To solve the first-order differential equation derived from the problem of a free-falling object and the problem arising from Newton’s law of cooling, the study compares the numerical solutions obtained from Picard’...To solve the first-order differential equation derived from the problem of a free-falling object and the problem arising from Newton’s law of cooling, the study compares the numerical solutions obtained from Picard’s and Taylor’s series methods. We have carried out a descriptive analysis using the MATLAB software. Picard’s and Taylor’s techniques for deriving numerical solutions are both strong mathematical instruments that behave similarly. All first-order differential equations in standard form that have a constant function on the right-hand side share this similarity. As a result, we can conclude that Taylor’s approach is simpler to use, more effective, and more accurate. We will contrast Rung Kutta and Taylor’s methods in more detail in the following section.展开更多
This paper investigates the magnetohydrodynamic （MHD） boundary layer flow of an incompressible upper-convected Maxwell （UCM） fluid over a porous stretching surface. Similarity transformations are used to reduce th...This paper investigates the magnetohydrodynamic （MHD） boundary layer flow of an incompressible upper-convected Maxwell （UCM） fluid over a porous stretching surface. Similarity transformations are used to reduce the governing partial differential equations into a kind of nonlinear ordinary differential equations. The nonlinear prob- lem is solved by using the successive Taylor series linearization method （STSLM）. The computations for velocity components are carried out for the emerging parameters. The numerical values of the skin friction coefficient are presented and analyzed for various parameters of interest in the problem.展开更多
A new numerical method of integrating the nonlinear evolution equations, namely the Taylor expansion method, was presented. The standard Galerkin method can be viewed as the 0_th order Taylor expansion method; while t...A new numerical method of integrating the nonlinear evolution equations, namely the Taylor expansion method, was presented. The standard Galerkin method can be viewed as the 0_th order Taylor expansion method; while the nonlinear Galerkin method can be viewed as the 1_st order modified Taylor expansion method. Moreover, the existence of the numerical solution and its convergence rate were proven. Finally, a concrete example, namely, the two_dimensional Navier_Stokes equations with a non slip boundary condition,was provided. The result is that the higher order Taylor expansion method is of the higher convergence rate under some assumptions about the regularity of the solution.展开更多
The Reproducing Kernel Particle Method (RKPM) is one of several new meshless numerical methods de- veloped internationally in recent years. The ideal elasto-plastic constitutive model of material under a Taylor impact...The Reproducing Kernel Particle Method (RKPM) is one of several new meshless numerical methods de- veloped internationally in recent years. The ideal elasto-plastic constitutive model of material under a Taylor impact is characterized by the Jaumann stress- and strain-rates. An updated Lagrangian format is used for the calculation in a nu- merical analysis. With the RKPM, this paper deals with the calculation model for the Taylor impact and deduces the control equation for the impact process. A program was developed to simulate numerically the Taylor impact of projec- tiles composed of several kinds of material. The simulation result is in good accordance with both the test results and the Taylor analysis outcome. Since the meshless method is not limited by meshes, it is believed to be widely applicable to such complicated processes as the Taylor impact, including large deformation and strain and to the study of the dy- namic qualities of materials.展开更多
A generalized Taylor series of a complex function was derived and some related theorems about its convergence region were given. The generalized Taylor theorem can be applied to greatly enlarge convergence regions of...A generalized Taylor series of a complex function was derived and some related theorems about its convergence region were given. The generalized Taylor theorem can be applied to greatly enlarge convergence regions of approximation series given by other traditional techniques. The rigorous proof of the generalized Taylor theorem also provides us with a rational base of the validity of a new kind of powerful analytic technique for nonlinear problems, namely the homotopy analysis method.展开更多
文摘To solve the first-order differential equation derived from the problem of a free-falling object and the problem arising from Newton’s law of cooling, the study compares the numerical solutions obtained from Picard’s and Taylor’s series methods. We have carried out a descriptive analysis using the MATLAB software. Picard’s and Taylor’s techniques for deriving numerical solutions are both strong mathematical instruments that behave similarly. All first-order differential equations in standard form that have a constant function on the right-hand side share this similarity. As a result, we can conclude that Taylor’s approach is simpler to use, more effective, and more accurate. We will contrast Rung Kutta and Taylor’s methods in more detail in the following section.
文摘This paper investigates the magnetohydrodynamic （MHD） boundary layer flow of an incompressible upper-convected Maxwell （UCM） fluid over a porous stretching surface. Similarity transformations are used to reduce the governing partial differential equations into a kind of nonlinear ordinary differential equations. The nonlinear prob- lem is solved by using the successive Taylor series linearization method （STSLM）. The computations for velocity components are carried out for the emerging parameters. The numerical values of the skin friction coefficient are presented and analyzed for various parameters of interest in the problem.
文摘A new numerical method of integrating the nonlinear evolution equations, namely the Taylor expansion method, was presented. The standard Galerkin method can be viewed as the 0_th order Taylor expansion method; while the nonlinear Galerkin method can be viewed as the 1_st order modified Taylor expansion method. Moreover, the existence of the numerical solution and its convergence rate were proven. Finally, a concrete example, namely, the two_dimensional Navier_Stokes equations with a non slip boundary condition,was provided. The result is that the higher order Taylor expansion method is of the higher convergence rate under some assumptions about the regularity of the solution.
基金Project /s50674002 supported by the National Natural Science Foundation of China
文摘The Reproducing Kernel Particle Method (RKPM) is one of several new meshless numerical methods de- veloped internationally in recent years. The ideal elasto-plastic constitutive model of material under a Taylor impact is characterized by the Jaumann stress- and strain-rates. An updated Lagrangian format is used for the calculation in a nu- merical analysis. With the RKPM, this paper deals with the calculation model for the Taylor impact and deduces the control equation for the impact process. A program was developed to simulate numerically the Taylor impact of projec- tiles composed of several kinds of material. The simulation result is in good accordance with both the test results and the Taylor analysis outcome. Since the meshless method is not limited by meshes, it is believed to be widely applicable to such complicated processes as the Taylor impact, including large deformation and strain and to the study of the dy- namic qualities of materials.
文摘A generalized Taylor series of a complex function was derived and some related theorems about its convergence region were given. The generalized Taylor theorem can be applied to greatly enlarge convergence regions of approximation series given by other traditional techniques. The rigorous proof of the generalized Taylor theorem also provides us with a rational base of the validity of a new kind of powerful analytic technique for nonlinear problems, namely the homotopy analysis method.
