(67.6%)with macular detached involvement,9 cases(24.3%)with intraocular lens,and 8 patients(21.6%)were treated with phacoemulsification and intraocular lens implantation together.The success rate of primary retinal reattachment was 100%(37/37).At 6 mo postoperatively,BCVA(logMAR)was increased from 1.13±1.07 to 0.23±0.15(P<0.001).Phacoemulsification combined with intraocular lens implantation was performed in 2 patients(5.4%),and one of them underwent macular epiretinal membrane peeling in addition(2.7%).Furthermore,high intraocular pressure was found in 4 cases(10.8%).CONCLUSION:PPV with air tamponade by eye position guided FAX can achieve a high reattachment success rate in the management of patients with RRD,and it has the advantages of short postoperative prone time and fewer operative complications.

INTERACTION OF A CAVITATION BUBBLE AND AN AIR BUBBLE WITH A RIGID BOUNDARY

The motion of a spark-induced cavitation bubble and an air bubble near a rigid boundary is experimentally studied by using high-speed photography.Several dimensionless parameters are used to describe the geometrical configuration of the bubble-bubble-boundary interaction.The bubble-bubble interaction can be considered in two different conditions.The cavitation bubble will collapse towards the air bubble if the air bubble is relatively small,and away from the air bubble if the air bubble is relatively large.The two zones are identified in the bubble-boundary interaction,and they are the danger zone and the safety zone.The relative position,the bubble-boundary distance and the bubble-bubble distance play important roles in the bubble-bubble-boundary interaction,which can be considered in several conditions according to the responses of the bubbles.Air jets are found to penetrate into the cavitation bubbles.The cavitation bubble and the air bubble（air jet） move in their own way without mixing.The motion of a cavitation bubble may be influenced by an air bubble and/or a rigid boundary.The influence of the air bubble and the influence of the boundary may be combined,like some thing of a vector.

Experimental study of the interaction between the spark-induced cavitation bubble and the air bubble

Experiments are carried out by using high-speed photography to investigate the interaction between the spark-generated cavitation bubble and the air bubble in its surrounding fluid. Three problems are discussed in detail： the impact of the air bubble upon the development of the cavitation bubble, the evolution of the air bubble under the influence of the cavitation bubble, and the change of the fluid pressure during the development of a micro jet of the cavitation bubble. Based on the experimental results, under the condition of no air bubble present, the lifetime of the cavitation bubble from expansion to contraction increases with the increase of the maximum radius. On the other hand, when there is an air bubble present, different sized cavitation bubbles have similarity with one another generally in terms of the lifetime from expansion to contraction, which does not depend on the maximum radius. Also, with the presence of an air bubble, the lifetime of the smaller cavitation bubble is extended while that of the bigger ones reduced. Furthermore, it is shown in the experiment that the low pressure formed in the opposite direction to the cavitation bubble micro jet makes the air bubble in the low pressure area being stretched into a steplike shape.

Effect of air bubble size on cavitation erosion reduction

Over the past 60 years, the air concentration in water has been considered as a control index of cavitation erosion reduction and widely used in the designs of hydraulic structures. However, the mechanism of air entrainment against cavitation erosion has been paid good attention to. In the present work, the effect of air bubble size on cavitation erosion reduction was experimentally investigated. A device with micron-scale orifice diameters(10, 20 and 50 μm in size) was specially designed to introduce air bubbles into water. The experiments about the effect of air bubble size were conducted by means of a vibratory apparatus, including the behavior of formation and movement for single air bubble, the characteristics of cavitation erosion reduction at different air entrainment conditions. The findings demonstrate that high air concentration has significant effects on cavitation erosion reduction.But, a notable problem was that the size of air bubbles is of outstanding effect on cavitation erosion reduction. Small air bubbles support to alleviate cavitation erosion, even at same air concentration.

WAVE DISSIPATING PERFORMANCE OF AIR BUBBLE BREAKWATERS WITH DIFFERENT LAYOUTS

The wave dissipating performance of air bubble breakwaters with different layouts is studied by experimental and numerical methods in this article. Based on the assumpation that the mixture of air and water is regarded as a variable density fluid, the mathematical model of the air bubble breakwater is built. The numerical simulation results are compared with the experimental data, which shows that the mathematical model is reasonable for the transmission coefficient Ct m. The influencing factors are studied experimentally and numerically, including the incident wave height H i, the incidentt wave period T , the air amount Qm , the submerged pipe depth D and the single or double air discharging pipe structure. Some valuable conclusions are obtained for further research of the mechanism and practical applications of air bubble breakwaters.

