Interfacial modification using the cross-linkable tannic acid for highly-efficient perovskite solar cells with excellent stability

Although the performance of perovskite solar cells(PSCs)has been dramatically increased in recent years,stability is still the main obstacle preventing the PSCs from being commercial.PSC device instability can be caused by a variety of reasons,including ions diffusion,surface and grain boundary defects,etc.In this work,the cross-linkable tannic acid(TA)is introduced to modify perovskite film through post-treatment method.The numerous organic functional groups(–OH and C=O)in TA can interact with the uncoordinated Pb^(2+)and I^(-)ions in perovskite,thus passivating defects and inhibiting ions diffusion.In addition,the formed TA network can absorb a small amount of the residual moisture inside the device to protect the perovskite layer.Furthermore,TA modification regulates the energy level of perovskite,and reduces interfacial charge recombination.Ultimately,following TA treatment,the device efficiency is increased significantly from 21.31%to 23.11%,with a decreased hysteresis effect.Notably,the treated device shows excellent air,thermal,and operational stability.In light of this,the readily available,inexpensive TA has the potential to operate as a multipurpose interfacial modifier to increase device efficiency while also enhancing device stability.

Effects of tannic acid on the immunity and intestinal health of broiler chickens with necrotic enteritis infection

Background In broiler chickens,necrotic enteritis(NE)infection can reduce production performance.Tannic acid has shown great potential as a treatment of NE in broilers.However,the appropriate dosage of tannic acid in NE of broilers and the improvement effect on intestinal health are not very clear.In this study,we aimed to investigate the effects of different doses of tannic acid on the production performance,immunity,and intestinal health of broilers by constructing an NE model with C.perfringens infection and determining the appropriate dosage of tannic acid with regard to NE.Results Challenged birds showed significant reduction in body weight,villus height,and the ratio of villus height to crypt depth(P<0.05)and increase in the feed consumption gain ratio,intestinal lesion score,and crypt depth(P<0.05).The infection significantly reduced the relative Bacteroidota and Ligilactobacillus abundance(P<0.05)and increased the ratio of Firmicutes/Bacteroidota and cecal content of C.perfringens(P<0.05).Challenged birds fed diets supplemented with tannic acid showed significantly increased mRNA expression of nutrient transport carriers and intestinal barrier genes and growth performance and reduced serum zonulin and endotoxin levels(P<0.05).Addi-tion of tannic acid to the diet inhibited the inflammatory response by reducing the number of coccidia oocysts in feces and the content of C.perfringens in the cecum.Specifically,tannic acid reduced the serum levels of C reactive protein,myeloperoxidase,and specific IgY and ileal mucosal secretory immunoglobulin A levels in the ileal mucosa compared with those in the NE-infected birds.NE-infected birds fed diets supplemented with tannic acid also showed significantly increased relative Anaerocolumna,Thermoanaerobacterium,and Thermosinus abundance(P<0.05);their microbial composition and functional predictions were similar to those of the NC group.Conclusions Tannic acid in the diet alleviated NE by enhancing the intestinal barrier and absorption function.The recommended dietary tannic acid additive level is 500–750 mg/kg.Our study findings would be useful in reducing related economic losses in the broiler industry.

Tannic acid/Fe^(3+)interlayer for preparation of high-permeability polyetherimide organic solvent nanofiltration membranes for organic solvent separation

