Calculation of the CO2 Degassing during Contact Metamorphism and Its Geological Significance:The Model and Example from the Shuanshan Area of the South Tan-Lu Fault Belt

The paper studies CO2 degassing and controlling factors under the condition of contact metamorphism in the Shuangshan area, southern Tan-Lu fault belt and the method of calculating the amount of CO2 degassing. The results show that the amount of CO2 degassing is controlled by the characteristics of the country rocks, including the thermal conductivity, penetrability, porosity and connectivity. Compositions, size and depth of intrusive rock also have an important influence on CO2 degassing, i.e., they generated numerous cracks in the country rocks, and thus allowed the easy flow and accumulation of fluids. The amount of CO2 flux in contact metamorphism is calculated quantitatively based on the metamorphic reaction and time-integrated fluid flux. The value （0.729- 2.446×10^4 mol/cm^2） of CO2 flux suggests that CO2 was provided mainly by the contact metamorphic reaction. The generation and releasing of CO2 are positively correlated with the degree of metamorphism, and XCO2 in fluids gradually increases from dolomite zone to calcite zone, but in the zone of grossular, fluid flux is the largest and XCO2 sharply decreases due to involvement of magmatic water. This study presents evidence that a large amount of industrial-scale CO2 can be produced during contact metamorphism. On the basis of theoretical and practical studies, a cone model has been proposed to response CO2 degassing for the contact metamorphism, and it can be used to explore CO2 accumulations beyond the oil-gas basins. This model can also be applied to the study of inorganic genesis of CO2 accumulations.

Rock Deformation,Component Migration and 18O/16O Variations during Mylonitization in the Southern Tan-Lu Fault Belt

This paper discusses the relationship between the volume loss, fluid flow and component variations in the ductile shear zone of the southern Tan-Lu fault belt. The results show that there is a large amount of fluids flowing through the shear zone during mylonitization, accompanied with the loss of volume of rocks and variations of elements and oxygen isotopes. The calculated temperature for mylonitization in different mylonites ranges from 446 to 484℃, corresponding to that of 475 to 500℃ for the wall rocks. The condition of differential stress during mylonization has been obtained between 99 and 210 MPa, whereas the differential stress in the wall rock gneiss is 70-78 MPa. The mylonites are enriched by factors of 1.32-1.87 in elements such as TiO2, P2O5, MnO, Y, Zr and V and depleted in SiO2, Na2O, K2O, Al203, Sr, Rb and light REEs compared to their protolith gneiss. The immobile element enrichments are attributed to enrichments in residual phases such as ilmentite, zircon, apatite and epidote in mylonites and are interpreted as due to volume losses from 15% to 60% in the ductile shear zone. The largest amount of SiO2 loss is 35.76 g/100 g in the ductile shear zone, which shows the fluid infiltration. Modeling calculated results of the fluid/rock ratio for the ductile shear zone range from 196 to 1192 by assuming different degrees of fluid saturation. Oxygen isotope changes of quartz and feldspar and the calculated fluid are corresponding to the variations of differential flow stress in the ductile shear zone. With increasing differential flow stress, the mylonites show a slight decrease of δ^18O in quartz, K-feldspar and fluid.

A Novel Three-stage Tectonic Model for Mississippi Valleytype Zn-Pb Deposits in Orogenic Fold-and-Thrust Belts