Collapse of cavitation bubbles near air bubbles

The cavitation erosion is one of the common damage modes in water engineering.The study of the interaction among cavitation bubbles,air bubbles and the wall is of great significance for understanding the mechanism of the air entrainment to alleviate the cavitation and to enhance the cavitation erosion mitigation effect of aeration.By using the high-speed camera,the regular patterns of the collapse of cavitation bubbles in the vicinity of the wall and the air bubbles are studied in this paper.It is shown that in the vicinity of air bubbles,the cavitation bubbles may only collapse towards or from air bubbles,while under the dual impacts of air bubbles and the wall,the direction of collapse of the cavitation bubbles depends on the combined vector of the impact forces of the air bubbles and the wall.When the air bubbles are very close to the cavitation bubbles,the air bubbles will be penetrated and stretched by the cavitation bubbles,when the distance between them is short enough,the cavitation bubbles and the air bubbles will connect to form gas-type cavitation bubbles,and the collapse strength will be significantly decreased,when there are two air bubbles near the cavitation bubbles,they may even be penetrated successively by the cavitation bubbles.Thus it can be concluded that during the air entrainment to alleviate the cavitation,the number of air bubbles is more important than the total air concentration.

Numerical simulation and experimental verification of bubble size distribution in an air dense medium fluidized bed

Bubble size distribution is the basic apparent performance and obvious characteristics in the air dense medium fluidized bed (ADMFB). The approaches of numerical simulation and experimental verification were combined to conduct the further research on the bubble generation and movement behavior. The results show that ADMFB could display favorable expanded characteristics after steady fluidization. With different particle size distributions of magnetite powder as medium solids, we selected an appropriate prediction model for the mean bubble diameter in ADMFB. The comparison results indicate that the mean bubble diameters along the bed heights are 35 mm < D b < 66 mm and 40 mm < D b < 69 mm with the magnetite powder of 0.3 mm+0.15mm and 0.15mm+0.074mm, respectively. The prediction model provides good agreements with the experimental and simulation data. Based on the optimal operating gas velocity distribution, the mixture of magnetite powder and <1mm fine coal as medium solids were utilized to carry out the separation experiment on 6-50mm raw coal. The results show that an optimal separation density d P of 1.73g/cm 3 with a probable error E of 0.07g/cm 3 and a recovery efficiency of 99.97% is achieved, which indicates good separation performance by applying ADMFB.

Numerical simulation of gas-liquid two-phase jet flow in air-bubble generator

Air-bubble generator is the key part of the self-inspiration type swirl flotation machines,whose flow field structure has a great effect on flotation.The multiphase volume of fluid(VOF),standard k-ε turbulent model and the SIMPLE method were chosen to simulate the present model;the first order upwind difference scheme was utilized to perform a discrete solution for momentum equation.The distributing law of the velocity,pressure,turbulent kinetic energy of every section along the flow direction of air-bubble generator was analyzed.The results indicate that the bubbles are heavily broken up in the middle cross section of throat sect and the entrance of diffuser sect along the flow direction,and the turbulent kinetic energy of diffuser sect is larger than the entrance of throat sect and mixing chamber.

Bubble performance of a novel dissolved air flotation(DAF) unit

ES-DAF, a novel DAF with low cost, high reliability and easy controllability, was studied. Without a costly air saturator, ES-DAF consists of an ejector and a static mixer between the pressure side and suction side of the recycle rotary pump. The bubble size distribution in this novel unit was studied in detail by using a newly developed CCD imagination through a microscope. Compared with M-DAF under the same saturation pressure, ES-DAF can produce smaller bubble size and higher bubble volume concentration, especially in lower pressure. In addition, the bubble size decreases with the increase of reflux ratio or decrease of superficial air-water ratio. These results suggested that smaller bubbles will be formed when the initial number of nucleation sites increases by enhancing the turbulence intensity in the saturation system.

Inhibition mechanism of air nanobubbles on brass corrosion in circulating cooling water systems

Air nanobubbles(A-NBs)were used to inhibit the brass corrosion in circulating cooling water for the first time in the study.The results of mass loss method and electrochemical method showed that A-NBs had the obvious corrosion inhibition effect.The inhibition rate reached 52%at 35℃.The impedance and surface characterization results of corrosion samples indicated that the corrosion inhibition mechanisms of A-NBs mainly included adsorption of corrosion ions,promoting the formation of the passivation film on metal surface and the formation of the bubble layer and scale film on metal surface.A-NBs are potential excellent corrosion inhibitors.