Organic solvent nanofiltration(OSN)membranes have a great application prospect in organic solvent separation,but the development of OSN membranes is mainly restricted by trade-off between permeability and rejection rate.In this work,a TA/Fe^(3+)polymer was introduced into polyetherimide(PEI)ultrafiltration membranes crosslinked with hexamethylene diamine as the intermediate layer,and OSN membranes with high separation performance and solvent permeability were obtained through interfacial polymerization and solvent activation.The interlayer with high surface hydrophilicity and a fixed pore structure controlled the adsorption/diffusion of the amine monomer during interfacial polymerization,forming a smooth(average surface roughness<5.5 nm),ultra-thin(separation layer thickness reduced from 150 to 16 nm)and dense surface structure polyamide(PA)layer.The PA-Fe^(3+)_3-HDA/PEI membrane retained more than 94%of methyl blue(BS)in 0.1 g·L^(-1)BS ethanol solution at 0.6 MPa,and the ethanol permeation reached 28.56 L^(-1)·m^(-2)·h^(-1).The average flux recovery ratio(FRR)of PA-Fe^(3+)_(3)-HDA/PEI membrane was found to be 84%,which has better fouling resistance than PA-HDA/PEI membrane,and it was found to have better stability performance through different solvent immersion experiments and continuous operation in 0.1 g·L^(-1)BS ethanol solution.Compared with thin-film composite nanofiltration membranes,the PA-Fe^(3+)_(3)-HDA/PEI membrane can be manufactured from an economical and environment-friendly method and overcomes the trade-off between permeability and rejection rate,showing great application potential in organic solvent separation systems.

One-step crosslinking preparation of tannic acid particles for the adsorption and separation of cationic dyes

In this study,a new tannic acid adsorbent(ethylene glycol diglycidyl ether crosslinked tannic acid,TAEGDE)for adsorptive removal of dyes from water was prepared using EGDE as a cross-linking agent.The resultant TA-EGDE was in particulate form with rough surface morphology and a diameter ranging from 10 to 30μm.The adsorption performance of the TA-EGDE was evaluated in a flow-through mode using water samples contaminated with methylene blue(MB)and two-component mixed dyes,respectively.The TA-EGDE provided adsorption capacity up to 721.8 mg·g^(-1)at 65°C for MB.It showed a high removal efficiency(99%)of MB(50 mg·L^(-1))from the water sample and could recovery 90%of the adsorbed MB by eluting with acidic ethanol aqueous solution.The excellent adsorption of MB and neutral red on the TA-EGDE may be the result of the synergy of electrostatic interaction andπ-πinteraction.Furthermore,the TA-EGDE could separate dyes from water samples contaminated with twocomponent mixed dyes with a separation coefficient ranging from 1.8 to 36.5.The anionic TA-EGDE would be an effective adsorbent to remove and recycle dyes from the contaminated water.

Selective hydrogenation of glucose to sorbitol with tannic acid-based porous carbon sphere supported Ni-Ru bimetallic catalysts

Ni-Ru bimetallic porous carbon sphere(Ni-Ru@PCS) catalysts were synthesized via formaldehyde-assisted, metal-coordinated crosslinking sol-gel chemistry, in which biomass-derived tannic acid and F127 surfactant were used as carbon precursor and soft template, respectively, and Ni2+and Ru3+were used as cross-linkers. In the developed method, Ni-Ru particles became uniformly dispersed in the carbon skeleton due to strong coordination bonds between metal ions(Ni2+and Ru^(3+)) and tannic acid molecules and bimetal interactions. The as-synthesized Ni-Ru10:1@PCS catalyst with a loading Ni:Ru mole ratio of 10:1 was applied for the selective hydrogenation of glucose to sorbitol, and provided 99% glucose conversion with a sorbitol selectivity of 100% at 140℃ in 150 min reaction time and exhibited good stability and recyclability in which sorbitol yield remained at 98% after 4 cycles with little or no metal agglomeration. The catalyst was applied to glucose solutions as high as 20 wt% with 97% sorbitol yields being obtained at 140℃ in 20 h. The developed bimetallic porous carbon sphere catalysts take advantage of sustainably-derived materials in their structure and are applicable to related biomass conversion reactions.