Mississippi Valley-type(MVT) Zn-Pb deposits predominantly form within both orogenic forelands and fold-andthrust belts, yet the mineralization process within the latter tectonic setting remains inadequately understood. This study, through a comprehensive review of MVT deposits across global fold-and-thrust belts, introduces a novel model elucidating the mineralization process in the context of tectonic belt evolution. It is demonstrated that during the stage Ⅰ, regional compression is introduced by early stages of plate convergence, causing the folding and thrusting and creating structural or lithological traps such as evaporite diapirs and unconformity-related carbonate dissolution-collapse structures. Thereafter, in stage Ⅱ, hydrocarbons begin to migrate and accumulate within these traps, where reduced sulfur is generated through thermochemical or bacterial sulfate reduction concurrent with or preceding Zn-Pb mineralization. In the subsequent stage Ⅲ, as plate convergence persists, the regional stress transitions from compression to transpression or extension. Under these conditions, steeply-dipping extensional faults are generated, facilitating the ascent of metalliferous brines into early-formed structural or lithological traps. Precipitation of Zn and Pb sulfides occurs through the mixing of Zn-Pb-transporting fluids with pre-existing reduced sulfur or by interaction with hydrocarbons.

Characterising the nature, evolution and origin of detachment fault in central depression belt, Qiongdongnan Basin of South China Sea: evidence from seismic reflection data

Using regional geological, newly acquired 2D and 3D seismic, drilling and well log data, especially 2D long cable seismic profiles, the structure and stratigraphy in the deep-water area of Qiongdongnan Basin are interpreted. The geometry of No.2 fault system is also re-defined, which is an important fault in the central depression belt of the deep-water area in the Qiongdongnan Basin by employing the quantitative analysis techniques of fault activity and backstripping. Furthermore, the dynamical evolution of the No.2 fault sys-tem and its controls on the central depression belt are analyzed. This study indicates that the Qiongdongnan Basin was strongly influenced by the NW-trending tensile stress field during the Late Eocene. At this time, No.2 fault system initiated and was characterized by several discontinuous fault segments, which controlled a series small NE-trending fault basins. During the Oligocene, the regional extensional stress field changed from NW-SE to SN with the oceanic spreading of South China Sea, the early small faults started to grow along their strikes, eventually connected and merged as the listric shape of the No.2 fault system as ob-served today. No.2 fault detaches along the crustal Moho surface in the deep domain of the seismic profiles as a large-scale detachment fault. A large-scale rollover anticline formed in hanging wall of the detachment fault. There are a series of small fault basins in both limbs of the rollover anticline, showing that the early small basins were involved into fold deformation of the rollover anticline. Structurally, from west to east, the central depression belt is characterized by alternatively arranged graben and half-graben. The central depression belt of the Qiongdongnan Basin lies at the extension zone of the tip of the V-shaped northwest-ern ocean sub-basin of the South China Sea, its activity period is the same as the development period of the northwestern ocean sub-basin, furthermore the emplacement and eruption of magma that originated from the mantle below the Moho surface occurred at the region between Songnan-Baodao and Changchang sags, from east to west with the early-stage spreading of the South China Sea. Therefore, this study not only helps in depicting the structural features and evolution of the deep-water basin in the Qiongdongnan Basin, but also provides the geological and structural evidence for establishing a unified model of continental margin extension and oceanic spreading.

Late Cretaceous Transpressional Fault System: A Case Study of the Yishu Fault Belt, Shandong Province, Eastern China

On the basis of field observations of the structures of three profiles from the Linshu region, deformation characteristics and the tectonic background of the Yishu fault belt in the Late Cretaceous–Early Cenozoic have been discussed in detail.Three structural profiles, whose deformations consist mainly of earlier transpressional faults and later normal faults, were developed for the Mengtuan Formation of the Lower Cretaceous Dasheng Group.Typical positive flower structures, duplex structures, and break-through faults were found in these profiles.On the basis of analyses of the structural deformation and previous geochronological studies, it was concluded that the earlier transpressional faults of the profiles were triggered by the sinistral transpression of the Yishu fault belt in the Late Cretaceous–Early Paleogene, and that the later normal faults, formed during the Late Paleogene–Neogene extension, truncated the earlier transpressional faults.With consideration of the tectonic evolution of the Tan-Lu fault belt and the different drift directions of the Pacific plate since the Cretaceous, we suggest that the major tectonic events of the Late Cretaceous–Neogene in eastern China were mainly controlled by the subduction of the Pacific plate.

