Characteristics of Compositional Migration in Mylonites from the Ductile Shear Zones of the Southern Tancheng-Lujiang Fault Belt, Eastern Anhui Province

On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.

Geological Evidence and Characteristics of Activity of the Wuhe-Mingguang Section of Tancheng-Lujiang Fault Zone in Late Pleistocene

As the most influential strike-slip fault in East China,the Tancheng-Lujiang fault zone draws scholars attention for its strong seismic activity. Nevertheless,most research has been conducted along segments in Shandong Province and Bohai Bay where huge earthquakes occur frequently. Meanwhile,it is generally believed that segments lying to the south of Huaihe River have been inactive since the late Quaternary and thus it is incapable of generating moderate or strong earthquakes. However,these understandings about the Tancheng-Lujiang fault have been questioned by our recent work for part of the fault south to the Huaihe River. Based on interpretation of high-resolution satellite images,detailed field investigations near Wuhe county and Mingguang City in northern Anhui Province and elaborate microstructure analysis, we come to the conclusion that the Tancheng-Lujiang fault zone mainly consists of four branches and at least one should be active since the late Pleistocene for the Wuhe-Mingguang section. This segment is monopolized by dextral strike-slip motion in late Quaternary. Different from obvious faults in bed rocks or consolidated sediments,the latest activity trace in Quaternary loose sediment revealed by trench excavation is not obvious or even invisible to visual observation. According to our recent work and previous studies, we call for more attention to be paid to invisible faults in young sediment and also suggest that more research be conducted along this seemingly placid segment.

The Geothermal Study of the Mid-Segment of the Tancheng-Lujiang Fault Zone and Its Neighboring Region

In this paper,25 new terrestrial heat flow values newly observed along the mid-segment of the Tancheng-Lujiang fault zone are listed.With these geothermal data and 37 other terrestrial heat flow values(previously published),we describe the distribution features of terrestrial heat flows in the area.In this research,the two-dimensional temperature structure from the surface to lithospheric bottom of the Huaibei-Sixian-Jinhu profile is inferred by using the finite-element method and the temperature and heat flow of sedimentary,granitic,and basaltic layers is calculated.

Characteristic Analysis of Anomalies of Strong Earthquakes along the Tancheng-Lujiang Fault Zone and Both Its Sides

This article made a systematic statistical analysis on the duration,spatial distribution,form,range,type and reliability of precursory anomalies based on the observations of precursors of 24 moderate-strong earthquakes occurring along the Tancheng-Lujiang fault zone and its bilateral areas in Shandong,Liaoning,Hebei,Jiangsu and Jiangxi Provinces in the period from 1966 to 2005. Results show that:( 1) For M7. 0 and M6. 0earthquakes,med-term abnormities are the greatest in number,short-term abnormities come second,and imminent anomalies are the least. For M5. 0 earthquakes,short-term abnormities are often the most in number,imminent anomalies come second,and the med-term ones are the least.( 2) Precursory anomalies are periodical,part of the med and short-term anomalies are shown as short-term and imminent anomalies during their development.( 3) The development of precursor shows quasi-synchronism; the closer to earthquake occurrence time,the more turning changes of anomalies will appear.( 4)Anomalies mainly occur within an epicenter distance of 100 km, showing a relative concentrated distribution in space,and the shorter the distance to epicenter,the higher the anomaly station / item rate.( 5) The spatial distribution of anomalies is relatively correlated to the strike of structures,having a good consistency with the structure.( 6)There is no significant correlation between duration of abnormities and the epicenter distance.( 7) The higher the magnitude of the earthquake,the greater the amplitude of the abnormities measured with the same observation approach.( 8) In terms of the itemsof the observations,fluid abnormities are the greatest in number,followed by deformation and electromagnetism observations.( 9) For all observation items,med and short-term abnormities make up the majority and short-term and imminent anomalies the minority.( 10) In fluid,deformation and electromagnetism observations,fairly reliable anomalies are about double the number of reliable anomalies.