Cerium-tannic acid passivation treatment on galvanized steel

A novel cerium-tannic acid passivation treatment was performed on galvanized steel. The corrosion resistance of cerium-tannic passivated samples was tested by dropping test with 0.5 wt.% CuSO4 aqueous solution. The mass loss per unit area of passivated samples was measured after the corrosion in 0.5 mol/L NaCl ＋ 0.005 mol/L H2SO4 at room temperature for 96 h. The electrochemical behaviors of cerium, tannic acid, and cerium-tannic acid passivated samples on galvanized steel in 0.5 mol/L NaCl solution were investigated by polarization curves and electrochemical impendence spectra. The corrosion equivalent circuit was established according to the impedance characteristics. The results show that cerium-tannic acid treated samples exhibit better corrosion resistance than the sole cerium or tannic acid treated samples under the same condition. The mechanism of synergistic effect for cerium-tannic acid passivation on galvanized steel was discussed.

Enhanced removal of organics by permanganate preoxidation using tannic acid as a model compound-Role of in situ formed manganese dioxide

The effect of permanganate preoxidation on organic matter removal during the coagulation with aluminum chloride was investigated using tannic acid as a model compound. Results showed that a small amount of KMnO4 （0.75 mg/L） increased the removal efficiency of tannic acid up to 20%, as compared to the process of coagulation by aluminum chloride alone. The key factor enhancing the removal efficiency of tannic acid in preoxidation process was the in situ formation of a reductant manganese dioxide. The complexation model was used to describe the reaction between MnO2 and tannic acid. Under weak pH condition, tannic acid was difficult to be adsorbed by MnO2 due to the static electrical repulsive forces. The presence of Ca2＋ served as a bridge to hold the negative charged MnO2 and tannic acid together, which could be a crucial factor influencing tannic acid adsorption by in-situ manganese dioxide.

ADSORPTION STUDIES OF TANNIC ACID BY COMMERCIAL ESTER RESIN XAD-7

Tannic acid and its related compounds are known as refractory organic pollutants, and it can create serious problems for the environment. The adsorption and desorption studies of tannic acid on commercial resins XAD-7 and D-201 are performed, and all data indicates resin XAD-7 can be used as an effective adsorbent for removing tannic acid during water/wastewater treatment. Furthermore, adsorption thermodynamics studies indicate different adsorption mechanisms for TA on XAD-7 and D-201. FT-IR and solid state 13C-NMR spectroscopy are used to explain the adsorption force between XAD-7 and TA. It suggests that hydrogen bonding is the main adsorption force for TA. Finally, XAD-7＇s adsorption capacity in the presence of different metal ions is investigated, which indicates that heavy metal ions in solutions can decrease the adsorption capacity for TA on ester resin XAD-7.

Tannic acid prevents post-weaning diarrhea by improving intestinal barrier integrity and function in weaned piglets

Background:Tannic acid(TA)is potential to reduce diarrhea in weaning pigs,but knowledge about the influence of TA on intestinal barrier integrity and function is still scarce.This experiment was conducted to investigate the effects of dietary TA supplementation on growth performance,diarrhea rate,intestinal barrier integrity and function of weaned pigs.Methods:A total of 108 crossbred(Duroc×Landrace×Yorkshire)piglets,with an initial average body weight of 6.60±0.27 kg,were allotted to 3 groups(6 pigs/pen and 6 replicates/group)in a randomized complete block design according to their gender and body weight.Piglets were fed the basal diet with 0(control,CON),0.2%and 1.0%TA,respectively.The trial lasted for 28 d.Results:Compared with the CON group,dietary 0.2%and 1.0%TA supplementation didn’t affect ADFI,ADG and F:G(P>0.05),but reduced diarrhea rate,diarrhea index and diarrhea score of piglets(P<0.05),reduced diamine oxidase(DAO)activity and D-lactic acid concentration in serum(P<0.01).The higher occludin expression and localization were observed in the duodenum,jejunum and ileum after supplementation with 0.2%or 1.0%TA(P<0.05).Adding 0.2%TA to diet significantly decreased crypt depth,increased villus height/crypt depth ratio in the duodenum(P<0.05),and dietary 1.0%TA tended to decrease crypt depth(P<0.10)and significantly decreased villus height(P<0.05)of the ileum.Moreover,lower malondialdehyde content in the ileum was detected in the pigs fed 1.0%TA(P<0.05).In the duodenum,both 0.2%and 1.0%TA groups had higher occludin(OCLN)mRNA and 0.2%TA group had higher zonula occludens-2(ZO-2)level(P<0.05).Meanwhile,dietary 1.0%TA supplementation tended to up-regulate OCLN mRNA levels in the jejunum(P<0.10)and 0.2%TA supplementation tended to up-regulate zonula occludens-1(ZO-1)mRNA levels in the ileum(P<0.10).Conclusion:In conclusion,dietary supplementation of 0.2%or 1.0%TA could effectively alleviate postweaning diarrhea without altering growth performance in weaned piglets,which might be achieved by improving intestinal barrier integrity and function.