^(40)Ar/^(39)Ar Dating of the Shaxi Porphyry Cu-Au Deposit in the Southern Tan-Lu Fault Zone, Anhui Province

Four samples of plagioclase and biotite from the Shaxi porphyry in the lower part of the Yangtze metallogenic belt were analyzed for age determination with the ^40 Ar/^39Ar method. The results yield reproducible ages of 126 Ma to 135 Ma with a high level of confidence according to the agreement between isochron and plateau ages. The four Ar-Ar ages are relatively consistent within the analytical error. These ages are also consistent with, but more precise than, previous K-Ar and Rb-Sr ages and thus provide better constraints on the time of porphyry formation and associated Cu-Au mineralization along the middle to lower part of the Yangtze metallogenic belt. The ages of 126 to 135 Ma are interpreted to represent the intrusive time of the Shaxi porphyry, so that the Cu-Au mineralization should have occurred later due to the post-magmatic hydrothermal event.

Multistage Deformation in the Northeastern Segment of the Jiangshao Fault (Suture) Belt: Constraints for the Relationship between the Yangtze Plate and the Cathaysia Old Land

Multistage deformation events have occurred in the northeastern Jiangshao Fault （Suture） Belt. The earliest two are ductile deformation events. The first is the ca. 820 Ma top-to-the-northwest ductile thrusting, which directly resulted from the collision between the Cathaysia Old Land and the Chencai Arc （？） during the Late Neoproterozoic, and the Jiangnan Orogenic Belt that formed as the ocean closed between the Yangtze Plate and the jointed Cathaysia Old Land and the Chencai Arc due to continuous compression. The second is the ductile left-lateral strike-slipping that occurred in the latest Early Paleozoic. Since the Jinning period, all deformation events represent the reactivation or inversion of intraplate structures due to the collisions between the North China and Yangtze plates during the Triassic and between the Philippine Sea and Eurasian plates during the Cenozoic. In the Triassic, brittle right-lateral strike-slipping and subsequent top-to-the south thrusting occurred along the whole northeastern Jiangshao Fault Zone because of the collision between the North China and Yangtze plates. In the Late Mesozoic, regional extension took place across southeastern China. In the Cenozoic, the collision between the Philippine Sea and Eurasian plates resulted in brittle thrusts along the whole Jiangnan Old land in the Miocene. The Jiangshao Fault Belt is a weak zone in the crust with long history, and its reactivation is one of important characteristics of the deformation in South China; however, late-stage deformation events did not occur beyond the Jiangnan Old Land and most of them are parallel to the strike of the Old Land, which is similar to the Cenozoic deformation in Central Asia. In addition, the Jiangnan old Land is not a collisional boundary between the Yangtze Plate and Cathaysia Old Land in the Triassic.

A DEEP SEISMIC REFLECTION PROFILE ACROSS ALTUN FAULT BELT

Altun fault is regarded as a large\|scale sinistral strike\|slip fault, it is composed of several faults with the different character, and there is a special geological structure in the fault belt, and they constitute the northwestern margin fault belt of the Qinghai\|Tibetan plateau. In order to investigate the deep crust structure in the Altun region, layers which Tarim lithosphere subducted beneath the Qinghai\|Tibetan plateau, the forward structure of the subduction plate and the scale of the plate subduction, a deep seismic reflection profile was designed. Data collection work of the deep seismic reflection profile across Altun fault was completed during 24/8/1999 to 25/9/1999. The profile locates in Qiemo county, Xinjiang Uygur Autonomous Region, the southern end of the profile stretches into Altun Mountains, the northern end locates in the Tarim desert margin. The profile is nearly SN trending and crosses the main Altun fault. The profile totally is 145km long, time record is 30 seconds, the smallest explosive amount is 72～100kg, the biggest explosive amount reaches 200～300kg, the explosive distance is 800m, and detectors are laid at a 50m distance.