Prehistoric Earthquakes in the Chishan Segment of the Tancheng-Lujiang Fault Zone during the Mid-Late Pleistocene

Chishan is located in Sixian County of Anhui Province, and the west branch fault of Tancheng-Lujiang fault zone passes through here. According to previous research, the Chishan segment of Tancheng-Lujiang fault zone has been obviously active since the Quaternary. Trenches excavated perpendicular to the Chishan segment for this study have revealed many prehistoric earthquake ruins--the multi-phase reverse faulting colluvial wedge, which is represented as the western brick-red sandstone of the late Cretaceous or maize gravel stratum of the mid Pleistocene of the hanging wall of the fault overlapping eastward the mid-late Pleistocene brown clay. In the base of the wedges, steep NW-dipping faults were found, and the steep fault planes turned upward to gently dipping collapse planes. As revealed by the trenches, the connection line of the breaking points strikes NNE in general. Heaving landforms are preserved at most parts of the tailing edge of the hanging wall where the fault passes through, and some EW-trending gullies were offset by right- lateral faulting. The two walls of several trenches have consistently shown that the collapse of traces have been pushed by a west-to-east force. Among them, Tcl - Tc4 show that the brick red limestone （K2 ） overthrust and collapsed on the yellow-brown clay containing ferro-manganese nodules （ Q2r-3 ） ; Tc5 reveals that the yellowish-white gravel （ Q2r ） and the sandstone （K2 ） and overthrust and collapsed on the aforementioned clay. Reverse faulting colluvial wedges are found on both walls of each of the 8 trenches, but the number of wedges revealed in different trenches is different： there is 1 wedge, and 2 wedges in Tcl and Tc3. 3 wedges in Tc2, Tc4 and Tc5, and in individual trenches, few wedges are revealed. This may be related to the trench＇s location, depth and height of theremaining denudation. From the analysis of the trenches and the thermoluminescence dating results, we can preliminarily conclude that multiple large-scale reverse faulting stick events have taken place on the Chishan segment of the Tancheng-Lujiang fault zone during the mid-late Pleistocene, that is to say, many pre-historie strong earthquakes have occurred.

New Evidence of Late Quaternary Activity on the Xinyi-Wuhe Segment of the Tancheng-Lujiang Fault Zone

The Tancheng-Lujiang fault zone has great influence in eastern China. Studies have shown obvious signs of neotectonic activities on the Xinyi-Wuhe segment of the Tancheng-Lujiang fault zone. In this study,on the basis of the previous work,many seismological surveys are made along the Tancheng-Lujiang fault zone and trenches are excavated in key sites.Combined with the analysis of the seismic activities along the fault,the fault movement features and future seismic risk are discussed. Much first-hand information obtained in the paper can provide an important reference value for the study of large earthquake recurrence rules and the mid and long-term earthquake prediction on the Xinyi-Wuhe segment of the Tancheng-Lujiang fault zone.

Gouge stability controlled by temperature elevation and obsidian addition in basaltic faults and implications for moonquakes

Basalt is a major component of the earth and moon crust.Mineral composition and temperature influence frictional instability and thus the potential for seismicity on basaltic faults.We performed velocitystepping shear experiments on basalt gouges at a confining pressure of 100 MPa,temperatures in the range of 100-400℃ and with varied obsidian mass fractions of 0-100%under wet/dry conditions to investigate the frictional strength and stability of basaltic faults.We observe a transition from velocity-neutral to velocity-weakening behaviors with increasing obsidian content.The frictional stability response of the mixed obsidian/basalt gouges is characterized by a transition from velocitystrengthening to velocity-weakening at 200℃ and another transition to velocity-strengthening at temperatures>300℃.Conversely,frictional strengths of the obsidian-bearing gouges are insensitive to temperature and wet/dry conditions.These results suggest that obsidian content dominates the potential seismic response of basaltic faults with the effect of temperature controlling the range of seismogenic depths.Thus,shallow moonquakes tend to occur in the lower lunar crust due to the corresponding anticipated higher glass content and a projected temperature range conducive to velocity-weakening behavior.These observations contribute to a better understanding of the nucleation mechanism of shallow seismicity in basaltic faults.