Novel Bio-based Flame Retardant Systems Derived from Tannic Acid

In this study,tannic acid(TA)was investigated as flame retardant agent for PLA.Different strategies to modify its thermal degradation pathway have been explored in order to improve its charring effect.The first one consists in combining TA with organomodified montmorillonite(oMMT),and enables limiting the thermo-oxidative degradation of TA and promoting the formation of an effective char layer.Flame-retardant(FR)behavior of PLA-based composition has been found to be positively impacted by this combination since a reduction of the peak of Heat Release Rate(PHRR),more important than the value recorded when oMMT and tannic acid are used separately,has been obtained.The second strategy,in which tannic acid was associated with a biosourced phosphorousbased compounds,i.e.metallic phytate salt,evidenced another alternative allowing enhancing TA flame retardant effect at 30 wt%loading content.The third and last strategy explored aims to chemically modify TA via a chemical grafting of phosphoric acid groups.This phosphorylated TA was shown to present the most effective flame-retardant(FR)effect.However,an important reduction of PLA molecular weight was observed.

STUDY ON SOLUTION CHEMISTRY BETWEEN TANNIC ACID AND THE FLOTATION PULP OF WOLLASTONITE AND DIOPSIDE

The mechanisms of interaction between tannic acid and calcium ions either added externally to or inherently present in the (?)olution ( dissociated from mineral surface ) , are studied by the use of Inductively Coupled Plasma Atomic Emission Spectroscopy ( ICP-AES ) , Ultraviolet Spectroscopy (UV). It is found that wollastonite has a high solubility in the concentration of calcium ions, calcium ions are able to interact with tannic acid.

Adsorption and Desorption Behavior of Tannic Acid in Aqueous Solution on Polyaniline Adsorbent

Tannic acid is generally considered as one of polyphenolic pollutants, which may cause severe threats to the environment. In this study, polyaniline adsorbent was synthesized by chemical oxidation to remove tannic acid in aqueous solutions. The adsorption amount of tannic acid varied greatly with pH of solution and strong adsorption was at pH 5.8-6.7. Coexisting cations, such as Na+, K+, and Ca2+, can enhance the adsorption of tannic acid on poly-aniline, which may be contributed to the electrostatic interaction between tannic acid and polyaniline. The adsorp-tion process could be well described by Langmuir model and the maximum adsorption capacity was 117.65 mg·g-1 at 35 ℃ and pH 6.0. The thermodynamic parameters calculated from the adsorption isotherms indicate that the ad-sorption of tannic acid is spontaneous and endothermic process. The polyaniline saturated with tannic acid can be desorbed in alkaline solution and regenerated adsorbent can be used repeatedly with high adsorption capacity, which implies that polyaniline adsorbents have a great potential in water purification for the removal of tannic acid.