3-D shear wave velocity structure in the shallow crust of the Tan-Lu fault zone in Lujiang,Anhui,and adjacent areas,and its tectonic implications

The Tan-Lu fault zone is a large NNE-trending fault zone in eastern China.Investigations of the structures of the fault zone and its surrounding areas have attracted much attention.In this study,we used dense-array ambient noise tomography to construct a threedimensional shear wave velocity model of shallow crust in an area about 80km×70km in Lujiang,Anhui Province,eastern China.For approximately one month we collected continuous ambient noise signals recorded by 90 short-period seismographs in the region,and obtained the short-period Rayleigh wave empirical Green's functions between stations by the cross-correlation method;we also extracted 0.5–8 s fundamental mode Rayleigh wave group velocity and phase velocity dispersion curves.Based on the direct surface wave tomography method,we jointly inverted the group velocity and phase velocity dispersion data of all paths and obtained the 3-D shear wave velocity structure in the depth range of 0–5 km.The results revealed important geological structural features of the study area.In the north region,the sedimentary center of the Hefei Basin—the southwestern part of the Chaohu Lake—shows a significant low-velocity anomaly to a depth of at least 5 km.The southwestern and southeastern regions of the array are the eastern margin of the Dabie orogenic belt and the intrusion area of Luzong volcanic rocks,respectively,and both show obvious high-speed anomalies;the sedimentary area within the Tan-Lu fault zone(about 10 km wide)shows low-velocity anomalies.However,the volcanic rock intrusion area in the fault zone is shown as high velocity.Our shallow crustal imaging results reflect the characteristics of different structures in the study area,especially the high-speed intrusive rocks in the Tan-Lu fault zone,which were probably partially derived from the magmatic activity of Luzong volcanic basin.From the Late Cretaceous to Early Tertiary,the Tan-Lu fault zone was in a period of extensional activity;the special stress environment and the fractured fault zone morphology provided conditions for magma in the Luzong volcanic basin to intrude into the Tan-Lu fault zone in the west.Our 3-D model can also provide important information for deep resource exploration and earthquake strong ground motion simulation.

Correlation Studies of Rare Earth Elements in Syntectonic Intrusions of Strike-Slip Stage along Southern Segment of Tan-Lu Fault Zone

Intrusions in the Zhangbaling uplift zone and the eastern margin of the Dabie orogenic belt belong to the syntectonic intrusions developed during the strike-slip stage in the southern segment of the Tan-Lu fault zone. However, characteristics of rare earth elements show that intrusions in the Zhangbaling uplift zone have the characteristics of mantle source type and those in the eastern margin of Dabie belt are the typical crust source type. Therefore, Au-deposits related to the intrusions in the Zhangbaling uplift zone are developed better than those in the eastern margin of the Dabieshan. The research results of the rare earth elements coincide with the studies of geophysics, tectonic setting and stable isotope. It is further indicated that the rare earth elements offer effective approach to tracing the material sources of magmatic rocks.

Geochronology and Petrogenesis of Granitoid Intrusions in the Feidong District, Southern Tan-Lu Fault Zone, China

The Feidong district is located in the southern segment of the Tan-Lu fault zone that separates the South China Block(NCB)from the North China Craton(NCC).We report zircon U-Pb geochronology and Hf isotope data,as well as whole-rock geochemistry for Xishanyi granodiorite and Jianshan granite in the Feidong district.Zircon U-Pb dating results show that the emplacement ages of the Xishanyi and Jianshan intrusions are 124±3 Ma and 130±1 Ma respectively,coeval with magmatic events linked to large-scale lithospheric thinning in eastern China.The whole-rock geochemistry of the Xishanyi and Jianshan intrusions demonstrate that they are peraluminous,high potassium calc-alkaline I-type granites with adakitic characteristics.Both intrusions underwent weak crustal assimilation during emplacement.The in situ zirconε(Hf)(t)values of the Xishanyi granodiorites range from-26.4 to-21.8,with T(DM2)model ages of 2552 to 2841 Ma.The in situ zirconε(Hf)(t)values of the Jianshan granite are from-27.5 to-23.0 with T(DM2)model ages of 2632 to 2904 Ma.The peak age of inherited zircon grains from the Xishanyi granodiorite and the Jianshan granite were^2.07 Ga and^1.94 Ga,respectively.After compared with the regional magmatism,we suggest that both the Xishanyi and Jianshan granitoid intrusions were derived from partial melting of the NCC lower crust.