Characterization and spatial analysis of coseismic landslides triggered by the Luding Ms 6.8 earthquake in the Xianshuihe fault zone, Southwest China

On September 5, 2022, a magnitude Ms 6.8 earthquake occurred along the Moxi fault in the southern part of the Xianshuihe fault zone located in the southeastern margin of the Tibetan Plateau,resulting in severe damage and substantial economic loss. In this study, we established a coseismic landslide database triggered by Luding Ms 6.8 earthquake, which includes 4794 landslides with a total area of 46.79 km^(2). The coseismic landslides primarily consisted of medium and small-sized landslides, characterized by shallow surface sliding. Some exhibited characteristics of high-position initiation resulted in the obstruction or partial obstruction of rivers, leading to the formation of dammed lakes. Our research found that the coseismic landslides were predominantly observed on slopes ranging from 30° to 50°, occurring at between 1000 m and 2500 m, with slope aspects varying from 90° to 180°. Landslides were also highly developed in granitic bodies that had experienced structural fracturing and strong-tomoderate weathering. Coseismic landslides concentrated within a 6 km range on both sides of the Xianshuihe and Daduhe fault zones. The area and number of coseismic landslides exhibited a negative correlation with the distance to fault lines, road networks, and river systems, as they were influenced by fault activity, road excavation, and river erosion. The coseismic landslides were mainly distributed in the southeastern region of the epicenter, exhibiting relatively concentrated patterns within the IX-degree zones such as Moxi Town, Wandong River basin, Detuo Town to Wanggangping Township. Our research findings provide important data on the coseismic landslides triggered by the Luding Ms 6.8 earthquake and reveal the spatial distribution patterns of these landslides. These findings can serve as important references for risk mitigation, reconstruction planning, and regional earthquake disaster research in the earthquake-affected area.

Dynamic Vision Enabled Contactless Cross-Domain Machine Fault Diagnosis With Neuromorphic Computing

Dear Editor,This letter presents a novel dynamic vision enabled contactless cross-domain fault diagnosis method with neuromorphic computing.The event-based camera is adopted to capture the machine vibration states in the perspective of vision.

Autonomous Recommendation of Fault Detection Algorithms for Spacecraft

Dear Editor, This letter deals with the problem of algorithm recommendation for online fault detection of spacecraft. By transforming the time series data into distributions and introducing a distribution-aware measure, a principal method is designed for quantifying the detectabilities of fault detection algorithms over special datasets.

Motion and Deformation State of the Tancheng-Lujiang Fault Zone Derived from GPS Data

Based on the rotation in the entire block and homogeneous strain model ( REHSM) ,we firstly analyze the motion and deformation features across the southern part of Tancheng- Lujiang fault zone from GPS velocity fields in period of 1999 ～ 2001,2001 ～ 2004,2004 ～ 2007 and 2007 ～ 2009. The results show a dextral strike-slip feature in the Weifang- Tancheng segment and sinistral strike-slip in the Tancheng-Lujiang segment. And the deformation perpendicular to the Tancheng-Lujiang fault zone alternates between tension and compression in different time-intervals. Then we resolve the relative rigid motion of blocks around Bohai Bay to the Circum-Bohai Sea area by deducting the entire rigid motion of the Circum-Bohai Sea area. We find that the Yanshan-Bohai seismic belt split this area into two parts,the northern part moving NW,and the other SE.

The MW5.5 earthquake on August 6,2023,in Pingyuan,Shandong,China:A rupture on a buried fault

On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no active fault had been previously identified.This study collects 1309 P-wave arrival times and 866 S-wave arrival times from 74 seismic stations less than 200 km to the epicenter to constrain the spatial distribution of the mainshock and its 125 early aftershocks by the double difference earthquake relocation method,and selects 864 P-waveforms from 288 stations located within 800 km of the epicenter to constrain the focal mechanism solution of the mainshock through centroid moment tensor inversion.The relocation and the inversion indicate,the Pingyuan MW5.5 earthquake was caused by a rupture on a buried fault,likely an extensive segment of the Gaotang fault.This buried fault exhibited a dip of approximately 75°to the northwest,with a strike of 222°,similar to the Gaotang fault.The rupture initiated at the depth of 18.6 km and propagated upward and northeastward.However,the ground surface was not broken.The total duration of the rupture was~6.0 s,releasing the scalar moment of 2.5895×1017 N·m,equivalent to MW5.54.The moment rate reached the maximum only 1.4 seconds after the rupture initiation,and the 90%scalar moment was released in the first 4.6 s.In the first 1.4 seconds of the rupture process,the rupture velocity was estimated to be 2.6 km/s,slower than the local S-wave velocity.As the rupture neared its end,the rupture velocity decreased significantly.This study provides valuable insights into the seismic characteristics of the Pingyuan MW5.5 earthquake,shedding light on the previously unidentified buried fault responsible for the seismic activity in the region.Understanding the behavior of such faults is crucial for assessing seismic hazards and enhancing earthquake preparedness in the future.