Aluminum potassium sulfate and tannic acid sclerotherapy for Goligher Grades Ⅱ and Ⅲ hemorrhoids: Results from a multicenter study

AIM: To show that aluminum potassium sulfate and tannic acid(ALTA) sclerotherapy has a high success rate for Grade Ⅱ and Ⅲ hemorrhoids.METHODS: This study was based on the clinical data of 604 patients with hemorrhoids who underwent ALTA sclerotherapy between January 2009 and February 2015. The objective of this study was to assess the efficacy of this treatment for Grades Ⅱ and Ⅲ hemorrhoids. Preoperative and postoperative symptoms, complications and success rate were all assessed retrospectively. Follow-up consisted of a simple questionnaire, physical examination and an anoscopy. Patients were followed-up at one day, one week, two weeks, one month, one year, two years, three years, four years and five years after the ALTA sclerotherapy.RESULTS: One hundred and sixty-nine patients were diagnosed with Grade Ⅱ hemorrhoids and 435 patients were diagnosed with Grade Ⅲ hemorrhoids. The one year, three year and five year cumulative success rates of ALTA sclerotherapy for Grades Ⅱ and Ⅲ hemo-rrhoids were 95.9% and 93.1%; 89.3% and 83.7%; and 89.3% and 78.2%, respectively. No significant differences were observed in the cumulative success rates after ALTA sclerotherapy between Grades Ⅱ and Ⅲ hemorrhoids(P = 0.09). There were forty-seven post-operative complications(low grade fever; anal pain; urinary retention; rectal ulcer; and others). No serious or life-threatening complications occurred and all cases improved through conservative treatment. At univariate analysis there were no predictive factors of failure.CONCLUSION: ALTA sclerotherapy has had a high success rate for Grade Ⅱ and Ⅲ hemorrhoids during five years of post-operative treatment. However, additional studies are needed to evaluate the efficacy of this ALTA sclerotherapy in the management of hemorrhoidal disease.

Liver injury after aluminum potassium sulfate and tannic acid treatment of hemorrhoids

We are reporting a rare case of acute liver injury that developed after an internal hemorrhoid treatment with the aluminum potassium sulfate and tannic acid(ALTA) regimen. A 41-year-old man developed a fever and liver injury after undergoing internal hemorrhoid treatment with a submucosal injection of ALTA with lidocaine. The acute liver injury was classified clinically as hepatocellular and pathologically as cholestastic. We could not classify the mechanism of injury. High eosinophil and immunoglobulin E levels characterized the injury,and a drug lymphocyte stimulation test was negative on postoperative day 25. Fluid replacement for two weeks after hospitalization improved the liver injury. ALTA therapy involves injecting chemicals into the submucosa,from the rectum to the anus,and this is the first description of a case that developed a severe liver disorder after this treatment; hence,an analysis of future cases as they accumulate is desirable.

Size Variation of Gold Nanoparticles Synthesized Using Tannic Acid in Response to Higher Chloroauric Acid Concentrations

The size evolution of gold nanoparticles synthesized using tannic acid with initial gold chloride concentrations ranging from 0.2 - 2 mM at various tannic acid to chloroauric acid molar ratios (ranging from 2:1 to 12:1) has been analysed. Dynamic light scattering spectroscopic and tramission electron microscopic analyses were performed to assess the size of formed gold nanoparticles. Two different patterns of nanoparticle size evolution were obtained;the size evolution trend below 1 mM chloroauric acid concentration was found to be different from the one obtained at gold chloride concentrations higher than or equal to 1 mM. In case of sizes obtained for less than 1 mM gold chloride concentration, a general decrease in particle size was observed with increase in gold salt concentration. On the contrary, for the particles synthesised using chloroauric acid concentrations higher than or equal to 1 mM, with increase in gold salt concentration, a general increase in nanoparticle diameter was seen. For the molarities 0.2 and 0.5 mM, with increase in tannic acid/ chloroauric acid ratios, first the size decreases and then increases and finally reaches saturation. Particles formed at molarities greater than equal to 1 mM do not exhibit plateaux in their size rather initially decrease and then increase in response to increasing tannic acid/chloroauric acid ratios except for 2 mM concentration at which a small saturation is observed. The findings enumerate that higher gold chloride concentrations leave a significant impact on the sizes of gold nanaparticles obtained using tannic acid as a reducing agent of chloroauric acid solution.