Geochemical characteristics of the fluid inclusions in the Gangxi Fault Belt, Huanghua Depression, Bohai Bay Basin, China

We studied the geochemical characteristics of the fluid inclusions in the Ordovician carbonates and the Oligocene Shahejie Formation sandstones from 15 wells in the Gangxi Fault Belt, Huanghua Depression. The fluid inclusions are all sec- ondary with gas/liquid ratio of 5%~10%. Base on Raman they are mainly composed of H2O, CO2 and CH4. The homogenization temperatures, combined with burial and geothermal history of the host rock, indicate that the fluid flows in the Shahejie Formation and the Ordovician carbonates were trapped in Neocene. Using a VG5400 mass spectrometer, the helium isotopic compositions were analyzed. Interpretation of results suggested a significant amount of mantle-derived helium mainly accumulating in the intersections of the NWW trending Xuzhuangzi and NE trending Gangxi faults. The maturity of hydrocarbon decreases from the intersection to the outside pointing out that the fluid related to the NWW trending Xuzhuangzi and NE trending Gangxi faults. These factors implied the fluid inclusions have a close relationship to the local tectonic setting. Gangxi Fault Belt experienced intensive Neo-tectonic activities in Cenozoic. Widespread faulted-depressions and strong volcanic eruptions manifested its tec- tonic status of extensional stress field. Mantle uplift caused the movement of magma that carried mantle-derived gases and deep heat flows, the deep-rooted tension faults provided the passages for the gases and heat flows to shallow crust levels.

Tectonic implication of geomorphometric analyses along the Saravan Fault: evidence of a difference in tectonic movements between the Sistan Suture Zone and Makran Mountain Belt

In this paper, remote sensing techniques,as well as field studies, have been used to investigate the geomorphological processes and landscape evolution along the Saravan Fault, SE Iran to highlight how topographic features were influenced by active tectonics. Quantitative geomorphic analysis was carried out using mountain-front sinuosity(Smf),valley floor width-valley height ratio(Vf), drainage basin asymmetry factor(Af), Hypsometric integral(Hi), drainage basin shape index(Bs), mean axial slope of channel(MASC), standard deviation of topography(STD) and index of active tectonic(Iat).Remote sensing techniques, as well as field studies revealed that the Saravan Fault have three parts trending N-S, NW-SE, and E-W. Obtained results show that basins with high Iat index are located at where the strike of the Saravan Faults changes and where several strike-slip faults are crossed the Saravan fault.

Late Paleozoic Element Migration and Accumulation under Intracontinental Sinistral Strike-slip Faulting in the West Junggar Orogenic Belt, NW China

The migration,accumulation and dispersion of elements caused by tectonic dynamics have always been a focus of attention,and become the basis of tectono-geochemistry.However,the effects of faulting,especially strike-slip faulting,on the adjustment of geochemical element distribution,are still not clear.In this paper,we select the West Junggar Orogenic Belt(WJOB),NW China,as a case study to test the migration behavior of elements under tectonic dynamics.The WJOB is dominated by NE-trending large-scale sinistral strike-slip faults such as the Darabut Fault,the Mayile Fault,and the Baerluke Fault,which formed during the intracontinental adjustment under N-S compression during ocean-continental conversion in the Late Paleozoic.Geochemical maps of 13 elements,Al,W,Sn,Mo,Cu,Pb,Zn,As,Sb,Hg,Fe,Ni,and Au,are analyzed for the effects of faulting and folding on element distribution at the regional scale.The results show that the element distribution in the WJOB is controlled mainly by two mechanisms during tectonic deformation:first is the material transporting mechanism,where the movement of geological units is consistent with the direction of tectonic movement;second is the diffusion mechanism,especially by tectonic pressure dissolution driven by tectonic dynamics,where the migration of elements is approximately perpendicular or opposite to the direction of tectonic movement.We conclude that the adjustment of element distributions has been determined by the combined actions of transporting and diffusion mechanisms,and that the diffusion mechanism plays an important role in the formation of geochemical Au blocks in the WJOB.