Deep- Seated Tectonic Activation of Tancheng-Lujiang Fault Zone and Its Control over Jiaodong Gold Concentrated Region, China

A comprehensive discussion on the deep seated genesis of gold metallogenic materials and the tectono magmatic controls over gold deposits is given in this paper, which is based on the crustal and upper mantle structural characteristics of the Jiaodong massif, the property, activation history and styles of the Tancheng Lujiang fault zone, as well as a series of accompanying tectono magmatic events. Prediction for further prospecting gold deposits in the area is also made.

Instability mechanism of mining roadway passing through fault at different angles in kilometre-deep mine and control measures of roof cutting and NPR cables

The angle α between the fault strike and the axial direction of the roadway produces different damage characteristics. In this paper, the research methodology includes theoretical analyses, numerical simulations and field experiments in the context of the Daqiang coal mine located in Shenyang, China. The stability control countermeasure of "pre-splitting cutting roof + NPR anchor cable"(PSCR-NPR) is simultaneously proposed. According to the different deformation characteristics of the roadway, the faults are innovatively classified into three types, with α of type I being 0°-30°, α of type II being 30°-60°, and α of type III being 60°-90°. The full-cycle stress evolution paths during mining roadway traverses across different types of faults are investigated by numerical simulation. Different pinch angles α lead to high stress concentration areas at different locations in the surrounding rock. The non-uniform stress field formed in the shallow surrounding rock is an important reason for the instability of the roadway. The pre-cracked cut top shifted the high stress region to the deep rock mass and formed a low stress region in the shallow rock mass. The high prestressing NPR anchor cable transforms the non-uniform stress field of the shallow surrounding rock into a uniform stress field. PSCR-NPR is applied in the fault-through roadway of Daqiang mine. The low stress area of the surrounding rock was enlarged by 3-7 times, and the cumulative convergence was reduced by 45%-50%. It provides a reference for the stability control of the deep fault-through mining roadway.

Step-over of strike-slip faults and overpressure fluid favor occurrence of foreshocks:Insights from the 1975 Haicheng fore-main-aftershock sequence,China

This study analyzed and summarized in detail the spatial and temporal distributions of earthquakes,tidal responses,focal mechanisms,and stress field characteristics for the M 7.3 Haicheng earthquake sequence in February 1975.The foreshocks are related to the main fault and the conjugate faults surrounding the extension step-over in the middle.The initiation timing of the foreshock clusters and the original time of the mainshock were clearly modulated by the Earth's tidal force and coincided with the peak of dilational volumetric tidal strain.As a plausible and testable hypothesis,we proposed a fluid-driven foreshock model,by which all observed seismicity features can be more reasonably interpreted with respect to the results of existing models.Together with some other known examples,the widely existing step-over along strike-slip faults and associated conjugate faults,especially for extensional ones in the presence of deep fluids,favor the occurrence of short-term foreshocks.Although clustered seismicity with characteristics similar to those of the studied case is not a sufficient and necessary condition for large earthquakes to occur under similar tectonic conditions,it undoubtedly has a warning significance for the criticality of the main fault.Subsequent testing would require quantification of true/false positives/negatives.

Expert Experience and Data-Driven Based Hybrid Fault Diagnosis for High-SpeedWire Rod Finishing Mills

The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.

Label Recovery and Trajectory Designable Network for Transfer Fault Diagnosis of Machines With Incorrect Annotation

The success of deep transfer learning in fault diagnosis is attributed to the collection of high-quality labeled data from the source domain.However,in engineering scenarios,achieving such high-quality label annotation is difficult and expensive.The incorrect label annotation produces two negative effects:1)the complex decision boundary of diagnosis models lowers the generalization performance on the target domain,and2)the distribution of target domain samples becomes misaligned with the false-labeled samples.To overcome these negative effects,this article proposes a solution called the label recovery and trajectory designable network(LRTDN).LRTDN consists of three parts.First,a residual network with dual classifiers is to learn features from cross-domain samples.Second,an annotation check module is constructed to generate a label anomaly indicator that could modify the abnormal labels of false-labeled samples in the source domain.With the training of relabeled samples,the complexity of diagnosis model is reduced via semi-supervised learning.Third,the adaptation trajectories are designed for sample distributions across domains.This ensures that the target domain samples are only adapted with the pure-labeled samples.The LRTDN is verified by two case studies,in which the diagnosis knowledge of bearings is transferred across different working conditions as well as different yet related machines.The results show that LRTDN offers a high diagnosis accuracy even in the presence of incorrect annotation.