Development of Preparation Method for Microencapsulating Uycalyptus Oil Containing Fine Aqueous Droplets by Use of Interfacial Condensation Reaction between Hydroxy Propyl Methyl Cellulose and Tannic Acid

It was tried to develop the preparation method for microencapsulating the uycalyptus oil containing fine aqueous droplets by using the interfacial condensation reaction between hydroxyl propyl methyl cellulose and tannic acid. Uycalyptus oil containing fine aqueous droplets was dispersed in the continuous water phase to form the (W/O)/W emulsion. Tannic acid and hydroxyl propyl methyl cellulose were dissolved in the inner aqueous droplets and in the outer continuous water phase, respectively. Tannic acid transferred through the oil phase from the inner water droplets to the interface between the oil phase and the continuous water phase and then, reacted with hydroxyl propyl methyl cellulose. In the experiment, the concentrations of hydroxyl propyl methyl cellulose and tannic acid were mainly changed stepwise. The uycalyptus oil containing the fine water droplets could be microencapsulated satisfactorily. It was found that the microcapsules were composed of the gelated hydroxyl propyl methyl cellulose film as the shell, the fine aqueous droplets as the first core and the oil droplet as the second core.

Effects of Beverage Ingredients on Salivary Fluid Secretion with an <i>ex Vivo</i>Submandibular Gland Perfusion System: Tannic Acid as a Key Component for the Inhibition of Saliva Secretion

Tannic acid (TA) and TA containing beverage have been proved to inhibit Ca2+-activated Cl- channel located apical membrane of the secretory cells. However, their effect on salivary fluid secretion is not well investigated. We used mouse ex Vivo submandibular gland perfusion technique to identify the general effect of TA and related beverage samples on muscarinic agonist carbachol induced fluid secretion. Green tea inhibited fluid secretion by 64% from the control, where oolong tea was by 53%, and red wine by 43% which was linked with their TA concentration. On the other hand, though TA was contained at 4.7 μM in white wine sample and 33 μM in coffee extract, no adverse effect was observed. In addition, coffee induced salivation in the absence of carbachol. TA had a negative effect on fluid secretion with a concentration dependent manner. The effects of TA on carbachol induced calcium increase showed identical as fluid secretion, which was initially no effect, and then gradually decreased over the time. These results demonstrate that TA directly inhibits the salivary fluid secretion and it affects not only Ca2+-activated Cl- channel but also intracellular Ca2+ increasing mechanisms.

Effects of Tannic Acid on Active Aluminum Species Distribution in Various Tea Soils