Excess and Radiogenic Argon in High-Pressure Mylonites of the Tan-Lu Fault Zone, Eastern China

Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the neoformed phengite from ultramylonite give 40Ar/39Ar plateau ages of 209.9±1.8 Ma and 214.3±1.8 Ma, which are interpreted as representing cooling times of the TanLu sinistral faulting, and provide geochronological evidence for the syn-orogenic faulting of the Tan-Lu fault zone. The results show that the phengite formed during the retrograde eclogite-facies mylonitization was not contaminated with excess argon and can be used for dating the deformation. Argon closure in previous K-bearing minerals with excess argon under a retrograde HP dry condition is considered to be the reason for lack of excess argon incorporation in the neoformed phengite. Five porphyroclastic phengite samples yield 40Ar/39Ar plateau ages ranging from 666±12 Ma to 307.1±3.3 Ma, which are interpreted as being contaminated with excess argon. Two mixture samples with plateau ages of 239.4±2.1 Ma and 239.3±2.0 Ma show upward-convex age spectra caused by the mixture of older porphyroclastic phengite with excess argon incorporation and younger neoformed phengite without excess argon incorporation. It is demonstrated that excess argon introduced from the previous UHP metamorphism is still preserved in the pre-existing phengite after the Tan-Lu eclogite-facies mylonitization. The intense deformation under HT and HP conditions cannot erase excess argon in the previous phengite totally due to restricted fluid activities. These porphyroclastic phengite previously contaminated with excess argon cannot be used for dating the later HP deformation. This indicates that deformation under a HP dry condition does not play an important role in removing previous 40Are in phengite.

Characteristics of Compositional Migration in Mylonites from the Ductile Shear Zones of the Southern Tancheng-Lujiang Fault Belt, Eastern Anhui Province

On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.

P-wave velocity structure in the crust and the uppermost mantle of Chao Lake region of the Tan-Lu Fault inferred from teleseismic arrival time tomography

Chao Lake is a Geoheritage site on the active Tan-Lu Fault between the Yangtze craton,the North China craton,and the Dabie orogenic belt in the southeast.This segment of the fault is not well constrained at depth partly due to the overprinting of the fault zone by intrusive materials and its relatively low seismic activity and sparse seismic station coverage.This study took advantage of a dense seismic array deployed around Chao Lake to delineate the P-wave velocity variations in the crust and uppermost mantle using teleseismic earthquake arrival time tomography.The station-pair double-difference with waveform crosscorrelation technique was employed.We used a multiscale resolution 3-D initial model derived from the combination of highresolution 3-D v S models within the region of interest to account for the lateral heterogeneity in the upper crust.The results revealed that the velocity of the upper crust is segmented with structures trending in the direction of the strike of the fault.Sedimentary basins are delineated on both sides of the fault with slow velocities,while the fault zone is characterized by high velocity in the crust and uppermost mantle.The high-velocity structure in the fault zone shows characteristics of magma intrusion that may be connected to the Mesozoic magmatism in and around the Middle and Lower Yangtze River Metallogenic Belt(MLYMB),implying that the Tan-Lu fault might have formed a channel for magma intrusion.Magmatic material in Chao Lake is likely connected to the partial melting,assimilation,storage,and homogenization of the uppermost mantle and the lower crustal rocks.The intrusions,however,seem to have suffered severe regional extension along the Tan-Lu fault driven by the eastward Paleo-Pacific plate subduction,thereby losing its deep trail due to extensional erosion.