Analysis of faulting destruction and water supply pipeline damage from the first mainshock of the February 6,2023 Türkiye earthquake doublet

In 2023,two consecutive earthquakes exceeding a magnitude of 7 occurred in Türkiye,causing severe casualties and economic losses.The damage to critical urban infrastructure and building structures,including highways,railroads,and water supply pipelines,was particularly severe in areas where these structures intersected the seismogenic fault.Critical infrastructure projects that traverse active faults are susceptible to the influence of fault movement,pulse velocity,and ground motions.In this study,we used a unique approach to analyze the acceleration records obtained from the seismic station array(9 strong ground motion stations)located along the East Anatolian Fault(the seismogenic fault of the MW7.8 mainshock of the 2023 Türkiye earthquake doublet).The acceleration records were filtered and integrated to obtain the velocity and displacement time histories.We used the results of an on-site investigation,jointly conducted by China Earthquake Administration and Türkiye’s AFAD,to analyze the distribution of PGA,PGV,and PGD recorded by the strong motion array of the East Anatolian Fault.We found that the maximum horizontal PGA in this earthquake was 3.0 g,and the maximum co-seismic surface displacement caused by the East Anatolian Fault rupture was 6.50 m.As the fault rupture propagated southwest,the velocity pulse caused by the directional effect of the rupture increased gradually,with the maximum PGA reaching 162.3 cm/s.We also discussed the seismic safety of critical infrastructure projects traversing active faults,using two case studies of water supply pipelines in Türkiye that were damaged by earthquakes.We used a three-dimensional finite element model of the PE(polyethylene)water pipeline at the Islahiye State Hospital and fault displacement observations obtained through on-site investigation to analyze pipeline failure mechanisms.We further investigated the effect of the fault-crossing angle on seismic safety of a pipeline,based on our analysis and the failure performance of the large-diameter Thames Water pipeline during the 1999 Kocaeli earthquake.The seismic method of buried pipelines crossing the fault was summarized.

Path-Following Control With Obstacle Avoidance of Autonomous Surface Vehicles Subject to Actuator Faults

This paper investigates the path-following control problem with obstacle avoidance of autonomous surface vehicles in the presence of actuator faults,uncertainty and external disturbances.Autonomous surface vehicles inevitably suffer from actuator faults in complex sea environments,which may cause existing obstacle avoidance strategies to fail.To reduce the influence of actuator faults,an improved artificial potential function is constructed by introducing the lower bound of actuator efficiency factors.The nonlinear state observer,which only depends on measurable position information of the autonomous surface vehicle,is used to address uncertainties and external disturbances.By using a backstepping technique and adaptive mechanism,a path-following control strategy with obstacle avoidance and fault tolerance is designed which can ensure that the tracking errors converge to a small neighborhood of zero.Compared with existing results,the proposed control strategy has the capability of obstacle avoidance and fault tolerance simultaneously.Finally,the comparison results through simulations are given to verify the effectiveness of the proposed method.

Deep-large faults controlling on the distribution of the venting gas hydrate system in the middle of the Qiongdongnan Basin, South China Sea

Many locations with concentrated hydrates at vents have confirmed the presence of abundant thermogenic gas in the middle of the Qiongdongnan Basin(QDNB).However,the impact of deep structures on gasbearing fluids migration and gas hydrates distribution in tectonically inactive regions is still unclear.In this study,the authors apply high-resolution 3D seismic and logging while drilling(LWD)data from the middle of the QDNB to investigate the influence of deep-large faults on gas chimneys and preferred gasescape pipes.The findings reveal the following:(1)Two significant deep-large faults,F1 and F2,developed on the edge of the Songnan Low Uplift,control the dominant migration of thermogenic hydrocarbons and determine the initial locations of gas chimneys.(2)The formation of gas chimneys is likely related to fault activation and reactivation.Gas chimney 1 is primarily arises from convergent fluid migration resulting from the intersection of the two faults,while the gas chimney 2 benefits from a steeper fault plane and shorter migration distance of fault F2.(3)Most gas-escape pipes are situated near the apex of the two faults.Their reactivations facilitate free gas flow into the GHSZ and contribute to the formation of fracture‐filling hydrates.