Effects of tannic acid on active aluminum species distribution in different pH tea soils in Yunnan and Jiangxi tea gardens were studied by field observation and laboratory analysis.There were 4 species of active aluminum in the tea soil,i.e.,exchangeable aluminum Al3 +,unimer hydroxyl aluminum Al(OH)2 +Al(OH)+2,acid-soluble aluminum Al(OH)03and humic-acid aluminum Al-HA.Experimental results showed that tannic acid at levels 0 ~0.4 mmol/kg and 0 ~ 2.0 mmol/kg,with the rising of soil pH value,the content of exchangeable aluminum decreased significantly,hydroxyl aluminum,acid-soluble aluminum and humic-acid aluminum were increased gently.When the concentration of tannic acid increased to above 2.0 mmol/kg,the inhibition of higher concentration of tannic acid on content of active aluminum was strengthened with the rising of soil pH value and variation law of 20 ~ 40 cm soil layer was similar to 0 ~ 20cm soil layer.Generally speaking,the content of active aluminum in upper layer of soil were more than subsoil and total content of active aluminum in Yunnan tea soils were higher than Jiangxi tea soils.The correlation analysis showed that the soil pH were positively correlated with hydroxyl aluminum,humic-acid aluminum,pHBC(r = 0.796,0.960,0.852;p < 0.01,0.01,0.01) in 0 ~ 20cm soil layer.pHBC were significant negative correlated with exchangeable aluminum(r =- 904,p < 0.01),hydroxyl aluminum(r =- 645,p < 0.05),and with humic-acid aluminum have a positive correlation,correlation coefficient was0.795(P < 0.05).Meanwhile,the tannic acid addition concentration were 0 ~ 0.4 mmol/kg soils pH were increased significantly,while samples attains a peak pH value afterwards decrease continuously,the relationship between the pH and the concentration of tannic acids accords with the equation:Y pH=- 0.04C DN+3.82(R2= 0.95,P < 0.01).When the concentration of tannic acid up to about 8.0 ~ 12.0 mmol/kg,soil pH keep unchanged.Therefore,we can clearly draw that effects of tannic acid on active aluminum content of the inflection point is not the same in different region of tea garden soil.Low concentration tannic acid can improve the soil content of various forms of aluminum,but with the increase in the amount of tannic acid,the various forms of aluminum content are inhibited.With the soil pH increased,high concentrations tannic acid on the inhibition of the release of active aluminum increased.pH and tannic acid on the total amount of active aluminum garden soil was mutual weakening effect relationship.

Achieving macroscale superlubricity with ultra-short running-in period by using polyethylene glycol-tannic acid complex green lubricant

Superlubricating materials can greatly reduce the energy consumed and economic losses by unnecessary friction.However,a long pre-running-in period is indispensable for achieving superlubricity;this leads to severe wear on the surface of friction pairs and has become one of the important factors in the wear of superlubricating materials.In this study,a polyethylene glycol-tannic acid complex green liquid lubricant(PEG10000-TA)was designed to achieve macroscale superlubricity with an ultrashort running-in period of 9 s under a contact pressure of up to 410 MPa,and the wear rate was only 1.19×10^(–8)mm^(3)·N^(−1)·m^(−1).This is the shortest running-in time required to achieve superlubricity in Si_(3)N_(4)/glass(SiO_(2)).The results show that the strong hydrogen bonds between PEG and TA molecules can significantly reduce the time required for the tribochemical reaction,allowing the lubricating material to reach the state of superlubrication rapidly.Furthermore,the strong hydrogen bond can share a large load while fixing free water molecules in the contact zone to reduce shear interaction.These findings will help advance the use of liquid superlubricity technology in industrial and biomedical.

Tannic acid coated single-wall carbon nanotube membranes for the recovery of Au from trace-level solutions

The efficient recovery of gold from industrial sewage is important for saving precious metals and remains a big challenge.We report the extraction of gold ions from a trace-level aqueous solution using a tannic acid(TA)coated single-wall carbon nanotube(SWCNT)film.The TA has many redox ligands that efficiently adsorb Au(III)from the solution and reduce them to Au particles.The interwoven SWCNTs not only act as a framework to improve the mechanical stability of the hybrid membrane,but also provide abundant paths for H_(2)O transport,and facilitate the full exposure of the TA.As a result,the hybrid membrane has an excellent ability to capture gold ions from solution with a high flux of 157 L/(m^(2)·h·bar),and an ultra-high adsorption capacity of 2095 mg/g from solutions with an extremely low gold concentration of 20 ppm.The adsorbed gold ions are reduced to Au particles,which can be easily collected by oxidation.The recovered Au nanoparticles on the TA–SWCNT hybrid film had a remarkable surface-enhanced Raman scattering effect that enabled the sensitive detection of rhodamine 6G.