RELATIONSHIP BETWEEN P-T CONTITIONS OF TWO PHASES OF TAN-LU STRIKE-SLIP SHEAR ZONES AND DELAMINATION OF OROGENIC BELTS ON THE EASTERN MARGIN OF THE DABIE MOUNTAINS

The Tan-Lu fault zone joins the Dabie Mountains on its eastern margin, and offsets the Dabie and Sulu orogenic belts sinistrally for about 500 kin. On the basis of calculation of temperature and pressure experienced by the two phases of the fault zone as well as the thermo-chronological information on mylonite from the earlier and later Tan-Lu fault zones on the eastern margin of the Dabie Mountains, this paper discusses the delamination history and uplifting magnitudes of the Dabie Mountains from earlier Jurassic to earlier Cretaceous. From mineral assemblages, mineral deformation and muscovite-chlorite geothermometry calculation, it is known that the temperature experienced by the two phases of Tan-Lu fault zones are between 40℃ and 450℃, and the confining pressures are between 0.25Gpa and 0.36GPa for the earlier shear zones and 0.24-0.39GPa for the late shear zones. According to the geobarometry of Si-in-phengite and by considering shear heating and tectonic over-pressure, it is concluded that the maximum formation depths for the two phases of the ductile shear zones are not more than 12 kin. Differential formation depths for the two phases of shear zones are 1-2 km at most. At about 190 Ma and 128 Ma, the Tan-Lu fault zone experienced two phases of cooling events. During this period, the eastem margin of the Dabie Mountains experienced a tectonic calm period and no uplifting. According to information from the Tan-Lu fault zone, the uplifting magnitudes of the Dabie orogenic belts are not more than 12 km during the earlier Cretaceous.

Geoelectrical structures of northern segment of Tan-Lu fault system in China and Russia areas based on magnetotelluric soundings

From China to Russia,Tan-Lu fault system stretches for thousands of kilometers,towards NE 30°.The authors have collected more than ten magnetotelluric profile that China and Russia have carried out,in the studied area of the Tan-Lu fault's northern section,and have analyzed electrical characteristics of the relevant profiles.Deriving the following conclusions:(1)Jiamusi-Bureya plots,etc.,demonstrate the high resistance of Kernel;(2)Fold belt attributed to the land showed high and low resistance stitching,associated with not only terrane accretion,but also upper mantle upwelling;below the sedimentary basin,the resistivity of the upper mantle is lower and closer to the surface comparing with the adjacent area(100-150);(3)In the system of Tan-Lu fracture,Yishu and Dunmi fracture,etc.are expressed as vertical low-resistivity zone;(4)There may exist subducted old-fashioned piece under Jiamusi and Bureya plots.

DEFORMATION CHARACTERISTICS AND ESR DATING OF ANHUA-XUPU FAULT BELT IN THE XUEFENG MOUNATAINS, HUNAN

Anhua-Xupu fault belt plays a very important role in the formation of Xuefeng Mountains. The fault belt shows an arc-structure extruding towards NW. Fault rocks, microstructures and homogeneous temperature (concentrated around 160℃) of fluid inclusions in the quartz veins shows that the fault belt mainly underwent shallow brittle deformation and the highest-grade dynamic metamorphic rock is mylonitized sericite phyllite. The ESR (Electron Spin Resonance) dating from the quartz veins in the fault rocks shows that the fault belt underwent two intense fluid movement stages at Yanshanian (156.9~136.2Ma, 119.8~90.6Ma); moreover not only the occurrence and microstructures but also the homogeneous temperature of the quartz veins developed in that two stages show obvious diversity, which can prove that there exists the reversion period of Mesozoic extension and compression movement of Xuefeng mountains between these two stages .