Air bubble breakup in shear water flows generated by a plug conduit:An experimental investigation

In the context of a sudden contraction plug conduit,the near-wall area experiences a significant shearing effect of water flow,however,the extent to which this shearing effect occurs in bubble-water flow and the related variation mechanisms of air bubble size and number remain unclear.This study employs a model test method to investigate the diffusion process of bubble-water flow in a sudden contraction plug conduit.The size and number of bubbles,as well as their distribution along the shearing section under varying initial air volume conditions,are studied in detail using a high-speed image acquisition system.The experimental findings reveal a self-similar relationship between the number and size of bubbles and their cross-sectional distribution over time.The bubble number and size vary in three stages,i.e.,quasi-suspension,shearing,and shearing completion stages.The direction perpendicular to the conduit exhibits peak values in bubble number distribution over the three stages,with peak value location varying with the near-wall area.As time progresses,the peak value increases,and a larger initial air volume corresponds to a smaller distance of the peak value location from the wall.The size of air bubbles near the wall is consistent with the minimum diameter of air bubbles in shear flow and is hardly affected by the initial air volume.These results aid in comprehending the change law of two-phase water and air flow under a strong shearing effect in the plug conduit,and provide useful insights for hydraulic design in fluid engineering.

Adhesion forces for water/oil droplet and bubble on coking coal surfaces with different roughness

Surface roughness plays a significant role in floatability of coal.In the present paper,coking coal surface was polished by three different sandpapers and the surface properties were characterized by contact angle and roughness measurements.The effect of surface roughness on floatability was investigated by adhesion force measurement system for measuring interaction forces between droplets/bubbles and coking coal surfaces with different roughness.The results showed that the contact angle decreased with increasing roughness yet the adhesion force between the water droplet and coal surface increased owing to the increased contact line and the appearance of line pinning.Maximum adhesion forces between water and surfaces were 111.70,125.48,and 136.42μN when the roughness was 0.23,0.98,and 2.79 μm,respectively.In contrast,under a liquid environment,the adhesion forces between air bubble/oil droplet and coal surfaces were decreased with increasing roughness because of the restriction by water.Maximum adhesion forces of increasing roughness were 97.14,42.76,and 17.86 μN measured at interfaces between air bubble and coal surfaces and 169.48,145.84,and 121.02 lN between oil droplet and surfaces,respectively.Decreasing roughness could be beneficial to the spreading of oil droplets and the adhesion of bubbles which is conducive to flotation separation.

Analysis on Link Between the Macroscopic and Microscopic Air–Water Properties in Self-Aerated Flows

Self-aeration in high-speed free surface flows occurs commonly and is of interest to ocean engineering, hydraulic engineering, and environmental engineering. For two-phase air–water flows, macroscopic air–water flow properties develop gradually, accompanied by the change of microscopic air–water structures. In this article, representational experimental studies on macroscopic and microscopic characteristics of self-aerated open-channel flows are summarized and compared. The isolated effect of the flow Reynolds number and air quantity on the differences in air count rate and chord size are analyzed and discussed. The results show that the characterized flow depth y, affected by the turbulence transfer, is a specific criterion to distinguish the interior air–water structure development. Two distinct linear trends of self-aeration are found, depending on the y/yvariation with a breaking point at Cmean =0.50. The air count rate and size scale in self-aerated flows are affected by the air quantity of self-aerated flows, even with identical flow Reynolds numbers. Thus, a specific parameter is proposed to assess the air–water structures and a series of self-similarity relationships in self-aeration properties are obtained. The link between macroscopic and microscopic air–water properties results in significant scale effect on air–water structures in self-aerated flows.

Bubble entrainment, spray and splashing at hydraulic jumps

The sudden transition from a high-velocity, supercritical open channel flow into a slow-moving sub-critical flow is a hydraulic jump. Such a flow is characterised by a sudden rise of the free-surface, with some strong energy dissipation and air entrainment, waves and spray. New two-phase flow measurements were performed in the developing flow region using a large-size facility operating at large Reynolds numbers. The experimental results demonstrated the complexity of the flow with a developing mixing layer in which entrained bubbles are advected in a high shear stress flow. The relationship between bubble count rates and void fractions was non-unique in the shear zone, supporting earlier observations of some form of double diffusion process between momentum and air bubbles. In the upper region, the flow consisted primarily of water drops and packets sur-rounded by air. Visually significant pray and splashing were significant above the jump roller. The present study is the first com-prehensive study detailing the two-phase flow properties of both the bubbly and spray regions of hydraulic jumps, a first step towards understanding the interactions between bubble entrainment and droplet ejection processes.